Does anyone have a link to a good tutorial on how to create a drill down report in SSRS 2000. I found one for SSRS 2005
http://www.c-sharpcorner.com/UploadFile/MohanKumar.R/DrillDownReport02212008083910AM/DrillDownReport.aspx
If I had the AdventureWorks Db I may be able to figure it out.
I know how to create a hyperlink but I need the toggle (+/-) for my latest endeavor.
My book "Hitchhikers Guide..." didn't help me out.
Thanks.
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level**  and        **Salesamount**. Â
Values are like Â
**[-]category** Â Â Â Â Â Â Â **100**
  **[-]subcat**       **50**
     **product**      **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
I need to create a SSRS report using the Warehouse tfs_warehouse DBÂ Report need to be drill down on WorkItemType Parents and child values. So, If we click on Product Back Log Item will get all the tasks inside it and so on....
------->Product BackLog items
             ----------> Bugs Or Tasks
                        -----------> Tasks
I have done research and found out how to do it in OLAP cube ..but still can't figure out the TSQL query to be used.Found one of the query on forum:
SELECT * FROM DimWorkItem DWI
INNER JOIN FactWorkItemLinkHistory FWILH ON DWI.System_Id = FWILH.TargetWorkItemID
WHERE FWILH.WorkItemLinkTypeSK IN (SELECT DWILT.WorkItemLinkTypeSK FROM DimWorkItemLinkType DWILT WHERE DWILT.LinkName = N'Child')
AND DWI.System_WorkItemType = N'Task'
AND DWI.System_Rev = (SELECT MAX(DWI1.System_Rev) FROM DimWorkItem DWI1 WHERE DWI1.System_Id = DWI.System_Id)
AND FWILH.SourceWorkItemID IN (SELECT DWI2.System_Id FROM DimWorkItem DWI2 WHERE DWI2.System_WorkItemType = N'Bug');
I'm new to the SSRS reports, I have a Drill Down report in that I had Customer data and its related Accounts are populating while expanding the (+) Customer now I need to add hyperlink to the associated Accounts .. How to achieve this.
View 3 Replies View Relatedhy all,
when i export to excel reports having a drill-down, in the excel file i don't have the possibility to drill down data.
i have memory that once it was possible.
does anyone know how to help me?
is it possible that a service pack or any updating could have change configurations?
thanks
by
nicola
I am having difficulty in exporting a report to Excel that has drill-down grouping created in SSRS 2008 R2. I can export with the report expanded or with just the summary and both look fine, but when it gets to Excel it looses the toggle ability which I need for it to retain.
View 2 Replies View RelatedI have created a word cloud in SSRS 2008 using Jason Thomas's method but I would like to be able to add an action to click on a word to go to a another report using either the word or an ID integer. how to add an action to go to another report?
View 5 Replies View RelatedI replied to an thread in the pre-2010 forum before I realized the forum I was in...
I'm using Visual Studio 2008 to Design my SSRS reports. The report viewer is using SharePoint 2010 SP1 integrated mode.
I am using a conditional statement to determine which report to drill to based on the SSRS textbox's column.
=iif((Fields!Type.Value =
"Total")OR
(Fields!Type.Value ="Variance - (F)/U"),"DivisionSpendingReport","DivisionSpendingReportDetail")
Works fine in Visual Studio. Once deployed to SharePoint though, the drill through returns an error that says report can't be found. So I added the .rdl to the conditional statement in the report Design.
=iif((Fields!Type.Value =
"Total")OR
(Fields!Type.Value ="Variance - (F)/U"),"DivisionSpendingReport.rdl","DivisionSpendingReportDetail.rdl")
It now works in SharePoint but not in Visual Studio...
Do I need to keep adding and removing the ".rdl" in order to make any changes to this report???!!!
I have a drill down report which need to be exported to excel. But, when exporting to excel it shows many unwanted blank rows for a particular record due to the drill down option.
Is it possible to remove it?
I need to exclude the rows in yellow color when exporting to excel.
I want to create reports in SSRS that use cube in SQL 2000, I don't know which type of connection that i have to use,
I tested it with Microsoft SQL Analysis Services, means I connect to my cube with this type , everything is ok in developpement (create MDX query , make reports...), but in production It gives me this error message (cannot connect to the datasource),
so I don't know how to solve this problem,
Thanks in advance for your help...,
Regards
windows 2003 SP2 with AD, IIS with SSL, SQL 2000 SP4, RS SP2.
I am trying to deploy a report from visual studio .net 2003. Error message: not able to connect to https://servername/reportserver
I can access the reporting website on IE https://webserver/reportserver, and I can up load reports with site interface, but can't use designer 2003 to deploy.
any suggestions?
