I need to drop and recreate few subscriptions in transactional publication
Do I need to worry about log marker issues ?
Do I need to set the primary and replicate databases in 'DBO use only'
The Primary and Replicate databases are being accessed all the time.
Can anyone help with how to recreate a pull subscription replication job after I had to recreate the msdb database when it was marked as suspect. I still have the subscription but cannot seem to recreate a pull replication job
View 1 Replies View RelatedI have come across a user that has error 2525 errors on sysobjects tables throughout their SQL 6.5 system. The ids match and I can identify the index. But as they are system tables I cannot drop or rebuild the indexes.
Any ideas please?
The errors have been occuring for some time, so it is not an option to restore. I would like to avoid having to transfer data to and from another SQL Server.
Many Thanks
I'm having a heck of a time trying to upload data to an excel spreadsheet. This works perfectly in sql 2000 but I've been having problems with 2005
SSIS package "Package1.dtsx" starting.
Error: 0xC002F210 at Drop table(s) SQL Task, Execute SQL Task: Executing the query "drop table `GRE`
" failed with the following error: "Table 'xxx' does not exist.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Drop table(s) SQL Task
Error: 0xC002F210 at Preparation SQL Task, Execute SQL Task: Executing the query "CREATE TABLE `xxx` (
`TEST_REC_NBR` Decimal(29,0),
`PROCESS_DT_GRE` LongText
)
" failed with the following error: "Invalid precision for decimal data type.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Preparation SQL Task
SSIS package "Package1.dtsx" finished: Failure.
hi,
how can i drop views and recreate again?
thinks ...
Hello,
I need to retrieve all the information about all the foreign key constraints,inorder to store them temporarily (to be deleted later)and then recreated after making the necessary modifications to the concerned tables.
The stored proc sp_helpconstraint shows all the constraint types, their user-defined or system-supplied name, the columns on which they have been defined, and the expression that defines them.But I don't know whether it can be manipulated to get what I want.I need to get it done programmatically..so that I can integrate it in my program which I'm building up progressively.
Any help or scripts would be appreciated!
I have found an (encrypted) SP which takes ~20 seconds to run on one of our client DBs.
If I drop and recreate (or alter) the SP giving it the same contents it will run in ~1 second.
I need to know
1. why the sp started running so slowly
2. how to stop it happening again
3. how to fix it without resorting to drop/recreate (I can't exactly write a batch script to recreate all our sps every so often)
I have tried sp_updatestats and sp_recompile before running the sp to no avail...
anyone heard of a problem like this before?
cheers
H
Hello,
I have two tables Person & Location where Location has a primary key LocationId and Person has a foreign key LocationId.
Sometime ago I used the Database Diagrams visual tool of SQL Server Management Studio Express to create the foreign key relationship between the two tables - i.e. "visually" (drawing a line between the PK & FK LocationId elements of both tables).
Time has passed and I recently noticed that, upon retrieving my saved diagram, the foreign key relationship had "fallen off" (i.e. the many-to-one line was no longer showing in the diagram).
After recreating the relationship (redrawing the line) I find that I get an error message when I try to save the diagram:
Post-Save Notifications
[!] Errors were encountered during the save process. Some database objects were not saved.
'Location' table saved successfully
'Person' table
- Unable to create relationship 'FK_Person_Location'.
The ALTER TABLE statement conflicted with the FOREIGN KEY constraint "FK_Person_Location". The conflict occurred in database "mydb", table "dbo.Location", column 'LocationId'.
When I go back to the object explorer and view the dependencies for the two tables, there is no dependency (between these two tables) revealed. When I try to create the foreign key constraint manually (T-SQL) it again says can't add the constraint. It comes up with an error as follows:
ALTER TABLE Person
ADD FOREIGN KEY (LocationId) REFERENCES Location (LocationId)
Msg 547, Level 16, State 0, Line 2
The ALTER TABLE statement conflicted with the FOREIGN KEY constraint "FK__Person__LocationId__793DFFAF". The conflict occurred in database "mydb", table "dbo.Location", column 'LocationId'.
(Note: Each time I do this, the 8 hexadecimal character suffix changes.)
When I try to drop the foreign key:
alter table Person
drop constraint FK__Person__LocationId
it comes back with the error:
Msg 3728, Level 16, State 1, Line 2
'FK__Person__LocationId' is not a constraint.
Msg 3727, Level 16, State 0, Line 2
Could not drop constraint. See previous errors.
So it seems that there's some kind of goof up here. Can anybody shed light on this / tell me how to fix it?
is there anyone know how to drop subscription from the publisher database without a connection to the subscriber(because the subscriber server is formated)
View 3 Replies View RelatedThere is a push subscription to an immediate-updating transactional publication with a queued failover. The publisher was also the distributor.
