HI ALL,
Here i am trying to build a SQL String that i can execute.For eg (@SSQL) , the final sql string will contain around 4000 chars. but when i try to build the @SSQL string and execute it gives me an error saying Connot convert to string.
Then i tried to see the length of the string built , then i noticed that it is accepting upto 256 chars not beyod that ...but i have declared the @ SSQL as varchar(8000).
Please help
thanks in advance.
Hi All
I tried to convert a SP into Dynamic SQL ...
After i tried to build a SQL String (in @SSQL) i tried to execute this but it gives me a message :Syntax error converting the varchar value '
I then tried to find out the length of the @SSQL string that i built ...and its was only 256 char its not accepting more than 256 chars .
I'm trying to have the sql in my dataset dynamic based on report parameters. I expected this to work, but doesn't. Dataset:
="select item from table where " + Parameters!SearchType.Value + " = " + Parameters!Filter.Value + "order by item"
Is this possible or do I need to take a different approach (and what would that approach be)
Thanks,
Derek
When I run the query below on my DB, it gives the following error:
Server: Msg 8114, Level 16, State 5, Procedure partstlist ...Error converting data type varchar to float.
Only after I replace the " + @d + " section with a float numnber such as 39020.5 does it work fineIt's reported that my temporary table named #tbl doesn't exist within the scope of the environment that the EXEC(UTE) command operates.Someone said that I couldn't combine dynamic SQL and temporary tables or table variables...and that I would have to use a global temp table "##tbl" or a permanent table.
So here I have appearantly a "DYNAMiC SQL & TEMPORARY TABLE" problem. That's sure.
But I don't have much knowledge and experience with SQL tables and have difficulty forming a global temp table "##tbl" or a permanent table.and I have to employ the datetime variable dynamically @d inside the Dynamic SQL string.
So what kind of a code should I use here to properly combine Dynamic SQL string with my dynamic datetime variable? I'd be grateful if you could post your code suggestions so that I can try them on my DB ..
alter PROCEDURE partslist@no INT,@dt DATETiMEASDECLARE @s VARCHAR(5000)DECLARE @d floatSET @d = CONVERT (float, @dt2)create TABLE #tbl(pageindex int IDENTITY(1,1) PRIMARY KEY , prt_name varchar(50), prt_country varchar(50) , prt_date smalldatetime, partID int , prt_cat varchar(50),prt_product_type nvarchar(10), producer_company nvarchar(50), producer_city nvarchar(50), prt_released DATETIME, dvalue float, datevalue varchar(26) )BEGiNSET ANSI_WARNINGS OFFSET ROWCOUNT @noSELECT @s = 'INSERT INTO #tbl SELECT prt_name, Countries.Val AS ''prt_country'' , prt_date, partID , partsCategories.Val AS ''prt_cat'' , partsProductTypes.Val AS ''prt_product_type'' , producers.producer_company AS ''producer_company'' , producers.producer_city AS ''producer_city'' , prt_released , CONVERT (float, prt_released) , CONVERT (varchar(26) , prt_released, 109) FROM producer_parts JOIN partsProductTypes ON (producer_parts.prt_product_type = partsProductTypes.ID) JOIN partsCategories ON (producer_parts.prt_cat = partsCategories.ID)JOIN Countries ON (producer_parts.prt_country = Countries.ID) JOIN producers ON (producer_parts.producerID = producers.producerID) WHERE prt_visible = 1 AND CONVERT (float, prt_released) > ' + @d + ' AND CONVERT (float, prt_released) < 39025.5ORDER BY prt_released DESC SELECT * FROM #tbl'EXEC (@s)SET ROWCOUNT 0ENDGO partslist 10 , '10.10.2006 10:10:10' -- This is just to test the SP.
This code may not be syntatically correct, it's a re-edited version of my code which works fine in my DB.
I am working with an ftp task which is using a file connection to send a file to a remote server. This file is going to have a dynamic name (e.g. "Orders for 2006-07-29.txt"). How can I dynamically specify the file path/name for the file connection? You can't specify a varaible through the ui.
