Drill Down In A Matrix Report
Jan 8, 2007is it possible to have drill down feature in matrix report?
A B C
x 1 0 1
y 2 2 2
z 4 0 7
What would be nice is if the user clicked on "7" and a report opened showing the detail for that value.
is it possible to have drill down feature in matrix report?
A B C
x 1 0 1
y 2 2 2
z 4 0 7
What would be nice is if the user clicked on "7" and a report opened showing the detail for that value.
Hi All,
I have a table which has a country, division, category, product, Valuetype, value
data looks like this:
Country division, category, product, Valuetype, value
---------------------------------------------------------------------
UK Division1 Food Pizza Volume 10000
UK Division1 Food Pizza Revenue 2000
UK Division1 Food Pizza ROI 4.5
UK Division2 Food Pizza Volume 14000
UK Division2 Food Pizza Revenue 2400
UK Division2 Food Pizza ROI 4.1
UK Division2 Drinks Cola Volume 14000
UK Division2 Drinks Cola Revenue 2400
UK Division2 Drinks Cola ROI 4.1
I want to build a drill-through report to be grouped on country, division, category and product.
Can someone help me with some suggestions?
Cheers
Josh
I have defined the following to generate a matrix report
1. Row data: Country,region,state,Race,gender
(Red colored columns - Group1;
Blue colored columns - Group 2)
2. Column Data: Statistics as of (Date)
3. Value: household income
I'd like to be able to have a seperate drilldowns on group1 and group2. i.e drilling down on country, region, state shouldn't automatically expand/minimize race and gender. I played with the attributes of individual columns and edit groups of the same. But couldn't achive an independent drill down.
Income as of '05 Income as of '06
Country Region State Race Gender 100k 105k
Having independent drilldown on the group1 and 2 enables us to find out, for example, how many hispanics live in the region west coast. (in a typical tree like drill down, you need to expand country, region and state to get to Race)
How can create an independent drilldown on group1 and group2?
i'm trying to create a drill down matrix in report designer because the Chat System, i've a char in the upper region of the RDL and i want to put in the lower region a Matrix with drill down capabilities, but i don't know how to do it.
need help please
thx
Hugo
So here goes the explnation. The problem is specifying an all parameter in a drill through on the value cell of a matrix for the columns in the matrix that are not expanded.
Here goes the example
Matrix for sales.
Region | Shop | Number of sales. And then financial period would be at the top. Everything is collapsed on load so it looks something like this.
Region1 | | 50
Region2 | | 75
Then you expand Region.
Region1 | Shop1 | 30
Region1 | Shop2 | 20
Region2| | 75
At this point if you click on the 30 for shop 1 is drills through into another report passing parameter Region1, shop1 and financial period. This is perfect. The problem comes in that if you haven't expanded region1 and you click on the 50 it drills into the other report but passes through Shop1 as the shop parameter. How can I get this to pass though an all option for the unexpanded columns in the matrix. This is ofcourse just an example and my matrix has quite a few more column and stuff.
Please guys, any help would be appreciated.
This is Reporting services 2005 linking to SSAS2005 cube.
Thanks in advance
Hello Experts,
I have a Matrix in my report where on each each cell i have a drill down to another report. The Matrix also has SubTotal Column getting generated.
But the Problem is the drill down report gets carried on the SubTotal column also and the user gets vage results as proper information is not passed to another report.
Is there a way through which if its a subTotal cell then i can hide the drill down. some IIF() condition is there is
I appreciate if somebody can help me address this problem.
/Soni
I have a report builder drill down report. I have row groups with totals.   It looks like the attached.  The problem is when the report is not expanded the Grand Totals column is not accurate... it is displaying the totals of one of the rows when expanded.The expression in the Total Show text box is
= Switch ( Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
MID(Fields!protocol_id.Value,1,7)="THERAPY", Â Â Â Â Â Â Â Â Â Â
                     Sum(IIF(Fields!status.Value = "CO", CDbl(Fields!TX_CO.Value),      Nothing)),
 MID(Fields!protocol_id.Value,1,7) = "GENERAL" and                          MID(Fields!program_id.Value,1,6)
= "INTAKE", Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Sum(IIF(Fields!status.Value = "CO",
[code]...
Is there any way to not display the expression in the Total columns unless the report is expanded?
