In the derived column task you can choose each column and write an expression for each column. But when you need to do a <ISNULL(status) ? "0" : statusdato> on 40-50 columns it get kind of irritating. Is there a way easy to do the sam expression on a selection of columns like a sort of derived column task, where you write an expression and assign that to a selection of columns (otherwise this would be a wish :-) )
View 3 RepliesHere is my replace query and I need to run this on every column in mytable. Right now I manually enter the column name (_LANGUAGES_SPOKEN)but this is time consuming and would like to automate this process asmuch as possible.Update PROFILESET LANGUAGES_SPOKEN = replace(cast(_LANGUAGES_SPOKEN asnvarchar(255)),char(13)+char(10),':')Thanks,JP
View 6 Replies View RelatedHI,
I AM HAVING A TABLE WHICH HAS INCREMENTAL COLUMNS,WHERE COLUMNS GETS ADDED EVERY MONTH TO THE TABLE AND THE TABLE THEN CONTAINS PREVIOUS MONTH AND PRESENT MONTH DATA ABOUT CUSTOMERS ,DETAILS AND TRANSACTIONS.
THE PROBLEM WITH THIS DATA IS ,IF THE CUSTOMER IS NEW ,THEN IN PREVIOUS MONTHS HIS INFORMATION IS NULL,WHICH HAVE TO BE CODED HAS "NOT PRESENT".
NOW,
HOW DO WE CONVERT ALL THE PREVIOUS COLUMNS FOR A PARTICULAR CUSTOMER HAS NULL AT THE SAME TIME ?.
HERE IS HOW THE PROC WRITTENED FOR IT GOES :-
DROP PROCEDURE DE_NAT
CREATE PROCEDURE DE_NAT
AS
BEGIN
DECLARE @MONMIN1 NVARCHAR(100),MON NVARCHAR(100),@YEAR NVARCHAR(100) , @MONYEAR NVARCHAR(100)
SET @MONMIN1 = DATENAME((MONTH),DATEADD(MONTH,-1,GETDATE()))
SET @MON = MONTH(GETDATE())
SET @YEAR = YEAR(GETDATE())
SET @MONYEAR = @MON + @YEAR
EXEC('select A.CUSTOMERS,B.*,CAST(A.RFM_40D AS FLOAT) AS R40
INTO TSD_' + @MONYEAR
+ ' from TSD_20 A
LEFT OUTER JOIN SD20 ' + @MONMIN1 + ' B
ON A.CUSTOMERS = B.CUSTOMER')
END
THIS PROC JUST ADDS THE PRESENT MONTHS DATA TILL LAST MONTHS DATA.
BUT IF A CUSTOMER IS NEW, THEN HOW DO I REPLACE THE NULL VALUES FOR THE PREVIOUS DATA TO 'NOT PRESENT'
FOR EG :- IF THERE IS A NEW CUSTOMER ,HOW DO WE CHANGE :-
CUSTOMERS ERTYYTRE RTYUUYTR TYUIIUYT QWERREWQ DFGHHGFD
----------- ---------- ---------- ---------- ----------- ----------
101023 <NULL> <NULL> <NULL> <NULL> 1.0
102022 1.0 1.62.3 3.4 4.5
NOW, AS YOU CAN SEE, THAT FOR CUSTOMERS = '101023'.
THE COLUMN DFGHHGFD IS, THIS MONTHS DATA , I WANT TO CHANGE ALL NULL VALUES PRESIDING IT AS "INACTIVE"
CAN I CHANGE , ALL COLUMNS FROM NULL TO "INACTIVE" , AT THE SAME TIME. ?
AS NEXT MONTH, AGAIN THE COLUMNS IS GONNA INCREASE WHICH WILL
AGAIN CAUSE A PROBLEM .
PLS TELL ME A METHOD , SO THAT I CAN DO THE NEEDFUL.
I need to pass 3 column values and one Formula string into 4 replace statements and output the result in one column.
