I'm working with SQL Server Reporting Services (SQL Server 2005)
I tried to configure a Data-Driven Subscription but the run failed with the error:
Done: 1 processed of 1 total; 1 errors.
I cannot find anything into the error log ReportServerService__<datetime>.log located at <Program Files>Microsoft SQL ServerMSSQL.#Reporting ServicesLogFiles.
How can I find useful information about the error message?
I have  data driven subscriptions which are working fine for some subscription and one i have newly developed which is used to send the missing punch report to employeesNow , when the subscription runs it shows that all have gone email in report server but some of they are not getting any email i have tested it on my id to send each ones report to me but i also get sometimes 2 of 15 , 4 of 15 or else but not all i also checked mailroot folder under my server's inetpub there are nothing stucks. How to check why is it not sending email to all employees ?
View 3 Replies View RelatedDoes anyone know how I can determine the number of page writes that have been performed during a set period of time? I need to figure out the data churn in that time period.
TIA
Very new to SQL and trying to get this query to run. I need to sum the total trips and total values as separate columns by day to insert them into another table.....
My code is as follows;
Insert Into [dbo].[CombinedTripTotalsDaily]
(
Year,
Month,
Week,
DayNo,
Day,
Trip_Date,
[Code] .....
I haven't a clue how to accomplish this.All the data is in one table. The data is stored by registration dateand includes county and number of students brokne out by grade.Any help appreciated!Rob
View 4 Replies View RelatedFor some reason my Add Total is grey out, when i tried to add grand total using some expression.
I have two row & two column groups?
Is there any alternative or how can i enable add total? using expression..as you can see in my Attached Image
I'm using iff condition in my expression..Â
I have a table that writes daily sales each night but it adds the day's sales to the cumulative total for the month. I need to pull the difference of todays cumulative total less yesterdays. So when my total for today is 30,000 and yesterday's is 28,800, my sales for today would be 1,200. I want to write this to a new field but I just can't seen to get the net sales for the day. Here is some sample data. For daily sales for 6-24 I want to see 2,000, for 6-25 3,000, 6-26 3,500, and 6-27 3,500. I'm thinking a case when but can't seem to get it right.
CREATE TABLE sales
(date_created date,
sales decimal (19,2))
INSERT INTO sales (date_created, sales)
VALUES ('6-23-15', '20000.00'),
('6-24-15', '22000.00'),
('6-25-15', '25000.00'),
('6-26-15', '28500.00'),
('6-27-15', '32000.00')
My table contains 1000 records,
I need to know the total record count with the below paging query
SELECT EmpName,Place
FROM EmplyeeDetails ORDER BY Place
OFFSET 10 ROWS FETCH NEXT 10 ROWS ONLY;
How to get?
Hi, can anyone help?
I have created a Report using Visual studio-the report displays a subreport within it.
On the Subjective Report I have 12 values for each month of the year.
For the first month the value is =sum(Fields! Month_1.Value), and I
have named this text box €™SubRepM1€™
The name of the subreport is €˜subreport1'.
On my Main Report, again I have 12 values for each month of the year.
For the first month the value is =sum(Fields! Month_1.Value)*-1, and I
have named this text box 'MainRepM1'
The name of the main report is 'GMSHA Budget Adjustment Differentials'
The report displays both of the subreport and main report values
but I now need to total these values together for each month in order to
produce a grand total.
I have tried using the following to add the totals for Month 1 together,
=subreport1.Report.SubRepM1 + MainRepM1
but this does not work and I get the following error message €˜The value expression for the text box 'textbox18'contains an error [BC30451] Name subreport1 is not declared'.
I feel that it should be a simple matter of adding the two sets of values together but I€™m having major problems trying to get these totals to work.
Can anyone help, thanks
Hi ppl
I have a confusing situation that I CAN resolve with cursors, BUT cursors are far too performance hungry to be run.
Tables: LogFileIn, LogFileOut,
I want to look on LogFileIn FLI for files that has a NULL LogFileOut(response to LFI) AND dont have any other value.
A file can have multiple LFO's depending on how many times that file gets processed.
It is confusing but bear with me.
Code:
select * from LogFileIn where IdentityFileChar = 'BPRTFILE'
and responseLogFileOutId is null
This does pull out a list of files that havent been processed, BUT that same file might have been processed again and succeeded. Therefore the results I get arent accurate.
With the cursor I would have taken the filename from the LFI and used that to check if that filename comes up again in the LFO as processed.