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level**  and        **Salesamount**. Â
Values are like Â
**[-]category** Â Â Â Â Â Â Â **100**
  **[-]subcat**       **50**
     **product**      **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
I need to create a SSRS report using the Warehouse tfs_warehouse DBÂ Report need to be drill down on WorkItemType Parents and child values. So, If we click on Product Back Log Item will get all the tasks inside it and so on....
------->Product BackLog items
             ----------> Bugs Or Tasks
                        -----------> Tasks
I have done research and found out how to do it in OLAP cube ..but still can't figure out the TSQL query to be used.Found one of the query on forum:
SELECT * FROM DimWorkItem DWI
INNER JOIN FactWorkItemLinkHistory FWILH ON DWI.System_Id = FWILH.TargetWorkItemID
WHERE FWILH.WorkItemLinkTypeSK IN (SELECT DWILT.WorkItemLinkTypeSK FROM DimWorkItemLinkType DWILT WHERE DWILT.LinkName = N'Child')
AND DWI.System_WorkItemType = N'Task'
AND DWI.System_Rev = (SELECT MAX(DWI1.System_Rev) FROM DimWorkItem DWI1 WHERE DWI1.System_Id = DWI.System_Id)
AND FWILH.SourceWorkItemID IN (SELECT DWI2.System_Id FROM DimWorkItem DWI2 WHERE DWI2.System_WorkItemType = N'Bug');
Hi,
I've created dsv that contain all fields from table database. in the smdl I've remove some fileds due to security. All fields in the smdl do not contain drill.
Issue: When I created calculated field in the report builder the field has a link. When I clicked the drill I saw all the record data including field that not in the smdl.
Questions:
1) Can I remove the link from the calculated fields?
2) Can I prevent from users drill to fields that not in the smdl?
Thanks,
Assaf
I deployed the same report model to 2 different SSRS servers. The report only has 1 field with count of records from 1 table. I can drill down on this column on 1 server, but not on the other server. This column is set to drillabe on the report model.
Is there any SSRS configuration that is stopping me drilling down on it?
Hi All,
I have one dotnet applciation in that i am viewing the report in report viewer. In the same report if the user clicks on one field another report will open. I got a problem with this second report. the image placed on the second report is not coming and if the user clicks on the print button which is on the report viewer the first report is only getting printed. How can I print the second report.
Thanks In Advance
Hi all
I am new in Sql Server reporting services ..So please help me to clarify my doubt
Please help me to know whether it is possible to generate a drill down report using Report sevices. If it possible please let me know how it can be generated
For Example
Measures
Quarter1 Quarter2 Quarter3#
Profit Profit Profit
====================================================================================
Dimension
Product1 200.50 1500.75 -200.40
Product2 5000.00 4000.00 6000.00
==================================================================================
In the above example Quarter 3 for product 1 shows los in such cases I want to drill down the transaction to get the detailed inormation and to find out the reason how the loss came..
Please help me to get such type of drill down is possible in measures to get the detailed report
With regards
Polachan
1)i have drill through report..
a is the parent report..
b is the child/subreport ..
after i click link at parent report -(a), it will go to the child/sub report -(b),
but when i want back to parent report,dont have button back...
for your infromation,it will hapened when i deploy to server and use report viewer control from data tab in visual studio..
2)when i click the button print at child report(b) , but it will print the parent report, not the child report..
any setting for this problem?
thanks for reply..
thanks in advance...
I'm building my report using the Report Designer in the SQL Server Business Intelligence Development Studio. At the moment I've got a single report which consists of 2 tables. The top table shows some summary data and the bottom table shows more detail.
What I'd like to do is design the report so that when the summary data (in the top table) appears, the user can click on a row in the table and this takes them to a new screen which shows more detail about that item, extracted from the bottom table.
Is this possible? I know it's possible to create a drill-through report if you have the high-level summary data in one report and the low-level detailed data in a separate report, but is it possible to create a drill-through report if all the data is in one single report (albeit in 2 separate tables)?
Hello All,
I am sure many people faced this problem before. I want to drill-through to a report in another project. I want to use "Jump to report" in the navigation tab.
I am able to use Jump to URL. But I cound not specify "method="post" target="_self" in the "Jump to URL" box.
Can some one help me on how to use:
1. "Jump to Report" for reports in another project.
2. Or. Help me specify method="post" target="_self"
Regards
Bobba
Hi,
I want to create the report with following requirements.