I would imagine that you can do this through a script task but I'm not sure how to reference the connection object. any help would be greatly appreciated.
thanks,
Scott
I am trying to set sorting up on a DataGrid in ASP.NET 2.0. I have it working so that when you click on the column header, it sorts by that column, what I would like to do is set it up so that when you click the column header again it sorts on that field again, but in the opposite direction. I have it working using the following code in the stored procedure: CASE WHEN @SortColumn = 'Field1' AND @SortOrder = 'DESC' THEN Convert(sql_variant, FileName) end DESC,
case when @SortColumn = 'Field1' AND @SortOrder = 'ASC' then Convert(sql_variant, FileName) end ASC,
case WHEN @SortColumn = 'Field2' and @SortOrder = 'DESC' THEN CONVERT(sql_variant, Convert(varchar(8000), FileDesc)) end DESC,
case when @SortColumn = 'Field2' and @SortOrder = 'ASC' then convert(sql_variant, convert(varchar(8000), FileDesc)) end ASC,
case when @SortColumn = 'VersionNotes' and @SortOrder = 'DESC' then convert(sql_variant, convert(varchar(8000), VersionNotes)) end DESC,
case when @SortColumn = 'VersionNotes' and @SortOrder = 'ASC' then convert(sql_variant, convert(varchar(8000), VersionNotes)) end ASC,
case WHEN @SortColumn = 'FileDataID' and @SortOrder = 'DESC' THEN CONVERT(sql_variant, FileDataID) end DESC,
case WHEN @SortColumn = 'FileDataID' and @SortOrder = 'ASC' THEN CONVERT(sql_variant, FileDataID) end ASC And I gotta tell you, that is ugly code, in my opinion. What I am trying to do is something like this: case when @SortColumn = 'Field1' then FileName end,
case when @SortColumn = 'FileDataID' then FileDataID end,
case when @SortColumn = 'Field2' then FileDesc
when @SortColumn = 'VersionNotes' then VersionNotes
end
case when @SortOrder = 'DESC' then DESC
when @SortOrder = 'ASC' then ASC
end and it's not working at all, i get an error saying: Incorrect syntax near the keyword 'case' when i put a comma after the end on line 5 i get: Incorrect syntax near the keyword 'DESC' What am I missing here? Thanks in advance for any help -Madrak
hi
I had a view in which I did something like this
isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005.
When I change the query to fld as 'alias' then it works ok in sql 2005 .
why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
Thanks in advance.
Hi Craig/Kamal,
I got your email address from your web cast. I really enjoyed the web cast and found it to be
very informative.
Our company is planning to use SSIS (VS 2005 / SQL Server 2005). I have a quick question
regarding the product. I have looked for the information on the web, but was not able to find
relevant information.
We are getting Source data from two of our client in the form of Excel Sheet. These Excel sheets
Are generated using reporting services. On examining the excel sheet, I found out that the name
Of the columns contain data itself, so the names are not static such as Jan 2007 Sales, Feb 2007 Sales etc etc.
And even the number of columns are not static. It depends upon the range of date selected by the user.
I wanted to know, if there is a way to import Excel sheet using Integration Services by defining the position
Of column, instead of column name and I am not sure if there is a way for me to import excel with dynamic
Number of columns.
Your help in this respect is highly appreciated!
Thanks,
Hi Anthony, I am glad the Web cast was helpful.
Kamal and I have both moved on to other teams in MSFT and I am a little rusty in that area, though in general dynamic numbers of columns in any format is always tricky. I am just assuming its not feasible for you to try and get the source for SSIS a little closer to home, e.g. rather than using Excel output from Reporting Services, use the same/some form of the query/data source that RS is using.
I suggest you post a question on the SSIS forum on MSDN and you should get some good answers.
http://forums.microsoft.com/msdn/showforum.aspx?forumid=80&siteid=1
http://forums.microsoft.com/msdn/showforum.aspx?forumid=80&siteid=1
Thanks
Craig Guyer
SQL Server Reporting Services
Hi,
I have a need to display on screen AND email a pdf report to email addresses specified at run time, executing the report with a parameter specified by the user. I have looked into data driven subscriptions, but it seems this is based on scheduling. Unfortunately for the majority of the project I will only have access to SQL 2005 Standard Edition (Production system is Enterprise), so I cannot investigate thoroughly.