Did you get that? And can you help?? Im confusing myself!
This table records everytime a file is run, so there might be 20 identical LFI's all with different LFO's... Im looking for LFI's that have null, and only Null.
Hello all,
I have a query that keeps getting errors from our SQL Server. Can anyone see why ?
select job.key,job.job,job.item,job.job-date
From job
where job.job-date > (dateadd (year,-1,job-date))
order by job.job, job.item, job.key
I have tried bracketing the job-date but I still get errors saying it is
unable to understand the query. Thank you for your help in advance.
what is order in which conditions are processed for sql query i.e for
select * from table1, table2 where cond1 and cond2 and cond3 which condition will be processed first (i.e. for optimination purpose condition cutting down max no. of row shud be placed first or last?)
Hi,
i have a report like this
Is there a way i can highlight only the first row and not other rows.
Its should look like this:
Texas
XYZ ABC Kingsville
PSD ATY city2
RTE RET city3
Is there a way i can do like this??
Hello everybody
Help me to get the last processed date of a stored procedure.
I am using http to access my cube (MS Analysis Server) and there are userswho are getting "Query could not be processed. Access is forbidden"intermittently. Can someone help out and let me know what is causing thisissue? Some users are not getting this error.
View 3 Replies View RelatedHello,
when is seemd that everything works some weird behaviours comes out.
I try to summarize the problem without to post the complete code.
Service Broker is set to have a dialog between two databases on the same SQL Server instance.
The Initiator queue has retention=on and there is an activation SP to handle errors and Target's end dialog message.
The Target queue has retention=off, MAX_READER =1 and there is an activation SP to receive the message (WAIT FOR (RECEIVE (1) ...), TIMEOUT 30000 and do something with this message (sample insert into a DB).
The conversation has a Timeout Dialog to end the dialog after a while.
The problem that the message is constantly processed. The Process doens't stop is I end the dialof after the processing either.
n.b.the Receive is within a Transation that I commit at the end.
some other informations that in the meanwhile I found out :
This was my complete WAIT FOR(RECEIVE :
WAITFOR ( RECEIVE top(1) -- just handle one message at a time
@message_type=message_type_id, --the type of message received
@messagetypename=message_type_name,
@message_body=message_body, -- the message contents
@dialog = conversation_handle -- the identifier of the dialog this message was received on
FROM [TargetQueue]
), timeout 1000;
if (@@ROWCOUNT = 0)
BEGIN
COMMIT;
BREAK;
END
IF I delet TIMEOUT 1000, everything works as expected ...
Inside if (@@ROWCOUNT = 0)BEGIN..END I wrote also an Insert into a table to see wheter the end of the queue was reached but this insert never occurs (neither with not without timeout)
I'm happy that it works what if this is the solution, it make no sense to me!
Any ideas?
Thank you!
M.B.
Thank you very much
M.B.
Hi All,
I have a scenerio where i need to run the scheduled package for every 10 minutes. Let me give some examples. Say once my ETL process is done, my SS_Batch table gets inserted once. Here i have two columns like SS_Batch_cd and SS_Create_TS respectively. Once the ETL process runs successfully this SS_Batch_CD column will have values as 'C' which means 'Completed'. Similarly when ETL process fails this SS_Batch_CD column will have values as 'F' which means 'Failed'. And Similary when ETL process is in progress this SS_Batch_CD column will have values as 'P' which means it is in 'Progress'. In SS_Create_TS column, it will have date like 2008-04-15'.
Note : This SS_Batch table will get inserted only once when ETL job is over (whether the job is runned sucessfully or not or in Progress) along with the date.
Actually i need to run the package for every 10 minutes because i dont know when the last cube was processed. If i get this last processed cube date then i can check this processed cube date with SS_Create_TS column and SS_Batch_cd in SS_Batch table. Say if Last processed cube date is greater than SS_Create_TS then i can refresh or process the cube. This validation i need to do to achieve my goal.
What are all the control flows should we need to have in SSIS to achieve this scenerio? Please give me briefly to solve this problem.
Please advise on this.
Thanks in advance.
Anand Rajagopal.
I've got a stored procedure that processes a TON of records...
What I would liek to do is to write a row to a "progress" table which shows how many rows have actually been processed.
