Dynamic WHERE Clauses
May 27, 2008
Here is another project that seams to be the same as my previous post but a little simpler. http://forums.asp.net/t/1263330.aspx
My Item_Category table is self referencing. I have a list of category Ids in a particular order representing the tree of categories from the current category to the top. For example: 1 - Fasteners, 4 - Screws, 12 - Sheet Metal Screws or the reverse.
I need to translate this so I can bind a cookie crumb type control to it. ie. Fasteners > Screws > Sheet Metal ScrewsI originally accomplished this like so;
Dim q = From ic In itemdc.Item_Category _
Where valueId.Contains(ic.Item_Category_Id) _
Select Id = ic.Item_Category_Id, ic.Name But found that this does not order them properly. Remember that the list of Ids is in a particular order. I need a query to result to the below. I was using a horizontal DataList control as the cookie crumb control. Again, I am trying to do this with Linq to Sql without using Stored Procedures even though I am the DBA as well. Or is there some other better way to do this?
Id
Name
Sort
1
Fastener
1
4
Screws
2
12
Sheet Metal Screws
3
Finally, as I mentioned in my previous post, I accomplished this concept with a stored procedure but then the asp.net controls could not recognize the schema, hence I could not bind the controls to the data source control.
View 2 Replies
ADVERTISEMENT
May 19, 2008
So how do you do dynamic WHERE clauses with asp.net?
I have a QueryString parameter with a value that will look like this. |1| or |1||2| or |1||2||3| or etc. For each number in the value I want to add an EXISTS function to the WHERE clause. I have accomplished this in T-SQL. But I can't figure out how to bind asp.net control to it. It gives me 'Invalid syntax near the keyword 'ORDER'. I know this has something to do with .net not being able to exaluate the schema properly.
So I tried Linq to Sql. Well, so happens that my WHERE clause is pointing to the existance of records in another table which the default install of Linq to Sql doesn't seam to support. I came across this post (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2979081&SiteID=1) that explains how to dynamically query across multiple tables. I tried this and got errors when trying to plug in the additional code. And this still does not let me dynamically add where clauses.
I tried the who Predicate thing and ran into the same problem where I can't reference the existance of values in foreign tables.
Here is my sproc. Can anyone tell me how to get this into a asp.net environment. I also do NOT want to auto-generate fields in my GridView.ALTER PROCEDURE dbo.Item_SelectByFilters @Item_Category_Id int = NULL, @ItemSpecificValueIdList varchar(100) = NULL, @debug bit = 0 AS DECLARE @sql nvarchar(4000), @paramlist nvarchar(4000) SELECT @sql = 'SELECT Item_Id, Number, Primary_Item_Category_Id, Secondary_Item_Category_Id, Engineering_Document_Id, CategoryIdList FROM Item WHERE (1 = 1)' IF @Item_Category_Id IS NOT NULL SELECT @sql = @sql + ' AND Item.CategoryIdList Like ''|'' + CONVERT(varchar, (@xItem_Category_Id) + ''|''' IF @ItemSpecificValueIdList IS NOT NULL BEGIN WHILE @ItemSpecificValueIdList <> '' BEGIN DECLARE @StartLocation int SELECT @StartLocation = CHARINDEX('-', @ItemSpecificValueIdList, 1) IF @StartLocation <> 0 BEGIN DECLARE @EndLocation int SELECT @EndLocation = CHARINDEX('|', @ItemSpecificValueIdList, @StartLocation + 1) IF @EndLocation <> 0 BEGIN DECLARE @ValueLength int SELECT @ValueLength = @EndLocation - @StartLocation - 1 DECLARE @ValueBetween varchar(10) SELECT @ValueBetween = SUBSTRING(@ItemSpecificValueIdList, @StartLocation + 1, @ValueLength) IF @ValueBetween IS NOT NULL SELECT @sql = @sql + ' AND EXISTS(SELECT Item_Specific_Value_Id FROM Item_Specific_Value WHERE Item_Id = Item.Item_Id AND Item_Specific_Value.Item_Specific_Value_Id = ' + @ValueBetween + ')' END END SET @ItemSpecificValueIdList = SUBSTRING(@ItemSpecificValueIdList, @EndLocation + 1, len(@ItemSpecificValueIdList) - @EndLocation) END END SELECT @sql = @sql + ' ORDER BY Item.Number' IF @debug = 1 PRINT @sql SELECT @paramlist = '@xItem_Category_Id int'
EXEC sp_executesql @sql, @paramlist, @Item_Category_Id
View 20 Replies
View Related
Feb 17, 2008
