Dollar Amount - Error Converting Data Type Varchar To Numeric
Aug 6, 2014
I am trying to add a field (bank_chk_amt] from a table in to my query to bring in a dollar amount....I originally had this below
SELECT dbo.CBPAYMENT.REFERENCE_NO, 'CCMCCHBREF' AS Literal, RTrim([description]) + ', ' + [bank_chk_amt] + ', ' + convert(char(10),[check_date],101) + ', ' + 'Refund check sent to ' + [payee_name] AS [Free Text]
FROM dbo.CBPAYMENT;
but I would get "Error converting data type varchar to numeric".So my co-worker modified it and added (str([bank_chk_amt]) to my query which worked, but I noticed it dropped of the cents. So instead of 80.35 it would show 80 And I noticed it rounded 100.50 to 101...How can I bring in the full dollar amount and without adding?
I have a sql code that I am having some difficulty with. All I'm trying to do is get each department and sum the amount by month based on the date in the table. I am getting "error converting data type varchar to numeric".
Code: select DEPARTMENT, CASE WHEN ((DATE >= '06/01/2014') AND (DATE <= '06/30/2014')) THEN (cast(sum(Amount) as decimal(10,2))) ELSE '' END AS 'JUNE', CASE WHEN ((DATE >= '07/01/2014') AND (DATE <= '07/30/2014')) THEN (cast(sum(Amount) as decimal(10,2))) ELSE '' END AS 'JULY' from L27_PHAROS_DETAIL_DATA WHERE Department = 'TECHNOLOGY SERVICES' GROUP BY DEPARTMENT, DATE ORDER BY DEPARTMENT
I try to JOin to tables: Enterprise has a decimal(5,3) and COHIER has varchar 5. All I am getting is an error on converting data. How can I fix this problem.
SELECT a.Security_Value, b.Enterprise_Number, b.Enterprise_Description FROM dbo.COHIER a INNER JOIN dbo.Enterprise b ON a.Security_Value = b.Enterprise_Number
Yes again a topic like this, I couldn't get an answer for my problem so I started a new topic.
Im getting this error for these lines:
$registreer = "INSERT INTO Gebruikerstelefoon (gebruikersnaam, telefoonnummer, volgnr) VALUES ('".$_SESSION['gebruikersnaam']."', '".$_POST["telefoonnummer"]."', '')"; mssql_query($registreer) or die("Fout bij toewijzen telefoonnummer.");
'telefoonnummer' (phonenumber) is nummeric, users can insert their phonenumber in a input field (text) and register along.. ( this is a second query for the column phonennumber) though this doesn't work..
I am having difficulty with my sql and I am not sure what do to. I am new to this. Any help you can give would be helpful.
Here is the statement that is giving me trouble. If I take this out of my Sql query everything runs fine.
CASE clm_att1 WHEN 'NG' THEN (clm_sppo)*(clio_fee04/100) WHEN 'NA' THEN '0.00' WHEN 'AF' THEN (clm_sppo)*(clio_fee04/100)*.65 ELSE '' END as AccessFeeFinal,
CLM_H30 = Case When CLM_H30 = 0.00 Then clm_sppo else clm_H30 End,
clm_prod = CASE WHEN CLMS_sku = 'NEGO' THEN 'NEG' WHEN CLMS_sku = '% OF CHGS' THEN 'NEG' ELSE clm_prod End,
"clm_nego" = CASE WHEN CLM_ATT1 = 'NA' THEN 0.00 WHEN CLM_ATT2 = 'NA' THEN 0.00 WHEN CLM_ATT3 = 'NA' THEN 0.00 WHEN CLM_ATT4 = 'NA' THEN 0.00 ELSE clm_nego END,
"clm_sppo" = CASE WHEN CLM_ATT1 = 'NA' THEN 0.00 WHEN CLM_ATT2 = 'NA' THEN 0.00 WHEN CLM_ATT3 = 'NA' THEN 0.00 WHEN CLM_ATT4 = 'NA' THEN 0.00 ELSE clm_sppo END,
clm_1e, clm.CLM_ATT1 as Note,