I have a simple counter defined in the procedure:
SET @COUNTER = 0
Each time the procedure loops through, it increments by 1:
SET @COUNTER = @COUNTER + 1
What I would like to do is write rows to a PROCESS table which would reads:
PROCESSED 1000 rows
PROCESSED 2000 rows
PROCESSED ...... rows
etc.
I have a slight idea how to pull this off, but not sure about the whole even number thing by 1000.
If anyone has any insight it would be greatly appreciated!!
Thanks in advance!
We've just patched our Dev server, and, of our 3 servers (Dev, Test, Prod), we see major changes in the output of a raw data import process that runs nightly. Each night we import tables from a Remedy helpdesk system running on Oracle and place each ticket into a row on a table, tracking the changes and history of the ticket, etc. This includes tracking when supervisor groups are changed during the course of a ticket (ie Helpdesk to Data Comms to Billing etc). Now, after SP1, the results on Dev are skewed with partial strings showing in the From and To fields, broken in odd places (like the middle of words).
Has anyone noticed any changes in which post-SP1 SQL Server 2005 processes strings? Does it automatically trim spaces or convert NULLs etc?
The data import should be identical between Dev and the other servers.
Anyone has a "one sql statement" to get the total spaceused and totalspace allocated of an instance ? ie same as sum of relevance fieldsfrom sp_spaceused for each database in an instance, that works accrossversion of mssql from 6 onward.ThanksKD
View 1 Replies View RelatedHi All,
I have some clarifications on stopping my package once cube is refreshed or processed.
Below i have given steps for the transformation in my package
Let me give you what are all the dataflow transformations that i had given in my package.
1. Data Flow Task
2. Script Task 1- I have written code for getting the last processed cube (global variable has been declared for Last processed cube date - lastProcessedCube)
3. Script Task 2 - I have written code for SS_Batch table where i can get Create_Ts date that is assigned to another global variable - create_ts.
4. Analysis Processing Task.
In between Script Task 2 and Analysis Processing Task i have given @lastProcessedCube > @create_ts for Expression and Constraint under Precedence Constraint Editor
Actually i need to run package for every 10 minutes which i can do it in Job Schedule and need to refresh or process the cube daily. Is there any way to stop the package once when my cube is processed on that day. Again start the package for the next day.... Is it possible to do this? Please let me know.
Thanks in Advance,
Anand Rajagopal
I have moved some DB's from a physical server to a virtual server while the physical server is being upgraded. This morning when I checked to make sure all the jobs are running fine I saw that a backup job failed for one of the databases. The error was :
[color=#ff0000]Executed as user: NT AUTHORITYSYSTEM. BACKUP 'database 1' detected an error on page (1:1400911) in file 'D:Datadatabase 1.mdf'. [SQLSTATE 42000] (Error 3043) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.[/color]
Then I ran a DBCC check db command and found the following errors:
Msg 8928, Level 16, State 1, Line 1
Msg 8939, Level 16, State 98, Line 1
Msg 8976, Level 16, State 1, Line 1
Msg 8978, Level 16, State 1, Line 1
Msg 8939, Level 16, State 98, Line 1
Msg 8978, Level 16, State 1, Line 1
The messages varies from data from one page cannot be referenced on another, data page cannot be processed, page was not seen in the scan although the parent was etc etc.
Hi;I have been writing a lot of quick and diryt tsql scripts to correctdatabase issues.I've been saving the output of the scripts for future records.I have been executing them through query analyzer.I find the messages query analyzer puts out to be obscuring to myoutput: ie" 6 rows processed "Is there anyway to shut this off?Steve
View 3 Replies View Related
I have created a cube with Analysis Service 2005. I then publish the pivot table (generated in Microsoft Excel 2003) as a web page. When I view the web page on the domain the LAN everything is working properly. But when the web page I view on Internet I get the error.
The query could not be processed:
* An error was encounted in the transport layer
* The peer prematurely closed the connection.
The web page is publish on the Internet Information Server, I changed the security directory of the website, but the error persists.
The firewall of the machine is disabled.
The port 2382 and 2883 are allowed.
The components needed to consult the cube are installed in the machine on which you are viewing the cube.
On the Rol of Analysis Service are allowed all users.
What other type of restriction may be?
Thanks...!!!