Hi, I hope some one can help me. I have a stored procedure (Microsoft SQL 2005 Express Edition) that I want users to be able to dynamically set the, group by, order by (@orderby) and where clause (@where). I have managed to get the group by to work but can't seem to get the where and order by to work. Here's my stored procedure. Any idea how this can be done? ALTER PROCEDURE [dbo].[sp_aggregate] -- Add the parameters for the stored procedure here @finfileid int, @phaseid int, @supplierid int, @measurementid int, @roleid int, @groupby int, @orderby int, @where int AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; -- Insert statements for procedure here SELECT MAX(ProjectFinFileMonthItems.ProjFinFileMonthItemsMonthId) AS ProjFinFileMonthItemsMonthId, SUM(ProjectFinFileMonthItems.ProjFinFileMonthItemsValue * ProjectFinFileMonthItems.ProjFinFileMonthItemsRate * ProjectFinFileMonthItems.ProjFinFileMonthItemsAvail / 100) AS total, MAX(ProjectFinFileItems.ProjPhaseId) AS phaseid, MAX(ProjectFinFileMonthItems.ProjDeliveId) AS deliveid, MAX(ProjectFinFileMonthItems.SupplierId) AS supplierid, MAX(ProjectFinFileMonthItems.ProjFinFileItemsId) AS ProjFinFileItemsId, MAX(ProjectFinFileMonthItems.ProjFinFileMonthItemsId) AS ProjFinFileMonthItemsId, MAX(ProjectFinFileMonthItems.ProjDeliveId) AS ProjDeliveId, MAX(ProjectPhases.ProjectPhaseName) AS ProjectPhaseName, MAX(Suppliers.SupplierName) AS SupplierName, MAX(ProjectFinFileMonthItems.RoleId) AS RoleId, MAX(Measurements.MeasurementName) AS MeasurementName, MAX(ProjectFinFileMonthItems.MeasurementId) AS MeasurementId, MAX(ProjectFinFileMonthItems.FinDataTypeId) AS FinDataTypeId, MAX(FinDataTypes.FinDataTypeName) AS FinDataTypeName, max(ProjectFinFileItems.FinFileId) as finfileid FROM ProjectFinFileItems INNER JOIN ProjectFinFileMonthItems ON ProjectFinFileItems.ProjFinFileItemsId = ProjectFinFileMonthItems.ProjFinFileItemsId LEFT OUTER JOIN FinDataTypes ON ProjectFinFileMonthItems.FinDataTypeId = FinDataTypes.FinDataTypeId LEFT OUTER JOIN Measurements ON ProjectFinFileMonthItems.MeasurementId = Measurements.MeasurementId LEFT OUTER JOIN Roles ON ProjectFinFileMonthItems.RoleId = Roles.RoleId LEFT OUTER JOIN ProjectPhases ON ProjectFinFileItems.ProjPhaseId = ProjectPhases.ProjectPhaseId LEFT OUTER JOIN Suppliers ON ProjectFinFileMonthItems.SupplierId = Suppliers.SupplierId /*dynamic where clause needs to go here */ /*dynamic group by clause */ GROUP BY CASE when @groupby=1 then ProjectFinFileItems.projphaseid --phaseid when @groupby=2 then ProjectFinFileMonthItems.supplierid -- supplierid when @groupby=3 then ProjectFinFileMonthItems.measurementid -- measurment when @groupby=4 then ProjectFinFileMonthItems.roleid --role else ProjectFinFileMonthItems.ProjFinFileMonthItemsId END /*dynamic order clause needs to go here */ END cheers Mark :)
View 2 Replies
View Related
Feb 23, 2006
I'm importing a text field that is called advertiserTYPE. It will be one of four options in the parenthesis below:
advertiserTYPE (FSBO,BROKER,DEVELOPER,REALTOR) VarChar(50)
I need to be able to construct a statement that says something like:
If advertiserTYPE = FSBO
Then INSERT INTO [COLUMN1]
If advertiserTYPE = BROKER
Then INSERT INTO [COLUMN2
If advertiserTYPE = DEVELOPER
Then INSERT INTO [COLUMN3]
Am I on the right track??
View 8 Replies
View Related
Feb 21, 2007
Hello helpful people :)
I have this sproc.
ALTER PROCEDURE dbo.cis_UpdateCourseUserWithGrade
@Grade nvarchar,
@UaaStudentId nchar,
@CourseId int
AS
UPDATE cis_CourseUser
SET Grade =@Grade
WHERE UaaStudentId = @UaaStudentId
AND WHERE CourseID = @CourseId
RETURN
the ANE WHERE isn't much liked. How can I update the field with the grade where both of the conditions are true? I'm getting an invalid syntax near @UaaStudentId
Thanks.
View 4 Replies
View Related
Apr 29, 2008
I've seen lots of entries recommending the use of ISNULL in SQL WHERE clauses, e.g. in a search sproc where users can enter some or all parameters to search a table. Previously I would have used something like:SELECT * FROM MyTableWHERE (FName = @fname OR @fname IS NULL) AND(MName = @mname OR @mname IS NULL) AND(LName = @lname OR @lname IS NULL)So using the neat ISNULL syntax it could be updated to:SELECT * FROM MyTableWHERE (FName = ISNULL(@fname, FName)) AND(MName = ISNULL(@mname, MName)) AND(LName = ISNULL(@lname, LName))Having played around with this I stumbled upon a problem. If one of the fields, e.g. MName, is NULL then that clause will return false since MName = NULL isn't true and you have to use MName IS NULL. Did I miss all the caveats with using ISNULL in this way on fields that can contain NULL or have I missed something else?