So, is this possible using data driven subscriptions? Scenario is:
1. User enters parameter used for query, as well as email addresses.
2. Report is generated and displayed on screen.
3. Report is emailed to addresses specified by user.
Any tips on how to get this working?
Thanks
Mark Smith
If anyone could confirm...
SQL Server 2000 SP4 to multiple SQL Server 2005 Mobile Edition on PDAs. My DB on SQL2k is published with a single dynamic row filter using host_name() on my 'parent' table and also join filters from parent to child tables. The row filter uses joins to other tables elsewhere that are not published to evaluate what data is allowed through the filter.
E.g. Published parent table that contains suppliers names, etc. while child table is suppliers' products. The filter queries host_name(s) linked to suppliers in unpublished table elsewhere.
First initial sync with snapshot is correct and as I expected - PDA receives only the data from parent (and thus child tables) that matches the row filter for the host_name provided.
However - in my scenario host_name <--> suppliers may later be updated E.g. more suppliers assigned to a PDA for use or vice versa. But when I merge the mobile DB, the new data is not downloaded? Tried re-running snapshot, etc., no change.
Question: I thought the filters would remain dynamic and be applied on each sync?
I run a 'harmless' update on parent table using TSQL e.g. "update table set 'X' = 'X'" and re-sync. Now the new parent records are downloaded - but the child records are not!
Question: I wonder why if parent records are supplied, why not child records?
If I delete existing DB and sync new, I get the updated snapshot and all is well - until more data added back at server...
Any help would be greatly appreciated. Is it possible (or not) to have dynamic filters run during second or subsequent merge?
I have tried building an Inline TVF, as I assume this is how it would be used on the DB; however, I am receiving the following error on my code, I must be missing a step somewhere, as I've never done this before. I'm lost on how to implement this clr function on my db?
Error:
Msg 156, Level 15, State 1, Procedure clrDynamicPivot, Line 18
Incorrect syntax near the keyword 'external'.
CREATE FUNCTION clrDynamicPivot
(
-- Add the parameters for the function here
@query nvarchar(4000),
@pivotColumn nvarchar(4000),
[code]....
I am writing a pgm that attaches to a SQL Server database. I have an Add stored procedure and an Update stored procedure. The two are almost identical, except for a couple parameters. However, the Add function works and the Update does not. Can anyone see why? I can't seem to find what the problem is...
This was my test:
Dim cmd As New SqlCommand("pContact_Update", cn)
'Dim cmd As New SqlCommand("pContact_Add", cn)
Try
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@UserId", SqlDbType.VarChar).Value = UserId
cmd.Parameters.Add("@FirstName", SqlDbType.VarChar).Value = TextBox1.Text
[...etc more parameters...]
cmd.Parameters.Add("@Id", SqlDbType.VarChar).Value = ContactId
cn.Open()
cmd.ExecuteNonQuery()
Label1.Text = "done"
cn.Close()
Catch ex As Exception
Label1.Text = ex.Message
End Try
When I use the Add procedure, a record is added correctly and I receive the "done" message. When I use the Update procedure, the record is not updated, but I still receive the "done" message.
I have looked at the stored procedures and the syntax is correct according to SQL Server.
Please I would appreciate any advice...
I have a Stored Procedure for processing a Bill of Material.
One column on the Assembly Table is a Function Name that contains some busniess rules.
OK, now I'm doing a Proof of Concept and I'm stumped.
Huuuuh!
I will ultimately have about 100 of these things. My plan was using Dynamic SQL to go execute the function.
Note: The function just returns a bit.
So; here's what I had in mind ...
if isnull(@FnNameYN,'') <> ''
exec spinb_CheckYN @FnNameYN, @InvLineID, @FnBit = @FnBit output
CREATE PROCEDURE dbo.spinb_CheckYN
@FnNameYN varchar(50),
@InvLineID int,
@FnBit bit output
AS
declare @SQL varchar(8000)
set @SQL = '
if dbo.' + @FnNameYN + ' (' + convert(varchar(31),@InvLineID) + ')) = 1
set @FnBit = 1
else
set @FnBit = 0'
exec (@SQL)
GO
Obviously; @FnBit is not defined in @SQL so that execution will not work.
