WITH TEST AS (
SELECT TL.TERMINAL_ID,T.IP_ADDRESS, T.LOGICAL_CONNECT_STATUS, SI.SCHEDULER_ID,
SI.INSTRUCTION, SI.GROUP_ID, SI.MAX_READ_RETRIES, SI.DATA_CHAR, SI.SCHEDULE_TYPE,SI.FILEPATH_FLAG,
T.STATION_NAME,T.BANK_ID FROM SCHEDULERINFO SI
INNER JOIN TERMINALGROUP TG ON SI.GROUP_ID = TG.GROUP_ID INNER JOIN TERMINALGROUPLINK TL ON TG.GROUP_ID = TL.GROUP_ID
[Code] ....
I need to pass dynamic values in FOR SCHEDULER_ID COLUMN. Because I have huge data.
Code written so far. this pivots the column deck and jib_in into rows but thats it only TWO ROWS i.e the one i put inside aggregate function under PIVOT function and one i put inside QUOTENAME()
DECLARE @columns NVARCHAR(MAX), @sql NVARCHAR(MAX); SET @columns = N''; SELECT @columns += N', p.' + QUOTENAME(deck) FROM (SELECT p.deck FROM dbo.report AS p GROUP BY p.deck) AS x;
[Code] ....
I need all the columns to be pivoted and show on the pivoted table. I am very new at dynamic pivot. I tried so many ways to add other columns but no avail!!
I have two dynamic pivot tables that I need to join. The problem I'm running into is that at execution, one is ~7500 characters and the other is ~7000 characters.
I can't set them both up as CTEs and query, the statement gets truncated.
I can't use a temp table because those get dropped when the query finishes.
I can't use a real table because the insert statement gets truncated.
Do I have any other good options, or am I in Spacklesville?
I have this pivot table (I only post the static version as the problem only regards the single quotes)
SELECT * from( select DATEPART(year,DeliverydatePackingSlip) as Year, CASE WHEN DiffPromiseDateFirst < 0 Then '1 - too early' WHEN DiffPromiseDateFirst = 0 Then '2 - on time' ELSE '3 - too late' END as Delivery from iq4bisprocess.FactOTDCustomer WHERE OTD_Exclusion = 0)a PIVOT ( COUNT(Year) For Year
in ([2012],[2013],[2014],[2015])) as pvtNow, packing everything in a string parameter I always stumble over the single quotes. I tried to replace them with CHAR(39), I tried to define a parameter for each occurrence, but always get a syntax error. What am I doing wrong?declare @sql nvarchar(max)
declare @title1 nvarchar(20) declare @title2 nvarchar(20) declare @title3 nvarchar(20) set @title1 = '1 - too early' set @title2 = '2 - on time' set @title3 = '3 - too late'
[Code] .....
exec sp_executesql @sqlThis would throw:Msg 102, Level 15, State 1, Line 3 Incorrect syntax near 'early'.
I have three tables, Users, DocType and Docs. In the DocType table there are multiple entries for allowed document types, the descriptions and other pertinent data. In the Docs table, there are all manner of documents. In the User table are the users.
The DocType and Docs tables are relational. DocType.ID = Docs.tID The Users and Docs tables are relational. Users.ID = Docs.uID
Every user is allowed to have exactly one document of each type. Therefore if there are 10 document types in the DocType table, there may be as many as 10 matching documents in the Docs table.
What I need is a single record for each user returning a boolean for each document type, whether or not there is a matching record in the Docs table.
For example, there are 5 document types defined in the DocType table (types 1 - 5), so the DocType table has 5 rows. In the Docs table, there are 23 rows, and in the User table there are 10 rows. Given that each user may have only one of each DocType, there could be a maximum of 50 rows in the Docs table, but there are 23, meaning that on the average each user is missing one document.Now the challenge is to return a table of all the users (10 rows) with a boolean value for each of the rows in DocType (as columns) based on whether there is a value in the Docs table that matches both the DocType and User.