View 4 Replies
View Related
Oct 28, 2014
I have an existing SPROC which works the way it should do and was difficult to construct. But now I need to add 1 more condition and hopefully that should be it however I am struggling how to do this. Here is a snip of the existing SPROC.
quote:
IF @columnName = 'Rating - Fire' OR @columnName = 'Rating - PPE' OR @columnName = 'Rating - Reactivity' OR @columnName = 'Rating - Health'
BEGIN
SELECT @totalRecords = (SELECT COUNT(p.[SID]) FROM S_Summary p INNER JOIN S_Detail detail ON detail.SID = p.SID
WHERE
CASE @columnName
[code]...
so this works fine but now I need to add 1 more thing..if a new parameter is supplied (lets call it @stringBranch), then I want to join another table and also match the param value to a field in that table along with any existing WHERE conditions being applied to this:
quote:
WHERE (@columnName IS NULL AND @columnValue IS NULL)
OR
CASE @columnName
WHEN 'Rating - Fire' THEN detail.F
WHEN 'Rating - PPE' THEN detail.P
[code]...
View 9 Replies
View Related
Feb 23, 2006
I'm trying to use multiple where clauses but its not working. I want it to look something like this:
INSERT INTO [USCondex_Development].[dbo].[miamiheraldExceptions]([InvalidEmails], [InvalidAdPrintID], [InvalidPropertyStreetAddress], [InvalidPropertyPrice])
SELECT [AdvertiserEmail],[AdPrintId],[AdvertiserAddress], [PropertyPrice]
FROM [Development].[dbo].[table2]
WHERE advertiseremail is NULL
and WHERE adPrintID is NULL
and WHERE firstinsertdate is NOT NULL
and WHERE propertystreetaddress is NOT NULL
and WHERE propertyprice < 100
But it's not working.
View 7 Replies
View Related
Nov 28, 2007
I am trying to wrap my WHERE clause with an IF or a CASE but cannot seem to get it to work. This is what I am trying:
WHERE
CASE
WHEN EVENT_TYPE='d' THEN
(link_inc.incident_id = 10000005) AND (B.incident_id <> 10000005) AND link_rsn.link_rsn_sc = 'CHANGE' AND B.incident_id > 10000000
ELSE
(link_inc.incident_id = 10000005) AND (B.incident_id <> 10000005) AND link_rsn.link_rsn_sc = 'CHANGE' AND B.incident_id > 10000000 AND act_type.act_type_sc <> 'CLOSURE'
END
ORDER BY B.incident_id DESC, act_reg.act_reg_id DESC
Basically I want to run a different WHERE clause based on a value (EVENT_TYPE). The error message I am getting is:
Incorrect syntax near '='.
View 5 Replies
View Related
Apr 11, 2007
I have a table, basically consisting of products and their prices. I want to select some products, then sort them by price in ascending order BUT putting prices of zero at the bottom. (e.g. 5.99, 8.99, 10.99, 0.00, 0.00)I thought I'd be able to do something like:ORDER BY (price != 0), pricethinking that it would sort rows according to whether the condition was true or not, and then by price, but MSSQL doesn't seem to allow this. should this work, or is there another way around this? One solution would be to load the values into a table object and sort them using that, but I'd rather do all of this in SQL if possible, for speed.any suggestions?thanks!
View 1 Replies
View Related
Dec 4, 2007
If I have a table called "content_hits_tbl" and want to pull information, can't i write something like this:
SELECT COUNT(visitor_id) AS HITS, COUNT(DISTINCT visitor_id) AS VISITORS, COUNT(DISTINCT visitor_id) WHERE visit_type = 0 AS NEW, COUNT(DISTINCT visitor_id) WHERE visit_type = 1 AS RETURNING
FROM content_hits_tbl
Can't you have multiple WHERE clauses in the SELECT statement?
Any suggestions would be great. I have been wrestling with it and SQL queries arent my strong area ...
I'm using VS05 connecting to a SQL database.
Sincerely,
Tommy
View 3 Replies
View Related
Sep 18, 2014
Below is a script that count the amount of Void properties we had in a specific month.
SELECT COUNT(C.[Place Referance]) AS [April Total Voids]
FROM
(
SELECT DISTINCTTOP 100 PERCENT
HIST.[PLACE-REF] AS 'Place Referance'
[Code] ....
It tells me I have 53 total voids.
What I also want is a column next to this to say how many of those voids back in April are STILL Void.
So basically the WHERE clause would still be the same -
WHERE [Void Start Date YEAR] = '2014'
AND [Void Start Date MONTH] = '4'
but with the added -
AND HIST.[END-DATE] IS NULL
So ideally I'm after two columns with figures in them and then going forward I can then calculate other months as well.
