Any body pls tell me steps to create Drill Down reports in Sql Server 2005 Reporing Services.
If possible give me one example to create Drill down Reports.
Regards.
Naren
I am using Report Builder 3.0 and i have report which has a drill down group. The report opens in a collapsed form.This report has interactive sorting on a column. But,when we drill down and sort the column, the group collapses and the details disappear.
In some posts, i have seen that instead of interactive sorting, people recommended a parameter. But i have to do interactive sorting only.
I have created stored procedure.How can i use it insted of writing Sql Statement in Report Design.
Pls Help me.
Regards.
Hi All,
Originally when I installed SSRS, I set all to default vlues.
Once I configured reporting server configurations to default values, can i change it later..I try to do that but it does not allow me to do that.
When I click new in reportserver virtual directory, it brings up the dafualt web site.
How do I change this?
Thanks
In SQL Rep Serv Config Manager under Web Service Identity, the ASp.NET Service account is disabled and if I enter the Report Server application pool into Report Server and Report Manager it brings back:
Setting Web Service Identity
There was an error setting the identity for the web service. The previosly set identity will still be used.
ReportServicesConfigUI.WMIProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 80070005
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)
Any help would be greatly appreciated.
Thanks,
Anoop
Hello,
I want to enable a drill down on a parent child hierarchy, just as it is possible in the Analysis Services.
An Example :
Hierarchy in a company : Jack (1) is the boss, Frank (2) and Andy (3) ar the Semi-Bosses , and Julia (4), Jane (5), Henry (6), Michael (7), Will (8) , Dave (9) are normal employees . Timmy(10) is a trainee. Furthermore Frank is responsible for Julia,Jane and Henry and Andy is responsible for Michael WIll and Dave. Dave is responsible for Timmy. So we get the following tree hierarchy structure.
1
2 3
4 5 6 7 8 9
10
My Employee Dimension Attributes : Name, Parent
I want to make a report, where I show the salary of each employee. But at first the user only sees 1, when he drills down he sees 2 and 3, too. When he drills down once more he sees 4 5 6 and 7 8 9, too (The user must be able to recognize which person is responsible for 456 and which for 789). And the last drill down shows 10, for which 9 is responsible ( exactly as it is possible in the analyis Service in the Cubebrowser)
I have read some posts where are MDX examples which are similar to my problem, but they did not solve my problem.
I hope somebody can help me
JF
Hi all,What is Drill Down Reports in Reporting Servies.How can i design Drill Down Reports.
Give me any example to desing Drill Down Reports.
Regards.
Any way to have the drill through report open in a new window on the web?
View 4 Replies View Related
Hi all
is it possible make drill down reports in crystal
my requirement is like
i have n rows in my report
if am clicking the first column in first row it will list details of that row in between first and second row
Same for all the rows
Quick reply is appreciated
Regards
Rameez
Hi All,
Am new to Reporting Services. I need to create some drill down reports. Am unable to find any guidance or tutorials. Anyone please help me to create drill down reports
Thanks in advance
Regards
Nataraj.C
Hi all,
Am new to SQL Server Reporting services. I need to create some Drill down reports. Am unable to find any guidance or tutorials for that. Please help me to create variety of drill down reports.
Thanks in advance.
Regards
Nataraj.C
How do I drill through to a report from a report that's in a different directory? In the designer I can only drill through to reports that are in that project. I'm sure that there is a simple solution (hopefully!).
View 1 Replies View RelatedI've been able to insert a graph in my reports which automatically allow drill down (into the graph). This has stopped working on new reports and I can't see why, or how to allow drill down (in graphs) again. Anyone help? I'm using Crystal Developer Ver9.2. Thanks
View 1 Replies View RelatedHi,
I always have this exception:
w3wp!library!1!02/28/2007-13:50:11:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.StreamNotFoundException: The stream cannot be found. The stream identifier that is provided to an operation cannot be located in the report server database., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.StreamNotFoundException: The stream cannot be found. The stream identifier that is provided to an operation cannot be located in the report server database.
When i try to drill in a report that have images.
The weird is that i only have this error when i view this report in ReportViewer in a .aspx page. When i try to enter in this report directly by using the ReportServer ( http://server/Reports ) i dont have this error.
what is wrong ?
cya
Hi All,
I want to know How to make Drill Through Reports in SSRS ?
Please Suggest.
Ritesh Kumar
Hello,
In the sharepoint site from the main report when i go to my drill down report i see no back button, Is there a way to provide back button in the toolbar. I dont want to use the page back button. or is there any way by which if i click for my drill down report the report will be opened in a new window?
