Dump Transaction Didn't

Jan 14, 1999

I have a transaction log that is 80% full and will not dump. I have used the "dump transaction dbname with no_log" command. It return the usual "This command did not return data, and it did not return any rows". However, this didn't do anything. The transaction log is still full. I don't want to restart the server if I don't have to. Any ideas?

View 5 Replies


ADVERTISEMENT

Dump Transaction Log

Feb 22, 1999

Hi,

I need to dump transaction log every night. Before I do that I'd like to check those open transactions and kill the ones not part of sa or SQL server dba's activity. How can I achieve this?

Thanks in advance.

May

View 1 Replies View Related

Dump Transaction Log Difficult??

Jan 4, 2000

Hello:

I am working with an application in mssql 65.5, with sp4.

I have the database option 'truncatelog on checkpoint' set, there are no transaction log dumps taken at this time.

We plan now that y2k is over to upgrade to sp 5a. I am not not sure the new configuration
parameter 'logLRU buffers'(I don't have the sp5a readme text with me now) in our situation.

Here is our situtation with the transaction logs: The log, mostly with month-end high actvity,
fills up when long-running, high activity transactions are run.
The log gets to 100% sometimes rather quickly and sometimes near that or above 80%easily.
We check with dbcc open tran and there are no current transaction running. We expand the log just a little.

But it still shows 100@ used when we run dbcc sqlperf (logspace).

Here's the rub: when we try to dump the log, with wither or both back-to-back: dump tran abcdb
with truncate_only and then dump tran with no_log still nothing happens.

Sometimes we stop and start the mssql server and that helps but not always and sometimes when
we are really desperate we stop/start the NT server box(at off hours). Sometimes, the transaction log
reduces to nearly 0% used when we run dbcc sqlperf (logspace) and sometimes not. So we run dump tran
a couple of more times. We wait for several minutes usually to if the dump tan started and if it shows up
under EM under curent activity


This is becoming very frustrating and dangerous as well.

1) has any one had similar experiences with mssql 6.5 sp4?

2) Can anyone advise what we can do to more easily to dump the transaction log? Are we doing
any thing really wrong?

3) Would upgrading to sp 5a really help or should we just start planning upgrading to mssql 7.0?

Any suggestiosn you can furnish will be helpful. Thanks.

David Spaisman

View 1 Replies View Related

MS SQL SERVER 65. - Dump Of Transaction Log

Aug 5, 1998

is there any way to monitor the space utilisation of log space and if it crosses 60% or above, dump the transaction log, effectively....

i tried some of the things, given below.

1. script to monitor the space used of log using dbcc sqlperf(logspace) and check if crosses 60 % and dump the transaction into disk file and execute this script through a schedule task running every minute.

2. same result thro using sql server performance monitor.

View 5 Replies View Related

Using Performance Monitor To Dump Transaction Log

Jan 12, 1999

Hi, I am trying to set up an auto dump for Transaction log using performance monitor ( Log space used(%) )... Although I followed the steps, it did not work... can anyone tell me what am I doing wrong ?

1. create an error # using Server/message/New etc...
2. Defined sql exec alert : right click sql exective/manage alerts/operators..
3. Defined performance monitor using add to alert and set Alert if radio botton to over %80.and Run_Program on Alert: c:mssqlinnE 5555 /T /S servername

then I inset 2000 rows is a table I still get :

Msg 1105, Level 17, State 1
Can't allocate space for object 'publishers' in database 'test' because the 'default' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.

I thought what I did is the right thing to do, but it seems that I am doing something wrong, Please help.

Thanks

Ali

View 1 Replies View Related

Transaction Log Dump After Differential Backup

Jan 23, 2008

I am doing a differential backup every night with t-log backups every 15 mins. The differential backup occurs at 3:00a and is about 300 MB. The very next t-log backup at 3:15a is also about 300 MB instead of the usual 1 - 2 MB. Why is this and how can I avoid it? Is this just how SQL Server works? Do I have to do a full backup every night instead? Thanks in advance for your help.

- Michael

View 9 Replies View Related

Dump/Trucate Tempdb Transaction Log (28Gb)

Jul 1, 1999

I have a 28Gb temp db transaction log which I want to dump halfway through a process, I have tried;

dump tran tempdb with no_log

which seems to have little effect.

Thanks for your help.

Andy

View 1 Replies View Related

Automating Dump Transaction Log Using Performance Monitor

Feb 8, 1999

hi, Does anyone have done this before. if so, please enlight me with your experience

Ali

View 1 Replies View Related

LOG DEVICE FULL EVEN AFTER ISSUING DUMP TRANSACTION

Mar 3, 1999

I issued the following statement on my database as my log file showed 100% full.
However after running this command and also running it again after expanding the size
to almost double the value of both my database log and data devices it still shows the log as being 100% full.