What's the best way to write key values of records processed in my SSIS 2012 package to the log provider chosen?My SSIS package deactivates widgets as well as thingies. Â It was just released into production this week, runs daily, and we'd like to keep a close eye on what it's doing for a couple of weeks, by that I mean on any day be able to quickly see which thingies and widgets were deactivated that morning. Â It typically deactivates less than 5 widgets and thingies per day. Â
We could dig through the database to see which were deactivated, but that only works if somebody hasn't manually reactivated it since it was deactivated. Â We need a log. Â This is a temporary watch we're doing, so we don't want to write to a table or make make any significant package changes, such as adding new tasks.It seems like writing the 5-or-so deactivated thingy and widget key values to the log is the best way to watch this package. Â What's the most efficient way to do this? Â I'm hoping to avoid a new loop and script component with "Dts.Log" calls, but I don't know any other way.
I can pull a last processed date for the entire model: URL...That works great for showing the last time anything in the entire model was processed. It is not table specific. Updating / processing table A also changes the timestamp on tables B and C.However, if I want to look at just a specific table in the model (build a column for each fact table and a measure to go with it) I find that doing any process operation updates all the =Now() columns in all the fact tables.If I have a model with 3 fact tables and I do a process table using ProcessFull on one of them, all three tables calculated columns "LastProcessed"  =NOW() are updated. URL...
Type>ProcessFull</Type>
 <
Object>
   <
DatabaseID>MyModel</DatabaseID>
   <
DimensionID>TableA</DimensionID>
 </
[code]...
Is there a way to setup a measure in the model on a per table level to show last processed date for each individual table? LastDataRefresh:= MAX ('TableA'[LastProcessed])
For example: Our sales table may update three times a day, where as our warehouse inventory table is only updated nightly.I wanted to let end users see by adding a measure for each table when the last process event was for a given table in the model.
I have an Integration services application that retrieves big strings (over 32k) from an ODBC data source and stores them in a SQL server 2005 database as ntext.
Somehow the strings are truncated to 32K. The app only copies the data from the ODBC datasource to the (OLEDB) target.
Also, some of the special characters in the input text are not properly translated.
Any ideas?
When i process a order in table Orders_t i would like to check in storage_t if we defenetly have it in storage. .... if we have it in storage, i decrease the "amount" by 1 ..(amount -1), and process the order. Otherwise it will return nothing.
This is what i´ve come up with so far:
CREATE TRIGGER checkInStorage
ON orders_t
FOR INSERT, UPDATE
AS
DECLARE
@tOrderId char(3),
BEGIN
SET @tOrderId = (SELECT orderId FROM INSERTED)
--check if the amount in storage
IF EXIST(SELECT amount FROM storage_t WHERE orderId = @tOrderId and amount >= 0)
BEGIN --if it return true, i update the storage by decrease the amount with one
UPDATE storage_t
SET (amount = amount - 1)
WHERE orderId = @tOrderId
END
this doesn´t work...
I have a main report and 2 sub reports. I would like to pass the total Premium Paid from 2nd Sub report , and Total Bonus received from 3rd Sub report back to main report.
My scenario is actualy much more complicated than what i had attached below, which i cannot join the query for the 3 different reports together. But for demo purpose, i created the following sample scenario.
My main report is to display the sales summary by person by location.
A person may have more than 1 account number, and each account number is entitly for bonuses. As illustrated below.
I'm looking at SSIS and SqlBulkCopy as a possible method to quickly insert and process large amounts of data, my current method uses the sp_xml_preparedocument and OPENXML to parse an xml document of the data I want to process and insert into the database, however I'm noticing the performance of SqlServer parsing the xml document isn't that good.
I found the C# SqlBulkCopy method (new in .NET 2.0) and I was thinking it would be faster to use that to load my data into a staging table and then use SSIS to extract the data from the staging table, process and transform it as necessary and finally load it into the final destination tables. I was able to create an Integration Services Project that selects the data from the staging table, does a bit of processing on one of the fields (by calling a stored procedure), and finally loads the processed data into the final table.
The problem with this is I need to clean out the rows that were extracted from the staging table and I'm not sure how I can accomplish this (and I can't just issue a "delete from staging_table" because there maybe new records in the staging table that were not processed), perhaps I can either delete each record as it is proccessed or somehow get the last proccessed identity id from the staging table and delete all records less than or equal to that id.
thanks in advance for any help you can provide, maybe there is an easy way to accomplish what I'm trying to do.
-Matt Palmerlee
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Thanks,
Lee
how to trigger report's refresh following its underlying SSAS cubes process?
I want to keep reports data updated at all times, especially when this happens while user is already browsing the report..
I don't want to set an auto refresh for the report every 5 minutes as my cube is processed only one time during the day...