Thanks & Regds,
Hi, all experts here,
Thank you for your kind attention.
I am wondering if we can drill down reports in a different page with different layouts and columns? e.g. I have too many columns desired to see in a report, so I want to direct the users to another page with different layouts and columns, so the first view in the report wont display so many columns in a page. Is it possible to make it in SQL Server 2005 Reporting Services? And if it is possible then how? Hope my question is clear for your help.
Thanks a lot in advance and I am looking forward to hearing from you.
With best regards,
Yours sincerely,
Hi all.
Any body give me one example,how to create drill Through reports in Reporting Services.
Regards.
Report A contains a textbox that should navigate to Report B using the Jump To option. Report A and Report B are located in separated folders on the Reporting Server.
SSRS looks for the rdl file within the same folder when using the Jump To option. Is there away to navigate to a report located in a different folder on the same server?
Thanks
Hello,
I have a drill down report and would like to add interactive sort on two columns:- column 1 & column 2. These two columns should be in descending order. By adding this, when user's click on column 1 they will see the data based on the sorted order.
Does anyone help me on this issue.
Thanks,
BL
Hi there,
I'm using the reportviewer control to display a drill-through serverreport. Here is the code in my code-behind file:
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
Dim strReportPath As String = "/Public Reports/adfront/dealermodel/myreportname"
Dim paramUniqueID As New ReportParameter()
If Not Page.IsPostBack And Me.ReportViewer1.ServerReport.IsDrillthroughReport = False Then
Session("uniqueid") = Request.QueryString("uniqueid").ToString
'Set the report server URL and report path
Me.ReportViewer1.ServerReport.ReportServerUrl = New Uri("http://localhost/reportserver")
Me.ReportViewer1.ServerReport.ReportPath = strReportPath
Me.ReportViewer1.SizeToReportContent = True
Me.ReportViewer1.AsyncRendering = False
Me.ReportViewer1.ShowBackButton = True
Me.ReportViewer1.ShowFindControls = False
Me.ReportViewer1.ShowPageNavigationControls = False
Me.ReportViewer1.ShowParameterPrompts = False
Me.ReportViewer1.ShowPromptAreaButton = False
Me.ReportViewer1.ShowZoomControl = True
Me.ReportViewer1.ZoomMode = ZoomMode.FullPage
'Set the processing mode for the ReportViewer to Remote
Me.ReportViewer1.ProcessingMode = ProcessingMode.Remote
'Set the report parameters for the report
paramUniqueID.Name = "uniqueid"
paramUniqueID.Values.Add(Session("uniqueid"))
Dim parameters() As ReportParameter = {paramUniqueID}
Me.ReportViewer1.ServerReport.SetParameters(parameters)
End If
Me.ReportViewer1.ServerReport.Refresh()
End Sub
Protected Sub ReportViewer1_Drillthrough(ByVal sender As Object, ByVal e As Microsoft.Reporting.WebForms.DrillthroughEventArgs) Handles ReportViewer1.Drillthrough
While (Me.ReportViewer1.ServerReport.IsDrillthroughReport)
Me.ReportViewer1.PerformBack()
End While
'Me.ReportViewer1.ServerReport.ReportPath = e.ReportPath
'Me.ReportViewer1.ServerReport.GetParameters()
Me.Label1.Text = Me.ReportViewer1.ServerReport.ReportPath
End Sub
When I drill-through the report and hit the (browser) back button and try to drill-trough again I get the following error:
The path of the item "(null)" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply. (rsInvalidItemPath)
When I hit back again and try to export the report to eg. PDF, I get this error:
Execution 'mly2yj555oen0o45oowe1e55' cannot be found
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: Execution 'mly2yj555oen0o45oowe1e55' cannot be found
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Exception: Execution 'mly2yj555oen0o45oowe1e55' cannot be found]
Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) +553
Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) +941
Microsoft.Reporting.WebForms.ServerReport.Render(String format, String deviceInfo, NameValueCollection urlAccessParameters, String& mimeType, String& fileNameExtension) +97
Microsoft.Reporting.WebForms.ServerReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileExtension) +126
Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +153
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +202
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +154
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
It looks like my executionid is lost on the reportserver. Does anybody knows how to fix this, so my users can use the browser back button?
Many thanx!
Ralph
Hi all,
Drill through bar charts work great in the report designer preview, but as soon as I deploy the report, and view the report in a webpage, drill through does not work smoothly.