Nesting them in the usual way doesn't seem to work as that only allows for one column.
My table consits of four columns...PF (numeric), Hours (numeric), TotalNumber INT, and Formula (nvatchar)
My function needs to search and replace the Formula column for instances of all the three number columns and output the formula as a mathmatical formula rather than a string.
Here is what I have so far which works fine if all three columns have a value, but if only one is null then it will retrun NULL and not the other two values.
FUNCTION GetFormula
(@numPF NUMERIC(10,2), @numHours NUMERIC(10,2), @intTotalNumber INT, @strFormula nvarChar(200)) RETURNS nvarchar(200)
AS
BEGIN
DECLARE @strExpression nvarchar(200)
SELECT @strExpression=REPLACE(@strFormula, 'TotalNumber',@intTotalNumber)
SELECT @strExpression=REPLACE(@strExpression, 'PF',@numPF )
SELECT @strExpression=REPLACE(@strExpression, 'Hours',@numHours )
RETURN @strExpression
END
Many Thanks
Hello:
I am running into an issue with RS2k PDF export.
Case: Exporting Report to PDF/Printing/TIFF
Report: Contains 1 table with 19 Columns. 1 column is static, the other 18 are visible at the users descretion. Report when printed/exported to pdf spans 2 pages naturally, 16 on the first page, 3 on the second, and the column widths have been adjusted to provide a perfect page span .
User A elects to hide two of the columns, and show the rest. The report complies and the viewable version is perfect, the excel export is perfect.. the PDF export on the first page causes every fith column, starting with the last column that was hidden to be expanded to take up additional width. On the spanned page, it renders the first column on that page correctly, then there is a white space gap equal to the width of the hidden columns and then the rest of the cells show with the last column expanded to take up the same width that the original 2 columns were going to take up, plus its width.
We have tried several different settings to see if it helps this issue or makes it worse. So far cangrow/canshrink/keep together have made no impact. It is not possible to increase the page size due to limited page size selection availablility for the client. There are far too many combinations of what the user can elect to show or hide to put together different tables to show and hide on the same report to remove this effect.
Any help or suggestion on this issue would be appreciated
I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:
I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.
1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B
If updated my query (see below) and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.
2. My second question: How to i get around this error?
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B, fnSplitJson2(A.ITEM6,NULL) C
I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.
I'd like to first figure out the count of how many rows are not the Current Edition have the following:
Second I'd like to be able to select the primary key of all the rows involved
Third I'd like to select all the primary keys of just the rows not in the current edition
Not really sure how to describe this without making a dataset
CREATE TABLE [Project].[TestTable1](
[TestTable1_pk] [int] IDENTITY(1,1) NOT NULL,
[Source_ID] [int] NOT NULL,
[Edition_fk] [int] NOT NULL,
[Key1_fk] [int] NOT NULL,
[Key2_fk] [int] NOT NULL,
[Code] .....
Group by fails me because I only want the groups where the Edition_fk don't match...
Here is My requirement, I'm not sure if this is possible. Creating table called master like col1, col2 col3, col4 , col5 ...Where Col1, col2 are updatable - this can be done easily
Col3, col4 are columns in another table but these can be just a read only ?? Is this possible ? this is possible with View but not friendly with share point CRUD...Col 5 is a computed column of col 2 and col5 ? if above step can be done then sure this can be done I guess.
I have query which retrieves multiple column vary from 5 to 15 based on input parameter passed.I am using table to map all this column.If column is not retrieved in the dataset(I am not talking abt Null data but column is completely missing) then I want to hide it in my report.
Can I do that??
Any reply showing me the right way is appricited.
-Thanks,
Digs
Hi, all experts here,
Thanks a lot for your kind attention.
As I am creating the non-clustered indexes for the tables, I dont quite understand how dose it really matter to put the columns in the index key columns or put them into the included columns of the index?
