Below is a snippet of MS SQL inside ASP that retieves
Commodity info such as product names and related information and returns the results in an ASP Page. My problem is that with certain searches, elements returned in the synonym field repeat. For instance, on a correct search I get back green, red, blue, and yellow which is correct. On another similar search different commodity say for material, I get Plastic, Glass,Sand - Plastic, Glass,Sand - Plastic Glass Sand. I want to remove the repeating elements returned in this field. I hope this makes sense.
PS I tried to use distinct but with no luck I want just one of each in the example below.
Thanks in Advance!
Scott
==============================
SQL = ""
SQL = "SELECT B.CIMS_MSDS_NUM," & _
"A.COMMODITY_NUMBER, " & _
"B.CIMS_TRADE_NME," & _
"B.CIMS_MFR_NME," & _
"B.CIMS_MSDS_PREP_DTE," & _
"B.APVL_CDE," & _
"COALESCE(C.REGDMATLCD,'?') AS DOTREGD," & _
"COALESCE( D.CIMS_TRADE_SYNM,'NO SYNONYMS') AS SYNONYM, " & _
"A.MSDS_CMDTY_VERIF, " & _
"A.CATALOG_ID " & _
"FROM ( MATEQUIP.VMSDS_CMDTY A " & _
" RIGHT OUTER JOIN MATEQUIP.VCIMS_TRD_PROD_INF B " & _
" ON A.CIMS_MSDS_NUM = B.CIMS_MSDS_NUM " & _
" LEFT OUTER JOIN MATEQUIP.VDOT_TRADE_PROD C " & _
" ON A.CIMS_MSDS_NUM = C.MSDSNUM " & _
" LEFT OUTER JOIN MATEQUIP.VCIMS_TRD_PROD_SYN D " & _
" ON B.CIMS_MSDS_NUM = D.CIMS_MSDS_NUM) "
Below is a snippet of MS SQL inside some VB that retieves Commodity info such as product names and related information and returns the results in an ASP Page. My problem is that with certain searches, elements returned in the synonym field repeat. For instance, on a correct search I get green, red, blue, and yellow which is correct. On another similar search with different commodity say for material, I get Plastic, Glass,Sand - Plastic, Glass,Sand - Plastic, Glass, Sand. I want to remove the repeating elements returned in this field. IOW, I just need one set of Plastic, Glass and Sand. I hope this makes sense.
Below is the SQL and the results from the returned page.
PS I tried to use distinct but with no luck I want just one of each in the example below.
Thanks in Advance!
Scott
==============================
SQL = "" SQL = "SELECT B.CIMS_MSDS_NUM," & _ "A.COMMODITY_NUMBER, " & _ "B.CIMS_TRADE_NME," & _ "B.CIMS_MFR_NME," & _ "B.CIMS_MSDS_PREP_DTE," & _ "B.APVL_CDE," & _ "COALESCE(C.REGDMATLCD,'?') AS DOTREGD," & _ "COALESCE( D.CIMS_TRADE_SYNM,'NO SYNONYMS') AS SYNONYM, " & _ "A.MSDS_CMDTY_VERIF, " & _ "A.CATALOG_ID " & _ "FROM ( MATEQUIP.VMSDS_CMDTY A " & _ " RIGHT OUTER JOIN MATEQUIP.VCIMS_TRD_PROD_INF B " & _ " ON A.CIMS_MSDS_NUM = B.CIMS_MSDS_NUM " & _ " LEFT OUTER JOIN MATEQUIP.VDOT_TRADE_PROD C " & _ " ON A.CIMS_MSDS_NUM = C.MSDSNUM " & _ " LEFT OUTER JOIN MATEQUIP.VCIMS_TRD_PROD_SYN D " & _ " ON B.CIMS_MSDS_NUM = D.CIMS_MSDS_NUM) "
I'm extracting data from a log (log_history) of patients where nurses perform various actions on a call, such as assessing and reassessing, despatching etc. This is the script:
Select L.URN, LH.THE_TIMESTAMP, LH.ACTION_TYPE, LH.ACTION_BY, LH.ACTION_REQD, LH.NOTE, em.position_type_ref From LOG L Join Log_history LH on (L.URN = LH.LOG_URN) left outer join employee em on (em.code = LH.action_by) Where (L.Taken_at >= :DateFrom and L.Taken_at <= :DateTo) and (LH.ACTION_TYPE = 'D') and (em.position_type_ref ='NU')
Order By L.URN ASC, LH.THE_TIMESTAMP DESC
The result I get shows duplicate 'timestamp' entries and I only want to return unique timestamp entries. Does anyone have any ideas. I'm self taught and have hit a wall
I have an application that allows the user to enter data into a table. There are multiple users so I put in some code that, I thought, would keep 2 users from creating a new record at the same time. The IDs for the records are identical and this is causing a problem.
