I have been working on this problem for days. I have a report that is grouped
and will be printed duplex (front and back). There is a page break after each
group. I want to ensure that the start of a new group does not end up printed
on the back side of an old group. For example:
Page 1 (printed on front side of paper): group 1
Page 2 (printed on back side of paper): more group 1
Page 3 (printed on front side of paper): more group 1
Page 4 (printed on on back side of paper): group 2 <--- This is a problem
I need:
Page 1 (front side): group 1
Page 2 (back side): more group 1
Page 3 (front side): more group 1
Page 4 (back side): <This Page Intentionally Left Blank>
Page 5 (front side): group 2
Issues that I've run into include the fact that SSRS renders the entire body
first, before rendering the header/footer. This prevents the body of the
report from knowing which page it will end up on when it is rendered (and is
also why you cannot reference Globals!PageNumber from the body).
The restriction above also prevents using a variable in custom code to know
when to generate a page break. If you set this variable in the header/footer
then the body will never see it as the entire body is rendered first and will
therefore only see the initial state of the variable.
I have seen this issue posted in a number of places,
but no one ever has a solution to this (except switching back to
Crystal Reports). Have any MVPs ever addressed this issue? I am
really hoping someone can offer a good solution or work-around.
So I have been asked by our sustainability person to create report from our printing data that actually shows the number of pieces of paper used. This is easy enough for single-sided printing, but when printing in duplex the software does not take into account that 3 printing pages actually equates to 2 pieces of paper. I know this sounds simple, but say I have a print job record that looks like this:
This is a print jobs that if done correctly is actually 21 pages( duplex printing). If the job is say total_pages =5 I cant just divide by 2 because its actually using 3 pieces of paper ( yes they are wanting this data don't ask why). How can I adjust some sql to accurately depict 5 pages, front and back, as 3 pieces of paper?
We have never been able to get the printing to work on any of our reports using SQL Server Reporting Services 2005 SP2 in our production environment. Without this feature of printing a report, we cannot go live with SSRS at all.
We have tried adding the SP2 after a clean install on a new server -- yet we still have this problem.
I read a few some posts about uninstall the old ActiveX control used for printing, so I did this and installed the new one but that didn't help either.
We can print to files without issue - only when we try to print to a real printer does it hang forever.
It doesn't matter how big the report is, 100 pages or 1/4 of a page, same problem.
We do the following:
1) Run the report 2) Click the print button 3) Select a printer and press ok 4) "Printing Now..." dialog box appears 5) "Print Error" dialog appears and never goes away - and nothing is printed out. Have to close IE and crash the report session to get out of it.
This is the result on every client computer we have ever used in trying to access the report server.
It also hangs in running a Print Preview for all reports.
We are printing to network printers from IE6 and IE7.
Since this is on a server, we do not have a local printer to this server computer to try to print to. Even if it worked on a local printer, this is supposed to be an enterprise solution. Almost all of our employees print to network printers.
I am logged into my machine as a domain admin. I have no printing problems in any program printing to any printer, except when using Reporting Services.
We are trying to print from an ASP web application which runs the reports in an iframe using URL access.
We are able to print the same reports on all of our development environments using the same ASP web application and RDL.
I have reports, set to print on Landscape and Legal ie 14 * 8.5. However, when certain users try to print the report, it prints it in Letter, even though the report is set to print in legal /landscape.
The strange part is that for most users it prints correctly in legal, only for some it is on letter. Any idea why this would happen?
I want to be able to grant the ability to print and export reports in Report Manager to individual users or a group of users. I know I can disable or enable printing and exporting for all users. What I would like to do is create user groups and place everyone who needs to ability to print or export into those groups.
I have a report that is a little wide, and when I export it to an Excel file it spans about 2 pages. I have it set to an 8.5 height and 11 width for printing in landscape on normal-sized paper. But is there a way to make sure that the report exports with the printing page break covering the entire width so that the report prints only one page across? The users don't want to resize in Excel before printing.
I must confess it has been a long time since I have done any SSRS reporting. I have the following SQL Statement (I will change it to a stored Procedure with parameters once I get the design done):
SELECT rc.wo_id, rc.process_id, rc.item_id, rc.lot_no AS full_lot_no, rc.oper_id, rc.seq_no, CAST(la.attr_value AS DECIMAL(12, 2)) AS weight,
[Code] ....
This gives me the data I want which looks like this:
The grouping is on the Rework ID. Any of the pieces can be put on any rework route. As you can see, there are 4 routes, but 5 pieces. What I need is for each rework ID to be printed on its own paper even if there is only 1 record for the route. So I would expect 4 pieces of paper, 3 with 1 record, the 4th with two pieces. Is there a setting in the Tablix or report that I can set, or is there an expression I can use?
We have SSRS reports hosted on a terminal server. When user clicks PRINT button, there is a prompt "Printing is not available. Verify that ActiveX is enabled,..." When logs on as Admin, we can install this ActiveX, however normal users won't have the privilege.
I have a local report for which i am binding the Dataset dynamically. I am trying to print this report using a seperate button on the page. I saw in the forums saying that the reportviewer can be converted to an EMF file, bind this to an image control and can Print this image using Javascript.
Can anyone help me with the sample code to print local report from the reportviewer (it may be in any approach.)
I have an RDL report that has tables which are hidden based on expression. When I chose Run, they are appropriately hidden or visible. However, when I chose print, all tables are printed, even if they are invisible in the run version.
I am trying to print a report in landscape mode from VS 2003 from designer preview or at run time. The users don't want to change a mode manually. I tried to make width 11 or 11.5 in and height 8.5in with zero margins and 0.5in (tried a lot of combinations) - doesn't work! still printing in portrait. Please help! Thank you
I have created reports using sql server Reporting serivce 2005.While printing i am running into issue.The issue is after each page ,a new blank page get inserted .For 2 pages i am getting 2 blank pages inserted between .
How to work around this .Please any one let me know .Thanks in advance .
I am having a unique problem with the Reporting server. We are using SQL Server 2005 and we have a dedicated server for reports. I created a report for creating labels and it is workinf fine in my development environment (running it through Visual Studio) but goes way off while printing it from the reporting server. I wanted to check the rdl files in the server in which I deployed but could not find it. I would really appreciate if you can give me a solution by which label printing could be done without any problem in the server.
Hi, I am using Reporting services 2000 in asp.net application.Everything is working fine ,but when I am trying to get a print using Internet Explorer Printing options ,the toolbar of the report is also coming into the print preview.I want to get rid of it.I want only the report no toolbar. Can anybody help me? Thanks!!
I have written an application with VB.Net. It display a report written using Reporting Rervices (rdl) in the ReportViewer Contol. When I run the application locally under windows, I can print the report just fine. When I run it under Terminal Services, sometimes it takes 2 or 3 times to print. Sometimes it never does. It looks like it prints the pages because the popup displays and it shows it is printing but it never does.
If I bring up the queue for the printer to watch when I print, then click the Print button on the the ReportView contol, I see the print enter the queue on the printer and then it is deleted but nothing prints. If I do it all again, the same thing happens but it may or may not print.
The applicatoin is written in VB.Net under Visual Studio Professional SP1.
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified. Restored my Reportserver and ReportserverTempDB databases Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script) at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'? Is it possible to migrate from 32bit to 64bit?
I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?
SQL 2012. VS2013..I have created a SSIS package that generated a pdf report and a script task that prints the pdf reportScript task
Public Sub Main() ' Dim pdfFileName As String = Dts.Variables("User::CUR_ADDACSReport").Value.ToString Dim PrintPDF As New ProcessStartInfo PrintPDF.UseShellExecute = True PrintPDF.Verb = "print" PrintPDF.WindowStyle = ProcessWindowStyle.Hidden PrintPDF.FileName = pdfFileName Process.Start(PrintPDF) ' Dts.TaskResult = ScriptResults.Success End Sub
When I run the SSIS package from VS2013 it executes and the report is printed, however when I deploy it to the SQL server as an agent job, the package executes, but the report is not pronted.
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets? Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
We are required to gather certain information regarding reporting services.
Which reports were requested, by whom , how long did they run for, what parameters were passed etc etc.
I see that the system tables do provide some of this information, is there a 3rd party tool or something we can use to gather all this type of information for us?
Hi, I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services. In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found" Does anyone have any ideas? Thanks
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
I think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension.. Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT { [Time].[Month].&[2006-09-01T00:00:00] , [Time].[Month].&[2006-10-01T00:00:00], [Time].[Month].&[2006-11-01T00:00:00], [Time].[Month].&[2006-12-01T00:00:00] } on COLUMNS, { [Measures].[Unique Users], [Measures].[UU Pct 1], [Measures].[UU Pct 2], } ON ROWS FROM [Cube]