I am really confused about that and I am looking forward to hearing from you and thank you very much again for your advices and help.
With best regards,
Yours sincerely,
Here's another one of my bitchfest about stuff which annoy the *** out of me in SSIS (and no such problems in DTS):
Do you ever wonder how easy it was to set up text file to db transform in DTS - I had no problems at all. In SSIS - 1 spent half a day trying to figure out how to get proper column data types for text file - OF Course MS was brilliant enough to add "Suggest Types" feature to text file connection manager - BUT guess what - it sample ONLY 1000 rows - so I tried to change that number to 50000 and clicked ok - BUT ms changed it to 1000 without me noticing it - SO NO WONDER later on some of datatypes did not match. And boy what a fun it is to change the source columns after you have created a few transforms.
This s**hit just breaks... So a word about Derived Columns - pretty useful feature heh? ITs not f***ing useful if it DELETES SOME of the Code itself after there have been changes in dataflow. I cant say how pissed off im about that SSIS went ahead and deleted columns from flow & messed up derived columns just because the lineageIDs dont match.
Meta-data - it would be useful if you could change it and refresh it - im just sick and tired of it that it shows warnings and errors when there's nothing wrong - so after a change i need to doubleclick all my transforms so that those red & yellow boxes would disappear.
Oh and y I passionately dislike Derived columns - so you create new fields based on some data - you do some stuff - combine multiple columns to one, but you have no way saying remove the columns from the pipeline. Y you need it - well if you have 50K + rows with 30+ columns then its EXTRA useless memory overhead for your package.
Hopefully one day I will understand how SSIS works (not an ez task I say) - I might be able to spend more time on development and less time on my bitchfest - UNTIL then --> Another Day - Another Hassle with SSIS
Basically, I'm given a daily schedule on two separate rows for shift 1 and shift 2 for the same employee, I'm trying to align both shifts in one row as shown below in 'My desired results' section.
Sample Data:
;WITH SampleData ([ColumnA], [ColumnB], [ColumnC], [ColumnD]) AS
(
SELECT 5060,'04/30/2015','05:30', '08:30'
UNION ALL SELECT 5060, '04/30/2015','13:30', '15:30'
UNION ALL SELECT 5060,'05/02/2015','05:30', '08:30'
UNION ALL SELECT 5060, '05/02/2015','13:30', '15:30'
[Code] ....
The results from the above are as follows:
columnAcolumnB SampleTitle1 SampleTitle2 SampleTitle3 SampleTitle4
506004/30/201505:30 NULL NULL NULL
506004/30/201513:30 15:30 NULL NULL
506005/02/201505:30 NULL NULL NULL
506005/02/201513:30 15:30 NULL NULL
My desired results with desired headers are as follows:
PERSONSTARTDATE STARTIME1 ENDTIME1 STARTTIME2 ENDTIME2
506004/30/2015 05:30 08:30 13:30 15:30
506005/02/2015 05:30 08:30 13:30 15:30
Hello,Using SQL Server 2000, I'm trying to put together a query that willtell me the following information about a view:The View NameThe names of the View's columnsThe names of the source tables used in the viewThe names of the columns that are used from the source tablesBorrowing code from the VIEW_COLUMN_USAGE view, I've got the codebelow, which gives me the View Name, Source Table Name, and SourceColumn Name. And I can easily enough get the View columns from thesyscolumns table. The problem is that I haven't figured out how tolink a source column name to a view column name. Any help would beappreciated.Garyselectv_obj.name as ViewName,t_obj.name as SourceTable,t_col.name as SourceColumnfromsysobjects t_obj,sysobjects v_obj,sysdepends dep,syscolumns t_colwherev_obj.xtype = 'V'and dep.id = v_obj.idand dep.depid = t_obj.idand t_obj.id = t_col.idand dep.depnumber = t_col.colidorder byv_obj.name,t_obj.name,t_col.name
View 2 Replies View RelatedI am working on a Statistical Reporting system where:
Data Repository: SQL Server 2005