View 5 Replies
View Related
Aug 1, 2013
I have a Master table with a OrderNbr which is also contained in the Detail table.
It's a 1 to Many relationship, respectively.
I want to update the MASTER.FinalizedDate using a "select top 1 FinalizedDate order by FinalizedDate DESC" from the Detail table but the clause is ALL the Status have to be "F". So OrderNbr 12345 should not get updated because it contains a 'O'. OrderNbr 67899 should get updated in the Master table to 2/26/2013 because all have a 'F' and the last date to post is the official finalized date.
Here is what I came up with.......so far, but not sure how to work in the Status piece on 1 to M.
The rub here is that even if one row has the 'O' status I want to ignore the update. If all have the 'F' then I want the udpate to happen.
Update MASTER
Set FinalizedDate = (select top 1 d.FinazliedDate from Detail d
where m.OrderNbr = d.OrderNbr
and d.Status not in ('O')
Order by FinalizedDate DESC)
From MASTER m
How do I not include all 3 rows for OrderNbr 12345 because one row has the Status "O" in the DETAIL table?
Here are the table looks........
MASTER
OrderNbr Ytotals Ztotals Xtotals Finalized Date
12345$1,500$1,500$1,200
67899$1,200$1,100$900
DETAIL
OrderNbrItemNbr PriceStatusFinalized Date
1234563453453 $1,400F1/2/2013
12345554444 $1,500F1/2/2013
12345545444 $2,200O NULL
67899333334 $899F2/24/2013
678993434344 $659F2/24/2013
67899434676 $499F2/26/2013
6789978888 $599F2/24/2013
View 3 Replies
View Related
May 2, 2008
hai,
i'm using a table in sql.the name of register. the table datas are
FirstName LastName UserName Pwd dob
krishna murthy ckm0006 asdfg 1985-04-01 00:00:00.000
krishna dfgd ckm0006 cxbcv 1985-05-01 00:00:00.000
raja fdd ddd ddd 1985-01-01 00:00:00.000
raja hgff fgrgf fgf 1985-02-01 00:00:00.000
i want the result as:[group by or distinct by FirstName && order by dob]
FirstName LastName UserName Pwd dob
krishna dfgd ckm0006 cxbcv 1985-05-01 00:00:00.000
raja hgff fgrgf fgf 1985-02-01 00:00:00.000
i tried many queries i'm getting error Like this
Column 'register.LastName' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
can anyone resolve my problem...
View 5 Replies
View Related
Jan 14, 2008
Howdy folks, first time poster.
In a UDF, how is the best way to extend a query with additional clauses based on expressions? The user input here is used to refine the basic query by introducing additional clauses. Is there something like the following?
-- The basic query
SELECT column
FROM table
WHERE clause
-- Additional clause, only appended to query
-- if expression evaluates to true
IF @parameter <> default_value
BEGIN
AND additional_clause
END
Right now I'm using CASE like the following, but it necessarily makes the query longer. Is there a more efficient way?
-- The basic query
SELECT column
FROM table
WHERE clause
-- Additional clause, should only effect result
-- set when the parameter is not default_value
AND table.column =
CASE @parameter
WHEN default_value THEN
-- identity, table.column=table.column,
-- should have no effect other than just a long query
table.column
ELSE
@parameter
END
View 8 Replies
View Related
Jan 12, 2008
Hi
I'm not sure if I have stated my subject line correctly for what I want to achieve, but I will attempt to explain it below.
In addition to what I have in my script below, I also need to include the following clauses:
1. where TransPerPaySequence.FinancialYTDCode like '2007', and e.EmployeeStatusCode like 'CASUAL' and p.PositionGroupCode like 'AC', then instead of using the divisor of 72, it needs to be 35; and
2. where TransPerPaySequence.FinancialYTDCode like '2008', and e.EmployeeStatusCode like 'CASUAL' and p.PositionGroupCode like 'AC', then instead of using the divisor of 72 or 35, it needs to be 31.
I would really appreciate any assistance that can be provided.