CASE clm_att1 WHEN 'NG' THEN (clm_sppo)*(clio_fee04/100) WHEN 'NA' THEN '0.00' WHEN 'AF' THEN (clm_sppo)*(clio_fee04/100)*.65 ELSE '' END as AccessFeeFinal,
CLM_ATT2, CLM_ATT3, clio_fee04 as "ACCESSFEEIMPACT",
"(clm_sppo/CLM_TCHG) * 100" = CASE WHEN CLM_ATT1 = 'NA' THEN 0.00 WHEN CLM_ATT2 = 'NA' THEN 0.00 WHEN CLM_ATT3 = 'NA' THEN 0.00 WHEN CLM_ATT4 = 'NA' THEN 0.00 ELSE (clm_sppo/CLM_TCHG) * 100 END,
clio_wrk1 as MAS90#
FROM dbo.clm clm Join dbo.cli cli ON clm.clm_clir = cli.cli_id1 JOIN dbo.clip clip ON cli.cli_id1 = clip.clip_id1 JOIN dbo.clio clio ON cli.cli_id1 = clio.clio_id1 INNER JOIN dbo.clms clms ON clms.clms_id = clm.clm_id1
WHERE (clip.clip_prd IN ('NEG', 'ADV')) AND (clm_prod = 'ADV' OR clms_sku = 'NEGO' OR clms_sku = '% OF CHGS')AND (CLM_STADES IN ('DONE','DUPO','DUPL'))and clm_adjto = '' AND CLM_TCHG > 0. and (clio.clio_type = 'AC')
I am having problems with a statment that I am writing. The prop_uac is a alpha field and prop_disc is a numeric field. What I was trying to do is when the alpha field is not populated automatically pull from the numeric field. Then I wanted to put all of the results into one column. Can this be done? below is my statement. I hope you can help me.
Prop_uac = CASE WHEN prop_uac = '' THEN prop_disc else prop_uac End
hello everyone... i have some problem to with my trigger.. after execute the trigger.. i got this errro "Msg 8114, Level 16, State 5, Procedure trg_InsertPVReadingMeter, Line 14 Error converting data type varchar to numeric."
below is my command sql table PVReadingMeter
quote:USE [PVMC Database] GO /****** Object: Table [dbo].[PVReadingMeter] Script Date: 03/25/2008 01:18:06 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[PVReadingMeter]( [PV_reading_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_PVReadingMeter_PV_reading_id] DEFAULT (newid()), [PV_reading_date_time] [datetime] NOT NULL, [PV_reading_meter] [decimal](8, 2) NOT NULL, [PV_normalized_monthly_yield] [float] NOT NULL, [PV_normalized_monthly_energy_yield] [float] NOT NULL, [PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_PVReadingMeter_PV_application_id] DEFAULT (newid()), CONSTRAINT [PK_PVReadingMeter] PRIMARY KEY CLUSTERED ( [PV_reading_id] ASC )WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY] ) ON [PRIMARY]
GO USE [PVMC Database] GO ALTER TABLE [dbo].[PVReadingMeter] WITH CHECK ADD CONSTRAINT [FK_PVReadingMeter_Photovoltaic] FOREIGN KEY([PV_application_id]) REFERENCES [dbo].[Photovoltaic] ([PV_application_id]) ON UPDATE CASCADE ON DELETE CASCADE
below is my trigger
quote:set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go
CREATE Trigger [trg_InsertPVReadingMeter] on [dbo].[PVReadingMeter] for insert as begin
SELECT @PVReadingMeter = (SELECT PV_reading_meter + '' FROM Inserted) SELECT @PVNormalizedMonthlyYield = (SELECT PV_normalized_monthly_yield + '' FROM Inserted)
-- Print the name of the new author
PRINT 'The new photovoltaic reading meter"' + @PVReadingMeter +'" is added.' PRINT 'The photovoltaic normalized monthly yield is "' + @PVNormalizedMonthlyYield +'"'
end;
now, this is command to insert the values into PVReadingMeter table using trigger that has been created....
Thank you in advance for your comments/suggestions. I am trying to create a View of a Table. The table is created by another application so I am unable to recreate it they way I want, also the data that is in the columns that I want to CAST are "numbers" not letters and will only be numbers. In the view I need certain columns to be CAST as numeric from varchar.
Here is the syntax that I am currently using:
Code Snippet SELECT CAST(szF1 AS datetime) AS [Login Date/Time], szF2 AS [User Name], CAST(szF3 AS numeric) AS [Documents Indexed], CAST(szF4 AS datetime) AS [Logout Date/Time], CAST(szF5 AS numeric) AS [Documents Sent to QC], CAST(szF6 AS numeric) AS [Documents Reconciled], szF7 AS [Reject Reason], CAST(szF8 AS datetime) AS [Report Date] FROM dbo.F_Report_Data AS a WHERE (szF3 <> 'Blank')
When I open the view I get the error message about converting varchar to numeric.
I have always programmed my ASP pages with MS Access DB's and we recently got a SQL Server 2000. So, I'm totally new to SQL Server 2000. I trying to retrieve data from a table in SQL, based on values from two input fields (text fields) on a form in the web page.
To process the form, I am using the following syntax:
Set oRs = oConn.Execute("SELECT BBILNAM, BTWP, BTXP, BPARCEL, BBILADD, BBILCTYST, BBILZIP5 FROM TESTdb WHERE BTWP = 'TWP' AND BPARCEL = 'PARCEL'")
SQL Fields in Table TESTdb are (BTWP = numeric field) and (BPARCEL = text field)
I realize that the problem is that I'm comparing a numeric field in my table, to a text field from my form, but don't know how to convert the text field to a numeric field, prior to the execution of the select statement. I'm hoping someone can point me in the right direction. Thanks!
Code: USE [byrndb] GO /****** Object: StoredProcedure [dbo].[sp_GetLikeJobsByJobNumber] Script Date: 08/28/2012 15:17:28 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON
[Code] ....
Why when I run
Code: USE [byrndb] GO DECLARE@return_value int EXEC@return_value = [dbo].[sp_GetLikeJobsByJobNumber] @number = N'23913' SELECT'Return Value' = @return_value GO
Am I getting an "Msg 8114, Level 16, State 5, Procedure sp_GetLikeJobsByJobNumber, Line 16
Error converting data type varchar to numeric." error? Line 16 is "@number varchar = null"
I have a column "Cost" (data type=varchar) and another column "Qty" (data type=int)
Now in outer query, I need to multiply this 2 columns Cost*Qty.But after trying some cast operation still getting "Error converting data type varchar to numeric."
I have the following code and i want to passed more than one value:
DECLARE @myvendedor AS varchar(255) SET @myvendedor = '87,30' print @myvendedor SELECT top 10 ECOM.COM1,* from ecom (nolock) WHERE ecom.PORVEND=1 AND ECOM.VENDEDOR IN (@myvendedor) Table Field ECOM.VENDEDOR is Numeric(4,0)
This error occur:
87,30 --Result of PRINT
Msg 8114, Level 16, State 5, Line 6 Error converting data type varchar to numeric.
I change :
DECLARE @myvendedor AS numeric(4,0)
and this error appear:
Msg 8114, Level 16, State 5, Line 2 Error converting data type varchar to numeric.
OK, so I have this query where I'm trying to subtract values like this, when I do this I am getting (Arithmetic overflow error converting varchar to data type numeric.) I have tried many different things, and now of these work, it'll either return 0 because it loses the .XXXXX.
Convert(DECIMAL(10,7),CAST([TIME_OF_COMPLETION] as DECIMAL(10,7)) - Convert(DECIMAL(10,7),CAST([OPR_DELIVERED_TIME] as DECIMAL(10,7)) round(cast(cast(hist.[TIME_OF_COMPLETION] AS float) as DECIMAL(15, 5)) - CAST(hist.[OPR_DELIVERED_TIME] AS FLOAT),1 SELECT convert(FLOAT,CAST('735509.00053' AS DECIMAL(10,5))) - convert(FLOAT,CAST('735509.00047' AS DECIMAL(10,5)))
I'm moving data from one database to another (INSERT INTO ... SELECT ... FROM ....) and am encountering this error:
Msg 8114, Level 16, State 5, Line 6 Error converting data type varchar to numeric.
My problem is that Line 6 is:
set @brn_pk = '0D4BDE66347C440F'
so that is obviously not the problem and my query has almost 200 columns. I can go through one by one and compare what column is int in my destination table and what is varchar in my source tables, but that could take quite a while. How I can work out what column is causing the problem?
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine. CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red ELSE '3' --White END END else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
when I run below query I got Error of Arithmetic overflow error converting numeric to data type numeric declare @a numeric(16,4)
set @a=99362600999900.0000
The 99362600999900 value before numeric is 14 and variable that i declared is of 16 length. Then why this error is coming ? When I set Length 18 then error removed.
I'm getting the above when trying to populate a variable. The values in question are : @N = 21 @SumXY = -1303765191530058.2251000000 @SumXSumY = -5338556963168643.7875000000
When I run, SELECT (@N * @SumXY) - (@SumXSumY * @SumXSumY) in QA I get the result OK which is -28500190448996439680147097583285.072256 ie 32 places to left of decimal and 6 to the right When I try the following ie to populate a variable with that value I get the error - SELECT R2Top = (@N * @SumXY) - (@SumXSumY * @SumXSumY)@R2Top is NUMERIC (38, 10)
DB is SQL 2000 and I'm trying to convert a field datatype from varchar to numeric where the data is hours:minutes:seconds (05:52:12), but I run into errors with EM and scripts that the db cannot convert those datatypes. I've tried the cast function with same results ... any solutions?? I need to run SUM(), AVG(), etc, against the data and can't with VARCHAR type. Thanks all -Greg
I am using MS SQL Server 2008R2 along with VB 2010.The first question is: why is it even trying to convert anything to numeric? I have NO numeric data types. And I don't have any nvarchar data types either. I'm very confused.Doesn't nchar include any and all characters, in any combination? Should I change everything to text data type? Maybe something else? Some values are going to be blank. The Lab/Source Lots have numbers, letters and dashes.
can anyone see as to why I would get this error with the following SP? ALTER PROCEDURE [dbo].[SP] @ID int = 0, @emailFrom VARCHAR(50) = Null, @emailDate VARCHAR(50) = Null, @emailSubj VARCHAR(50) = Null, @emailTxtBody VARCHAR(1000) = Null, @emailHtmlBody VARCHAR(1000) = Null
AS -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON;
DECLARE @Notes VARCHAR (8000) DECLARE @TicketID INT DECLARE @emailBody VARCHAR (1000) DECLARE @Length Int
SET @Notes = '' SET @Length = LEN(@emailSubj)
-- insert a new entry INSERT INTO PopEmail ( emailFrom, emailDate, emailSubj, emailTxtBody, emailHtmlBody ) VALUES ( @emailFrom, @emailDate, @emailSubj, @emailTxtBody, @emailHtmlBody ) -- get the new ID SET @ID = @@identity
If ( @ID <> 0 ) AND ( ISNUMERIC(@emailSubj) = 1 )
Begin IF @emailTxtBody IS NULL BEGIN Set @emailBody = @emailHtmlBody PRINT '@emailHtmlBody: ' + @emailBody END
ELSE
BEGIN SET @emailBody = @emailTxtBody PRINT '@emailTxtBody: ' + @emailBody END
SET @TicketID = CAST( @emailSubj AS int ) SET @Notes = @emailFrom + ', ' + @emailDate + ', ' + @emailBody Select @ID = ID From TicketDetails Where TicketDetails.TicketID = @TicketID
Exec differentSP @ID, @TicketID, @Notes
PRINT 'Subject: [' + @emailSubj + ']' print 'length: ' + CAST(@Length as varchar (10)) Print 'emailSubj: ' + CAST( @emailSubj AS int ) PRINT 'ID: ' + Cast( @ID as varchar ( 10 ) ) PRINT 'TicketID: ' + Cast( @TicketID AS Varchar ( 10 ) ) PRINT 'Notes: ' + @Notes PRINT 'ID: ' + Cast( @ID as varchar ( 10 ) ) END ELSE
BEGIN Print 'ID: ' + CAST(@ID AS VarChar(10)) PRINT 'ISNUMERIC: ' + CAST(ISNUMERIC(@emailSubj) AS VarChar (10)) PRINT 'Subject: [' + @emailSubj + ']' END
I have a table with a column (locationID) of int data type, I want to pass a list of locationID's to a stored procedure using the IN operator (e.g. WHERE LocationID IN (list of locationID's)). What can I do to achieve this????
