ERROR: A Variable May Only Be Added Once To Either The Read Lock List Or The Write Lock List.
May 22, 2006
Hi,
I have set of 2 DTS packages, one of which calls the other by forming a command-line (dtexec) using a Execute Process task.
From the parent package-> Execute Process Task->
dtsexec /F etc... /<pkg variable> = "servername"
Each of the parent and the called package have a variable: "User::DWServerSQLInstance" which is mapped to the SQL server connection manager server name property using an expression. The outer package has the above variable and so does the inner called package (which gets assigned through the command line from the outerpackage call to inner)
I "sometimes" get the following error:
OnError,I4,TESTDOMAdministrator,ACDWAggregation,{A1F8E43F-15F1-4685-8C18-6866AB31E62B},{77B2F3C7-6756-46EB-8C01-D880598FB4B3},5/22/2006 5:10:28 PM,5/22/2006 5:10:28 PM,-1073659822,0x,The variable "User::DWServerSQLInstance" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
Help would be appreciated!
I have seen other posts on this but, not able to relate the solution to my scenario.
View 9 Replies
ADVERTISEMENT
May 10, 2006
Hi All,
I have seen a few other people have this error.
Package works fine when run from BIDS, DTExec, dtexecui. When I schedule it, It get these random errors. (See below)
The main culprit is a variable called "RecordsetFileDIR" which is set using an expression. (@[User::_ROOT] + "RecordSets\")
A number of other variables use this as part of their expression and as they all fail, pretty much everything dies.
I have installed SP1 (Not Beta) on server. Package uses config files to set the value of _ROOT.
The error does not always seem to be with this particular variable though. Always a variable that uses an expression but errors are random. Also, It will run 3 out of 10 times without a problem. I am the only person on the server at the time.
Any ideas?
Cheers,
Crispin
Error log:
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073659822,0x,The variable "User::RecordsetFileDIR" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073639420,0x,The expression for variable "rsHeaderFile" failed evaluation. There was an error in the expression.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
View 1 Replies
View Related
Feb 2, 2007
I simply made my script task (or any other task) fail
In my package error handler i have a Exec SQL task - for Stored Proc
SP statement is set in following expression (works fine in design time):
"EXEC [dbo].[us_sp_Insert_STG_FEED_EVENT_LOG] @FEED_ID= " + (DT_WSTR,10) @[User::FEED_ID] + ", @FEED_EVENT_LOG_TYPE_ID = 3, @STARTED_ON = '"+(DT_WSTR,30)@[System::StartTime] +"', @ENDED_ON = NULL, @message = 'Package failed. ErrorCode: "+(DT_WSTR,10)@[System::ErrorCode]+" ErrorMsg: "+@[System::ErrorDescription]+"', @FILES_PROCESSED = '" + @[User::t_ProcessedFiles] + "', @PKG_EXECUTION_ID = '" + @[System::ExecutionInstanceGUID] + "'"
From progress:
Error: The Script returned a failure result.
Task SCR REIL Data failed
OnError - Task SQL Insert Error Msg
Error: A deadlock was detected while trying to lock variable "System::ErrorCode, System::ErrorDescription, System::ExecutionInstanceGUID, System::StartTime, User::FEED_ID, User::t_ProcessedFiles" for read access. A lock could not be acquired after 16 attempts and timed out.
Error: The expression ""EXEC [dbo].[us_sp_Insert_STG_FEED_EVENT_LOG] @FEED_ID= " + (DT_WSTR,10) @[User::FEED_ID] + ", @FEED_EVENT_LOG_TYPE_ID = 3, @STARTED_ON = '"+(DT_WSTR,30)@[System::StartTime] +"', @ENDED_ON = NULL, @message = 'Package failed. ErrorCode: "+(DT_WSTR,10)@[System::ErrorCode]+" ErrorMsg: "+@[System::ErrorDescription]+"', @FILES_PROCESSED = '" + @[User::t_ProcessedFiles] + "', @PKG_EXECUTION_ID = '" + @[System::ExecutionInstanceGUID] + "'"" on property "SqlStatementSource" cannot be evaluated. Modify the expression to be valid.