I have to move the mouse around to be able to find a place on the bar to click through to the next report. Sometimes, I am able to click on the bar to go to next report, but then sometimes I have to click on the label, and other times somewhere in the vicinity of the label.
Any help will be much appreciated.
Thanks,
Kanwal
Hello - I am having difficulty enabling the automatic click-through functionality for my model. I have two entities - Customer & Incident. Incident is a role/FK/OptionalMany relationship to customer.
I've read through earlier postings on this subject (below) and have verified that the #Incidents attribute in my incident entity has the EnableDrillThrough=true.
My test report is simple - Customer Name (from customer) and #Incidents (from incident). When I run it, the click-through option is not available (the cursor stays as an arrow and doesn't change to a finger).
Are there other properties or settings that I need to be working with? I have SP2 (9.0.3042) installed on our Standard edition of SQL 2005. I know Infinite Click-Through is not in Std edition, but a few levels should be, correct?
Thanks in Advance,
Toni
Other related postings -
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1260819&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=657279&SiteID=1
Can someone please let me know how to achieve Report Bursting property in SQL Server 2005 Reporting Services ?
View 3 Replies View RelatedHello,
I would like to know if Reporting Services 2005 is a good tool for making reporting activities on SQL Server 2005 DW and also using OLAP (Analysis Services 2005).
There are any limitations or bugs to using it.
This is good for trends.
Thank, any help will very appreciated.
Hi All
I would like to implement the functionality offered by SQL Server 2005 Reporting Services that
exports the report to PDF, but I want to do it in my C# 2005 application.
Can I do this? How?
Please help.
khuzwayom
I tried to deploy reports from VS 2005 on Dev to Prod (different domain, in WSS integration mode) , but VS keeps showing the login window ...
I set up TargetDataSourceFolder, TargetReportFolder and TargetServerURL in VS 2005 on my Dev machine as mentioned in MSDN article "Deploying Reports, Models, and Shared Data Sources to a SharePoint Site" and tried to deploy reports to Prod machine. But VS 2005 keeps showing "Report Services Login" window to me, even when I used Administrator account of that Prod machine.
The WSS log file on the Prod machine shows this error: "The file you are attempting to save or retrieve has been blocked from this Web site by the server administrators."
Any ideas?
Thanks in advance! I have searched for days for this issue ...
Hello,
I've seen this question floating around, but I have not been able to find a definitive answer.
Can this be done, and if so, what do I need to install into Visual Studio 2003?
Thank you.
-Gumbatman
Hello SQL Server Experts, Data Analysts, and Report Writers et al:
re: Reporting Options with SQL Server
I wanted to propose an offshoot to the pryor thread:
Would anyone take a stab at comparing Access Reports, Crystal Reports,
Cognos or other options to all the Reporting Services and its components offered as part ofSQL Server, especially as to extracting data from SQL Server into a report format?
I guess this is a far as capabilites, ease of use, limitations, and especially formatting
or presentation of the end report product?
Thank you to all, and I hope this is a beneficial discussion to others.
Hal1490
Hal9000
I have the following requirement I need to extract all records for min or max date between the 1 and 10th of every month, the following query works but I find some dates that are not in the range specified.
Select
[EventType],ItemName,FORMAT([TimeLastModified],'MM')asFromMonthValue,
FORMAT([TimeLastModified],'MM')asToMonthValue,
FORMAT([TimeLastModified],'MMM')asFromMonthLabel,
FORMAT([TimeLastModified],'MMM')asToMonthLabel,
min([TimeLastModified])asMinDate,max([TimeLastModified])asMaxDate,ModifiedBy,Casewhen[EventLog].EventType=1
Then
'Item Added'
[Code] .....
When someone drills down in a report how can i change the categories that they can see?
View 4 Replies View RelatedHi,
I have cube created, When I use the drill through option for some cells I get the the following message
'Unable to drill through. The operation requested failed due to timeout'
I tried setting connection timeout in the advanced tab of data Link properties to max(at the moment set to 15 seconds), But could not save that. The Analysis manager does not respond.
Any help please.
Thanks
John Jayaseelan
I am experiencing some issue with drill through report parameter not getting selected some times.I have two reports parent and child. Both reports have total ten parameters and all are cascading parameters with multiple selection. The report, when drill through to child, first eight parameters selected as it in the parent report.But the ninth parameter not get selected with the default value which from parent report and the parameter populated with values.
The first two parameter type is date time and rest of them are text and all text type parameters available and default values are populated by query (Data set) only.