The publisher melted down and has been removed from service. The subscriber continues to queue up transactions for the now nonexistent publisher.
How do you remove the push subscription directly from the subscribing machine?
Thanks for your help,
Jim Schweitzer
Anobi Technology
I have a program running on Pocket PCs that synchronizes with a desktop SQL database using SQL Mobile. My problem is that I can't delete old subscriptions from the publication; now the publication has 25 subscriptions and won't accept any more (limit of SQL Workgroup edition). I can delete non-SQL Mobile subcriptions just fine.
Running sp_replmonitorhelpsubscription provides this information:
subscriber: LVCONTACTSMERGE - 5FA305234F0C
subscriber_db: Program FilesPocketLVContactsLVContacts.sdf
publisher_db: LVContacts
publication: LVContactsMerge
So I set up this bit of code:
USE LVContacts
EXEC sp_dropmergesubscription
@publication = 'LVContactsMerge',
@subscriber = 'LVCONTACTSMERGE - 5FA305234F0C',
@subscriber_db = 'Program FilesPocketLVContactsLVContacts.sdf',
@subscription_type='all';
GO
No errors are reported, but the subscription doesn't get deleted.
I've tried shutting down SQL Server Agent (mentioned in another thread); makes no difference.
Any ideas?
--Evan
Hi,I found this SQL in the news group to drop indexs in a table. I need ascript that will drop all indexes in all user tables of a givendatabase:DECLARE @indexName NVARCHAR(128)DECLARE @dropIndexSql NVARCHAR(4000)DECLARE tableIndexes CURSOR FORSELECT name FROM sysindexesWHERE id = OBJECT_ID(N'F_BI_Registration_Tracking_Summary')AND indid 0AND indid < 255AND INDEXPROPERTY(id, name, 'IsStatistics') = 0OPEN tableIndexesFETCH NEXT FROM tableIndexes INTO @indexNameWHILE @@fetch_status = 0BEGINSET @dropIndexSql = N' DROP INDEXF_BI_Registration_Tracking_Summary.' + @indexNameEXEC sp_executesql @dropIndexSqlFETCH NEXT FROM tableIndexes INTO @indexNameENDCLOSE tableIndexesDEALLOCATE tableIndexesTIARob
View 2 Replies View Related
It seems to me that if a scheduled SSRS report subscription fails ( Status Message - An error has occurred during report processing) , that I actually need to delete the subscription and reconfigure it from scratch. The scheduled job doesn't try to run again automatically (say the next Monday on a weekly Monday schedule).
Is there a way to "reset" a failed subscription without have to recreate the entire subscription?
Thank you
Devon Kyle
28638
SSCE_M_DUPLICATETABLE
Existing subscription already contains table included in the new subscription.
What are the possible causes of this merge replication error?
Could it be caused by a SQL Server Compact Edition User trying to sync their .sdf file after their subscription has already expired on the SQL Server?
Would you expect to see a different message if a SQL Server Compact Edition user tried to sync a subscriber database (.sdf file) with merge replication if it's been longer than the subscription retention period since their last sync?
I need a stored procedure that can drop and recreate any table in a DB.
How could I find out all information pertinent to a table and able to generate the create statement dynamically in the preocedure then drop it and recreate the table.
Thank you and please help.
I want to drop table and then recreate. It's referenced by many table and I dont want to drop all constraints referencing to it. Is there any feature like "switch off/on constraints" in MSSQL?(6.5)
View 1 Replies View RelatedDoes anyone know how to recreate a database from a log file? Here is the situation:
I had a server go bad. The drive configuration was as follows
Server OS on separate RAID controller - RAID Level 1
SQL Data on separate RAID controller - RAID Level 5
Transaction Logs on Separate Raid Controller - RAID Level 1
I lost the RAID 5 array and can't get it back and don't have a backup. I need to know if/how I can recreate the database from the log file. The log file has been set to grow and has never been purged so I am hoping that I can recreate the database from scratch. Is this possible?
Dear All,
after searching continuously for removing the suspect mode of MSDB database, i've found a great article in net.but i dont understand how to proceed. please explain me the steps....
1.Detach the damaged msdb. You can't just detach msdb because you're not allowed to detach system databases. However, you can if you start the server with trace flag 3608. I did this by shutting down the server, navigating to the directory 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn' and doing the following: start sqlservr.exe -c -T3608
2.Move or rename the damaged msdb files (msdbdata.mdf and msdblog.ldf in the 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData' directory)
3.Run the instmsdb.sql script in the 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLInstall' directory
4.Shutdown and restart the server without the 3608 trace flag
Vinod
Even you learn 1%, Learn it with 100% confidence.