I want to have the following fields in the drill down
India
Sales report
Expense report
Analysis report
USA
Sales report
Expense report
Analysis Report
UK
....
If I am clicking any country, it should show the sub report. If I click the sub report, it should show the appropriate report. please help me. thanks in advance
Does anyone have a link to a good tutorial on how to create a drill down report in SSRS 2000. I found one for SSRS 2005
http://www.c-sharpcorner.com/UploadFile/MohanKumar.R/DrillDownReport02212008083910AM/DrillDownReport.aspx
If I had the AdventureWorks Db I may be able to figure it out.
I know how to create a hyperlink but I need the toggle (+/-) for my latest endeavor.
My book "Hitchhikers Guide..." didn't help me out.
Thanks.
Hello,
I have a main report that drills-through to a secondary report. The main report has parameters which can be selected (Dairy, Frozen, Fruits, etc.). If I make a selection (let's say Fruits) the second report displays just Fruits information (as would be expected).
However, when I select 'All' from the parameter, on the Main report, and then click to drill-through, the passed parameter is the first selection below 'All.' I cannot seem to pass 'All' to the second report.
What am I doing wrong?
Thank you for the help.
-Gumbatman
p.s. The datasets are based on an Analysis Services cube.
Hi all,
I was wondering whether there was a way to implement a "Hide all/show all" option in the report. are there any examples that I could refer to ?
Thanks !
Bernard
Hi all,
We are developing some reports in Reporting Services 2005 (deployed in Sharepoint). We are having a bit of a problem with the drill down functionality:
When drilling, the report page "jumps", repositioning itself so that the item I drilled is at the top of the page. Not what I wanted, I want it to expand the item without repositioning it.
So, any ideas on what my problem is? I am in kind of a hurry to fix this problem (as always ...).
Regards,
Daniel
I am having an issue with a drill through report. I have a parent report with 12 parameters that drills through to a report with a single parameter. The parent reports runs fine and the drill through works fine.
The problem occurs when I hit the browser back button to return to the parent report. The parent report will start to refresh (I see activity in the status bar) but then I just get an endless 'Report is being generated' message. If the report refresh button is hit then the report will come up (I would expect this to happen). I can't expect the users to have to continually
hit the report refresh button when returning to the parent report.
The report and drill through works fine in Visual Studio and this probelm is only apparent when testing through IE7.
Anyone have any ideas about this? Out of curiosity is there a limit to how many parameters can be used in a report? I can't find any reference to this in any SSRS literature.
Thanks
Ray
I have a report with a matrix object within which I can "drill-down" through several row and column groups. The report runs, and I can successfully "drill-down" within the matrix object.
However, when I create a drill-through action that executes another report when users click on the summed number of the matrix object, the main report fails with an out of memory error. When I remove the drill-through action, the report runs successfully again. This report is important because the users need to use it to get the detailed records from the main report.
Why is this happening? Does adding the drill-through links really use up that much memory?
Is there anything I can do to correct this problem, besides play with server memory settings and/or upgrade to 64 bit? I have already passed as much of the aggregation as I can to the database; in fact, the query for the main report only pulls 1000 records!
I refuse to create an intermediary drill-through report, since the whole reason I created the first drill-through report was because the main report can't handle the detail in the first place.
Thanks.
I have created a drill down report, using text boxes. When the report is not drilled down, all root nodes are collapsed, the spacing is really weird between them. For
example.
+ Node A
+ Node B
<a bunch of white space>
+ NodeC.
I want all the nodes to be one after each other. Thanks for any help you can provide.
Can we do this?
Adding more columns in a matrix report that don€™t
belong to the columns drilldown dimensions€¦
That is, for example, having the following report:
Product Family
Product
Country City Number of units sold
Then I
would add some ratios, that is, Units Sold/Months (sold per month) and other that
is the average for Product Family (Units Sold/Number of Product Family), for putting an example€¦ some
columns should be precalculated prior to the report so do not get into it, the
real problem I don€™t see how to solve is adding one or two columns for showing
these calculated column that doesn€™t depend on the column groups but they do
for the rows groups€¦
Any guidance
on that?
The only
way I am seeing by now is to set it as two different reports, and that is not
what my client wants€¦
Many
thanks,
Jose
Hi all;
Could any body tell me as to how I would be able to pass report grouping in drill through report.