The IDs are in the format of ####-mmyy. at the start of each month the #### part goes back to 1.
We tried a test today where we had 2 users click on the New button at exactly the same time. The IDs that were created were identical. Is there anyway on the database that I can prevent this from happening?
Here is how I create the new record id:
I get the MAX(ID) from the table I add 1 to the ID and then insert a new record with the new ID into the table.
I have an issue where certain parts of data are repeated several times after i create my query. Without providing my SQL code for now could anyone suggest possibly the main reason(s) for data being duplicated?
I am a newb at ms sql and was hoping someone could help me eliminate duplicate PRODUCT.PRODUCT from this statement. I have tried using DISTINCT with the same results.The ProductImage table is causing this because the duplicates are from the PRODUCT.PRODUCT that have more than 1 image.
If anyone could rewrite this statement so I can learn from this, it would be most appreciated!
Hi. I have a table with Login and Logoff Time of users, but there could be duplicate Logtimes in the dataset, but for different products. Because of this I cant do a distinct in the dataset. I need the Product and some other details in my Report.
I tried to make two datasets. One for the Select distinct and one for the other.
But the Problem is: in my report, I need a table, where I make the Sum of the Logintime a day and in another column I calculate with data from the other dataset.(Logtime + data from dataset2). But this doesnt work, so I think, that is it not possible to join 2 dataset in one table.
Hi! I am joining 3 tables in SQL , I am getting the results I want exept it's duplicated. So the resultinmg table fom my stored procedure has 3 rows that have the same bulletin. How do I filter the storedprocedure to output only the rows that don't have duplicate entries for the column 'Bulletin' Thanks. Here is my stored procedure:PROCEDURE [dbo].[spGetCompBulletins] @Userid uniqueidentifier OUTPUT,@DisplayName varchar(200)
AS
SELECT * FROM dbo.UserProfile INNER JOIN dbo.bulletins ON dbo.UserProfile.UserId = dbo.bulletins.Userid INNER JOINdbo.Associations ON dbo.Associations.BusinessID = dbo.bulletins.Userid WHERE UserProfile.DisplayName=@DisplayName and Userprofile.Userid = @Userid ORDER BY Bulletins.Bulletin_Date Return
Hi all.. I've been scouring the forums for about 6 hours to no avail. This is a really simple question. I'm trying to have a registration page that lets the user input name, email, desired username, and password. I want to check the username and email fields to make sure ppl cannot sign up twice. So from what I've gathered I have a couple of options:
1) i can set up a unique constraint on the database columns, 2) i can run a select statement before inserting, 3) i can store the whole database column in a variable then search through it.
My question is how to do option 2? All of my transactions are through a sqldatasource object in c#.
Yet another simple query that is eluding me. I need to find records in a table that have the same first name and last name. Because the table has a primaty key, these people were entered twice or they share the same first and last name.
How could you query this:
ID fname lname 10001 Bill Jones 10002 Joe Smith 10003 Sue Jenkins 10004 John Sanders 10005 Joe Smith 10006 Harrold Simpson 10007 Sue Jenkins 10008 Sam Worden
and get a result set of this:
ID fname lname 10002 Joe Smith 10005 Joe Smith 10003 Sue Jenkins 10007 Sue Jenkins
Hi I am trying to insert entries in a table which has a composite primary key and i am inserting it on UID basis.
INSERT INTO TABLE_B (TABLE_B_UID,NUM_MIN, NUM_MAX,BIN, REGN_CD, PROD_CD, CARD) (SELECT UID,LEFT(NUM_MIN,16),LEFT(NUM_MAX,16),BIN, REGN_CD, PROD_CD, CARD FROM TABLE_A WHERE UID NOT IN (SELECT TABLE_B_UID FROM TABLE B))
When i insert it tries to insert a duplicate entries and gives me an error. Since I am new to SQL SERVER 2000 i need some help. I tried IF NOT EXISTS, EXCEPT but i guess i am wrong at the syntax.