Business Logic Tier: Views, User Defined Functions, Stored Procedures
Data Access Tier: Stored Procedures
Presentation Tier: Reporting ServicesThe end user will be able to slice & dice the data for the report by
different organizational hierarchies
different number of layers within a hierarchy
select a organization or select All of the organizations with the organizational hierarchy
combinations of selection criteria, where this selection criteria is independent of each other, and also differeBelow is an example of 2 Organizational Hierarchies:
Hierarchy 1
Country -> Work Group -> Project Team (Project Team within Work Group within Country)
Hierarchy 2
Client -> Contract -> Project (Project within Contract within Client)Based on 2 different Hierarchies from above - here are a couple of use cases:
Country = "USA", Work Group = "Network Infrastructure", Project Team = all teams
Country = "USA", Work Group = all work groups
Client = "Client A", Contract = "2007-2008 Maint", Project = "Accounts Payable Maintenance"
Client = "Client A", Contract = "2007-2008 Maint", Project = all
Client = "Client A", Contract = allI am totally stuck on:
How to implement the data interface (Stored Procs) to the Reports
Implement the business logic to handle the different hierarchies & different number of levelsI did get help earlier in this forum for how to handle a parameter having a specific value or NULL value (to select "all")
(WorkGroup = @argWorkGroup OR @argWorkGrop is NULL)
Any Ideas? Should I be doing this in SQL Statements or should I be looking to use Analysis Services.
Thanks for all your help!
Hi,
I am planning to use transacational replication (instead of merge replication) on my SQL server 2000. My application is already live and is being used by real users.
How can I ensure that replicated data on different server would have exact same values of identity columns and date columns (where every I set default date to getdate())?
It is very important for me to have a mirror image of data (without using clustering servers).
Any help would be appreciated.
Thanks,
-Niraj
Basically I need to get the SUM of the sum of three columns and all three columns have nulls. To make it more complicated, the result set must return the top 20 in order desc as well.
I keep facing different issues whether I try and use Coalesce, IsNull, Sum, count, anything. My query never returns anything but 0 or NULL regardless of if I am trying to build a CTE or just use a query.
So I'm using Col A to get the TOP 20 in order (which is fine) but also trying to add together the sums of Col A + Col B + Col C for each of the twenty rows...
MS SQL 2008 R2
I have the following effectively random numbers in a table:
n1,n2,n3,n4,SCORE
1,2,5,9,i
5,20,22,25,i
6,10,12,20,i
I'd like to generate the calculated column SCORE based on various scenarios in the other columns. eg.
if n1<10 and n2<10 then i=i + 1
if n4-n3=1 then i=i + 1
if more than 2 consecutive numbers then i=i + 1
So, I need to build the score. I've tried the procedure below and it works as a pass or fail but is too limiting. I'd like something that increments the variable @test1.
declare @test1 int
set @test1=0
select top 10 n1,n2,n3,n4,n5,n6,
case when (
n1=2 and
n2>5
)
then @test1+1
else @test1
end as t2
from
allNumbers
Hi all i have a question regarding sql, i want to replace some characters...
any knows simply how to do this?
I want to replace "999-25000-69" by "9992500069"
grtz
i got a 100k rows column contain first name + last name. but half of them are got comma between first and last name. how can i update and remove all the comma. can anyone provide a statment please thanks so much
View 2 Replies View Relatedcan I use a replace on text type field?
View 1 Replies View Relatedhi
when i execute ...
select * from Members where address = '6257 Rockwell's'
ERROR :
Server: Msg 170, Level 15, State 1, Line 1
Line 1: Incorrect syntax near 's'.
Server: Msg 105, Level 15, State 1, Line 1
Unclosed quotation mark before the character string '
'.