I want to create a clean copy of my DB now that it is done. So it can be moved to another Server. It has some sample data in some tables that I would like to keep and some in other table that I don't. How can I do this?
View 1 Replies View RelatedHi!
I have lost the repl_publisher login.
Is it possible to recreate it in any way?
What about the password?
Thanks
Håkan
Due to a server move of our SQL databases something 'strange' happend: one of the login accounts disappeared.
When I try to recreate it, SQL gives me back an error stating the account already exists. Read something about loginaccounts becoming orphaned but don't know how to solve it. The login account is a Windows (AD) account and not a SQL account (both requiring different methods of fixing?). How can I recreate just this single account?
Any help would be greatly appreciated!!!
P.
Hello
I am trying to recreate a MySQL database on a new domain. The original database was exported into about 40 .SQL text files. I am importing these .SQL text files into a new database using phpmyadmin. When I attempt to import the first of these files, I get a "fatal error". It says the upload time has exceeded the 300 second limit. How do I set up the server so there is no upload time limit? Or how would you approach a solution to this problem? There are about 40 of these text files and each file varies in size between 5 and 15mb. Is it possible to split individual files in half or 3 parts and import that way? Any help would be greatly appreciated. Thanks!!
Hi!I need to recreate the system tables (sysobjects, syscolumns,sysindexes, sysforeignkeys, sysconstraints, sysreferences, sysindexkeysat least) in another SQL server.You may say "Thats easy! Backup and restore the database!" and I wouldanswer "I can't, the database size is above 50GB and I just can't do itevery time I need to recreate the info".So, ¿Do you know any simple way to do these?I don't need the data on the user tables and I'll log-in always as dbo(using trusted connection), perhaps that helps.Perhaps the simplest way is to do a bcp to backup and restore the databut.... you never know what would happen. This is why I write ask youguy, probably you know much more than me.Thanks in advance
View 9 Replies View RelatedI have a slow query. It is indexed and I was wondering if there were any issues with using 'dbcc dbreindex' on each of the 12 replicas, to maybe make it run more efficiently? And is this something I could/should do nightly?
View 1 Replies View Relatedi have a used database publishing wizard to create a sql fiel of a databse i wish to transfer to server running sql server management studio express on a server 2005 ,
what do i need to do to recreate my databse from the sql file.
many thanks
A customer on SQL7 has a 40GB tempdb (which is usually 2-5GB) which has filled the drive. ShrinkDb/ShrinkFile do nothing as the db has only 2GB of free space. How can I truncate the data or blitz tempdb and create a new (2-5GB) one (Stopping the server, deleteing the .mdf, starting the server creates a new tempdb with the same size as the old one!)
View 2 Replies View RelatedHi!
What is the easiest way to recreate jobs running on one server on another server?
Thank you
Praveena
I need to remove log segment of one database from current position to another drive. The current log segment is used by two databases. This was created by mistake. Now we need to fix the problem and create another log segment for the other database. If we keep the log setment as is, we will have problems deleting one of the databases in the future.
Thanks for your help,
Ana.
I am looking for a script to recreate scheduled jobs on new SQL Servers that I build. I am hoping to find one that will pull information from the system tables for the name of the server and the names of the databases so that it does not have to be extensively modified for each new server.
View 4 Replies View RelatedI have different versions of essentially the same database on two different computers. From Computer B I need to copy one table AND its data to Computer A.
I've read several articles and have tried several things but can't figure out how to do it. Incidentally, I'm running SQL Server Express 2005 on both machines.
Robert Werner
Vancouver, BC
I need a tool that creates a script to recreate a db, including tables' data.Does it exists freeware ?thanks!
View 2 Replies View RelatedI have a database around 500 GB. right now the database have only one data file and one log, it has only one filegroup also.all the indexes and table are placed in Primary Filegroup . we are going to separate them. the planing is to move all the indexes to Secondary filegroup and all the table will be in Primary filegroup.But there will be a problem while implementing it because there are around 600 tables and each table have at least 2 non-clustered index , so is there any way to move all the index to Secondary Filegroup.
View 3 Replies View Related
Hi,
I have a table need to export to excel. 3 columns are 4000k. I can create the ssis package by using import and export wizard and it works fine. But when I try to edit the destination connection for excel, like using another excel file. In the edit window, the Name of the Excel Sheet box is empty, I click new button. It always fail. (with the 3 columns created as varchar (4000) or nvarchar(4000).
I am wondering how import and export wizard can create this table which I can't create it manually?
Thanks