I have a table with no primary key and i just want to see all the duplicate entries on the basis of two columns. Can anyone suggest me how should i go about it.
Can anyone provide me the syntax for the same? I have only 1 table say ISSR_TBL and two columns using which i want to delete the duplicate ones. i.e. MIN and MAX.
I have a database being populated by hits to a program on a server.The problem is each client connection may require a few hits in a 1-2second time frame. This is resulting in multiple database entries -all exactly the same, except the event_id field, which isauto-numbered.I need a way to query the record w/out duplicates. That is, anyrecords exactly the same except event_id should only return one record.Is this possible??Thank you,Barry
Here is my situation. I have a table in my application that pairs users with cars they like. We'll call this table Favorites. A user can browse the site and they can designate as many cars they want as favorites. For example, a user can go to the Honda Accord page and add that as a favorite car and then go to the Toyota Camry page and add that as a favorite car. However, if he/she goes to that Honda Accord page and tries to click the "Add to Favorites" button again, at the present state of my application, it will just add another entry into the Favorites table with a duplicate pairing. So, if I were to datalist the table to generate a listing of all favorites belonging to a certain user, he/she may potentially be returned with superfluous duplicate entries. Not to mention, taking up valuable database space and not looking very professional. In my Favorites table, the 3 fields are.....favoriteId (set as primary key)userIdcarId I've been thinking about this for awhile and I've come up with 2 solutions. I'm a newbie to ASP.NET/programming so I don't have enough insight to make a decision or to even think up of other alternatives. 1) Check proactively by doing a.....SELECT favoriteID FROM Favorites WHERE userId = x and carId = y (where x and y are variables)If I get a null return, it means I can go ahead and let the user add the car as a favorite in the database. If I get a valid value, then it means there already exists the same pairing, so I exit out without updating the table. 2) Check reactively by forcing an exception whenever a user tries to enter a duplicate pairing. I'm not sure how to do this, but perhaps, instead of making "favoriteId" a primary key, perhaps, I can make a primary key pairing of "userId" and "carId". And by trying to do an insert with a primary key that already exists, we know it won't work since primary keys by definition are unique. Now, I expect some concurrent users on my site, so I must take into consideration pros and cons of each and determine which is more efficient. Checking proactively will force a check even if the table does not contain a duplicate pairing of user and car. However, having a duplicate primary key may be more expensive from a database point of view and may slow down lookups, etc. Or maybe neither has significant benefits, in which case, I rather go with proactive, since I've already coded it and it works fine. Or maybe there is a third alternative, which I did not think. Which method do programmers usually take and which is a better practice? TIA for your help.
Someone ran an update statement multiple times so their are multiple entries in the table. Â What is the quickest way to track down the multiple entries? Â I would only want to see where timein and timeoff exist in the table multiple times for the same id. Â So this would be a duplicate
EntryID -- ID Â -- timein -- timeoff 1487 Â 11 Â Â 2015-05-05 16:33:23 Â 2015-05-05 18:45:26 1623 Â 11 Â Â 2015-05-05 16:33:23 Â 2015-05-05 18:45:26
What is the best way to compare two entries in a single table wherethe two fields are "almost" the same?For example, I would like to write a query that would compare thefirst two words in a "company" field. If they are the same, I wouldlike to output them.For example, "20th Century" and "20th Century Fox" in the companyfield would be the same.How do I do this? Do I need to use a cursor? Is it as simple as using"Like?"
I am using Sql Server 2000. I have a customer table with fields - CustId, Name, Address, City, StdCode, Phone. I used to insert entries in this table from an excel file. One excel file will contain thousands of customer. In this table combination of StdCode and Phone should not be repeated. If I do it in my VB.Net coding.then application gets drastically slow. So I want to write a procedure or trigger for this. Here what I will do, I will send all records into database then this trigger or procedure will check for any existing entry of combination of StdCode and phone. If entry exists then this will delete new entry or will not allow this new entry. Is this possible to do using Trigger or stored procedure?
How can I delete duplicate entries from tables in my database using Query Analyzer, as there are many duplicate entries in my tables, I want to delete them.
I am using the Import/Export wizard to import data from an ODBC data source. This can only be done from a query to specify the data to transfer.
When I try to create the tables, for the query, I am getting the following error:
Msg 2714, Level 16, State 4, Line 12
There is already an object named 'UserID' in the database.
Msg 1750, Level 16, State 0, Line 12
Could not create constraint. See previous errors.
I have duplicated this error with the following script:
USE [testing]
IF OBJECT_ID ('[testing].[dbo].[users1]', 'U') IS NOT NULL
DROP TABLE [testing].[dbo].[users1]
CREATE TABLE [testing].[dbo].[users1] (
[UserID] bigint NOT NULL,
[Name] nvarchar(25) NULL,
CONSTRAINT [UserID] PRIMARY KEY (UserID)
)
IF OBJECT_ID ('[testing].[dbo].[users2]', 'U') IS NOT NULL
DROP TABLE [testing].[dbo].[users2]
CREATE TABLE [testing].[dbo].[users2] (
[UserID] bigint NOT NULL,
[Name] nvarchar(25) NULL,
CONSTRAINT [UserID] PRIMARY KEY (UserID)
)
IF OBJECT_ID ('[testing].[dbo].[users3]', 'U') IS NOT NULL
DROP TABLE [testing].[dbo].[users3]
CREATE TABLE [testing].[dbo].[users3] (
[UserID] bigint NOT NULL,
[Name] nvarchar(25) NULL,
CONSTRAINT [UserID] PRIMARY KEY (UserID)
)
I have searched the "2714 duplicate error msg," but have found references to duplicate table names, rather than multiple field names or column name duplicate errors, within a database.
I think that the schema is only allowing a single UserID primary key.
I am having problems with the "Duplicate key was ignored" warning message. The problem is that the message seems to happen randomly and cannot be reproduced. If i take the same set of data and run the stored procedure that causes the problem i don't get the warning message a second or subsequent time. Also all the SELECT statements have criteria set to remove duplicates before they are inserted into the tables.
I have a data feed that pulls data from a DB2 database to a SQL Server 2008 staging table as a flattened set of records. A stored procedure in SQL Server is run to load the data into the destination tables. The data feed is run hourly for new and updated records in DB2 Monday-Friday 09:00-17:00 and then there is a midnight run of all the records going back for the last 12 months.
The data feed was originally sent from DB2 as a CSV file and pulled into SQL Server using SSIS but is now an Informatica workflow that pulls the data directly from DB2.
It is the Informatica workflow that is returning the "duplicate key was ignored" warning message and this stops the workflow. The workflow is restarted and the data is always loaded the second time without the warning message. The warning does not happen every time the workflow is run - it can run for a number of days with no warnings and then one will come through I can see in Profiler that it is SQL Server that returns the Duplicate key was ignored warning message so it is not an issue with Informatica.
I cannot reproduce the problem to get to the root cause of the issue. I would expect that if i run the same set of data through the stored procedure i would get the warning message every time, but this is not the case. Even when i step through the stored procedure i do not get the message. As the midnight data feed returns the records from the last 12 months, so by definition would include duplicates, the warning message only appears randomly and is not consistent.
Hi, I've got what is probably a simple question, but for the life of me I cannot figure it out and it is starting to do my head in . I have the following query:- Select e.intEmployeeID AS ID, e.txtFirstName AS [First Name], e.txtLastName As [Last Name], e.txtMobile As [Mobile], i.txtWorkEmail as from EMPLOYEE AS e INNER JOIN EMPLOYEE_INFORMATION AS i ON i.intEmployeeID = e.intEmployeeID WHERE (((e.blnActive = -1) AND (e.txtFirstName Like '%b%')) OR ((e.blnActive = -1) AND (e.txtLastName Like '%b%')) ) ORDER By e.txtFirstName In my database, the field blnActive is a BIT field. When I try to run this query, I get no results returned. If I remove the (e.blnActive = -1) WHERE statement segment, I get the correct results. The field blnActive contains -1 for every record but I cannot work out why it will not return these records .... aaarrrrggghhhh Thanks to those who feel my pain !!