Kindly help me how to solve '
i just wanna replace the last word 'roa' to 'road'
what is wrong with my code. I dont relaly see any problem. But it's replaceing all the 'roa' to 'road'.
declare @table table(ad_str1 varchar(20))
insert @table
select 'street road roa' union all
select 'street street'
select ltrim(right(ad_str1, charindex(' ', reverse(ad_str1)))) from @table
update @table
set ad_str1 = replace(ad_str1, ltrim(right(ad_str1, charindex(' ', reverse(ad_str1)))), 'road')
where ltrim(right(ad_str1, charindex(' ', reverse(ad_str1)))) = 'roa'
select * from @table
I have a colunm in a table that has a list of email address.
I want to remove a certain email address from that colunm, but it is in 54 different rows. What is the best way to do this ?
Dear all,
here is one query,
IF EXISTS (SELECT SUM(DEBIT_AMOUNT) FROM @Ledger
HAVING SUM(DEBIT_AMOUNT)<>SUM(CREDIT_AMOUNT))
i'm trying to tuning myprocedures. i think having is not good enough to use.
how can we replace having in this case.....
thank you very much
Vinod
Even you learn 1%, Learn it with 100% confidence.
Hi everyone,
I have wriiten a query that works great in sql server but MS Access does not support EXCEPT. I have to rewrite this query using 'IN' or 'NOT IN' but can not figure it out because it must be compared on all fields. I'm sure this will require multiple subqueries because 'IN' must return only one field but I can not rap my brain around it. Could someone please help with this? Here is the 'EXCEPT' query I know works.
Code Snippet
SELECT DISTINCT sh.Member_Nbr, sh.Account_Nbr, st.Share_Desc,
sh.Balance, sh.Available_Bal FROM
(((SHARE sh INNER JOIN AccountIndividual ac ON ac.Member_Nbr =
sh.Member_Nbr AND ac.Account_Nbr = sh.Account_Nbr)
INNER JOIN SHARETYPE st ON sh.Share_Type = st.Share_Type_ID) INNER JOIN
Participation_Type ON ac.Participation_Id = Participation_Type.ID)
WHERE ac.INDIVIDUAL_ID = 5249
Except
SELECT DISTINCT sh.Member_Nbr, sh.Account_Nbr, st.Share_Desc,
sh.Balance, sh.Available_Bal FROM
(((SHARE sh INNER JOIN AccountIndividual ac ON ac.Member_Nbr =
sh.Member_Nbr AND ac.Account_Nbr = sh.Account_Nbr)
INNER JOIN SHARETYPE st ON sh.Share_Type = st.Share_Type_ID) INNER JOIN
Participation_Type ON ac.Participation_Id = Participation_Type.ID)
WHERE ((ac.participation_id <> 101) AND (sh.share_type > 49 )) AND (ac.Individual_Id = 5249); This code gets me close using 'IN'.
Code Snippet
SELECT DISTINCT sh.Member_Nbr, sh.Account_Nbr, st.Share_Desc,
sh.Balance, sh.Available_Bal FROM
(((SHARE sh INNER JOIN AccountIndividual ac ON ac.Member_Nbr =
sh.Member_Nbr AND ac.Account_Nbr = sh.Account_Nbr)
INNER JOIN SHARETYPE st ON sh.Share_Type = st.Share_Type_ID) INNER JOIN
Participation_Type ON ac.Participation_Id = Participation_Type.ID)
WHERE (ac.INDIVIDUAL_ID = 5249) AND sh.member_nbr not in
(SELECT sh.member_nbr from Share sh inner join accountindividual ac on sh.member_nbr = ac.member_nbr AND sh.account_nbr = ac.account_nbr
WHERE ac.participation_id <> 101 AND sh.share_type > 49) AND sh.account_nbr not in
(SELECT sh.account_nbr from share sh inner join accountindividual ac on sh.member_nbr = ac.member_nbr AND sh.account_nbr = ac.account_nbr
WHERE ac.participation_id <> 101 AND sh.share_type > 49)
To ensure I don't leave orphans floating around in tables when records get deleted (values from one record might link to values in another) how do I find and possibly replace values in tables?For example, if I have a unit of measure table and want to delete the value "inches", how do I look in other tables to find this value and give the user the option to cancel or clear it out. If I don't it will cause controls bound to that value like the dropdownlist to throw an error.
View 1 Replies View RelatedHi all,
I made a migration operation and when I am looking inside database I can see the <BR> tags.
The question is how to write a query that replace all of this occurances of <BR> inside the colum table, with CLRF which is a new line code.
Thanks in advance.
I have the following:----------------- WHILE PATINDEX('%,%',@Columns)<> 0 BEGINSELECT @Separator_position = PATINDEX('%,%',@Columns)SELECT @array_Value = LEFT(@Columns, @separator_position - 1)SET @FieldTypeID = (SELECT FieldTypeID FROM [Form].[Fields] WHERE FieldID = (CAST(@array_Value AS INT)))SET @FieldName = (SELECT [Name] FROM [Form].[Fields] WHERE FieldID = @array_Value)print 'arry value' + CONVERT(VarChar(500), @array_value)print 'FieldTypeID: ' + CONVERT(VARCHAR(500), @FieldTypeID)PRINT 'FieldName: ' + @FieldNameBEGINIF @FieldTypeID = 1 OR @FieldTypeID = 2 OR @FieldTypeID = 3 OR @FieldTypeID = 9 OR @FieldTypeID = 10 OR @FieldTypeID = 7BEGINSET @InnerItemSelect = ' (SELECT ISNULL(CONVERT(VARCHAR(MAX),[Value]),'''') FROM [Item].[ItemDetailFieldRecords] IDFR WHERE IDFR.ItemDetailID = ID.ItemDetailID AND IDFR.FieldID = ' + @array_Value + ') AS ''' + @FieldName + ''' 'SET @InnerTaskSelect = ' (SELECT ISNULL(CONVERT(VARCHAR(MAX),[Value]),'''') FROM [Item].[TaskFieldRecords] TFR WHERE TFR.TaskID = T.TaskID AND TFR.FieldID = ' + @array_Value + ') AS ''' + @FieldName + ''' 'ENDELSE IF @FieldTypeID = 4 OR @FieldTypeID = 8 --DropDownList/RadioButtonlistBEGINSET @InnerItemSelect = ' (SELECT [Value] FROM [Form].[FieldListValues] FFLV INNER JOIN [Item].[ItemDetailFieldListRecords] IDFLR ON FFLV.FieldListValueID = IDFLR.FieldListValueID WHERE IDFLR.ItemDetailID = ID.ItemDetailID AND FFLV.FIeldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'SET @InnerTaskSelect = ' (SELECT [Value] FROM [Form].[FieldListValues] FFLV INNER JOIN [Item].[TaskFieldListRecords] TFLR ON FFLV.FieldListValueID = TFLR.FieldListValueID WHERE TFLR.TaskID = T.TaskID AND FFLV.FIeldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'ENDELSE IF @FieldTypeiD = 5 --CascadingBEGINSET @InnerItemSelect = ' (SELECT [FCV].[Value] FROM [Form].[FieldCascadingValues] FCV INNER JOIN [Form].[FieldCascadingLookUpTables] LT ON FCV.FIeldCascadingLookupTableID = LT.FieldCascadingLookupTableID INNER JOIN [Item].[ItemDetailFieldCascadingRecords] IDFCR ON IDFCR.FieldCascadingValueID = FCV.FieldCascadingValueID WHERE IDFCR.ItemDetailID = ID.ItemDetailID AND LT.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'SET @InnerTaskSelect = ' (SELECT [FCV].[Value] FROM [Form].[FieldCascadingValues] FCV INNER JOIN [Form].[FieldCascadingLookUpTables] LT ON FCV.FIeldCascadingLookupTableID = LT.FieldCascadingLookupTableID INNER JOIN [Item].[TaskFieldCascadingRecords] TFCR ON TFCR.FieldCascadingValueID = FCV.FieldCascadingValueID WHERE TFCR.TaskID = T.TaskID AND LT.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'ENDELSE IF @FieldTypeiD = 6 --ListBoxBEGINSET @InnerItemSelect = ' (SELECT i.