Thanks,
Jaime B.
Good day,
I have a SSRS 2000 report that when I view the report data does not refresh until I press the refresh data button in the report. Clearly this can't be right and to expect users to press the refresh button every single time is also rediculous.
HAs anyone had this problem before and know what to do.
Please help.
Thanks
I am working in SSRS 2000, and I have a report using a table. In the footer of the table I want to do a calcuation. I have a textbox in the table called "SumAmtCurrent", which is a sum value for a field in my dataset. I have another field in my dataset, "TotalRevCurrent", and I would like to take this second field, subtract the value in the textbox "SumAmtCurrent", and have the result in the footer of the table. I tried to reference the textbox using ReportItems!SumAmtCurrent.Value - but that gives me the following error
"...The value expression for the textbox €˜textbox7€™ refers to the report item €˜SumAmtCurrent€™. Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope..."
Is there a way I can get this total into my report?
Thanks in advance!
I have a report builder drill down report. I have row groups with totals.   It looks like the attached.  The problem is when the report is not expanded the Grand Totals column is not accurate... it is displaying the totals of one of the rows when expanded.The expression in the Total Show text box is
= Switch ( Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
MID(Fields!protocol_id.Value,1,7)="THERAPY", Â Â Â Â Â Â Â Â Â Â
                     Sum(IIF(Fields!status.Value = "CO", CDbl(Fields!TX_CO.Value),      Nothing)),
 MID(Fields!protocol_id.Value,1,7) = "GENERAL" and                          MID(Fields!program_id.Value,1,6)
= "INTAKE", Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Sum(IIF(Fields!status.Value = "CO",
[code]...
Is there any way to not display the expression in the Total columns unless the report is expanded?
Hi,
we have a requirement that, when we click on the multiple series bars in a SSRS chart, it should drill through that chart and the detail report should filter based on these x axis and y axis of the bars selected.
As far as my knowledge, we can drill through the chart by selecting single series bar at a time in SSRS. Is there any way to acheive this multiple drill through of a chart.
Thanks
Raghava
HI,
i would like to know whether you can control access to a drill down in a report in ssrs.
thanks for your help in advance.
thank you
Kanthi
Hi All,
I want to know How to make Drill Through Reports in SSRS ?
Please Suggest.
Ritesh Kumar
Hi,
I've created dsv that contain all fields from table database. in the smdl I've remove some fileds due to security. All fields in the smdl do not contain drill.
Issue: When I created calculated field in the report builder the field has a link. When I clicked the drill I saw all the record data including field that not in the smdl.
Questions:
1) Can I remove the link from the calculated fields?
2) Can I prevent from users drill to fields that not in the smdl?
Thanks,
Assaf
Hello:
Here is the scenario: I have a report in SSRS 2005 that uses an OLE DB connection to send a MDX query to an AS 2000 cube. The report has been working fine for weeks. When the report ran today, it returned the row and column metadata, but not the cell values.
I ran the MDX query separately in the SSRS query editor pane, and it returns all values properly. I was also able to perform the query using ProClarity, so it appears that the issue is between the result set and SSRS.
What would cause this to happen?
Thanks for your help!
Tim
I deployed the same report model to 2 different SSRS servers. The report only has 1 field with count of records from 1 table. I can drill down on this column on 1 server, but not on the other server. This column is set to drillabe on the report model.
Is there any SSRS configuration that is stopping me drilling down on it?
I have a requirement where i am converting a Crystal report into SSRS.
My data contains different groups where some of the sections should be suppressed based on Drill down group level.In crystal they are using DrillDownGroupLevel <> 1 .
SQL server 20005 SP2 is install in my WIN XP machine. I implement a SSRS report and try to deliver the report to a share folder in window 2000 server.
I create and set permissions on a shared folder as per the information in http://msdn2.microsoft.com/en-us/library/ms345228.aspx. The account that I use in subscription is local admin account in the target machine.
I have try path \<servername>c$XXX and \<servername>XXX. Both is not ok.
I find following error message in the log file of reporting service.
ReportingServicesService!library!d!04/29/2008-00:03:40:: e ERROR: Throwing Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider+NetworkErrorException: A logon error occurred when attempting to access the file share. The user account or password is not valid., A logon error occurred when attempting to access the file share. The user account or password is not valid.;
Info: Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider+NetworkErrorException: A logon error occurred when attempting to access the file share. The user account or password is not valid. ---> System.Runtime.InteropServices.COMException (0x8007052E): Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at RSRemoteRpcClient.RemoteLogon.GetRemoteImpToken(String pRPCEndpointName, Int32 type, Guid dataSourceId, String pUserName, String pDomain, String pPassword)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.GetImpersonationToken(String userName, String domain, String userPwd)
--- End of inner exception stack trace ---
If I try to deliver same report to a share folder in WIN XP in the same way. It is ok.