here is my business/data object for some reason I only get the first character back, say value is Charlie, I only get C public string GetUserName(long UserId) { try { string userName;
DiscussionDB data = new DiscussionDB(); List paramlist = new List(); paramlist.Add(data.CreateParameter("@UserId", UserId)); paramlist.Add(data.CreateParameter("@UserName", "", ParameterDirection.Output, DbType.String, 20)); data.ExecuteNonQuery("dbo.Discussion_User_Name", ref paramlist); userName = paramlist[1].Value.ToString();
return userName; } catch { throw; } }
ALTER PROCEDURE [dbo].[Discussion_User_Name] @UserId bigint, @UserName varchar(20) output AS SET NOCOUNT ON
SET @UserName = (Select [Name] from Discussion_Member WHERE UserID = @UserID)
if (@UserName is null or @UserName = '') BEGIN SET @UserName = (Select UserName from Membership_User WHERE UserID = @UserID) END
I have a small table named Exclude_Cusno_Item that has a varchar(29)Â field named
ITEM. When I query the table to show all of the records like this: Select * from Exclude_Cusno_Item
The result set contains a record with 'AAA' in the ITEM field. However, where I write a query with a WHERE clause to select this specific 'AAA' record like this:
Select * from Exclude_Cusno_Item where item = 'AAA'
I get no results. What could be happening that would prevent the 'AAA' record from appearing in the result set of this query? Note that the 'AAA' entry has no trailing or leading blanks.
How can i group the data returned by statement below by "Dept" field. I have already tried to group it like shown below but that doesn't seem to work for me. Any help. cmd_select = New SqlCommand("SELECT Incident_id,Dept From Report_Incident Group By Dept,Incident_id", myconnection_string)
I am trying to pull results from an SQL Server DB into an dataset where a particular field (SMALLDATETIME) is within a particular date range. The code I was using worked fine when the database was in Access. I have made several changes already but am still getting 0 results returned when there is data that should be returned.
I was using in Access: Dim StrSQL = "SELECT ID FROM myTable WHERE myDateField>=#" & startDate & "# AND myDateField<=#" & stopDate & "# ORDER BY ID" I have changed this for SQL Server to: Dim StrSQL = "SELECT ID FROM myTable WHERE myDateField>='01/01/2003 00:00:01' AND myDateField<='01/01/2004 23:59:59' ORDER BY ID" But I am always returned 0 results even if the date range should return plenty of data. I have also tried using the BETWEEN structure with the same result.
Is there a particular format for the date I am comparing with? Am I missing something else in my query?
The connection / permissions and everything else are correct as I can read and write data to the database in numerous other pages. It is just this date comparison that is not working.
Many thanks for any help or comments you can provide.
Can anyone tell me what the heck this is trying to tell me. I have 3 datasets I'm working with so there are errors for each here:
[rsMissingFieldInDataSet] The data set €˜Revenue_By_Client€™ contains a definition for the Field €˜Branch€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜Revenue_By_Client€™ contains a definition for the Field €˜Branch€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜Main_Dataset_AZ€™ contains a definition for the Field €˜PostedAmount_InHouse€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜Main_Dataset_AZ€™ contains a definition for the Field €˜PostedAmount_InHouse€™. The data extension returned an error during reading the field.
When querying a bit field, I am encountering a problem with MS SQLServer returning a larger number of records for a table than theactual number of records that exist within that table.For example, my customer table has 1 million unique records, so theresults of the following query are as such:select count(customer_nbr) from customer = 1,000,000There is bit field in the customer table that denotes whether acustomer has placed an order with us called. That flag is calledorder_flagIf I run the following query:select count(customer_nbr) from customer where order_flag = 1The result is 3,000,000 records.There is no logical way that this is possible, as my table onlycontains 1,000,000 unique records and the number of customers with anorder should be a subset of this.If a run the above query with a distinct before customer number, I getthe results I want:select count(distinct customer_nbr) from customer where order_flag = 1600,000 records.So while I can get to the answer I want, I have no idea why I amreturning incorrect values if I don't select distinct.Can anyone help? I checked microsoft support and message boards buthaven't seen anything.I should note that the bit field is indexed.I am not sure if that isthe problem or not.
I got this error for a calculated field that calls a public function of a custom assembly based on the report parameter values. The return type is an array of double.
Does SSRS 2005 supports the type double for a field? Can the data source of a field in a dataset be an array? Is there a way to pass the array to a field by reference and display the values at runtime?
I would appreciate any help since I could not find anything helpful on the internet and Microsoft document!