[CSV] FROM @ItemDetailLV i WHERE i.ID = ID.ItemDetailID AND i.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'SET @InnerTaskSelect = ' (SELECT it.[CSV] FROM @TaskLV it WHERE it.ID = T.TaskID AND it.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'ENDELSE IF @FieldTypeID = 11 --UsersBEGINSET @InnerItemSelect = ' (SELECT SU.[UserID] FROM [Security].[Users] SU INNER JOIN [Item].[ItemDetailUserRecords] IDUR ON SU.UserID = IDUR.UserID WHERE IDUR.ItemDetailID = ID.ItemDetailID AND IDUR.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'SET @InnerTaskSelect = ' (SELECT SU.[UserID] FROM [Security].[Users] SU INNER JOIN [Item].[TaskUserRecords] TUR ON SU.UserID = TUR.UserID WHERE TUR.TaskID = T.TaskID AND TUR.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'ENDELSE IF @FIelDTypeID = 12 --GroupBEGINSET @InnerItemSelect = ' (SELECT SG.[GroupID] FROM [Security].[Groups] SG INNER JOIN [Item].[ItemDetailGroupRecords] IDGR ON SG.GroupID = IDGR.GroupID WHERE IDGR.ItemDetailID = ID.ItemDetailID AND IDGR.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'SET @InnerTaskSelect = ' (SELECT SG.[GroupID] FROM [Security].[Groups] SG INNER JOIN [Item].[TaskGroupRecords] TGR ON SG.GroupID = TGR.GroupID WHERE TGR.TaskID = T.TaskID AND TGR.FieldID = ' + @array_value + ') AS ''' + @FieldName + ''' 'ENDENDPRINT 'Inner Item Select:' + @InnerItemSelectPRINT 'Inner Task Select:' + @InnerTaskSelectSET @IDSelect = @IDSelect + @InnerItemSelect + ', 'SET @TSelect = @TSelect + @InnerTaskSelect + ', 'SELECT @Columns = STUFF(@Columns, 1, @separator_position, '')END --------------- That is only part of a large query that writs a SQL Query to a column in a Database. That Query (in the column) is just ran normally so I don't need to compile it each time I want to run it.THe problem I have is @FieldName might be: ryan's field. That apostrophe is killing me because the SQL keeps it as ryan's field, not ryan''s field(note the 2 apostrophes). I cannot do: REPLACE(@FieldName, ''', '''') because it's not closing the apostrophes. Is there an escape character that I can use to say only one: ' ?Would the only solution be to put: ryan''s field into the Database, and just format it properly on the output? Thanks.
View 4 Replies View RelatedHi,
I am having a situation where I need to update a column in my SQL table that contains a link to an image file. Basically ...
I have this stored in a column IMAGESRC
Project/aa11be5d-dd9e-48c8-9d8c-6a972e996b28/ProjectImages/702d_2.jpg I need to change it to this
Project/NEWUSERID/ProjectImages/702d_2.jpg
How can I accomplish this in SQL???
thanks in Advance
Dollarjunkie
Hi,
I have a table with a field called productname, and it has about 5000 rows, and within that about 1000 have a productname that has 'NIB' in the name, ie "My Product NIB DVD" and I have been asked to replace 'NIB' with 'New' ie "My Product New DVD" Can I do this in SQL using an Update statement? Or do I have build something in maybe asp.net to use a replace function to change the name.