My stored procedure looks like this:
CREATE PROCEDURE [sp_test] @sLocIDs varchar(30) AS select count(distinct TimeZoneID) As timezones, from dimLocation WHERE LocationID IN (@sLocIDs)
When I test it: exec sp_test @sLocIDs = '1,2,10' I get "Error converting data type varchar to int"
Hi, It is not exactly what I stated in the subject - It's an outcome - exception thrown while executing non-query command. I get this exception when I try to execute my stored procedure that takes datetime as one of its parameters. I am using dataset designer to create table adapters and build queries. Then I simply use objectdatasource component that uses one of the table adapters and bind it to for example a detailsview control. When I run this in debug mode and trace the objects everything looks perfect including these datetime parameters. It is sql server that throws the exception. I ran the sql profiler to see what exactly is going on, and I captured the command that is sent by ADO - it's broken into several lines right in the middle of my datetime parameters... this is the source of the problem. Everything is working fine when I take this command and execute it as a single line in the sql management studio. Is there anything about ADO that I do not know?
I have the following query which has been giving me headaches for days : SELECT SCCode [Service Catalog Code], FileName [File Name], FullName [Full Name], FileExtension [Extension], FileSize [Size], Author [Author], CONVERT(VARCHAR(50),CAST(LastModified AS SMALLDATETIME), 120) [Last Modified], CONVERT(VARCHAR(50),CAST(LastAccessed AS SMALLDATETIME), 120) [Last Accessed], TimesAccessed [Downloads], UploadedBy [Uploaded By], CONVERT(VARCHAR(50),CAST(UploadedAt AS SMALLDATETIME), 120) [Uploaded At] FROM #TempTable WHERE id > @firstitem AND id < @lastitem ORDER BY CASE WHEN @sortcolumn = 'Service Catalog Code' THEN SCCode WHEN @sortcolumn = 'File Name' THEN FileName WHEN @sortcolumn = 'Extension' THEN FileExtension WHEN @sortcolumn = 'Size' THEN FileSize WHEN @sortcolumn = 'Author' THEN Author WHEN @sortcolumn = 'Last Modified' THEN CONVERT(VARCHAR(50),CAST(LastModified AS SMALLDATETIME), 120) WHEN @sortcolumn = 'Last Accessed' THEN CONVERT(VARCHAR(50),CAST(LastAccessed AS SMALLDATETIME), 120) WHEN @sortcolumn = 'Downloads' THEN TimesAccessed WHEN @sortcolumn = 'Uploaded By' THEN UploadedBy WHEN @sortcolumn = 'Uploaded At' THEN CONVERT(VARCHAR(50),CAST(UploadedAt AS SMALLDATETIME), 120) END ASCWhen my @sortcolumn parameter is either FileSize (BIGINT) or TimesAccessed (BIGINT) then the query returns the data without any problem. However, if I use a different @sortcolumn value such as "Author" then I keep getting "Error converting data type varchar to bigint."A solution that seems to work is to drop CASE and use lots of IF statements instead. I don't prefer to do this because it requires me to repeat the same select statement for each and every possible @sortcolumn value!Does anyone know how to solve this? Help!