Please review the diagram below to better understand my problem
Report 1 (Summary) Columns1 Column 2
Row-1:Grouped by attribute X Calculation based of dates Calculation based of dates
Row-2: Grouped by attribute Y Calculation based of dates Calculation based of dates
The Drill thru option should be present in all of the columns; so that, when any of the numbers in the column are clicked it should drill through to another report which should show all the records pertaining to all the values in X1
Report 2 (Details) Report 3 ((Details)
X1 Y1
X2 Y2
X3 -
X4 -
X5 -
- Yn
-
-
-
Xn
What I did so far was to pass the report parmeter in report 1 as "Fields! attribute X ,Value" and same for Y
The problem with is that only the first value of the group that satisfies condition gets passed on to the detail reports. Kindly let me know were I am going wrong and what should I be doing.
Awaiting your opinions
Thanks and Regards
GM
I have a matrix report with STORES in the row group and DATES in the column group. The table sums on SALES. The DATES column is formatted like =format(Fields!DATES.Value, "MMM yyyy"). The table also has 2 parameters @Start and @End. This all works great but I then added a child report so that the user can click on the SALES value for any sale by month and store. The child report uses the @Start and @End parameters from the original report but this is where I run into problems.
Rather than bringing me the sales details for a particular store and month it brings back everything from the time period selected with the original date parameters. So say I originally selected 2015-01-01 to 2015-06-30 with the parameters when I select on FEB 15 in my matrix report I get Febs data along with all the other months ie Jan-Jun 15. The DATES fields in both reports are in the same date format - in fact both reports use exactly the same dataset.
I realize it's something to do with the formatting of the DATE field not being recognized in the linked report.
All,
I have two reports in my project. One is summary and the other is drill through. In Summary report I have StartDate and EndDate Parameters which are DateTime type. Language settings on my workstation are set to Canadian English, and so are in the IE. When I deploy the reports to the Sharepoint WebParts based reporting portal, the reports run fine individually. However, when I try to drill through from summary report to the detail report, the following error is displayed, where the StartDate is 13/07/2007 (Canadian format dd/MM/yyyy):
The value provided for the report parameter 'StartDate' is not valid for its type. (rsReportParameterTypeMismatch)
Why do the reports run fine individually? Obviously something is wrong with Report Server processing the parameters, that it converts the date format to US English only when passing parameters to drill through report. This problem is eliminated when I change the language settings to US-English on my workstation.
Any ideas how can this be fixed, if at all? It would certainly be not feasible to have all the users change their settings from Canadian to US-English.
Thanks.
I am experiencing some issue with drill through report parameter not getting selected some times.I have two reports parent and child. Both reports have total ten parameters and all are cascading parameters with multiple selection. The report, when drill through to child, first eight parameters selected as it in the parent report.But the ninth parameter not get selected with the default value which from parent report and the parameter populated with values.
The first two parameter type is  date time and rest of them are text and all text type parameters available and default values are populated by query (Data set) only.
I'm new to the SSRS reports, I have a Drill Down report in that I had Customer data and its related Accounts are populating while expanding the (+) Customer now I need to add hyperlink to the associated Accounts .. How to achieve this.
View 3 Replies View RelatedI have a drill through report. I am passing multiple parameter values to my sub report using 'url'.
But I am getting error 'The full path must be less than 260 characters long'.
I am having difficulty in exporting a report to Excel that has drill-down grouping created in SSRS 2008 R2. I can export with the report expanded or with just the summary and both look fine, but when it gets to Excel it looses the toggle ability which I need for it to retain.
View 2 Replies View Related
Hai Iam new to SSRS 2005, please help me regarding below Drill Through Report Problem. Assum my problem with below example.Iam tried Hard iam not able to find the solution, Any body please help me.my real time problem is same as below functionality
If Suppose iam dispalying two columns like Country,Department,iam taking these two columns in a table, assume country column having America,south africa, individual america column having Florida state, south africa column contains capetown state, in the preview of the report iam applying drilldown to America column like + America, i need when clicking the America column i want to display Florida state under the column of Country like tree view structure
i need output like this and the same time i want to display other columns those also contain tree view structure assume other one is department column, with contains computers and sales, individualy computers contains HP, Sales contains Bikes
Country Department
+ America + Computers
---Florida -- HP
+ SothAfrica + Sales
---Capetown __Bikes
How to implement above output using drill through functionality, i tried with subreports and used all grouping formats, is possible for display output like above explain the procedure .
Thanks In advance
Jacks