Thanks
I'm not sure how to use REPLACE here. The Query following REPLACE returns a string whose format is A B C D and I'm trying to convert it to 'A','B','C','D' I'm doing something wrong because query analyzer doesn't like something about the way I've written this.
WHERE (a_Name_Symbol.Symbol IN REPLACE(SELECT Portfolio_Symbols FROM a_Users_Portfolios WHERE (UserID = @UserID) AND (Portfolio_Name = @Portfolio_Name),'''','''''')
Entire SPROC
-------------------------------------------------------------------------------------------------
CREATE PROCEDURE _premium_BSH (@Portfolio_Name NVarChar (50), @UserID int, @Symbol VarChar (1500)) AS
SELECT a_Name_Symbol.Name, a_Name_Symbol.Symbol, a_Industry.Industry, a_Sector.Sector, a_Quarter_Index.Period, a_Technical_Signals.Signal,
a_Technical_Signals.[Date], a_Financials.Revenue, a_Financials.Income, a_Financials.EPS, a_Financials.Margin_Net AS [Net Margin],
a_Financials.PE, a_Hyperlinks.Yahoo_Main AS Yahoo, a_Hyperlinks.MSN_10Qs AS Financials, a_Hyperlinks.MSN_events AS Events,
a_Hyperlinks.StockCharts AS Technicals
FROM a_Financials INNER JOIN
a_Hyperlinks ON a_Financials.Yahoo_Main = a_Hyperlinks.Yahoo_Main INNER JOIN
a_Industry ON a_Financials.Industry = a_Industry.Industry INNER JOIN
a_Sector ON a_Financials.Sector = a_Sector.Sector INNER JOIN
a_Name_Symbol ON a_Financials.Symbol = a_Name_Symbol.Symbol INNER JOIN
a_Technical_Signals ON a_Name_Symbol.Symbol = a_Technical_Signals.Symbol INNER JOIN
a_Quarter_Index ON a_Financials.Period = a_Quarter_Index.Period
WHERE (a_Name_Symbol.Symbol IN REPLACE(SELECT Portfolio_Symbols FROM a_Users_Portfolios WHERE (UserID = @UserID) AND (Portfolio_Name = @Portfolio_Name),'''','''''') AND (NOT (a_Technical_Signals.Signal IS NULL)) AND (a_Quarter_Index.Period = '2003 Q3')
ORDER BY a_Name_Symbol.Name, a_Technical_Signals.Signal
GO
Does anybody know how to search through all stored procedures (in SQL Server 2000) and find and replace text without having to open each one individually in Query Analyzer and doing so one at a time?
That would be so time consuming. I want to be able to change my table names, but I have so many stored procedures allready using the old names. To go and find each name and replacing them is a task I don't want to even try and do.
Thank you to whomever can help.
Alec
I am using MSDE. In this I have a field that contains a desciption. Prior to saving to the db, I replace all vbcrlf's to <br />'s. That works fine when displaying in HTML, but when I display it in a datagrid, I want to replace the <br />'s with vbcrlf's.
I thought I might be able to do it with a replace function in my SQL query, something like "Select ID, replace(Description, '<br />', vbcrlf) as Description". This produces an error that vbcrlf is not a fieldname. So I tried "select replace(Description, '<br />', 'xxx') as Description", and while this did not create an error, neither was the text replaced.
Am I not using the replace function correctly? Is there another way in which I might accomplish the task?
Dim ConnectionString As String = "server='(local)'; trusted_connection=true; database=dbname"
Dim CommandText As String
'Command text is greatly abreviated for this discussion.
CommandText = "Select ID, replace(Description, '<br />', vbcrlf) as Description"
Dim myConnection As New SqlConnection(ConnectionString)
Dim myCommand As New SqlDataAdapter(CommandText, myConnection)
Dim ds As New DataSet()
Dim dv as new dataview()
myCommand.Fill(ds)
DataGrid1.DataSource = ds
DataGrid1.DataBind()
...
...
...