Server: Msg 137, Level 15, State 1, Line 4
Must declare the variable '@FnBit'.
Server: Msg 137, Level 15, State 1, Line 5
Must declare the variable '@FnBit'.
So; is there a way to get a value out of a Dynamic SQL piece of code and get that value INTO my OUTPUT variable?
My many thanks to anyone who can solve this riddle for me.
Thank You!
Sigh: For now, it looks like I'll have a huge string of "IF" statements for each business rule function, as follows:
Hopefully a better solution comes to light.
------ Vertical Build1 - Std Vanes -----------
if @FnNameYN = 'fnb_YN_B1_14'
BEGIN
if dbo.fnb_YN_B1_14 (convert(varchar(31),@InvLineID) ) = 1
set @FnBit = 1
else
set @FnBit = 0
END
------ Vertical Build1 - Scissor Vanes -----------
if @FnNameYN = 'fnb_YN_B1_15'
BEGIN
if dbo.fnb_YN_B1_15 (convert(varchar(31),@InvLineID) ) = 1
set @FnBit = 1
else
set @FnBit = 0
END
.
.
.
etc.
I've looked up Books Online on Dynamic Cursor/ Dynamic SQL Statement.
Using the examples given in Books Online returns compilation errors. See below.
Does anyone know how to use Dynamic Cursor/ Dynamic SQL Statement?
James
-- SQL ---------------
EXEC SQL BEGIN DECLARE SECTION;
char szCommand[] = "SELECT au_fname FROM authors WHERE au_lname = ?";
char szLastName[] = "White";
char szFirstName[30];
EXEC SQL END DECLARE SECTION;
EXEC SQL
DECLARE author_cursor CURSOR FOR select_statement;
EXEC SQL
PREPARE select_statement FROM :szCommand;
EXEC SQL OPEN author_cursor USING :szLastName;
EXEC SQL FETCH author_cursor INTO :szFirstName;
--Error--------------------
Server: Msg 170, Level 15, State 1, Line 23
Line 23: Incorrect syntax near ';'.
Server: Msg 1038, Level 15, State 1, Line 24
Cannot use empty object or column names. Use a single space if necessary.
Server: Msg 1038, Level 15, State 1, Line 25
Cannot use empty object or column names. Use a single space if necessary.
Server: Msg 170, Level 15, State 1, Line 27
Line 27: Incorrect syntax near ';'.
Server: Msg 170, Level 15, State 1, Line 30
Line 30: Incorrect syntax near 'select_statement'.
Server: Msg 170, Level 15, State 1, Line 33
Line 33: Incorrect syntax near 'select_statement'.
Server: Msg 102, Level 15, State 1, Line 35
Incorrect syntax near 'author_cursor'.
Server: Msg 170, Level 15, State 1, Line 36
Line 36: Incorrect syntax near ':'.
I have a requirment which i have partly accomplished , but could not get through completely
i have a file which comes in a standard format ending with date and seq number ,
suppose , the file name is abc_yyyymmdd_01 , for first copy , if it is copied more then once the sequence number changes to 02 and 03 and keep going on .
then i need to transform those in to new file comma delimited destination file with a name abc_yyyymmdd,txt and others counting file counting record abc_count_yyyymmdd.txt. and move it to a designated folder. and the source file is then moved to archived folder
what i have taken apprach is
script task select source file --------------------> data flow task------------------------------------------> script task to destination file
dataflow task -------------------------> does count and copy in delimited format
what is happening here is i can accomlish a regular source file convert it to delimited destination file --------> and move it to destination folder with script task .
but cannot work the dynamic pick of a source file.
please advise with your comments or solution you have
I am trying to create an ssis package with dynamic csv file as output. and out format contains query output.
sample file name:
Unique identifier + query output + systemdate();
The expression is looking like this.
@[User::FilePath] + @[User::FileName] + ".CSV"
-- user filepath is a variable from ssis package. File name is the output from SQL query. using script task i have assigned the values to @[User::FileName] .
When I debugged the script task the value getting properly but same variable am using for Flafile destination. but its not working.
I have created a dynamic SQL program that returns a range of columns (1 -12) based on the date range the user may select. Each dynamic column is month based, however, the date range may overlap from one year to another. Thus, the beginning month for one selection may be October 2005, while another may have the beginning month of January 2007.
Basically, the dynamic SQL is a derived Pivot table. The problem that I need to resolve is how do I now use this dynamic result set in a Report. Please keep in mind that the name of the columns change based on the date range select.
I have come to understand that a dynamic anything is a moving target!
Please advise.
Original suggestion for my problem was - Select * from TableA where ID not in ( Select ID from TableB)
When I run the query below using the IN operator I get 227 records returned but when I use NOT IN I get zero records when I expect well over 10,000. What am I missing?
using SQL 2000 server
SELECT LinksInfo.L_ID, LinksInfo.C_ID, Companies.C_CompanyName, Companies.C_Email, Companies.C_CompanyEmailFROM LinksInfo INNER JOIN Companies ON LinksInfo.C_ID = Companies.C_IDWHERE (LinksInfo.L_ID IN (SELECT ZL_ID FROM Location_Zip))
ZL_ID is not a primary key in Location_Zip
Hello again,
I think im missing something here, i just cant find out what it is.
I have a temp table:
CREATE TABLE #tempSearch(tempID BIGINT IDENTITY(1,1) PRIMARY KEY,username NVARCHAR(20) COLLATE Finnish_Swedish_CI_AS,lastlogin DATETIME,signupdate DATETIME)
Now i am trying to retrieve some data for each user that is inside this tempSearch list and have an id over xxx (xxx = the value of the parameter @first_id):
SELECT @sql = 'SELECT profile_publicinfo.username, profile_publicinfo.gender, profile_publicinfo.signupdate, profile_profilephoto.imageurl, profile_profilephoto.alttext, settings_username.color, profile_publicinfo.lastloginFROM #tempSearch INNER JOIN dbo.profile_publicinfo ON profile_publicinfo.username = #tempSearch.usernameINNER JOIN dbo.settings_privateinfo ON settings_privateinfo.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.profile_coolfacts ON profile_coolfacts.username = profile_publicinfo.username FULL OUTER JOIN dbo.profile_profilephoto ON profile_profilephoto.username = profile_publicinfo.usernameFULL OUTER JOIN dbo.settings_username ON settings_username.username = profile_publicinfo.usernameWHERE (profile_publicinfo.username IN (SELECT username FROM #tempSearch))AND #tempSearch.tempID >= @first_id'
SELECT @paramlist = '@first_id int'EXEC sp_executesql @sql, @paramlist, @first_id
I need to get the tempID from the tempSearch table in order to compare it with @first_id
When i run this i get the same username repeated like 30 times then it moves over to the next, when i debug the #tempSearch it looks fine, just the users that are suppose to be there.
Hi
I think I have installed MSDE sucessfully. The new servie is running, but how can I test ifit is working? Can I place my files anywhere on the system?
All help appreciated
I am using the following C#...
SQLXMLBULKLOADLib.SQLXMLBulkLoad3Class loader = new SQLXMLBULKLOADLib.SQLXMLBulkLoad3Class();
loader.ConnectionString = "PROVIDER=SQLOLEDB; Server=(local); database=TestDB; user id=test; password=password";
loader.ErrorLogFile = "C:log.txt";
loader.SchemaGen = true;
loader.SGDropTables = true;
loader.CheckConstraints = true;
loader.Execute(
"C:xsd.xsd"/* this file below */,
"C:xml.xml"
);
To generate tables in the database using the following xml schema...
(file: xsd.xsd...)
My problems is that it doesn't generate the tables and I am following the SQLXML2.0 documentation as closely as possible.
Does anyone know what I have to do to get it to generate the tables? Running it doesn't even produce an error.
Cheers,
Matt.
OK so I'm using dynamic sql to enable me to have a variable for the order by, but now it's giving me the following error
Syntax error converting character string to smalldatetime data type.
Any help is very much appreciated
Code follows
CREATE PROCEDURE spBattingAve1
@cid datetime,
@cid1 datetime,
@sid nvarchar(10)
AS
DECLARE @query nvarchar(4000)
SET @query = 'SELECT MAX(t_batting.runs) AS BestRuns,
COUNT(t_batting.dnb) AS DidNotBat, t_player.surname, t_player.firstname,
t_batting.player_id,
Sum(t_batting.runs) as SumOfruns, COUNT (*) AS Games,
COUNT (t_batting.notout) as nout,
(Sum(runs)/(COUNT(*)-(COUNT(notout)+COUNT(dnb)))) as AverageRun,
(COUNT(*)-COUNT(dnb)) AS Innings,
(SELECT COUNT(*) FROM t_batting inner join t_game on t_batting.game_id = t_game.game_id WHERE (t_batting.player_id = t_player.player_id) AND runs >= 50 AND runs <100 and t_game.date >= '+@cid+' And t_game.date <= '+@cid1+' GROUP BY t_batting.player_id) AS Overfifty,
(SELECT COUNT(*) FROM t_batting inner join t_game on t_batting.game_id = t_game.game_id WHERE (t_batting.player_id = t_player.player_id) AND runs >= 100 and t_game.date >= '+@cid+' And t_game.date <= '+@cid1+' GROUP BY t_batting.player_id) AS Overton
FROM t_batting
INNER JOIN t_game ON t_batting.game_id = t_game.game_id
INNER JOIN t_player ON t_batting.player_id = t_player.player_id
WHERE t_batting.player_id = t_player.player_id
AND t_game.date >= '+@cid+' And t_game.date <= '+@cid1+'
GROUP BY t_batting.player_id, t_player.surname, t_player.firstname, t_player.player_id
HAVING (COUNT(*)-(COUNT(notout)+COUNT(dnb))) <> 0
order by '+@sid+'
DESC'
exec (@query)
In SQL 7.0, when i use the below query in query analyzer, I got an error message. why?
======================
Set Identity_insert on
UPDATE Table1
SET no = 3
WHERE no = 4
Set Identity_insert off
go
Error message
=============
Server: Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'on'.
Server: Msg 156, Level 15, State 1, Line 7
Incorrect syntax near the keyword 'off'.
Hi,
I am on a box with 4 GB of memory that only runs SQL Server. SQL Server is using 1.7 GB as per task manager. There are a lot of databases on this box. I looked at the boot.ini and /3GB was not set. I have done this at least 50 times before: turn on the /3GB switch and SQL Server will use up to 2.7 GB per task manager. (I know it is actually 2GB and 3GB but it seems that in task manager it shows up as 1.7-1.8 and 2.7-2.8)
Anyway back to the story. So I set /3GB, rebooted the server and SQL Server still only consumes up to 1.7GB. I realize that SQL Server might not actually need more memory, but I have a distinct feeling that it wants more but is being constrained; that is, the the /3GB switch is not working. More relevant information:
1) the boot.ini line:
multi(0)disk(0)rdisk(0)partition(1)WINNT="Microsoft Windows 2000 Advanced Server" /fastdetect /3GB
2) max server memory (MB) = 3000
3) min server memory (MB) = 3000
4) awe enabled = 0
5) @@version = 8.00.2039 which is SQL Server 2000 SP4
Has anyone seen this before? Any ideas on how to troubleshoot this?
Hi all:
Because me not this functioning the following one query.
simply me not the function respects min, because?, that I am doing badly?
Select Distinct(Min(c.gentime)),
a.CardNumber,a.CardHolderId,a.Deleted,
b.RecordId,b.FirstName,b.LastName,b.Deleted,b.Note 4,
c.param3,c.param2,c.param1,c.recvtime,c.gentime,c. link1,c.link2,c.link3,c.deleted,c.recordid,c.seqid
From Card a,
CardHolder b,
History c
Where ((a.cardholderid = b.recordid)And(b.recordid=c.link3))
And(a.Deleted = 0)And (b.Deleted = 0)And(c.deleted = 0)
And(a.cardnumber Between 1500 And 1600)
And(b.note4 <> 'Mantenimiento')
And(c.RecvTime >= CONVERT(DATETIME, '2006-10-01 00:00:00', 102))And(c.RecvTime <= CONVERT(DATETIME, '2006-10-12 23:59:59', 102))
And(c.Link1=10)
Group By a.CardNumber, a.CardHolderID, a.Deleted,
b.RecordID, b.Deleted, b.FirstName, b.LastName, b.Note4,
c.Deleted, c.RecvTime, c.GenTime, c.Param1, c.Param2, c.Param3, c.Link1, c.Link2, c.Link3, c.Link4,c.recordid,c.seqid
Order By a.CardNumber,c.recvtime
Thanks.:confused:
hi..why this SP is not working that giving me error like
Server: Msg 2714, Level 16, State 1, Procedure test_E, Line 12
There is already an object named '#emp' in the database.
my one of the developer used this every where... what should i do if i dont wanna to change any of the code...i wanna some how work this SP...
create proc test_E
as
select * into #emp
from (select * from emp) p
select * from #emp
drop table #emp
select * into #emp
from (select * from dept) p
select * from #emp
drop table #emp
T.I.A
Papillon
select replace(local_notes,char(13),' ') from locals
Not Working ......
declare @table table(ad_num varchar(20), ad_str1 varchar(20))
insert @table
select '20', '20 apple avenue' union all
select '20', 'apple avenue'
select * from @table
if (select * from @table where substring(ad_str1, 1, 1) like '[0-9]'))
print 'address starts with a number'
else
print 'address starts with a letter'
i want to write a code that prints a msg if the string starts with a number else print another msg.
In SQL2000 Enterprise manager, there is always an indication of WHICH server & database an object is opened from when it has focus.
So when I'm working on the same table in test and production servers I can tell at a glance what it belongs to.
I cannot seem to duplicate this in any way in SQL Manager 2005 Express which could lead to all sorts of trouble and really slows me down.
Have I missed something really simple in setup or use of the product?
TIA,
Richard
Dear All,
please explain me what is going inside with this query....
selectchar(94 * RAND() + 33)
i saw this in FAQ, combining several same queries to generate random passwords.
i didn't get what is char(94* rand()+33)
thank you very much for your valuble time
Vinod
Even you learn 1%, Learn it with 100% confidence.
Hi,
can i anybody help the below query for the o/p
function:date_format(getdate(),'mmm-yy') which will return FEB-08
when iam querying the below statement data is not getting fetching .can anybody correcy it??
select * from
Rev_fbp_posted_dim_tb_tmp2
where dbo.Date_Format(fb_voucher_date,'MMM-YY') between NOV-07' and 'DEC-07'
I would like to get the average of a field but I am not sure if I am doing it correctly.
SELECT dbo.VIEW2.Den AS Den2, CASE WHEN VIEW1.Den = VIEW2.Den THEN 1 ELSE 0 END AS Den3, dbo.VIEW2.ID, AVG(dbo.VIEW2.Den) AS Den4
FROM dbo.VIEW1 CROSS JOIN
dbo.VIEW2
WHERE (dbo.VIEW2.ID = '1')
Here is the error I am getting: Column dbo.View2.Den is invalid in the SELECT list because it is not an aggregate function and there is no Group BY CLause.
Thanks for the help
How can I verify that AWE is actually working? The server is SQL 2000EE on W2KAS with the /pae switch.I've allocated 5000Mb (5Gb) for SQL but Performance monitor says theworking set for the sqlservr process is only 91Mb (it started out ataround 87Mb a couple of days ago and seems to be creeping up)."committed bytes" for the server is about 5.6 Gb out of ~6Gb so there'sa whole pile of memory going somewhere.The error log says "Address Windowing Extensions enabled" (sp_configindicates a "1" for this as well). The "max server memory" item says5000 Mb for its "running" value so within the SQL Server things appearto be correct.The server does seem to be performing better but it's hard to decide ifthat's because of AWE or just the fact that it was rebooted (it hadn'tbeen in a while).- Martin
View 3 Replies View Related