hi need help how to add to pivot table the day name dynamic for all the month(but i need a short name) like instead Sunday =sun, monday=mon 1-sun 2-mon 3-Tue
+ how can i add the day name in my language
like instead Sunday ="ר?", monday="ש " 03/2008
empid
1-st
2-sun
3-mon
4-Tue
5 -wen
6-Thur
7 -fr
8-st
9 -mon
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
11111
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Code Block DECLARE @Employee TABLE (ID INT, Date SMALLDATETIME, ShiftID TINYINT) DECLARE @WantedDate SMALLDATETIME, -- Should be a parameter for SP @BaseDate SMALLDATETIME, @NumDays TINYINT SELECT @WantedDate = '20080301', -- User supplied parameter value @BaseDate = DATEADD(MONTH, DATEDIFF(MONTH, '19000101', @WantedDate), '19000101'), @NumDays = DATEDIFF(DAY, @BaseDate, DATEADD(MONTH, 1, @BaseDate))
IF @Numdays > 28 BEGIN SELECT p.ID, p.[1] , p.[2],p.[3], p.[4], p.[5], p.[6], p.[7], p.[8], p.[9], p.[10], p.[11], p.[12], p.[13], p.[14], p.[15], p.[16], p.[17], p.[18], p.[19], p.[20], p.[21], p.[22], p.[23], p.[24], p.[25], p.[26], p.[27], p.[28], p.[29], p.[30], p.[31] FROM ( SELECT ID, DATEPART(DAY, Date) AS theDay, ShiftID FROM v_Employee WHERE Date >= @BaseDate AND Date < DATEADD(MONTH, 1, @BaseDate) ) AS y PIVOT ( min(y.ShiftID) FOR y.theDay IN ([1], [2], [3], [4], [5], [6], [7],[8] , [9], [10], [11], [12], [13], [14], [15], [16], [17], [18], [19], [20], [21], [22], [23], [24], [25], [26], [27], [28], [29], [30], [31]) ) AS p END
I am developing a database in PowerPivot and I am wondering how to create many relationships between the same 2 tables. All relationships must be active.
Let me give you a DUMMY example: let's say that the database has 2 tables, the Employee table and Manager table:
I know that this is an Excel question, but I guess it is much more likely that an SQL person using dynamic pivot tables had stepped on this, rather than any advanced Excel user.
I am exporting a dynamic pivot table to Excel through a Stored Procedure. If the Stored Procedure that executes the dynamic pivot table returns 7 columns in one run, and 4 columns in the following update, then I have 3 orphaned columns that are still displayed in the spreadsheet. There isn't any content related to them, but the empty columns with their headers are bothering enough.
I've been trying to play with the data connection properties, but nothing deletes unused columns from former data executions.
I am trying to work on a database with 3 tables. To make it easier I have created a couple of temp tables to work out the syntax.
CREATE TABLE #owner ( [NameId] tinyint IDENTITY(1,1) NOT NULL, [Name] varchar(50) NOT NULL )
INSERT INTO #owner VALUES ('ME'); INSERT INTO #owner VALUES ('Other');
CREATE TABLE #propertyType ( [TypeId] tinyint IDENTITY(1,1) NOT NULL, [Name] varchar(50) NOT NULL )
INSERT INTO #propertyType VALUES ('Home'); INSERT INTO #propertyType VALUES ('Car');
CREATE TABLE #property ( [NameId] tinyint NOT NULL, [TypeId] tinyint NOT NULL, [Value] varchar(50) NOT NULL )
INSERT INTO #property VALUES (1,1, 'Blue'); INSERT INTO #property VALUES (1,2, 'Black'); INSERT INTO #property VALUES (2,1, 'Red'); INSERT INTO #property VALUES (2,2, 'Black');
DROP TABLE #owner; DROP TABLE #propertyType; DROP TABLE #property
| NameId | Name | | 1 | ME| | 2 | other |
| TypeId | Name | | 1 | Home | | 2 | Car |
| NameId | TypeId | Value | | 1 | 1 | Blue | | 1 | 2 | Black | | 2 | 1 | Red | | 2 | 2 | Black |
Where property value is some arbitrary detail. The real propertyType has 50 or 60 rows and not every property has all of the values. I am trying to create a pivot table that would look like so that I can present the data in an easier to understand format:
[Owner | Home | Car ] [ME | Blue | Black ] [Other| Red | Black ]
The propertyTypes are added often, and I don't really have the ability to change them. There is a unique constrant on property on nameid and typeid so there will never be two of the same property with the same owner. Any help would be very helpful.
I am having trouble figuring out why the following code throws an error:
declare @cols nvarchar(50), @stmt nvarchar(max) select @cols = ('[' + W.FKStoreID + ']') from (select distinct FKStoreID from VW_PC_T) as W select @stmt = ' select *
[Code] ...
The issue that I am having is:
Msg 245, Level 16, State 1, Line 4 Conversion failed when converting the varchar value '[' to data type int.
I know that I have to use the [ ] in order to run the dynamic sql. I am not sure what is failing and why as the syntax seems to be clean to me (obviously it is not).
I would like to use a dynamic pivot table in my data source view. It seems that a named query can be only one sql statement. So, I cannot use my multi-statement procedure that creates a dynamic pivot table output.
What is the best course of action here? I could hard-code my pivot table query. I could maintain a redundant table in the pivot format. Do I have any good options?
I've seem some good posts similair to this, but I haven't been able to find my exact issue.
I have the following table:
ID Name Location Start End
1 Joe NY 2000 2001
1 Joe CA 2002 2004
1 Joe MA 2005 2008
2 Sue NJ 2003 2004
2 Sue FL 2004 2008
3 Bob CA 1999 2000
3 Bob WA 2001 2004
3 Bob OR 2005 2006
3 Bob MI 2007 2008
As you can see, the Location, Start and End dates can vary for each person and I don't know how many rows a single person might have.
The result I want, is a "pivot like" table.
ID Name Location1 Start1 End1 Location2 Start2 End2 Location3 Start3 End3 Location4 Start4 End4
1 Joe NY 2000 2001 CA 2002 2004 MA 2005 2008
2 Sue NJ 2003 2004 FL 2004 2008
3 Bob CA 1999 2000 WA 2001 2004 OR 2005 2006 MI 2007 2008
I assume I can first do a count of the maximum rows for an individual and that is greatest number of columns I would need. But doing that and trying to figure out the rest has really stumped me.
Any thoughts, ideas and suggestions would be greatly appreciated.
I have a pivot table query I am running and wanted to find out if there was a way to pull in the dates like getdate() - 12 months, getdate() - 11 months, etc. instead of hard coding the dates.
Here is my query
SELECT Client, [4/1/2007 12:00:00 AM] AS Month1, [5/1/2007 12:00:00 AM] AS Month2, [6/1/2007 12:00:00 AM] AS Month3, [7/1/2007 12:00:00 AM] AS Month4, [8/1/2007 12:00:00 AM] AS Month5, [9/1/2007 12:00:00 AM] AS Month6, [10/1/2007 12:00:00 AM] AS Month7, [11/1/2007 12:00:00 AM] AS Month8, [12/1/2007 12:00:00 AM] AS Month9, [1/1/2008 12:00:00 AM] AS Month10, [2/1/2008 12:00:00 AM] AS Month11, [3/1/2008 12:00:00 AM] AS Month12, [4/1/2008 12:00:00 AM] AS Month13, Engineer FROM (SELECT Client, DollarsBilled, SlipDates, Engineer FROM dbo.MonthlyClientBillables) p PIVOT (SUM(DollarsBilled) FOR SlipDates IN ([4/1/2007 12:00:00 AM], [5/1/2007 12:00:00 AM], [6/1/2007 12:00:00 AM], [7/1/2007 12:00:00 AM], [8/1/2007 12:00:00 AM], [9/1/2007 12:00:00 AM], [10/1/2007 12:00:00 AM], [11/1/2007 12:00:00 AM], [12/1/2007 12:00:00 AM], [1/1/2008 12:00:00 AM], [2/1/2008 12:00:00 AM], [3/1/2008 12:00:00 AM], [4/1/2008 12:00:00 AM])) AS pvt
I want to count the rows in the Incident Table by using filters to limit the rows to be counted if they meet the below conditions. I know I need a logical test for each row of the incident table based on the apparatus table’s rows. But, I want to test for each row in the incident table, counting, but not returning a true or false in the overall measure.Something like look at each incident row, test for true or false and then count IF the statement is true. Then go to the next incident row and do the same. The aggregation would be the final count of “true” results.I tried this for MET objective:
SELECT TOP (100) PERCENT dbo.Filteredfs_franchise.fs_franchiseid AS FranchiseId, dbo.Filteredfs_franchise.fs_brandidname AS Brand, dbo.Filteredfs_franchise.fs_franchisetypename AS [Franchise Type], dbo.Filteredfs_franchise.fs_franchisenumber AS [Franchise Number], dbo.Filteredfs_franchise.fs_transactiontypename AS [Transaction Type], dbo.Filteredfs_franchise.fs_franchisestatusname AS [Status Code],
[Code] ....
I need to pivot this so I can get one row per franchiseID and multiple columns for [Franchisee Name Entity] and [Franchise Name Individual]. Each [Franchisee Name Entity] and [Franchise Name Individual] has associated percentage of ownership.
This has to be dynamic, because each FranchiseID can have anywhere from 1 to 12 respective owners and those can be any combination of of Entity and Individual. Please, see the attached example for Franchise Number 129 (that one would have 6 additional columns because there are 3 Individual owners with 1 respective Percentage of ownership).
The question is how do I PIVOT and preserve the percentage of ownership?
I have written a script to pivot a table into multiple columns.
The script works when run on its own but gives an error when i try to create a view or aprocedure from the same script. The temporary table #.... does not work so i have converted it to a cte.
Here is a copy of the script below
-- Dynamic PIVOT IF OBJECT_ID('#External_Referrals') IS NULL DROP TABLE #External_Referrals; GO DECLARE @T AS TABLE(y INT NOT NULL PRIMARY KEY);
Hi: I'm trying to create an ad-hoc query on a Asp.net page for user. Besides the usual Boolean operators, Field Names, Comparison operators & Field Values, the ad-hoc query also involves multiple tables, eg [Customers] , [Members] & [Orders].
Now I have difficulties on writing a TSQL sp on how to take the dynamic query with different tables under consideration. User might simply query each individual tables (eg, Customers with age > 25) or combination of tables (eg, Membered Customers with Orders Amt > 1000 between 1/1/2005 - 1/31/2005)
I have look up a lot dynamic query on the net but all are with only 1 single table to hit. Could anyone give me a direction on how to write a dynamic query script with multiple tables under consideration? Much appreciated.
ps: The ad-hoc query only contains these defined tables, no other table will be involved.
I have tried building an Inline TVF, as I assume this is how it would be used on the DB; however, I am receiving the following error on my code, I must be missing a step somewhere, as I've never done this before. I'm lost on how to implement this clr function on my db?
Error: Msg 156, Level 15, State 1, Procedure clrDynamicPivot, Line 18 Incorrect syntax near the keyword 'external'. CREATE FUNCTION clrDynamicPivot ( -- Add the parameters for the function here @query nvarchar(4000), @pivotColumn nvarchar(4000),
1) Production data with column headers: Key, Facility, Line, Time, Output 2) Costs data with column headers: Key, Site, Cost Center, Time, Cost
The tables have a common key named obviously as Key. The data looks like this:
Key Facility Line Time Output Alpha
I would like to have two pivot tables which I can filter with ONE slicer based on the column Key. The first pivot table shows row labels Facility, Line and column labels Time. Value field is Output. The second pivot table shows row labels Site, Cost Center, and column lables Time. Value field is Cost.How can I do this with Power Pivot? I tried by linking both tables above to a table with unique Keys in PowerPivot and then creating a PivotTable where I would have used the Key from the Keys table.
Is it possible to generate automatic refresh of excel 2013 table which displays some table of a power pivot model on file open?? I dont want to use pivottable (which supports this ...)
I have below tables in my power pivot.Fact 1 & Fact 2 - connected directly to Mainframes - Data is from the same table broken up due to size of the data.Date Table - Relation ship between both the fact tables.How do i create a summary pivot to get the number of tasks that have been completed in each month.
I have a simple pivot table (screenshot below) that has two variables on it: one for entry year and another for 6 month time intervals. I have very simple DAX functions that count rows to determine the population N (denominator), the number of records in the time intervals (numerator) and the simple percent of those two numbers.
The problem that I am having is that the function for the population N is not overriding the time interval on the pivot table when I use an ALL function to do so. I use ALL in other very simple pivot tables to do the same thing and it works fine.
The formula for all three are below, but the one that is the issue is the population N formula. Why ALL would not work, any other way to override the time period variable on the pivot table.
Population N (denominator): =CALCULATE(COUNTROWS(analyticJudConsist),ALL(analyticJudConsist[CurrentTimeInCare1])) Records in time interval (numerator): =COUNTROWS(analyticJudConsist) Percent: =[countrows]/[denominatorCare]
How can I apply "Min" formula under a "new measure" (calculated field) within a pivot table under Power pivot 2010?Can see that neither does it allow me to apply "min" formula directly "formula box" nor could find any other option.Intent formula: "=Min(1,sum(a:b))" this isn't allowed so all I can do is "=sum(a:b)".
I have simple pivot table (below screenshot with info redacted) that displays a population number ("N" below), this is the denominator, a cumulative numerator number (below "#") and a simple cumulative percent that just divides the numerator by the denominator. It cumulates from top to bottom. The numerator and percent are cumulative using the below functions. There are two problems with the numerator and percent:
1. When there is not a number for the numerator, there is no value displayed for both the numerator and the percent..There should be a zero displayed for both values. 2. When there has been a prior number for the numerator and percent (for a prior month interval) but there is no number for the numerator in the current month interval, the prior month number and percent are not displayed in the current month interval--see the 3rd yellow line, this should display "3" and "16.7%" from the second yellow line.Here is the formula for the numerator:
=CALCULATE(count(s1Perm1[entity_id]),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))) Here is the formula for the percent: =(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))
Is there a way for using the PIVOT synatx with a dyamic/unknown list of columns? In most PIVOT examples ther columns are "hard" coded but if for example, you are pivoting a sales order table where u don't know which Fiscal Years the orders cover, how could you do this?
I have data in my Powerpivot window which was generated by a sql query. This data includes a field named 'Cost' and every row shows a value for 'Cost' greater than zero. The problem is that when I display this data in the pivot table all entries for Cost display as $0. At first I thought that maybe Cost was set to a bogus data type (such as 'text) but it is set to ''Decimal Number' so that's not the problem.
What is happening and how do I fix it so that my pivot table reflects the values for 'Cost'?
I have a data table that contains budget and actual data by month. I use the data to create a pivot that shows actual results next to budgeted results. I need a column that shows that variance between those columns. I think my issue is that the "Type" field contains actual and Budget. I sum on "Type". I can't seem to create a sum since those items are in the same field or am I missing something?