Warning: The Execution method succeeded, but the number of errors raised (4) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
And how did I get 4 errors? - I only set my script task result to failure
View 11 Replies
View Related
Sep 17, 2007
I've been getting the error below inconsistently when kicking SSIS packages off from a custom windows service. This same service works fine on our development and integration servers but not on our production servers. When I run the packages manually, it works great. Can someone provide any insight as to what is going on?
Error:
The variable "System::LocaleID" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
I have tired the soultions found in http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=211081&SiteID=1 and applied the hotfix http://support.microsoft.com/kb/918091
I'm running SQL Server 2005 on Windows Server 2003 R2 SP2.
Thanks in advance
View 19 Replies
View Related
Sep 17, 2015
I have created some packages in visual studio and run the packages from there and they all run fine. I have then imported the THEM in SQL Integration services Catalogues and run the packages individually and they all run successfully.When I tried to create the job to run the packages in a scheduled job I get the following error messages: Backup database error: failed to lock variable "RunID" for access with error 0xc001001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the variable collection on a container during execution of the package and the variable is not there.....
Backup database error. The execute method on the task. Backup database returned code 0x80131904 (Login failed for user 'loginname' The execute method must succeed and indicate the result using an "out" parameter.
View 0 Replies
View Related
Apr 7, 2004
Hi
We are facing an acute situation in our web-application. Technology is ASP.NEt/VB.NET, SQL Server 2000.
Consider a scenario in which User 1 is clicking on a button which calls a SQL stored procedure. This procedure selects Group A of records of Database Page1.
At the same time if User 2 also clicks the same button which calls same SQL stored procedure. This procedure selects Group B of records of Database Page1.
So, its the same Page1 but different sets of records. At this moment, both the calls have shared locked on the Page1 inside the procedure.
Now, in call 1, inside the procedure after selecting Group A of records, the next statement is and update to those records. As soon as update statement executes, SQL Server throws a deadlock exception as follows :
Transaction (Process ID 78) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction
We are able to understand why its happening. Its because, Group A and Group B of records are on the same Page1. But both the users have shared lock on the Page1. So, no one gets the exclusive lock in records for update, even though, the records are different.
How can I resolve this issue? How can I get lock on wanted rows instead of entire page?
Please advice. Thanks a bunch.
Pankaj
View 1 Replies
View Related
May 20, 2008
Hi All
Is there a way in SQL to query the data with out locking.
My intention is to read commited data with out locking
Thanks
View 8 Replies
View Related
Jul 20, 2005
Hi,Version Info: SQLSERVER 2000 SP3I am trying to understand how SQL Server works with SERIALIZABLE read.I am fairly new to SQL Server, having mainly worked with Informix.We are getting lock timeout error in our application. Our lock timeoutis set to 20 seconds. I am trying to investigate why locks are held forsuch a long time in the first place.I believe SQLServer tries to put keylocks as much as possible forensuring serializibility. For e.g.SELECT column_bfrom table_awhere column_c between 1000 and 1100what if column_c has no index. Does it switch over the data row.And what if a table has no index. Will it go for table lock, as ituse to do in earlier versions.TIA.--email id is bogus
View 3 Replies
View Related
Jun 5, 2008
Hello,Could some clarify for me? I’ve been told that I should add lock statements to my database write querys (update, delete, insert). I’m not sure If it’s necessary though. The only documentation I’ve found so far is how to implement a lock statement with threading but I’m not using the threading namespace. What best practice and how would I implement this without threading or should I be using threading?Thanks in advance!
View 4 Replies
View Related
Sep 4, 2006
Hello,
We currently use SQL Serv 2000 with an ERP application and VB applications.
Both system work with the same database & tables but the ERP application seems to put exclusive lock on all tables it needs during processes. So our VB applications are not able to read these data and we receive TIMEOUT error.
What can I do ?
thank you
Nico
View 4 Replies
View Related
May 12, 2015
I have a requirement to read a value from table and increment it by 1. There can be multi-threads doing the same operation and would need a ROW LOCK so that read and write both are atomic. How can i put an exclusive lock on the row before I read the value from the table.
CREATE TABLE [dbo].[tblOnboardingSequence](
[OnboardingSequenceID] [uniqueidentifier] NOT NULL,
[Name] [nvarchar](255) NOT NULL,
[NextNumber] [bigint] NOT NULL,
CONSTRAINT [PK_OnboardingSequence] PRIMARY KEY CLUSTERED(
[OnboardingSequenceID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
My Stored Procedure has below logic
DECLARE @NextNumber BIGINT
----------- Acquire row lock here
SELECT @NextNumber = NextNumber FROM tblOnboardingSequence WHERE Name = 'TPO'
UPDATE tblOnboardingSequence SET NextNumber = @NextNumber + 1 WHERE Name = 'TPO'
----------- Release row lock here
I would like to have a row lock for the row having Name "TPO" before SELECT query and release after UPDATE query.
What si the best way to deal with this?
View 2 Replies
View Related
Sep 26, 2006
Hi,
I am trying to develop a SSIS package which will read the records from the flat file and insert them into a destination table. I have some validations written in script component. I have declared two Read Write variables with package level scope. when i try to assign a value to the variable in the script component and run the package, the package throws me an error "The collection of variables locked for read and write access is not available outside of PostExecute".
What should be done to over come the problem please help me on this regard
Thanks
Madhavan.M
View 15 Replies
View Related
Mar 8, 2006
In a multi-user environment, I would like to get a list of Idsgenerated, similar to:declare @LastId intselect @LastId = Max(Id) From TableManiaINSERT INTO TableMania (ColumnA, ColumnB)SELECT ColumnA, ColumnB From OtherTable Where ColumnC > 15--get entries just addedSELECT * FROM TableMania WHERE Id > @LastIdThe above works fine, except I'm assuming it will not work in amulti-user environment. Is there any way to get the set of Ids thatwere just added in the previous statement (similar to @@IDENTITY)without doing all of this in a serializable transaction or making atemp table of every single Id before the insert statement?
View 41 Replies
View Related
May 23, 2001
Hi,
I want to lock a table so others cannot lock it but able to read it inside transactions.
The coding I need is something like this: set implicit_transactions on begin transaction select * from table1 with (tablock, holdlock) update table2 set field1 = 'test' commit transaction commit transaction
I have tried the coding above, it won't prevent others from locking table1.
So, I changed the tablock to tablockx to prevent others from locking table1. But this will also prevent others from reading table1. So, how can I lock table1 so others cannot lock it but still able to read it?
Thank you for any help
View 1 Replies
View Related
Jun 19, 2006
I'm having a transactional replication which replicates data every 1min.... and i got a job which runs every 15mins and pulls the reports from source db which is being replicated.
Some times when the replication is pushing the data the same time the job is trying to generate reports and as the table is being locked at the time of replication the dead lock issue is rinsing and the job is getting failed.
Please some one help me in solving this issue.
Thanks
View 1 Replies
View Related
Mar 31, 2008
Hi guys,
I want to give someone read only permission to our SQL server so they can log in and look at the database structure and query a few tables. I've set up the user but the problem is that when I connect in SQL server remotley, it shows all the other DB's on the server even though it is restricting access to them. Can these other DB's be hidden so that only the DB the user has access to shows up?
Cheers for your help!
View 9 Replies
View Related
Nov 1, 2007
I want to write a variable say testVar in PostExecute of my script. I also want to read the same variable at the start of my script block.
How to specify this variable in the script transformation editor
ReadOnlyVariables = ????
WriteOnlyVariables = ???
If i just define
WriteOnlyVariables = testVar
will it work . I mean i cannot use testVar in both read & write
Any suggestions...
Thanks
View 3 Replies
View Related
Feb 6, 2007
I am attempting to modify the ADS sample to work with my own application and am running into a snag. I have a simple sqlce database that has two tables in it. I have everything working up until the point where I try to "Pull" the data. At this point in time this is what happens.
1.) I successfully Drop Table1 from the SQLCE database and then Pull "Table1" from the desktop database
2.) When attempting to Pull Table2. It runs the DoesTableExist Function, identifies that the table does exist and therefore tries to run the "DropTable" routine before Pulling the desktop Table2 data. As soon as the sqlCmd.ExecuteNonQuery of the DropTable routine runs I get the following error....
"The system timed out waiting for a lock. [ Session id = 1,Thread id = 1318094114,Process id = 1318068802,Table name = Table2,Conflict type = x lock (s blocks),Resource = DDL ][Table2]"
Of Note...I converted the sample to VB.NET so it's possible something didn't convert right? My guess is that it probably has something to with my SQLCE Database but I haven't the slightest clue where to go from there. Anyone have any ideas what might be going on?
Thanks,
Mike
View 4 Replies
View Related
Jun 15, 2015
So at the moment, I don't have a function by the name CONCATENATE. What I like to do is to list all those different values that go with a single CASE_ID to appear as a a comma separate list. You might have a better way of doing without even writing a function
So the output would look like :
CASE_ID VARIABLE
=====================
1 [ABC],[HDR],[GHHHHH]
2 [ABCSS],[CCHDR],[XXGHHVVVHHH],[KKKJU],[KLK]
SELECT
preop.Case_ID,
dbo.Concatenate( '[' + CAST(preop.value_text AS VARCHAR) + ']' ) as variable
FROM
dbo.TBL_Preop preop
WHERE
preop.Deleted_CD = 0
GROUP BY
preop.Case_ID
View 8 Replies
View Related
Aug 3, 2005
I have made the following test stored proc that all it does right nowis accept a string variable that will be a list ie. :5,9,6,13. Rightnow all the SP is doing is creating a temp table to store the values inthe list, then looping through the list and inserting the values intothe temp table, then selecting all the records from teh temp table.It's WORKING however i must have done something wrong because it's notinserting ALL the values. If the list is "5,9,6,13" only 5, 9 and 6will get inserted, not the 13. if I pass in the list like this"5,9,6,13," with an extra comma at the end, they all get inserted finebut thats not how the strings will be coming in. Here's what I have sofar:CREATE PROCEDURE sp_searchTaskTest-- in params@strAssignedTovarchar (200) = NULLASCREATE TABLE #tblAssignedTo (strAssignedToIDvarchar(10))-- initialize variablesDECLARE @lengthOfString intDECLARE @startingPosition intDECLARE @parseString1 intDECLARE @strAssignedToID varchar(10)SET @startingPosition = 0SELECT @parseString1 = CHARINDEX (',', @strAssignedTo,1)WHILE ( @parseString1 > 0 )BEGINSELECT @parseString1 = CHARINDEX (',',@strAssignedTo,@startingPosition)SET @lengthOfString = @parseString1 - @startingPositionIF @lengthOfString > 0BEGINSET @strAssignedToID = SUBSTRING(@strAssignedTo, @startingPosition,@lengthOfString)SET @startingPosition = @parseString1 + 1ENDELSEBEGINSET @parseString1 = 0SET @strAssignedToID = ''ENDIF @strAssignedToID != ''BEGININSERT #tblAssignedTo(strAssignedToID)VALUES(@strAssignedToID)ENDENDSELECT * FROM #tblAssignedToGO
View 2 Replies
View Related
Apr 9, 2008
I know I can do a JOIN(parameter, "some seperator") and it will build me a list/string of all the values in the multiselect parameter.
However, I want to do the same thing with all the occurances of a field in my result set (each row being an occurance).
For example say I have a form that is being printed which will pull in all the medications a patient is currently listed as having perscriptions for. I want to return all those values (say 8) and display them on a single line (or wrap onto additional lines as needed).
Something like:
List of current perscriptions: Allegra, Allegra-D, Clariton, Nasalcort, Sudafed, Zantac
How can I accomplish this?
I was playing with the list box, but that only lets me repeat on a new line, I couldn't find any way to get it to repeate side by side (repeat left to right instead of top to bottom). I played with the orientation options, but that really just lets me adjust how multiple columns are displayed as best I can tell.
Could a custom function of some sort be written to take all the values and spit them out one by one into a comma seperated string?
View 21 Replies
View Related
Apr 18, 2007
HI...
I need to do a simple task but it's difficult to a newbie on ssis..
i have two tables...
first one has an identity column and the second has fk to the first...
to each dataset row i need to do an insert on the first table, get the @@Identity and insert it on the second table !!
i'm trying to use ole db command but it's not working...it's showing the error "Insert Value list doest not match column list"
here is the script
INSERT INTO Address(
CepID,
Street,
Number,
Location,
Complement,
Reference)Values
(
?,
?,
?,
?,
?,
?
)
INSERT INTO CustomerAddress(
AddressID,
CustomerID,
AddressTypeID,
TypeDescription) VALUES(
@@Identity,
?,
?,
?
)
what's the problem ??
View 7 Replies
View Related
Mar 21, 2013
What is this? How do I fix it? I get a ton of these and it slows down the server for 5 minutes.
An error occurred in Service Broker internal activation while trying to scan the user queue 'msdb.dbo.ExternalMailQueue' for its status. Error: 1222, State: 51. Lock request time out period exceeded. This is an informational message only. No user action is required.
View 1 Replies
View Related
Apr 29, 2015
All examples I found refer to classes under Microsoft.SharePoint namespace. However, I have the SharePoint CSOM that only gives me the Microsoft.Sharepoint.Client namespace.
I need to read the selected values of a multichoice field, but not sure how to do it with classes in the namespace above.
everthing works, exept the TSQL_x0020_Reference_x0020_Numbe field.
my code looks like this:
Webweb = cont.Web;
cont.Load(web);
cont.ExecuteQuery();
Listsstest = web.Lists.GetByTitle("T-SQL
Code Review Tracking");
//CamlQuery query = CamlQuery.CreateAllItemsQuery();
[code]....
View 2 Replies
View Related
Feb 14, 2007
I have a variable called @ORComm which has been selected using a cursor from each line on an order.
DECLARE TC2 CURSOR FOR
SELECT [Commodity],[Total] FROM [CSITSS].[dbo].[Ordrate] WHERE [OrderNumber]= @OrdNum AND [Companydiv] = 'GLPC-TRANS'
OPEN TC2
FETCH NEXT FROM TC2 INTO @ORComm, @ORTotal
I need to compare the resulting @ORComm against a list of valid commodity types selectable by
SELECT [CommodityClass] FROM [CSITSS].[dbo].[Comclass] WHERE [CompanyDiv] = 'GLPC-TRANS' AND [DELETED] = 0
What's the easiest way to do this?
View 2 Replies
View Related
Apr 16, 2014
I'm looking for a way to store a list of values in a variable. The query user will need to input a list of file numbers, and my query will need to perform a couple operations on that same list of values, which is why it seems a variable would be most appropriate.
I can't obtain the list of values from the database as they will have to be entered by the user. I'm imagining storing these in a table variable.... User just copies/pastes the list of values somewhere into the query code and executes as usual.
View 7 Replies
View Related
Apr 7, 2008
Hello.
I created a package scope variable to use as a sql command for a data
flow task. But when I click the drop down to select it, nothing
appears. Anybody else have this issue and find a solution?
Thanks,
Rich
View 2 Replies
View Related
Sep 27, 2007
Group,
First let me say that I'm new to SSIS, so be gentle with me.
I need to extract a limited set of data from a very large view in Oracle (I know, yuk!). The view contains millions of rows, but I only need the child matches of 343 unique keys in a one to many relationship. In pure SQL the query would look something like this.
Select proj, tn, rn, total FROM Oracle.view WHERE proj in (select distinct proj from MSSQL.dbo.projlist)
As you can see, this is an impossible query on many levels.
My first thought was to get the runtime list into a variable and use that variable as a parameter in the Oracle OleDb Source. Alas, the Oracle source will not allow me to add a parameter.
My second thought was to use a script component and build a SQL_Command string into a variable with all of my keys included. Then use the read_write variable as the SQL Command from variable in the Oracle Source. My attempts to construct such a variable expression have failed.
Any ideas would be appreciated.
RH
View 11 Replies
View Related
Jan 20, 2005
Ok, I want to write a stored procedure / query that says the following:
Code:
If any of the items in list 'A' also appear in list 'B' --return false
If none of the items in list 'A' appear in list 'B' --return true
In pseudo-SQL, I want to write a clause like this
Code:
IF
(SELECT values FROM tableA) IN(SELECT values FROM tableB)
Return False
ELSE
Return True
Unfortunately, it seems I can't do that unless my subquery before the 'IN' statement returns only one value. Needless to say, it returns a number of values.
I may have to achieve this with some kind of logical loop but I don't know how to do that.
Can anyone help?
View 3 Replies
View Related
Mar 21, 2008
I have a select list of fields that I need to select to get the results I need, however, I would like to insert only a chosen few of these fields into a table. I am getting the error, "The select list for the INSERT statement contains more items than the insert list. The number of SELECT values must match the number of INSERT columns."
How can I do this?
Insert Query:
insert into tsi_payments (PPID, PTICKETNUM, PLINENUM, PAMOUNT, PPATPAY, PDEPOSITDATE, PENTRYDATE, PHCPCCODE)
SELECT DISTINCT
tri_IDENT.IDA AS PPID,
tri_Ldg_Tran.CLM_ID AS PTicketNum,
tri_ClaimChg.Line_No AS PLineNum,
tri_Ldg_Tran.Tran_Amount AS PAmount,
CASE WHEN tln_PaymentTypeMappings.PTMMarsPaymentTypeCode = 'PATPMT'
THEN tri_ldg_tran.tran_amount * tln_PaymentTypeMappings.PTMMultiplier
ELSE 0 END AS PPatPay,
tri_Ldg_Tran.Create_Date AS PDepositDate,
tri_Ldg_Tran.Tran_Date AS PEntryDate,
tri_ClaimChg.Hsp_Code AS PHCPCCode,
tri_Ldg_Tran.Adj_Type,
tri_Ldg_Tran.PRS_ID,
tri_Ldg_Tran.Create_Time,
tri_Ldg_Tran.Adj_Group,
tri_Ldg_Tran.Payer_ID,
tri_Ldg_Tran.TRN_ID,
tri_ClaimChg.Primary_Claim,
tri_IDENT.Version
FROM [AO2AO2].MARS_SYS.DBO.tln_PaymentTypeMappings tln_PaymentTypeMappings RIGHT OUTER JOIN
qs_new_pmt_type ON tln_PaymentTypeMappings.PTMClientPaymentDesc =
qs_new_pmt_type.New_Pmt_Type RIGHT OUTER JOIN
tri_Ldg_Tran RIGHT OUTER JOIN
tri_IDENT LEFT OUTER JOIN
tri_ClaimChg ON tri_IDENT.Pat_Id1 =
tri_ClaimChg.Pat_ID1 ON tri_Ldg_Tran.PRS_ID =
tri_ClaimChg.PRS_ID AND
tri_Ldg_Tran.Chg_TRN_ID =
tri_ClaimChg.Chg_TRN_ID
AND tri_Ldg_Tran.Pat_ID1 = tri_IDENT.Pat_Id1 LEFT OUTER JOIN
tri_Payer ON tri_Ldg_Tran.Payer_ID
= tri_Payer.Payer_ID ON qs_new_pmt_type.Pay_Type
= tri_Ldg_Tran.Pay_Type AND
qs_new_pmt_type.Tran_Type = tri_Ldg_Tran.Tran_Type
WHERE (tln_PaymentTypeMappings.PTMMarsPaymentTypeCode <> N'Chg')
AND (tln_PaymentTypeMappings.PTMClientCode = 'SR')
AND (tri_ClaimChg.Primary_Claim = 1)
AND (tri_IDENT.Version = 0)
View 2 Replies
View Related
Feb 12, 2008
Hi,
I have a a table that holds a list of words, I am trying to add to the list, however I only want to add new words. But I wish to return from my proc the list of words with ID, whether it is new or old.
Here's a script. the creates the table,indexes, function and the storeproc. call the proc like procStoreAndUpdateTokenList 'word1,word2,word3'
My table is now 500000 rows and growing and I am inserting on average 300 words, some new some old.
performance is a not that great so I'm thinking that my code can be improved.
SQL Express 2005 SP2
Windows Server 2003
1GB Ram....(I know, I know)
TIA
Code Snippet
GO
CREATE TABLE [dbo].[Tokens](
[TokenID] [int] IDENTITY(1,1) NOT NULL,
[Token] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
CONSTRAINT [PK_Tokens] PRIMARY KEY CLUSTERED
(
[TokenID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
CREATE UNIQUE NONCLUSTERED INDEX [IX_Tokens] ON [dbo].[Tokens]
(
[Token] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = ON, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
CREATE FUNCTION [dbo].[SplitTokenList]
(
@TokenList varchar(max)
)
RETURNS
@ParsedList table
(
Token varchar(255)
)
AS
BEGIN
DECLARE @Token varchar(50), @Pos int
SET @TokenList = LTRIM(RTRIM(@TokenList ))+ ','
SET @Pos = CHARINDEX(',', @TokenList , 1)
IF REPLACE(@TokenList , ',', '') <> ''
BEGIN
WHILE @Pos > 0
BEGIN
SET @Token = LTRIM(RTRIM(LEFT(@TokenList, @Pos - 1)))
IF @Token <> ''
BEGIN
INSERT INTO @ParsedList (Token)
VALUES (@Token) --Use Appropriate conversion
END
SET @TokenList = RIGHT(@TokenList, LEN(@TokenList) - @Pos)
SET @Pos = CHARINDEX(',', @TokenList, 1)
END
END
RETURN
END
GO
CREATE PROCEDURE [dbo].[procStoreAndUpdateTokenList]
@TokenList varchar(max)
AS
BEGIN
SET NOCOUNT ON;
create table #Tokens (TokenID int default 0, Token varchar(50))
create clustered index Tind on #T (Token)
DECLARE @NewTokens table
(
TokenID int default 0,
Token varchar(50)
)
--Split ID's into a table
INSERT INTO #Tokens(Token)
SELECT Token FROM SplitTokenList(@TokenList)
BEGIN TRY
BEGIN TRANSACTION
--get ID's for any existing tokens
UPDATE #Tokens SET TokenID = ISNULL( t.TokenID ,0)
FROM #Tokens tl INNER JOIN Tokens t ON tl.Token = t.Token
INSERT INTO Tokens(Token)
OUTPUT INSERTED.TokenID, INSERTED.Token INTO @NewTokens
SELECT DISTINCT Token FROM #Tokens WHERE TokenID = 0
return the list with id for new and old
SELECT TokenID, Token FROM #Tokens
WHERE TokenID <> 0
UNION
SELECT TokenID, Token FROM @Tokens
COMMIT TRANSACTION
END TRY
BEGIN CATCH
DECLARE @er nvarchar(max)
SET @er = ERROR_MESSAGE();
RAISERROR(@er, 14,1);
ROLLBACK TRAN
END CATCH;
END
GO
View 5 Replies
View Related
Sep 20, 2007
Hi All,
I have never used PIVOT before but looks exactly what I want for this scenario:
I have rows of dates associated with ID of Hotels and Room avalability for each Hotel/Date..... I want to show the sum of the rooms per date as columns I am using something like this:SELECT dbHotelID ,[09/20/2007]as [Today],[09/21/2007]as [Today+1],[09/22/2007]as [Today+2] FROM vwRoomAvailable PIVOT (SUM(dbRoomNumber) FOR AvailableDate IN ([09/20/2007], [09/21/2007], [09/22/2007])) AS pAs you can see I know how may days I want in advance so know how many columsn so its not dynamic.. I just dont know what the dates are:I would like to do something like:
DECLARE @todayDate varchar(255),
DECLARE @todayPlusOne varchar(255),
DECLARE @todayPlusTwo varchar(255) SET @todayDate = CONVERT(CHAR, GETDATE(),101)SET @todayPlusOne = CONVERT(CHAR, DATEADD(d, 1, GETDATE(),101)SET @todayPlusTwo = CONVERT(CHAR, DATEADD(d, 2, GETDATE(),101) SELECT dbHotelID,@todayDate as Today,@todayPlusOne as [Today+1],@todayPlusTwo as [Today+2] FROM vwRoomAvailable PIVOT (SUM(dbHotelRoomAvailabilityNumber) FOR AvailableDate IN ([@todayDate], [@todayPlusOne], [@todayPlusTwo])) AS pBut I can’t seem to put the variable in the PIVOT value list or GETDATE() Anyone got any ideas or do I just try and do this another way and forgot PIVOT. I am using sql server 2005 express.
Thanks in advance.
Lee
View 5 Replies
View Related
Aug 22, 2007
Hi,
I am back with one more problem..
I have created few reports using SSRS 2005. I am using Oracle database in Data Source to fetch my data. It is working fine and showing me report correctly. But after running the report 8 to 10 times, it starts giving me Memory error. To get rid of that, I need to recycle (stop-start) ReportingService from IIS.
I am exactly getting following error...
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
I am not getting the actual problem, why is it giving memory error only after running few times? Please let me know if anyone facing same problem or knowing the solution for the problem.
Thanks,
HMaheta
View 3 Replies
View Related