Thanks
SELECT DISTINCT
pc.PositionClassificationCode, pc.Description AS positionclass, pg.PositionGroupCode, pg.Description AS positiongroup, p.Description AS position,
e.PreferredName + ' ' + e.LastName AS employeename, SUM(ha.Quantity)
/ ((CASE p2.PositionGroupCode WHEN 'AC' THEN 72 WHEN 'AL' THEN 75 WHEN 'EX' THEN 80 WHEN 'MG' THEN 80 WHEN 'SM' THEN 80 END) *
(SELECT COUNT(DISTINCT PaySequence) AS Expr1
FROM TransPerPaySequence
WHERE (PayPeriodCode LIKE 'EIT') AND (Closed = '1') AND (Description LIKE 'St%'))) AS FTE,
(SELECT COUNT(DISTINCT PaySequence) AS Expr1
FROM TransPerPaySequence AS TransPerPaySequence_1
WHERE (PayPeriodCode LIKE 'EIT') AND (Closed = '1') AND (Description LIKE 'St%')) AS payseq
FROM HistoricalAllowance AS ha LEFT OUTER JOIN
Position AS p ON ha.PositionCode = p.PositionCode LEFT OUTER JOIN
PositionGroup AS pg ON p.PositionGroupCode = pg.PositionGroupCode LEFT OUTER JOIN
PositionClassification AS pc ON p.PositionClassificationCode = pc.PositionClassificationCode LEFT OUTER JOIN
WAP ON ha.WAPCode = WAP.WAPCode LEFT OUTER JOIN
Employee AS e ON ha.EmployeeCode = e.EmployeeCode LEFT OUTER JOIN
Position AS p2 ON e.PositionCode = p2.PositionCode LEFT OUTER JOIN
TransPerPaySequence AS tpps ON ha.PaySequence = tpps.PaySequence
WHERE (e.EmployeeCode IN ('83', '739')) AND (ha.AllowanceCode IN ('005', '201', '203', '101')) AND (tpps.FinancialYTDCode LIKE '2007%')
GROUP BY pc.PositionClassificationCode, pg.PositionGroupCode, pc.Description, pg.Description, p.Description, e.PreferredName, e.LastName,
p2.PositionGroupCode
View 8 Replies
View Related
May 8, 2008
hi, i'm using Access 2007 and i'm trying to join two selects and create two new columns[complete and not complete] where 'x' denotes a hit was made. i will use this later for grouping. here is my code so far. thanks.
SELECT tblOutlookTask.TaskSubject, tblOutlookTask.PercentComplete, tblOutlookTask.ID
FROM tblOutlookTask
WHERE (((tblOutlookTask.PercentComplete)=100))
SELECT tblOutlookTask.TaskSubject, tblOutlookTask.PercentComplete, tblOutlookTask.IDFROM tblOutlookTask
WHERE (((tblOutlookTask.PercentComplete)<>100))
View 3 Replies
View Related
Jun 20, 2001
I have a web page which passes back parameters to a stored procedure.
From the web page the user selects different clauses for the 'where' criteria.
Based upon the number of clause items in the parameters sent back, a select statement is built and executed.
In the stored procedure I have many if statements to chose the correct sql statement.
As the no of clauses in the where statement can vary, it can become messy script.
Has anyone dealt with this scenario. What is the best strategy ?
A simple illustation of this is as follows
A statement with two clauses :-
Select * from Sales where
user = 'John' and country = 'England'
A statement with three clauses :-
Select * from Sales where
user = 'John' and country = 'England' and County = 'Staffordshire'
The stored procedure would except three parameters and would build a string based on the number of actual where clases sent back
View 2 Replies
View Related
Feb 26, 2004
Hi,
I have a complex SQL query against multiple tables that ideally would be best used as a stored procedure.
I know of and have read about creating named parameters and setting the parameters' values in ASP just before issuing an execute command via the Command object. What I'd like to do is assign the text of the filter and sort clauses to the parameters. Not the values, but the entire string, such as
"WHERE lastname LIKE 'A%' "
"ORDER BY lastname "
I need to assign the entire clause because the query may or may not use a particular clause.
I have experimented. However SQL treats the parameter as a literal string rather than part of the SQL query itself. Is there another technique that I may use to accomplish my goal?
Thanks in advance for your opinion, suggestion, criticism, etc.
--Tom.
View 2 Replies
View Related
Jun 18, 2014
I came across this structure today and haven't seen it before:
SELECT blablabla
FROM T1
FULL OUTER JOIN T2 ON
T1.Col1 = T2.Col1
AND T1.Col2 = T2.Col2 ON
T3.Col1 = T1.Col1
AND T3.Col2 = T1.Col2 ON
T4.Col1 = T1.Col1
AND T4.Col2 = T1.Col2
I can follow along until the second "ON".
View 9 Replies
View Related
Nov 28, 2007
Hello,
i've written the following query:
SELECT dbo.KALENDER.KALENDER_ID, dbo.KALENDER.JAHR_BEZ, dbo.KALENDER.JAHR_WERT, dbo.KALENDER.HALBJAHR_WERT,
dbo.KALENDER.HALBJAHR_BEZ1, dbo.KALENDER.HALBJAHR_BEZ2, dbo.KALENDER.QUARTAL_WERT, dbo.KALENDER.QUARTAL_BEZ1,
dbo.KALENDER.QUARTAL_BEZ2, dbo.KALENDER.MONAT_BEZ, dbo.KALENDER.MONAT_WERT, dbo.KALENDER.TAGE_IM_MONAT,
dbo.TAG.KALENDERWOCHE, dbo.TAG.WOCHENTAG, dbo.TAG.TAG, s.STUNDE_ID, s.DATUM_ZEIT
FROM dbo.KALENDER INNER JOIN
dbo.TAG ON dbo.KALENDER.KALENDER_ID = dbo.TAG.KALENDER_ID INNER JOIN
dbo.STUNDE AS s ON dbo.TAG.TAG_ID = s.TAG_ID
WHERE (SELECT MONTH(s.datum_zeit)) = ((SELECT MONTH(GETDATE()))-2)and
(SELECT year(s.datum_zeit)) = (SELECT year(GETDATE()))
order by s.stunde_id
when copying that query to the view editor and executing it, it trys to fix it somehow to:
SELECT TOP (100) PERCENT dbo.KALENDER.KALENDER_ID, dbo.KALENDER.JAHR_BEZ, dbo.KALENDER.JAHR_WERT, dbo.KALENDER.HALBJAHR_WERT,
dbo.KALENDER.HALBJAHR_BEZ1, dbo.KALENDER.HALBJAHR_BEZ2, dbo.KALENDER.QUARTAL_WERT, dbo.KALENDER.QUARTAL_BEZ1,
dbo.KALENDER.QUARTAL_BEZ2, dbo.KALENDER.MONAT_BEZ, dbo.KALENDER.MONAT_WERT, dbo.KALENDER.TAGE_IM_MONAT,
dbo.TAG.KALENDERWOCHE, dbo.TAG.WOCHENTAG, dbo.TAG.TAG, s.STUNDE_ID, s.DATUM_ZEIT
FROM dbo.KALENDER INNER JOIN
dbo.TAG ON dbo.KALENDER.KALENDER_ID = dbo.TAG.KALENDER_ID INNER JOIN
dbo.STUNDE AS s ON dbo.TAG.TAG_ID = s.TAG_ID
WHERE ((SELECT MONTH(s.datum_zeit) AS Expr1
FROM ) =
(SELECT MONTH(GETDATE()) AS Expr1) - 2) AND
((SELECT YEAR(s.datum_zeit) AS Expr1
FROM ) =
(SELECT YEAR(GETDATE()) AS Expr1))
ORDER BY s.STUNDE_ID
... but this causes syntax-errors. I don't understand why this query works fine in the query editor but then gets automatically "destroyed" by the view editor. Do i have to use more statements to get the working query to run inside a view?
Thanks alot for reading.
View 1 Replies
View Related
Aug 25, 2007
Hi Craig/Kamal,
I got your email address from your web cast. I really enjoyed the web cast and found it to be
very informative.
Our company is planning to use SSIS (VS 2005 / SQL Server 2005). I have a quick question
regarding the product. I have looked for the information on the web, but was not able to find
relevant information.
We are getting Source data from two of our client in the form of Excel Sheet. These Excel sheets
Are generated using reporting services. On examining the excel sheet, I found out that the name
Of the columns contain data itself, so the names are not static such as Jan 2007 Sales, Feb 2007 Sales etc etc.
And even the number of columns are not static. It depends upon the range of date selected by the user.
I wanted to know, if there is a way to import Excel sheet using Integration Services by defining the position
Of column, instead of column name and I am not sure if there is a way for me to import excel with dynamic
Number of columns.
Your help in this respect is highly appreciated!
Thanks,
Hi Anthony, I am glad the Web cast was helpful.
Kamal and I have both moved on to other teams in MSFT and I am a little rusty in that area, though in general dynamic numbers of columns in any format is always tricky. I am just assuming its not feasible for you to try and get the source for SSIS a little closer to home, e.g. rather than using Excel output from Reporting Services, use the same/some form of the query/data source that RS is using.
I suggest you post a question on the SSIS forum on MSDN and you should get some good answers.
http://forums.microsoft.com/msdn/showforum.aspx?forumid=80&siteid=1
http://forums.microsoft.com/msdn/showforum.aspx?forumid=80&siteid=1
Thanks
Craig Guyer
SQL Server Reporting Services
View 12 Replies
View Related
Nov 23, 2007
Hi,
I have a need to display on screen AND email a pdf report to email addresses specified at run time, executing the report with a parameter specified by the user. I have looked into data driven subscriptions, but it seems this is based on scheduling. Unfortunately for the majority of the project I will only have access to SQL 2005 Standard Edition (Production system is Enterprise), so I cannot investigate thoroughly.
So, is this possible using data driven subscriptions? Scenario is:
1. User enters parameter used for query, as well as email addresses.
2. Report is generated and displayed on screen.
3. Report is emailed to addresses specified by user.
Any tips on how to get this working?
Thanks
Mark Smith
View 3 Replies
View Related
May 2, 2007
If anyone could confirm...
SQL Server 2000 SP4 to multiple SQL Server 2005 Mobile Edition on PDAs. My DB on SQL2k is published with a single dynamic row filter using host_name() on my 'parent' table and also join filters from parent to child tables. The row filter uses joins to other tables elsewhere that are not published to evaluate what data is allowed through the filter.
E.g. Published parent table that contains suppliers names, etc. while child table is suppliers' products. The filter queries host_name(s) linked to suppliers in unpublished table elsewhere.
First initial sync with snapshot is correct and as I expected - PDA receives only the data from parent (and thus child tables) that matches the row filter for the host_name provided.
However - in my scenario host_name <--> suppliers may later be updated E.g. more suppliers assigned to a PDA for use or vice versa. But when I merge the mobile DB, the new data is not downloaded? Tried re-running snapshot, etc., no change.
Question: I thought the filters would remain dynamic and be applied on each sync?
I run a 'harmless' update on parent table using TSQL e.g. "update table set 'X' = 'X'" and re-sync. Now the new parent records are downloaded - but the child records are not!
Question: I wonder why if parent records are supplied, why not child records?
If I delete existing DB and sync new, I get the updated snapshot and all is well - until more data added back at server...
Any help would be greatly appreciated. Is it possible (or not) to have dynamic filters run during second or subsequent merge?
View 4 Replies
View Related
Mar 9, 2015
I have tried building an Inline TVF, as I assume this is how it would be used on the DB; however, I am receiving the following error on my code, I must be missing a step somewhere, as I've never done this before. I'm lost on how to implement this clr function on my db?
Error:
Msg 156, Level 15, State 1, Procedure clrDynamicPivot, Line 18
Incorrect syntax near the keyword 'external'.
CREATE FUNCTION clrDynamicPivot
(
-- Add the parameters for the function here
@query nvarchar(4000),
@pivotColumn nvarchar(4000),
[code]....
View 1 Replies
View Related
Mar 24, 2007
I have a Stored Procedure for processing a Bill of Material.
One column on the Assembly Table is a Function Name that contains some busniess rules.
OK, now I'm doing a Proof of Concept and I'm stumped.
Huuuuh!
I will ultimately have about 100 of these things. My plan was using Dynamic SQL to go execute the function.
Note: The function just returns a bit.
So; here's what I had in mind ...
if isnull(@FnNameYN,'') <> ''
exec spinb_CheckYN @FnNameYN, @InvLineID, @FnBit = @FnBit output
CREATE PROCEDURE dbo.spinb_CheckYN
@FnNameYN varchar(50),
@InvLineID int,
@FnBit bit output
AS
declare @SQL varchar(8000)
set @SQL = '
if dbo.' + @FnNameYN + ' (' + convert(varchar(31),@InvLineID) + ')) = 1
set @FnBit = 1
else
set @FnBit = 0'
exec (@SQL)
GO
Obviously; @FnBit is not defined in @SQL so that execution will not work.
Server: Msg 137, Level 15, State 1, Line 4
Must declare the variable '@FnBit'.
Server: Msg 137, Level 15, State 1, Line 5
Must declare the variable '@FnBit'.
So; is there a way to get a value out of a Dynamic SQL piece of code and get that value INTO my OUTPUT variable?
My many thanks to anyone who can solve this riddle for me.
Thank You!
Sigh: For now, it looks like I'll have a huge string of "IF" statements for each business rule function, as follows:
Hopefully a better solution comes to light.
------ Vertical Build1 - Std Vanes -----------
if @FnNameYN = 'fnb_YN_B1_14'
BEGIN
if dbo.fnb_YN_B1_14 (convert(varchar(31),@InvLineID) ) = 1
set @FnBit = 1
else
set @FnBit = 0
END
------ Vertical Build1 - Scissor Vanes -----------
if @FnNameYN = 'fnb_YN_B1_15'
BEGIN
if dbo.fnb_YN_B1_15 (convert(varchar(31),@InvLineID) ) = 1
set @FnBit = 1
else
set @FnBit = 0
END
.
.
.
etc.
View 10 Replies
View Related
Oct 24, 2004
I've looked up Books Online on Dynamic Cursor/ Dynamic SQL Statement.
Using the examples given in Books Online returns compilation errors. See below.
Does anyone know how to use Dynamic Cursor/ Dynamic SQL Statement?
James
-- SQL ---------------
EXEC SQL BEGIN DECLARE SECTION;
char szCommand[] = "SELECT au_fname FROM authors WHERE au_lname = ?";
char szLastName[] = "White";
char szFirstName[30];
EXEC SQL END DECLARE SECTION;
EXEC SQL
DECLARE author_cursor CURSOR FOR select_statement;
EXEC SQL
PREPARE select_statement FROM :szCommand;
EXEC SQL OPEN author_cursor USING :szLastName;
EXEC SQL FETCH author_cursor INTO :szFirstName;
--Error--------------------
Server: Msg 170, Level 15, State 1, Line 23
Line 23: Incorrect syntax near ';'.
Server: Msg 1038, Level 15, State 1, Line 24
Cannot use empty object or column names. Use a single space if necessary.
Server: Msg 1038, Level 15, State 1, Line 25
Cannot use empty object or column names. Use a single space if necessary.
Server: Msg 170, Level 15, State 1, Line 27
Line 27: Incorrect syntax near ';'.
Server: Msg 170, Level 15, State 1, Line 30
Line 30: Incorrect syntax near 'select_statement'.
Server: Msg 170, Level 15, State 1, Line 33
Line 33: Incorrect syntax near 'select_statement'.
Server: Msg 102, Level 15, State 1, Line 35
Incorrect syntax near 'author_cursor'.
Server: Msg 170, Level 15, State 1, Line 36
Line 36: Incorrect syntax near ':'.
View 2 Replies
View Related
Apr 15, 2008
I have a requirment which i have partly accomplished , but could not get through completely
i have a file which comes in a standard format ending with date and seq number ,
suppose , the file name is abc_yyyymmdd_01 , for first copy , if it is copied more then once the sequence number changes to 02 and 03 and keep going on .
then i need to transform those in to new file comma delimited destination file with a name abc_yyyymmdd,txt and others counting file counting record abc_count_yyyymmdd.txt. and move it to a designated folder. and the source file is then moved to archived folder
what i have taken apprach is
script task select source file --------------------> data flow task------------------------------------------> script task to destination file
dataflow task -------------------------> does count and copy in delimited format
what is happening here is i can accomlish a regular source file convert it to delimited destination file --------> and move it to destination folder with script task .
but cannot work the dynamic pick of a source file.
please advise with your comments or solution you have
View 14 Replies
View Related
Mar 2, 2014
I am trying to create an ssis package with dynamic csv file as output. and out format contains query output.
sample file name:
Unique identifier + query output + systemdate();
The expression is looking like this.
@[User::FilePath] + @[User::FileName] + ".CSV"
-- user filepath is a variable from ssis package. File name is the output from SQL query. using script task i have assigned the values to @[User::FileName] .
When I debugged the script task the value getting properly but same variable am using for Flafile destination. but its not working.
View 3 Replies
View Related
Mar 9, 2007
I have created a dynamic SQL program that returns a range of columns (1 -12) based on the date range the user may select. Each dynamic column is month based, however, the date range may overlap from one year to another. Thus, the beginning month for one selection may be October 2005, while another may have the beginning month of January 2007.
Basically, the dynamic SQL is a derived Pivot table. The problem that I need to resolve is how do I now use this dynamic result set in a Report. Please keep in mind that the name of the columns change based on the date range select.
I have come to understand that a dynamic anything is a moving target!
Please advise.
View 3 Replies
View Related
Sep 21, 2007
I need to pass all values of field of a table into a parameter. My table contains a field called typeID, there are 15 typeID in the table. Currently when a user choses a single type they see a report for that type. I want to give them the ability to run a report on all types. My thinking is that I should just be able to pass all typeID values into a string and pass it to the stored Proc... but being new at sql and this truley being the first thing I have ever done in it... I am missing the mark.
Param is @TypeID
Here is the sql to exec the stored proc:USE [db]
GODECLARE @return_value int
EXEC @return_value = [dbo].[OL]
@TypeID = 2,SELECT 'Return Value' = @return_value
GO
I know this is not the actual SP, I am just trying to get it to work, then I will be able to write the proc. It should be something like @Option = 1 AND 2 or 1 & 2 or something to that nature?
View 6 Replies
View Related
Oct 3, 2007
Hi there,I am trying to create a dynamic sql statement as follows:ALTER PROCEDURE [dbo].[GET_FIS_LONGTITLE] -- Add the parameters for the stored procedure here @TABLENAME VARCHAR(25), @COLUMNNAME VARCHAR(25), @COLUMNVALUE VARCHAR(25), @RETURNVALUE VARCHAR(60) OUTASBEGIN DECLARE @SQL AS VARCHAR(4000) SET @SQL = 'SELECT LONGTITLE FROM ' + CAST(@TABLENAME AS VARCHAR(25)) + ' WHERE ' + CAST(@COLUMNNAME AS VARCHAR(25)) + ' = ''' + CAST(@COLUMNVALUE AS VARCHAR(25)) + '''' execute (@SQL) --''' + CAST(@RETURNVALUE AS VARCHAR(60)) + ''' = END here I am trying to get the long title of an item based on the tablename, columnname, the column value. So the select returns the long title from the table as required. But I want to assign that value to the @RETURNVALUE So I tried:SET @SQL = 'SELECT ''' + CAST(@RETURNVALUE AS VARCHAR(60)) + ''' = LONGTITLE FROM ' + CAST(@TABLENAME AS VARCHAR(25)) +
' WHERE ' + CAST(@COLUMNNAME AS VARCHAR(25)) + ' = ''' + CAST(@COLUMNVALUE AS VARCHAR(25)) + ''''
It does not work. I do not know what is missing here.Any help would be greatly appreciated.thanks,Murthy here
View 2 Replies
View Related
Apr 25, 2004
Hello All,
I'm trying to build a SQL statement dynamically based on what was selected.
I'm not sure how set strSQL equal to all the items checked in a checklist.
Also, I don't know how to add the item to strSQL once it's determined that it has been checked.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim strSQL As String = 'dynamic SQL statement
Dim li As ListItem
For Each li In cklCheckList.Items
If li.Selected = True Then
'add item to strSQL
End If
Next
End Sub
Thank you!
Tina
View 17 Replies
View Related