DUMP TRANSACTION <database> WITH TRUNCATE_ONLY (and also used the NO_LOG option).

So can anyone tell me whats going wrong here? I should note that I am still able to enter data into the database without
any errors.

View 1 Replies View Related

HELP!I Checked The FAQ But It Didn't Help

Feb 4, 2007

So any help? I tried the stuff in the FAQ

View 3 Replies View Related

Why Identity Didn't Rollback ?

Jun 8, 2007

First latest Identity column is 5   I try to insert value to table which have Identity column by ExecuteNonQuery() method. There was some error and rollback this transaction.and then I modified code for completely saving after that I try to insert value again by running program although this transaction completely But value in identity is 7 ( It seems value 6 didn't rollback when not completely saveing )  Please advise me  How can I rollback Identity column value ?  

View 1 Replies View Related

Cluster Didn't Fail Over

Oct 14, 2007

We have Active/Passive cluster on Windows 2003. It is a 2 nodes cluster. The active server came down and the Cluster didn't failover. Then we had to manually failover. Can you help me to decipher the Cluster.log to find out why it didn't failover?

00000d08.000012a8::2007/10/12-04:04:40.847 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
00000d08.000012a8::2007/10/12-04:04:40.847 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = HYT00; native error = 0; message = [Microsoft][SQL Native Client]Query timeout expired
00000d08.000012a8::2007/10/12-04:04:40.847 ERR SQL Server <SQL Server>: [sqsrvres] OnlineThread: QP is not online.
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [CP] CppRegNotifyThread checkpointing key SoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLSERVER to id 4 due to timer
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsGetTempFileName C:DOCUME~1SVC_CL~1LOCALS~1Temp, CLS, 13522 => C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp, status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp, status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsRegSaveKey C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp, status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [CP] CpSaveData: checkpointing data id 4 to quorum node 1
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [CP] CppWriteCheckpoint checkpointing file C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp to file Q:MSCS592a048-5457-426a-a46d-996441ef01820000004.CPT
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsCreateDirectory Q:MSCS592a048-5457-426a-a46d-996441ef0182, status 183
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsOpenFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp => 3, 36cf960 status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsOpenFile Q:MSCS592a048-5457-426a-a46d-996441ef01820000004.CPT => 2, 36cf8d0 status 183
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] ReadFile 928 (regf) 32768 16384, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] WriteFile 95c (regf) 16384, status 0 (0=>0)
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] ReadFile 928 (regf) 32768 0, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsFlushBuffers 95c, status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsCloseHandle 928, status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsCloseHandle 95c, status 0
0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [CP] CppRegNotifyThread checkpointing key SoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLSERVER to id 4 due to timer
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsGetTempFileName C:DOCUME~1SVC_CL~1LOCALS~1Temp, CLS, 13523 => C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsRegSaveKey C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [CP] CpSaveData: checkpointing data id 4 to quorum node 1
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [CP] CppWriteCheckpoint checkpointing file C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp to file Q:MSCS592a048-5457-426a-a46d-996441ef01820000004.CPT
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsCreateDirectory Q:MSCS592a048-5457-426a-a46d-996441ef0182, status 183
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsOpenFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp => 3, 36cf960 status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsOpenFile Q:MSCS592a048-5457-426a-a46d-996441ef01820000004.CPT => 2, 36cf8d0 status 183
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] ReadFile 95c (regf) 32768 16384, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] WriteFile 928 (regf) 16384, status 0 (0=>0)
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] ReadFile 95c (regf) 32768 0, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsFlushBuffers 928, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsCloseHandle 95c, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsCloseHandle 928, status 0
0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [CP] CppRegNotifyThread checkpointing key SoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLSERVER to id 4 due to timer
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsGetTempFileName C:DOCUME~1SVC_CL~1LOCALS~1Temp, CLS, 13524 => C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsRegSaveKey C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [CP] CpSaveData: checkpointing data id 4 to quorum node 1
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [CP] CppWriteCheckpoint checkpointing file C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp to file Q:MSCS592a048-5457-426a-a46d-996441ef01820000004.CPT
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsCreateDirectory Q:MSCS592a048-5457-426a-a46d-996441ef0182, status 183
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsOpenFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp => 3, 36cf960 status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsOpenFile Q:MSCS592a048-5457-426a-a46d-996441ef01820000004.CPT => 2, 36cf8d0 status 183
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] ReadFile 7e0 (regf) 32768 16384, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] WriteFile 95c (regf) 16384, status 0 (0=>0)
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] ReadFile 7e0 (regf) 32768 0, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsFlushBuffers 95c, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsCloseHandle 7e0, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsCloseHandle 95c, status 0
0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp, status 0
0000077c.00000844::2007/10/12-04:09:11.323 INFO [Qfs] GetDiskFreeSpaceEx Q:MSCS, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [CP] CppRegNotifyThread checkpointing key SoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLSERVER to id 4 due to timer
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsGetTempFileName C:DOCUME~1SVC_CL~1LOCALS~1Temp, CLS, 13525 => C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsRegSaveKey C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [CP] CpSaveData: checkpointing data id 4 to quorum node 1
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [CP] CppWriteCheckpoint checkpointing file C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp to file Q:MSCS592a048-5457-426a-a46d-996441ef01820000004.CPT
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsCreateDirectory Q:MSCS592a048-5457-426a-a46d-996441ef0182, status 183
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsOpenFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp => 3, 36cf960 status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsOpenFile Q:MSCS592a048-5457-426a-a46d-996441ef01820000004.CPT => 2, 36cf8d0 status 183
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] ReadFile 928 (regf) 32768 16384, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] WriteFile 7e0 (regf) 16384, status 0 (0=>0)
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] ReadFile 928 (regf) 32768 0, (0=>0) 0 status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsFlushBuffers 7e0, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsCloseHandle 928, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsCloseHandle 7e0, status 0
0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp, status

View 5 Replies View Related

Things I Didn't Know Until Today

Jan 24, 2007

You can use a Select top @variable in sql server 2005:Thus:--'Throttle' the result set:Select Top (@MaxBatchSize)KeyID, LId, ArrivalDt, CaptureDt, Lat, LongFrom GPSDataOrder By CaptureDt DescMakes messing with Set Rowcount *so* redundant :-)

View 1 Replies View Related

Sharedenyread Didn't Work In ADO

Nov 16, 2006

hi ..

i made an application using vb6 that access the table in a sqlserver database and in the load event i write
cn.mode=adsharedenyread

and i make two copies of the application and run them both of them read the data and no deny happen !!! although both of the applications have adsharedenyread

how can i make privilage for some users to read or write ?
by the way is that can be done in ado.net 2.0 ?

thanks in advance.

View 9 Replies View Related

SQLXML4 Didn't Install For SQLExpress

Apr 4, 2006

After installing the March SQLExpress Advanced package, I noticed that SQLXML4 did not install. 
 
Is there a way to install the proper version separately, or do I just need to reinstall the entire package?
 
Thanks,
 
Paul

View 1 Replies View Related

'isNull(Field1,0)' Should Return 0,but It Didn't, WHY?

Mar 4, 2004

--create a temp table like:
select * into #tmp from
(select 1 as ID
union all select 2
union all select 3
union all select 4
) as A

-then run this query:
select B.ID,isNull(B.GID,0) as GID from
(select #tmp.ID,A.GID
from
#tmp
left outer join
(select ID,1 as GID from #tmp where ID in (2,4)) A
on #tmp.ID = A.ID
) as B

--I thougth it should return:
10
21
30
41
--but it actually returned:
IDGID
11
21
31
41
--if I change GID value in '...(select ID,1 as GID from #tmp where ID in (2,4)...', for example 2, then it return:
IDGID
12
22
32
42

WHY?

View 4 Replies View Related

Maintenance Tasks Didn't Install

Oct 9, 2007

Hi There

I have just done my first clean install of SQL 2005. I have previously upgraded several boxes from SQL 2000 without incident.

The clean install seemed to go fine but the Maintenance Tasks didn't install? I have looked on the web but have been unable to unearth any information. Has anyone encountered this before and if so I how do I add Maintenance Tasks to the Management folder?


View 6 Replies View Related

Distribution Agent Failed But Didn't ???

Nov 15, 2005

Hi There

View 1 Replies View Related

SQLXML4 Didn't Install For SQLExpress

Apr 4, 2006



I just noticed that SQLXML4 did not install when I installed SQLExpress Advanced package (Mar 2006).



Anyone know if I can install SQLXML4 separately for SQLExpress Advanced or do I need to uninstall and re-install the entire package?



Thanks,



Paul

View 1 Replies View Related

ReportViewer ASP Component RefreshReport Didn't Appear.

Jul 27, 2007

Hi every body !
I try to insert the reportViewer in my asp page, all is good, but if I want to change (by choosing another report), and i cannot call the method RefreshReport() as I saw in the msdn documentation.
I didn't understand why, I download the ReportViewer from msdn download : the version is 2.0.50727.42 from 22/01/2006...
I implement in my asp designer tools the following dll : Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.dll 9.0.1399.1 from 14/10/2005

Did I forget any code line ? or did I download a bad version ?



Code Snipp




ReportViewer1.ServerReport.ReportPath += "CounterReport";

ReportViewer1.Refre.... //Visual studio didn't propose the method !!

View 1 Replies View Related

SSIS Job Success But Package Didn't Run

Mar 16, 2007

I created a SSIS package that imports a file then moves the file to a folder called processed.
I created a job that runs the package. The pack works fine when I run it from the SQL Storage Area. When I run the job I get the following message:


Started: 9:58:15 AM DTExec: The package execution returned DTSER_SUCCESS (0). Started: 9:58:15 AM Finished: 9:58:21 AM Elapsed: 6.047 seconds. The package executed successfully. The step succeeded.

showing that the job supposedly completed successfully.


I know that the package the not run because the data did not get imported and the file did not move.

Can anyone explain the package may not run but we still get a job completion status of success?

View 6 Replies View Related

ID Who Didn't Visited A Summary Page Per Day (was Help With Query)

Mar 9, 2006

I have 1 table:
ID pagename datevisited
1default01/01/2006
1info01/01/2006
1default02/01/2006
1info02/01/2006
1summary02/01/2006
2default02/01/2006
2info02/01/2006
2summary02/01/2006

I need to run query for ID who didn't visited a summary page(per day)
How do I do this?

View 1 Replies View Related

Backup Plan Didn't Remove The Old Files

Nov 28, 2005

Hello, everyone:

I have a backup plan that remove the old backup files more than two days. Last Monday, the SQL Server restart. Since that, the backup is fine, but it didn't remove the old backup files. Why and how to handle that? Thanks

ZYT

View 2 Replies View Related

Two Tables Have A Column In The Same Name. It Didn't Output Correctly

May 16, 2007

I have a very weird problem.

I ran a SQL statement to get the data from two tables using join. These two tables have a column in the same name €śID€?.

SQL=€?select * from table1 a, table2 b where a.ID=b.ID€?
Set RS=DB.Execute(SQL)

The statement worked. But when I output the records in my ASP pages, I got an error:
ADODB.Recordset error '800a0cc1'
Item cannot be found in the collection corresponding to the requested name or ordinal€?

This is the line caused error:
<%= RS(€śa.ID€?) %>

It seemed that SQL Server recordset doesn€™t carry the table aliens. If I removed a. from ID the error was gone but it gave me the value of b.ID.

How to solve the problem? Thank you.

View 4 Replies View Related

The User's Select Query Should Be Denied But It Didn't?

Nov 24, 2006

hi ..

my problem is
i create a user in sqlserver from enterprise manager as follows:-

1- goto logins and new login
2-type a name and choose sqlserver authentication and type a password
3- from server roles tab i choose system administrators
4 from database access i choose the database i need that user to connect to .and OK
5-i goto database node in enterprise manager and select the database and the table
and double click on it and choose permissions and de-select the SELECT privilige

then i use ADO to connect to sqlserver through that user and when i select(SQL query) the table the data appeared normally !!!! and it suppose to give me exception

thanks in advance.

View 6 Replies View Related

Indirectly Config The Package But It Didn't Affected

May 6, 2006

Dear all,
I have built an SSIS package by using the BI Dev Studio and enabled its configuration xml file.
The package have a variable called TranDate and I want to put it dynamically from a Calendar on my website (just like assigning a variable).
I have successfully change the value of that variable in the configuration files (affected to the xml file).
Then I loaded the package and executed it (through my web). It's still get the old value (which I have assigned while creating the package).
I didn't understand that where else can the package get the value of that variable so it still get the old value (that value have never appeared in the xml configuration file anymore when I changed it).

Thanks for reading this, and I am looking forward to seeing any helps from you guys.


View 3 Replies View Related

Precedence Constraint In SSIS Didn't Work

Aug 27, 2007

Dear all,
I've been searching the article for error handling in SSIS but seems no article have same problem exactly as mine. In my package there's container, it contains Data Flow task and some of Script tasks. I put an error precedence from Data Flow task into Script task that contains script for log an error that might be occured. The Data Flow task imports data from flat file into SQL Server 2005 and I've set a semicolon as the column delimiter. Unfortunately there is a data in flat file that had one column contain semicolon as its value.
This would trigger an error and I hope the error would be logged into a table as I wrote inside Script task. But it didn't work. The error precedence won't work, the package stop in flat file source instead. I've been trying the event handler but it didn't work either. Maybe I got wrong implementation, anybody can help me explain the error handler and solve the problem ?
Here is the capture of my package, since I didn't know how to attach the picture in this forum.
Thanks in advance.


Best regards,

Hery

View 12 Replies View Related

MDX Date Range Report - Didn't Get Correct Result

Aug 5, 2014

I am doing search through Date Range but didn't get correct result.

For Example if i created a Task on 5/8/2014 and when i have take Date Range from 1/8/2014 to 6/8/2014 then didn't get 5/8/2014 data in result but when i taken range from 1/8/2014 to 5/8/2014 then got the 5th Date data.

I am taking Range Inclusive Operator(:).

SELECT ( STRTOMEMBER(@FromDate) : STRTOMEMBER(@ToDate) )

View 1 Replies View Related

SP2 Didn't Upgrade SQL Server Tools And Workstation Components

Mar 13, 2007

Greetings,

I thought I had applied sp2 successfully but I discovered when I tried to apply the hotfix ( sqlserver2005-kb933097-x86-enu.exe), that the SQL Server Tools and Workstation Components wasn't at the 3042 level.

The recommendation in the log file is to:

"Update 3152 is dependent on prerequisite update 3042. Exit setup and refer to the Knowledge Base article to find the prerequisite patch."

Does anyone know where I find the prerequisite patch?

Any help would be appreciated.

Regards Noel



Time: 03/13/2007 18:05:39.045
KB Number: KB933097
Machine: NOEL_EVO
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3152
Command-line parameters specified:
Cluster Installation: No

**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed

**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
SQL Server Database Services 2005 (SQL2005) ENU SP1 2005.090.3042.00 x86 DEVELOPER
SQL Server Analysis Services 2005 (SQL2005) ENU SP1 2005.090.3042.00 x86 DEVELOPER
SQL Server Reporting Services 2005 (SQL2005) ENU SP1 9.00.3042.00 x86 DEVELOPER
SQL Server Notification Services 2005 ENU SP1 9.00.3042.00 x86 DEVELOPER
SQL Server Integration Services 2005 ENU SP1 9.00.3042.00 x86 DEVELOPER
SQL Server Tools and Workstation Components 2005 ENU SP1 9.1.2153 x86 DEVELOPER

**********************************************************************************
Products Disqualified & Reason
Product Reason
SQL Server Tools and Workstation Components 2005 The product instance SQL Tools does not have prerequisite update 3042 installed. Update 3152 is dependent on prerequisite update 3042. Exit setup and refer to the Knowledge Base article to find the prerequisite patch. Install the prerequisite and rerun the installation.

View 1 Replies View Related

Replication Folder's Didn't Locate Local Publications,need Help!

Apr 20, 2007

Hi,
i'm doing POS system by using C# in visual studio 2005. Recently, i installed the microsoft sql server management studio on my pc, i plan to do merge replication through local publications between my pocket pc and my pc. So, i opened the replication file which is under Object Explorer in microsoft sql server management studio, it ONLY show me the local subscription folder under the replication file.Do i install incomplete set of microsoft sql server management studio?Local publications and local subscription, which one is more suitable for POS system?

View 11 Replies View Related

DBCC Srhinkfile Didn&#39;t Shrink The File But Expand The Database Instead!!

Apr 6, 2001

I have a 2.8G SQL 7 database with 1.6G used space. I want to shrink it to 1.8G, but after I issued the 'DBCC srhinkfile(datafile, 1800)', it didn't shrink the file, instead it expanded to 2.7G used space? I tried on a test server, the command worked every time although the time to complete the task tended to increase every time.

I did the DBCC DBREINDEX (fill factor 90) and updated usage, the size didn't change. DBCC CHECKDB, CATELOG AND SHOWCONTIG were all performed and there wasn't any error or fragmentation.

Now I'm wondering what's the actual size of my database, 1.6G or 2.7G? If there's a way that I can get back close to my original used sized, then I can try to shink the file again. Any comment is welcome. Thanks advance.

View 4 Replies View Related

Analysis :: Sales Fact Table - Customer Who Didn't Buy Top 10 Products

Nov 3, 2015

We have a sales fact table that has sales by customers, products, date etc. and dimension tables such as customers, products etc.

We built a multi-dimensional cube on top of these tables. how do we support queries like "show me top 10 products by sales amount and then show customers that didn't buy these products"?

View 4 Replies View Related

Error 8525: Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

May 31, 2008

Hi All

I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.

If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.

I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.

set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN


It's got me stumped, so any ideas gratefully received.Thx

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved