Dynamic Source Table For SSIS Package

Oct 20, 2007

I have created an SSIS package that is designed to move data from SQL Server 2000 to an Access db. I have set the package up to accept four parameters. They are:


the name of the SQL Server Database, which is used in an expression to provide the source connection manager connection string;

the full path to the Access db destination database which is used like #1 above.

the SELECT statement used in an OLE DB Source object to get the data from the source table

the table name which is used by an OLE DB Destination object.
I know that the source and destination tables have exactly the same structure and do not require a transformation.

In order to change variables 3 and 4 from above and have it work, I go through the following steps:

I change the variables to appropriate values.

Go to the Advanced Editor for the OLE DB Source object and click on "Refresh". This produces an error in the OLE DB Destination object that is something like "Validation error. Data Flow Task: DTS.Pipeline: input column "strRECTYPESUFFIX" (301) has lineage ID 17 that was not previously used in the Data Flow task.

Go to the Advanced Editor for the OLE DB Destination which brings up the "Restore Invalid Column Reference Editor". I mark all the columns that show up with the option to <Delete invalid column reference> and click OK

I then reopen the Advanced Editor for the OLE DB Destination, go to the 'Column Mappings' tab click 'Refresh', then in the upper pane where the input and output columns list appear I right click and choose "Map Items by Matching Names"
At this point I no longer have the error and the package will execute without any problems.

I am doing this so that I can load the SSIS package in VB.NET (2.0) so that I can then set these variables programmatically and then execute the package. The problem is that this actually performs steps 1 and 4 above. 2 and 3 are left out and the package fails miserably.

I have found some information that would be helpful if I could get my hands on the appropriate object. I realize that the data flow component would return VS_NEEDSNEWMETADATA from the Validate method, and that could be repaired with the ReinitializeMetaData method of the data flow component ( I assume that is the object to be using in this case). But I do not know how to grab the "Data Flow Component" as an object based upon the "Package" object I have loaded so that I can check if it is valid and manipulate it if necessary.


Thank you in advance for your help.

View 4 Replies


ADVERTISEMENT

Integration Services :: Get Table And Schema Name Of Source And Destination In SSIS Package

Oct 6, 2015

How can I get table name and schema names of the source and destination in ssis package to insert into audit table....??

View 3 Replies View Related

Flat File Source For SSIS Package Don't Have Column In Destination Table: How To Add?

Apr 19, 2007

Hi all,



I am passing flat file source as a variable to Dtexec Utility. (like package.variables[User::varFileName].Value;"D:sourcedata.txt).



Destination table is having one more column.

I want to add custom value in that column at run time by parameter to Dtexec(User::varDate)

I dont know how to do it, please help me.



Madhukar



View 4 Replies View Related

Integration Services :: Any New Record Inserted Or Update In Source Table SSIS Package Automatically Run

Aug 7, 2015

Any new record inserted or update in source table SSIS package automatically run, how can we achieve without using service broker.

View 7 Replies View Related

SSIS - Excel Source Dynamic

Jan 2, 2008

Dear Friends,
I currently have my excel source dynamic for the connectionstring. Using a global variable with the filename and using the expressions of this control to dynamically have the connecttionstring. My problem is that i need tto read always the first workseet and the name changes frequently and generates an erro in SSIS.
how can I set the excel source to goes only for the first sheet independently of the worksheet name?!
Regards!!

View 5 Replies View Related

Integration Services :: Dynamic SIS Package Changing Source Connection At Run Time

Jul 30, 2015

I am in between of creating a dynamic SSSIS package which will run for multiple zones having different source connection.My source is in Oracle.I am having 3 DFT with the 3 different source tables.I want to create a package with above DFT dynamically so that my single package can run for the entire zone with dynamically source connection change.I have created a Master table which stores the zone source connection string and zone name. I have 2 different connection.so if in future any new zones come so only newly zone details need to be add in master table without opening the package.

View 3 Replies View Related

Dynamic File Name For Flatfile Source In SSIS

Apr 11, 2008

I have CSV file as source for SSIS package every time the filename will be changing like trd_1990M1_1990M12.csv,trd_1991M1_1991M12.csv , trd_1992M1_1992M12.csv etc.,

so it will vary as per user selection . i need to run the same SSIS package to execute the different file name with the same structure.


Please let me know the solution for that how to pass the file name dynamically to SSIS package.

View 1 Replies View Related

How To Pass Filename As A Dynamic Variable To Flat File Source In SSIS ?

Sep 3, 2007

Hi,

I am migrating one of my DTS package to SSIS.

My task is to read the filename from a database table and transfer the flat file data in to a table.
In SSIS,I am able to fetch the file name using a Data Reader Source; but how to pass this fileName parameter to Flat File Source ?

In DTS I have used ActiveX script to pass filename variable as flatfilecon.Source.
Any help ?

Thanks,
Ravi

View 4 Replies View Related

Pass Dynamic Value To SSIS Package

Jun 6, 2013

I have an SSIS package that has a variable called @RUN_DATE.I would like to create a sql agent job and uses the set values tab to pass a dynamic parameter to the ssis package. for example, i would like to always set the variable to the last day of the previous month. I know that If i hardcode the date as 5-31-2013 it works fine, but i have not been able to figure out how to make the value dynamic by using an expression or if this is even possible.

View 4 Replies View Related

Report With Ssis Package As Source

Sep 3, 2007

The report having SSIS package as source works fine on my local 32 bit windows xp machine from Report Manager. But same doesn't work from 64bit windows 2003 machine... fails with below error... what could be an issue?


An error has occurred during report processing.





Cannot create a connection to data source 'DataSource1'.


is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)










The same works fine when previewed from visual studio on 64 bit machine.

Thanks
Mahesh







View 6 Replies View Related

Dynamic Table Name In Parameterized Ole Db Source Query?

Sep 11, 2006

hi everyone,

joy mundy alluded in her webcast that it is possible to dynamically specify a table name in a parameterized ole db source query. is this true? if so, how can it be done?

View 6 Replies View Related

Pass Dynamic Date Value To SSIS Package

Jun 14, 2007

Hi,

I have a parent package which accepts date as input. I can configure Set Values of Execute Package Utility with hard coded date value and it works fine. My question is how do I configure Set Values to accept dynamic date value or current date value (may be using GetDate()) ?



Thanks in advance.

Prabha

View 6 Replies View Related

Using SSIS Package To Delete Source Files

Jan 31, 2013

is it possible to delete a source file(*.txt) when a SSIS package is done with it?

View 3 Replies View Related

Using SSIS Package As Source For Reporting Services

Apr 9, 2006

Hi

I have created an SSIS Package which provides Data to a DataReaderDestination. Next I have uncommented SSIS support in rsreportserver.config and rsreportdesigner.config

After that I have set up a shared Datasource in ReportServer and created a Report using that DS of type SSIS.

/FILE D:ETLReportingDataService.dtsx

When trying to see the report using http://localhost/reports I get a message that tells me that the package fails to execute. It does so well when debugging, so my guess is that there is some security issue.

It also does not work in preview dialog in VS. The error message there is "Cannot read the next data row for the data set dsSSIS. Object refernece not set to an instance of an obj.

I haved tried several sec. config-scenarios for the shared datasource. No change

I am using sql 2005 std, march sp1 ctp

Does anyone have a clue what could be the cause of my problem

Thaks in Advance

Alex

View 2 Replies View Related

Dynamic PIVOT Table As Data Source View

May 29, 2008

I would like to use a dynamic pivot table in my data source view. It seems that a named query can be only one sql statement. So, I cannot use my multi-statement procedure that creates a dynamic pivot table output.

What is the best course of action here? I could hard-code my pivot table query. I could maintain a redundant table in the pivot format. Do I have any good options?

KenS


Ken

View 1 Replies View Related

Dynamic OLE DB Table Source From Variable Not Seeing Input Columns

Dec 12, 2007

I am building an SSIS package that loops through a table in SQL Server and dynamically builds a select statement that i would like to use as an ole db source. I have been having a difficult time with this as the select statement that i am generating is over 200,000 characters long so using an sql variable is out of the question.

I ended up placing the select statement into a table where each row of the table represents a piece of the select. I then use an execute_sql task that selects the entire rowset from this table into a variable object. I then use a for each loop to shred the variable and concatenate it into on big string variable called user:: sql_statement that is my select.

After setting up the loop and testing to see if the user:: sql_statement variable populates correctly i then added a data flow transfer with an ole db source and destination. I then go into the advanced editor for the source and set it to accept an sql statement from a variable and use my user:: sql_statement variable. I was forced to set validate external metadata option to false to avoid an error since there is no way to validate the columns until the for each loop runs during run time.

Now thats all fine and good but what is causing my problem is that during run time, when the package gets to the data flow task, the select statement doesn't seem to be populating the input columns of the data source. I have been searching to no avail on a way to tell the data source to update the input columns but every time it gets there, the package bombs out telling me the ole db source has no available output columns.

Specifically the error i get is :
[DTS.Pipeline] Error: "output "OLE DB Source Output" (6616)" contains no output columns. An asynchronous output must contain output columns.

Any help with this would be much appreciated.

View 18 Replies View Related

SQL 2012 :: SSIS Package - How To Get Dynamic Date Files From FTP

Nov 11, 2014

I am working on FTP TASK in SSIS Package. i have to get files from FTP that file names are like 20141110.txt. i want to download any particular date file from ftp. How to i set expression in Remote path?

View 3 Replies View Related

How To Convert Dynamic Properties To SSIS Package Config?

Mar 27, 2006

I'm currently trying to convert over packages from SQL 2000 to SQL 2005. The biggest obstacle at the start has to do with converting my "Dynamic Properties" control. I use it to read an .ini file and load the user name and password to my connections. With 2000 it's nice and easy 1 file 3 lines. While trying to convert it I€™ve had nothing but problems. I've tried the Registry Entry but it forces everything into the Current User and I can't use that I need local machine. There is no documentation and I can't have a xml file with 1000 different username and password settings because 1 person has to update that file with the new passwords. Any help would be GREATLY appreciated.



Thank You

Jerry

View 23 Replies View Related

Runing The Same SSIS Package Using Updated Data Source

Dec 14, 2007

hi,


I created a SSIS package. It imports data from a flat file and then transfer to different data types and load it into destination table. I use look up transformation. Actually before I created final table, I created another intermediate data table for references.
Now I get a new source file once in a month. Then I'm supposed to connect new file and run the package. only difference in new source file is the data not data type. But when I connect the new flat file, package does not work. first one and fifth one are red when I run the package.
Can anyone help me to fix this?

Thanks

p/s;

I get the following error messages in execution result page.

[Lookup 5 [541]] Error: Row yielded no match during lookup.



[Lookup 5 [541]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "component "Lookup 5" (541)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (543)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.



[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Lookup 5" (541) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.

[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.


[Flat File Source [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.


[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.

View 1 Replies View Related

Data Flow Source For MS Access In SSIS Package

Jul 26, 2006

Hi all...

I'm creating a SSIS in the designer view of SQL Server BI Dev. Studio (SQL Server 2005)

I need to import a whole table from MS Access into my local SQL Server.(this task will be performed weekly, so once working I'll schedule a job for it)

I've created a 'FILE' connection to MS Access in the 'Connection Managers'.

When I'm on the 'Data Flow' tab I can't find a Data Flow Item to use as a MS Access connection.
(available on the 'Data Flow Sources' are only: DataReader, Excel, Flat File, OLE DB, Raw File and XML Sources)

What am I doing wrong/missing?

Thanks for your help.

View 4 Replies View Related

SSRS Calling SSIS Package As A Data Source

Feb 12, 2008

Hi All,

It's been a while since I post here. Anyway, I'm trying to call a SSIS package as my data source for SQL reporting service but I keep getting the error "Cannot create a connection to data source 'DsSSIS'.

My DsSSIS consists of the following in the connection string.

="/file c:FarmBillTesting.dtsx /Set Package.Variables[User::FilterValue].Properties[Value];" & Parameters!FilterValue.Value.ToString()


I have tried everything that I know to make this work but I have been able to do so. Any help from the group would be great.


Thanks

Ham

View 11 Replies View Related

Integration Services :: Dynamic Mapping From XML Source To Destination Table

Jun 1, 2015

I have a requirement to take xml file, in case the number of column changes, it should not fail the package, rather it should load the data in destination table. Destination table could be altered separately depending on xml schema by the DB team in production.

View 3 Replies View Related

USING BI Studio How To Create Dynamic Connection String In SSIS Package

Jun 19, 2006

Hi



I need help for Connection string:



Requirement: When we create SSIS Pacakge using Businessinteligence studio.Each Source and Destination or whatever we using the Control required DB Connection.

we connect theDB server and Database Table through manaully .Instead of Manual i need dynamic Global varible for Connection String .How to achieve this connection string.

because suppose we create SSIS Package in Developement Server Latter We change the Server from Developement to Another Testing Server . at that time we dont requierd for changing manulay.any one pls reply me.



Same as in Dotnet we give configiration XML file .we gave the Connection strng. how to in SSIS we do?



Thanks & Regards

M.Jeyakumar







View 9 Replies View Related

Integration Services :: Dynamic Column Mapping In SSIS Package

Nov 2, 2015

I have some source files is there today it will have 4 columns..Tomorrow it will have 10 columns...my package is dynamically load the data to destination table..How we have do it in Using script task...

View 4 Replies View Related

Parameterize SSIS Package To Identify A Source File Location

Oct 24, 2007

Hi All,


I created a SSIS package to extract data from a flat file source and load them into a table in a data base. After I created the package i checked it in to source control(perforce).

But the problem is once a month new flat source file comes and data should be updated.
Once the new flat file comes, is there anyway that SSIS package can identify the path of the flat file and execute the package automatically? In Flat file source only the data will be changed. Not location or data type or anything.
Can i use parameters to do that?


Thanks

View 6 Replies View Related

Integration Services :: Automating SSIS Package For Different Source File

Sep 22, 2015

I want to design an SSIS package that loads data from files into SQL Server and I want to automate the process. My major issue is that the source file doesnt come in the same format. Some times I comes in either .csv , .xls , .txt or even .rpt file format. Is there a way I can write a code that checks through my folder and based on the available format on the folder it loads the value in ssis.

View 2 Replies View Related

T-SQL (SS2K8) :: Extracting Source / Dest Column Details From SSIS Package Files?

Jun 30, 2015

We have several hundred very simple ETL SSIS 2K8 package files (*.dtsx).

I'd like to be able to interrogate them to determine source and destination fields.

There's no great need to map source to dest or to extract data types.

So far, the most promising candidate is to load them using OPENROWSET into an XML field in a SS table.No problem there, but querying using OPENXML has me stumped.

The package files will change a couple of times per year, so the process needs to be repeatable with minimal manual intervention.

View 3 Replies View Related

SSIS - DataFlowTask - Excel Source - Dynamic Excel Template

Mar 13, 2008



Hi,

I am creating an SSIS package witha a Dataflow task, which reads from an Excel source and then uses script component to dumpt the data to multiple tables in Sql Server database

I need to some how make my Excel source dynamic, that is my excel template which i would be using to map the excel columns to script component's input columns would be dynamic..