I have integrated my SSRS Drill though report in Web page and i could not able to find back button to go back to the original report. Unfortunately, i am not controlling the report viewer tool bar.Do we need to write some code to get it working.
View 2 Replies View RelatedI thought the built in expression Level() would show me be drill down level. I can't see to get that to work. I'd like to determine my drill down level so I can hide columns based on that.
View 2 Replies View RelatedHi All,
I have one dotnet applciation in that i am viewing the report in report viewer. In the same report if the user clicks on one field another report will open. I got a problem with this second report. the image placed on the second report is not coming and if the user clicks on the print button which is on the report viewer the first report is only getting printed. How can I print the second report.
Thanks In Advance
Hi all
I am new in Sql Server reporting services ..So please help me to clarify my doubt
Please help me to know whether it is possible to generate a drill down report using Report sevices. If it possible please let me know how it can be generated
For Example
Measures
Quarter1 Quarter2 Quarter3#
Profit Profit Profit
====================================================================================
Dimension
Product1 200.50 1500.75 -200.40
Product2 5000.00 4000.00 6000.00
==================================================================================
In the above example Quarter 3 for product 1 shows los in such cases I want to drill down the transaction to get the detailed inormation and to find out the reason how the loss came..
Please help me to get such type of drill down is possible in measures to get the detailed report
With regards
Polachan
Hi All,
I have a table which has a country, division, category, product, Valuetype, value
data looks like this:
Country division, category, product, Valuetype, value
---------------------------------------------------------------------
UK Division1 Food Pizza Volume 10000
UK Division1 Food Pizza Revenue 2000
UK Division1 Food Pizza ROI 4.5
UK Division2 Food Pizza Volume 14000
UK Division2 Food Pizza Revenue 2400
UK Division2 Food Pizza ROI 4.1
UK Division2 Drinks Cola Volume 14000
UK Division2 Drinks Cola Revenue 2400
UK Division2 Drinks Cola ROI 4.1
I want to build a drill-through report to be grouped on country, division, category and product.
Can someone help me with some suggestions?
Cheers
Josh
1)i have drill through report..
a is the parent report..
b is the child/subreport ..
after i click link at parent report -(a), it will go to the child/sub report -(b),
but when i want back to parent report,dont have button back...
for your infromation,it will hapened when i deploy to server and use report viewer control from data tab in visual studio..
2)when i click the button print at child report(b) , but it will print the parent report, not the child report..
any setting for this problem?
thanks for reply..
thanks in advance...
is it possible to have drill down feature in matrix report?
A B C
x 1 0 1
y 2 2 2
z 4 0 7
What would be nice is if the user clicked on "7" and a report opened showing the detail for that value.
I'm building my report using the Report Designer in the SQL Server Business Intelligence Development Studio. At the moment I've got a single report which consists of 2 tables. The top table shows some summary data and the bottom table shows more detail.
What I'd like to do is design the report so that when the summary data (in the top table) appears, the user can click on a row in the table and this takes them to a new screen which shows more detail about that item, extracted from the bottom table.
Is this possible? I know it's possible to create a drill-through report if you have the high-level summary data in one report and the low-level detailed data in a separate report, but is it possible to create a drill-through report if all the data is in one single report (albeit in 2 separate tables)?
Hello All,
I am sure many people faced this problem before. I want to drill-through to a report in another project. I want to use "Jump to report" in the navigation tab.
I am able to use Jump to URL. But I cound not specify "method="post" target="_self" in the "Jump to URL" box.
Can some one help me on how to use:
1. "Jump to Report" for reports in another project.
2. Or. Help me specify method="post" target="_self"
Regards
Bobba
Hi,
I want to create the report with following requirements.
I want to have the following fields in the drill down
India
Sales report
Expense report
Analysis report
USA
Sales report
Expense report
Analysis Report
UK
....
If I am clicking any country, it should show the sub report. If I click the sub report, it should show the appropriate report. please help me. thanks in advance
Hello,
I have a main report that drills-through to a secondary report. The main report has parameters which can be selected (Dairy, Frozen, Fruits, etc.). If I make a selection (let's say Fruits) the second report displays just Fruits information (as would be expected).
However, when I select 'All' from the parameter, on the Main report, and then click to drill-through, the passed parameter is the first selection below 'All.' I cannot seem to pass 'All' to the second report.
What am I doing wrong?
Thank you for the help.
-Gumbatman
p.s. The datasets are based on an Analysis Services cube.