In other words, I should be able to define the Excel Source, Column Mapping Information, Precedence constraint to the Script component dynamically

Please suggest how could i accomplish this


Regards,
Kalyan

View 8 Replies View Related

Create Package For Multiple Table Insert From Flat File Source

Feb 23, 2008



Hello Guys,

I am working in one company and currently I am assigned to new project for Data Migration from company X to our company Y using SSIS. I am totally new and i just completed 5 tutorial which was gien on MSDN website.

Basically client is going to send us first flat file with 1 million records with Header, Detail and Trailer records.
I want to create a Package in such a way that it dumps all this first load into 7 to 8 different tables at a time.
we also have to include functionlity for validation and error check.
On successfull load error file should only return Header and Trailer but no detail records.
If there are any errors then error file should contain Header, Detail records which were unable to load plus trailer which we have to sent back to client.

When 2nd file comes that time we have to check whether this is new records or change (update) one depending on Flag which tells it.


This is basically high level idea of my Package what i need to create. If u guys have any question then let me know.

I know you guys are very experienced one. Anyone of you please give me some detail idea on it I would really appricate it.
I have very limited time line for it.

Thanks

Shah

View 4 Replies View Related

SSIS Source Table/Row Locking

Feb 8, 2008



Hi all,
We have an SSIS package which runs for around 30 min and it does a lot of things, now whenever this SSIS Package is run it is suspected that it is locing the table or records from the DB which it is reading the records, and indeed that system is having some fault that it is never able to remove that lock unless the DB restarts. In this source we only have a SQL Command and not a Table selected. Have anyone come across this problem? Any answers will be of great help.

View 2 Replies View Related

Passing A Table Programmatically To Datareader Source Component In Ssis

Feb 26, 2007

Hi There,

I am loading/executing packages from c# and I need to populate a temp table from user input and pass this table as a variable to the datareader source components sql command. I am using expression to build this query, but I am getting design time error when I have this command..

"select id, (SysDate + 28) as ExpiresDate from Table1 where id in (Select Id from" +@[User::Table2]+")"..

I have declared Table2 as a variable of type Object and I am creating Table2 in C# and I am assigning that Table to the user Table. But in the design mode, I am getting an error...expression cannot be evaluated.

Can anybody please tell me when I cannot do this?

Thanks,



View 3 Replies View Related

Dynamic Source And Dynamic Destination

Apr 15, 2008

I have a requirment which i have partly accomplished , but could not get through completely

i have a file which comes in a standard format ending with date and seq number ,

suppose , the file name is abc_yyyymmdd_01 , for first copy , if it is copied more then once the sequence number changes to 02 and 03 and keep going on .

then i need to transform those in to new file comma delimited destination file with a name abc_yyyymmdd,txt and others counting file counting record abc_count_yyyymmdd.txt. and move it to a designated folder. and the source file is then moved to archived folder


what i have taken apprach is

script task select source file --------------------> data flow task------------------------------------------> script task to destination file

dataflow task -------------------------> does count and copy in delimited format



what is happening here is i can accomlish a regular source file convert it to delimited destination file --------> and move it to destination folder with script task .

but cannot work the dynamic pick of a source file.


please advise with your comments or solution you have

View 14 Replies View Related

Can I Use And Excel Doc Saved In An SQL Server Table In An Image Type As A Source For An SSIS Script?

Aug 10, 2007

Hi Folks,

My situation is that Excel files are to be downloaded into a SQL Server 2005 table (perhaps as type image or nvarchar), which serves as a document repository. From there, they should be converted to XML. Use of an NT file directory is strongly discouraged. I would like to have SSIS read the Excel from one field in a table and then write the XML into another field in the same (or perhaps another) table. Is this possible? If not, is the a strait-forward way to do this?

Also, I€™m hoping to invoke the SSIS script from a SQL Server INSERT trigger so the conversion is done during the INSERT.

Thanks,
Rob

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved