ERROR AT DATA FLOW TASK
Oct 17, 2006
HI, I HAVE A NEW PROBLEM...HOPE SOMEONE KNOWS WHAT THE $#%#$ IS HAPPENING. HERE IT´S THE THING: I´M USING A DATA FLOW TASK TO READ DATA FROM AN ORACLE SERVER AND TRANSFER THE INFO TO MY SQL 2005 SERVER, THE SOURCE IS AVAILABLE AND THE CONNECTION IS WORKING, I'M USING A DATA READER SOURCE TO CONNECT AND EXTRACT. I´VE PUT THIS DTS IN A JOB AND IT WAS OK, IT HAD BEEN RUNNING OK FOR ALMOST A MONTH BUT SUDDENLY HIS MORNING IT FAILED WITH THE FOLLOWING ERROR:
SSIS package "SAZSIE_CargaVentasSeguros (1).dtsx" starting.
Information: 0x4004300A at Extrae SAZ_GranoO_New, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Extrae SAZ_GranoO_New, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Extrae SAZ_GranoO_New, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Extrae SAZ_GranoO_New, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Extrae SAZ_GranoO_New, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0047062 at Extrae SAZ_GranoO_New, SAZ_GranoONew [421]: System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper90 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer90[] buffers, IntPtr ppBufferWirePacket)
Error: 0xC0047038 at Extrae SAZ_GranoO_New, DTS.Pipeline: The PrimeOutput method on component "SAZ_GranoONew" (421) returned error code 0x80004003. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Extrae SAZ_GranoO_New, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Information: 0x402090DF at Extrae SAZ_GranoO_New, OLE DB Destination [1022]: The final commit for the data insertion has started.
Information: 0x402090E0 at Extrae SAZ_GranoO_New, OLE DB Destination [1022]: The final commit for the data insertion has ended.
Information: 0x40043008 at Extrae SAZ_GranoO_New, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Extrae SAZ_GranoO_New, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Extrae SAZ_GranoO_New, DTS.Pipeline: "component "OLE DB Destination" (1022)" wrote 19522 rows.
Task failed: Extrae SAZ_GranoO_New
Warning: 0x80019002 at SAZSIE_CargaVentasSeguros: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "SAZSIE_CargaVentasSeguros (1).dtsx" finished: Failure.
THE DATA HAS BEEN COPIED INTO MY DESTINATION TABLE, BUT THE PACKAGE ENDS IN AN ERROR, WHAT IS THE PROBLEM WITH THIS???
PLASE SOMEONE !!!!
THANKS!!!!!!!
View 8 Replies
ADVERTISEMENT
May 4, 2006
Hi,
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
View 17 Replies
View Related
Dec 20, 2007
Hi,
I'm trying to get a record count out of a databse using OLE DB Source and row count tasks but keep getting an error. I set up a variable as int32 and select the variable name in the row count task and when I go to the Input Columns tab to select a field to count, it gives me this error:
Error at Data Flow Task[Row Count[505]]: The component "Row Count" (505) has forbidden the requested use of the input column with lineage ID 32.
I don't even know what this means?
thanks,
View 4 Replies
View Related
Dec 28, 2007
Hi,
I'm trying to implement an incremental data pull (Oracle to SQL) based on Andy's blog:
http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
My development machine is decent: 1.86 GHz, Intel core 2 CPU, 3 GB of RAM.
However it seems the data flow task gets hung whenever I test the package against the ~6 million row source, as can be seen from these screenshots. I have no memory limitations on the lookup transformation. After the rows have been cached nothing happens. Memory for the dtsdebug process hovers around 1.8 GB and it uses 1-6 percent of CPU resources continuously. I am not using fast load to insert new records into my sql target table. (I am right clicking Sequence Container 3 and executing this container NOT the entire package in the screenshots)
http://i248.photobucket.com/albums/gg168/boston_sql92/1.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/2.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/3.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/4.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/5.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/6.jpg
The same package works fine against a similar test table with 150k rows.
http://i248.photobucket.com/albums/gg168/boston_sql92/7.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/8.jpg
The weird thing is it only takes 24 minutes for a full refresh of the entire source table from Oracle to the SQL target table.
Any hints,advice would be appreciated.
View 18 Replies
View Related
Dec 12, 2007
Hi all, I am getting the following when trying to import text coloums from execl to SQL server 2005. Any ideas?
Error at Data Flow Task [Destination] Coloums "blar" and "Blar_name" cannot convert between unicode and non-unicode sting types.
Any help would be great.
Thanks
Dave
Dave Dunckley says there is a law for the rich and a law for the poor and a law for
Dirty Davey.
View 3 Replies
View Related
Jan 7, 2008
Hi,
I have SQL Server 2005 Express edition on my machine. On an SSIS project in BIDS, when i drag a "Data Flow Task" to the package it returns the following error:
The designer could not be initialized. (Microsoft.DataTransformationServices.Design)
Does this has anything to do with the fact that i don't have SSIS installed on my machine?
I thought that SSIS was only needed (on my machine) for the runtime, just to run the packages. To create and edit the pachages i need to install SSIS on my machine too? this doesn't makes sense, maybe it's another problem.
Can anyone help me on this?
Thank you,
Rafael Augusto
View 10 Replies
View Related
Jul 3, 2007
I am having problems with the Data Flow task. It does not even show up in the list of items to drop into the SSIS project.
If I go to the Data Flow tab and hit create, I get the follow error. I have tried repairing and reinstalling, but nothing seems to clear up the error. Without rebuilding my machine, is there anyone who knows how to get the Data Flow Task reinstalled properly?
Thanks
Wayne
TITLE: Microsoft Visual Studio------------------------------Registration information about the Data Flow task could not be retrieved. Confirm that this task is installed properly on the computer. ------------------------------ADDITIONAL INFORMATION:TaskHost "{C3BF9DC1-4715-4694-936F-D3CFDA9E42C5}"' is not installed correctly on this computer. (Microsoft.DataTransformationServices.Design)For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=TaskHostNotInstalled&LinkId=20476------------------------------BUTTONS:OK------------------------------
View 1 Replies
View Related
Apr 19, 2006
I am trying to transfer data from one table to the other using a Data Flow Task of SSIS (SQL Server Integration Services)
I am using an OLE DB Source and an OLE DB Destination.
Source Table TABLE1
Column Datatype
ID - Int ,not null
EmployeeName - nvarchar(50), null
Destination Table TABLE2
Column Datatype
ID - Int ,not null
EmployeeName - nvarchar(50), not null
There are 10 rows in TABLE1 of which 2 have null value in EmployeeName column.
If I try to populate all TABLE1 row values into TABLE2 the data flow will fail as TABLE2.EmployeeName will not accept null value.
So I have inserted a FlatFileDestination into the DataFlow and the OLE DB Destination ErrorOutput is set as input to the FlatFile. In the OLE DB Destination Editor the ErrorOutput€™s error property is set to Redirect Row.
When I do this the 8 correct data from TABLE1 will be inserted into TABLE2 and the two rows with null value will be inserted into the FlatFile.
My requirement is this:
I don€™t want any data to be inserted into TABLE2 but I want the two erroneous records to be written into the FlatFile.
Please suggest.
View 2 Replies
View Related
Mar 6, 2007
I am trying to execute a Data Flow Task. There is only one task in the data flow task so far, and that is a Flat File Source task. I also set up a Connection Manager for the file, myfile.txt.
When I try to run the Data Flow Task, I get these errors:
The first problem seems to be with the connection, on the first line. What connection element is missing here? The others seem to be truncation errors. I don't know why that is. I changed the column sizes to match the sizes of database columns. They ARE surrounded by double-quotes, but I have {"} specified as a Text Qualifier in my Connection Manager.
Please, need help!
Error: 0xC001000E at : The connection "{F6513CB9-29E2-4D88-A86B-0EF9DFABE9D6}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Source [2168]: The processing of file "D:myfile.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC02020A1 at Data Flow Task, Flat File Source [2168]: Data conversion failed. The data conversion for column "Column 0" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Error: 0xC020902A at Data Flow Task, Flat File Source [2168]: The "output column "Column 0" (2185)" failed because truncation occurred, and the truncation row disposition on "output column "Column 0" (2185)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC0202092 at Data Flow Task, Flat File Source [2168]: An error occurred while processing file "D:myfile.txt" on data row 1.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (2168) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Source [2168]: The processing of file "D:myfile.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Task failed: Data Flow Task
View 5 Replies
View Related
Feb 29, 2008
Hi!
When I add a Data Flow Task to a package, save it and then close. When I open it again, I get 3 errors and the detail of the Data Flow Task is empty.
I had try to uninstall and install my SQL Server 2005, but the problem continues.
Can some one help me on this?
Sérgio Cardoso
View 4 Replies
View Related
Sep 14, 2015
I am using the Visual Studio for Integration Services. and creating a database.I am trying to download data from a Cube table (SALES_HISTORY), using a Microsoft OLE DB provider for Analsysis services 10.0. in this table, it has visible 2 fields (SALE_TRANSACTION_ID) and (TRANSACTION DATE) but have many hidden fields, such CUSTOMER, PART_NUMBER, etc . when I try to create a query in the OLE DB source editor, I can see all the fields, and be able to create the SQL command.
However when I want to preview it or parse the query, I have the following message: 
Exception from HRESULT: 0x0C0202009 error at data flow task [OLE DB Source [1]]: SSIS Error code DTS_E_OLEDBERROR. an OLE DB error has occurred. Error Code 0x80004005.
an OLE DB record is available. Source: " Microsoft OLE DB Provider for Analysis Services 2008". Hresult:0x80004005 description: Query (1,15) error from the SQL query module the 'Customer' column cannot be found in the 'SALES_HISTORY' table...how to extract the data from the visible and also hidden fields (in excel, are called properties).
View 2 Replies
View Related
Mar 28, 2008
Hi All,
I want to export data from SQL Server2005 to an Excel spreadsheet thru "Data Flow Task". I am using OLE DB for SQL Server for the source connection and a Connection To Excel as my destination source. The Excel spreadsheet (2003) exists and has the first row with column names. I don't have any warnings before trying to execute.
The SQL datable fileds are
i) ID - Int
ii) RefID
iii) txtRemarks - nvarchar(MAX)
iv) ddlWaterLevel - nvarchar(50)
While executing the tasks, I got the error
Error: 0xC0202025 at Data Flow Task, Excel Destination [427]: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "Excel Destination" (427) failed the pre-execute phase and returned error code 0xC0202025.
After analysing I found in the DataFlow --> Excel destination --> Advanced Editor for Excel Destination, the default data type for txtRemarks shows as "Unicode string [DT_WSTR]". But this is supposed to be "Unicode text stream [DT_NTEXT]". Even if I change the data type in the design time, It doesn't accept.
Please do help me out.
thanks
Sanra
View 4 Replies
View Related
Nov 8, 2007
Dear all,
I am trying to executed a packege so that it loads data from from the excel file to the SQL Server Server database.
When I execute it, it prompts the following error message and 1 warning
The excel file has three colums, Week, Item and Value
Error 4 Validation error. Data Flow Task: OLE DB Source [94]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E37 Description: "ORA-00942: table or view does not exist ". Test - GET NW PERF 1.dtsx 0 0
Warning
Warning 1 Validation warning. Data Flow Task: OLE DB Destination [36]: The external metadata column collection is out of synchronization with the data source columns. The column "DAY" needs to be added to the external metadata column collection. The column "TCH_AVAIL" needs to be added to the external metadata column collection. The column "PDROP" needs to be added to the external metadata column collection. The column "P_HR" needs to be added to the external metadata column collection. The column "SFAIL" needs to be added to the external metadata column collection. The "external metadata column "VALUE" (90)" needs to be removed from the external metadata column collection. The "external metadata column "ITEM" (89)" needs to be removed from the external metadata column collection. Not in use - GET NW STATS.dtsx 0 0
Could someone give me a hand here.
Regards,
Ronald
View 1 Replies
View Related
Apr 10, 2008
Hi, this is my first post and I'm relatively new to SSIS so please go easy on me.
Without going into too much detail about it, I've set up a simple SSIS package which does this in a nutshell:
Foreach loop picks up all *.xls files in a given folder
1 - Puts the name of the current spreadsheet into a variable
2 - File System Task copies the current spreadsheet ("abc.xls") to a file called "work.xls"
3 - Data Flow task performs data extraction on "work.xls" and puts it into a SQL server database
4 - File System Task moves "abc.xls" into a "success" folder
Continues with loop - move onto next spreadsheet
This works fine, so long as the spreadsheets all have the same number of columns.
As soon as one of them has a column missing (believe me, this will happen - we're dealing with users here) the package falls over at step 3.
When the package comes across an erroneous spreadsheet, what I'd like to do is move the offending file to a failure folder (making step 4 either a success or failure file move) and carry on with the next one.
I know that you can have an error path (the red line) from any step within the dataflow task, but this doesn't help me because the error lies in the structure of the spreadsheet and not the contents.
I've already come up with a work around whereby each file is moved into the failures folder just after step 2, then moved from the failures folder into the success folder at step 4.
This almost gives me what I want, although of course the package still falls over whenever it encounters a dodgy looking spreadsheet.
Is there any way that I can get the package to do what I'm after?
Many thanks,
Simon
View 1 Replies
View Related
Mar 22, 2007
I am having a problem getting error rows to redirect between an OLE DB Source and an OLE DB Destination when using transactions. Each time I turn on the transaction control I get an error stating:
"[OLE DB Destination [48]] Error: The input "OLE DB Destination Input" (61) cannot be set to redirect on error using a connection in a transaction."
I get the above Error when using MSDTC. I have the data flow inside of a Sequence Container with the transaction option set to REQUIRED and the Isolation Level set to Serializable. I have tried all the Isolation levels.
I have the error rows piped off to a seperate OLE DB Destination. I have also tried using native SQL transactions with Execute SQL tasks to BEGIN, COMMIT or ROLLBACK the transaction. This does not work either. It looks like it works properly when the data flow is successful but using profiler I can see SSIS opens up a seperate process for the BEGIN and then another one with the Data Flow task. When I intentionally fail the Data Flow the Rollback always fails. I made sure I had RetainSameConnection turned on for the Connection I was using.
I am speculating that the Data Flow does not know what to Rollback the actual rows that succeeded or the error rows that are getting piped off.
I am fairly stumped on this one so any help is appreciated.
Thanks
View 4 Replies
View Related
May 2, 2006
I get the following error when trying to import (have tried flat files, Excel & Access). I've searched but have not found a resolution. Any help is appreciated.
Jeff
Validating (Error)
Messages
Error 0xc00470b6: Data Flow Task: The LocaleID 0 is not installed on this system.
(SQL Server Import and Export Wizard)
Error 0xc004706b: Data Flow Task: "component "Source - Test1" (1)" failed validation and returned validation status "VS_ISBROKEN".
(SQL Server Import and Export Wizard)
Error 0xc004700c: Data Flow Task: One or more component failed validation.
(SQL Server Import and Export Wizard)
Error 0xc0024107: Data Flow Task: There were errors during task validation.
(SQL Server Import and Export Wizard)
View 33 Replies
View Related
Jan 17, 2007
Hi,
I developed a custom data flow task in .net 2.0 using Visual Studio 2005. I installed it into GAC using GACUTIL and also copied it into the pipeline directory. This task runs absolutely fine when I run it on my local machine both in BIDS and using the script in windows 2000 environment. However, when I deployed this package into a windows 2003 server, the package fails at the custom task level. I checked the GAC in windowsassembly directory and it is present. Also I copied the file into the PipeLine directory and verified that I copied it into the correct pipeline directory by checking the registry. The version of the assembly is still Debug. I looked up documentation in MSDN but there is very little information about the errors I am seeing.
The error I get is pasted below, Can somebody please help me as I am currently stuck and running out of ideas to fix this problem.
Code: 0xC0047067
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: The "component "_" (2546)" failed to cache the component metadata object and returned error code 0x80131600.
Code: 0xC004706C
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: Component "component "_" (2546)" could not be created and returned error code 0xC0047067. Make sure that the component is registered correctly.
View 6 Replies
View Related
Mar 5, 2008
Hi Everyone-
i am facing a memery problem error while i am running the SSIS package
while i am running the package it show the following Error
In Spend Dataload package: A buffer failed while allocating 70485760 bytes.
--------------------------------------------------------------------------------
In Spend Dataload package: The system reports 54 percent memory load. There are 3747647488 bytes of physical memory with 1694883840 bytes free. There are 2147352576 bytes of virtual memory with 1061253120 bytes free. The paging file has 7328251904 bytes with 5083856896 bytes free.
--------------------------------------------------------------------------------
In Spend Dataload package: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (2718) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
is there anyone know the solution of that problem and please dont tell me to use extra memery or a hardware solution as this option is not available.
thanx
Maylo
View 5 Replies
View Related
Mar 7, 2008
Hi all,
I have a package that does simple exporting from an excel sheet to a table.
I used a Dataflow task with Excel Source and OLEDB Destination Components.
And i created Package configurations for Source and Destination Components.
After than when i execute the package i get the following error.
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLLPL_Config2.dtsConfig".
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLDBCon2.dtsConfig".
SSIS package "ProductDetails_Import.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at ProductDetails_Import, Connection manager "Excel Connection Manager": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Data Flow Task, Excel Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Source" (1) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
SSIS package "ProductDetails_Import.dtsx" finished: Failure.
The program '[2416] ProductDetails_Import.dtsx: DTS' has exited with code 0 (0x0).
I have been trying to troubleshoot the error message given below from last evening.
I have been trying to troubleshoot the error from last morning.
Counld not figure out what is causing this error to occur.
Please help!!!!
Any pointersSuggestions would be highly appreciated.
Thanks & Regards
View 3 Replies
View Related
Mar 12, 2008
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?
Thanks.
View 7 Replies
View Related
Oct 2, 2007
I have a stored procedure that is executed via a sql script task that returns a full result set. I map this result set to a variable or object type. Is there a way to use this variable as a data source in a subsequent data flow task?
A.
View 14 Replies
View Related
Feb 23, 2007
Hi,
I created a package with SQL 2005. The package gets the Access DB and then inserts it into SQL Server.
If I open the package in .NET, I can see the SQL Task and Data Flow Task. The SQL Task has a property sqlstatementsource, which has the necxessary SQL code to create the tables.
How can I tell the SQL Task to recompile the SQL code if I give it another DB name, because the tables differ and don't map in the Data Flow Task
Thanks
View 3 Replies
View Related
Dec 4, 2007
Hi
I have a data flow task. If it completes I should update a flag in the database. So How I can I know if the
data flow task has completed or not.
Thanks
Sai
View 4 Replies
View Related
Feb 5, 2007
I have a table which has been loaded from various source feeds. The SourceId relates to the source name and the SourceCompanyId is the sources primary key for the company. I am basically trying to create one row with all the SourceCompanyIds in my column headers. What data flow tasks would be necessary in SSIS?
The structure of the final table is:
CREATE TABLE [dbo].[Company](
[CompanyId] [int] IDENTITY(1,1) NOT NULL,
[CompanyName] [varchar](75),
[CIK] [varchar](10),
[Ticker] [varchar](10),
[Source1CompanyId] [int] NULL,
[Source2CompanyId] [int] NULL,
[Source3CompanyId] [int] NULL,
[Source4CompanyId] [int] NULL,
[Source5CompanyId] [int] NULL,
[Source6CompanyId] [int] NULL,
CONSTRAINT [PK_Company] PRIMARY KEY CLUSTERED
(
[CompanyId] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
=================================
The table in which contains all the company data
CREATE TABLE [dbo].[SourceCompany](
[SourceId] [int] NOT NULL,
[SourceCompanyId] [varchar](10) ,
[SourceCompanyName] [varchar](75),
[CIK] [varchar](10),
[Ticker] [varchar](10),
CONSTRAINT [PK_SourceCompany] PRIMARY KEY CLUSTERED
(
[SourceId] ASC,
[SourceCompanyId] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
View 5 Replies
View Related
Jan 29, 2008
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task.
I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert.
Thanks
View 6 Replies
View Related
Nov 14, 2007
Hi frns,
I am new to SSIS. I need some help in designing the below dataflow task.
-- Teacher creates several tasks and each task is assigned to multiple students
-- The teacher table contains contains all the tasks created a every teacher
use ods
go
create table teacher
(
yr int,
tid int,
tname varchar(20),
taskid int
)
insert into teacher values(2007,101,'suraj','task1')
insert into teacher values(2007,101,'suraj','task2')
insert into teacher values(2007,102,'bharat','task3')
insert into teacher values(2007,103,'paul','task4')
insert into teacher values(2007,103,'paul','task5')
insert into teacher values(2007,103,'paul','task6')
-- Teacher "suraj" has created 2 tasks
-- Teacher "bharat" has created 1 task
select * from ods..teacher
yr tid tname taskid
============================
2007 101 suraj 1111
2007 101 suraj 1122
2007 102 bharat 2222
-- Students table contains studentid(sid),teacherid(i,e tid ) & taskid
drop table students
create table students
(
yr int,
sid varchar(10),
tid int,
taskid varchar(10)
)
truncate table students
insert into students values(2007,'stud1',101,'task1')
insert into students values(2007,'stud1',101,'task2')
insert into students values(2007,'stud2',101,'task1')
insert into students values(2007,'stud2',101,'task2')
--Note : stud1,stud2 comes under teacher with tid "101"
insert into students values(2007,'stud3',102,'task3')
-- Note : stud3 and stud4 comes under teacher with tid "102"
insert into students values(2007,'stud4',103,'task4')
insert into students values(2007,'stud4',103,'task5')
insert into students values(2007,'stud4',103,'task6')
insert into students values(2007,'stud5',103,'task4')
select * from students
yr sid tid taskid
----------------------------
2007 stud1 101 task1
2007 stud1 101 task2
2007 stud2 101 task1
2007 stud2 101 task2
2007 stud3 102 task3
2007 stud4 103 task4
2007 stud4 103 task5
2007 stud4 103 task6
2007 stud5 103 task4
Now in my target table i need to load the data in a such a way that
use targetdb
go
drop table trg
go
create table trg
(
yr int, -- data should load from teacher.yr
tid int,
taskid int(20),
cnt int
)
Mapping in target column and value to be loaded
==================================================
yr -- teacher.yr
tid -- teacher.id
taskid -- this need to start a new sequence of numbers starting from 1 for each teacher and dont want the task id to be copied as it is.
cntofstudents -- need to count no of students from "students" table for a given teacher and for his assignment
For example for teacherid "101" and taskid "task1" there are 2 students
again for the same teacher "101" and taskid "task2" there are 2 students
For teacher "102" and taskid "task3" there is only 1 student
Similary for teacher "103"
Relation
========
Teacher table | Students Table
yr | yr
tid | tid
After i run the ETL the data should look as follows :
insert into trg values(2007,101,1,2)
insert into trg values(2007,101,2,2)
insert into trg values(2007,102,1,1)
insert into trg values(2007,103,1,2) -- task4 is created by teacher "103" and assigned to 2 students stud4 and stud5
insert into trg values(2007,103,2,1) -- task5 is created by teacher "103" and assigned to 1 student i.e stud4
insert into trg values(2007,103,3,1) -- task6 is created by teacher "103" and assigned to 1 student i.e stud5
Note : If u observer the values in 3rd column of the trg table, instead of directly mapping the taskid we need to generate a separate sequence for every teacher.
BottomLine : for each and every task created by each teacher there should be a unique record along with the count of students in "STUDENTS" table
Can anyone help me out in designing the Data Flow task for this Functionality.
Thanks,
Manu
View 10 Replies
View Related
May 24, 2007
Hi there. I'm trying to learn SSIS, please, help me. I have 2 questions:
1)
There are 2 databases on 2 different servers. I need to get data from Table1(database1) and put it to Table2(database2). But I have to insert rows, which ID is not exists in Table2. How Can I do necessary filter?
2)
In the OLE DB DataSource Component I have used SQL Command(it's simplified):
declare @TmpTable TABLE (WorkCode int not null);
INSERT INTO @TmpTable (WorkCode)
select WorkCode
from Table1
SELECT WorkCode
FROM @TmpTable
SSIS Package works without any exception. But there is no any inserted record in destination table. If I try similar query without temporary table - it works good. Why?
View 7 Replies
View Related
Jul 12, 2007
I have a simple data flow task setup...
2 ADO.NET connection managers, each referencing a DSN pointed to a Unidata database.
2 DataReader sources, each using a single ADO.NET connection managers, running a simple SELECT statement from a table.
I have a Union All transform setup to merge the data and write to a OLE DB Destination (SQL05 database)
When I run the package, each source will validate, but only one will execute. The other source will do nothing. The data source will be colored yellow, and will just sit there. The package will just sit, almost like it is waiting for input.
This behavior is not consistent, however. It varies which data source will hang, pretty much 50-50. About 25% of the time, both sources will execute, and all rows will be written to the destination.
Any help is appreciated.
thanks
View 9 Replies
View Related
Dec 8, 2005
I have a Windows XP X64 machine with SQL 2005 Developer and VS 2005 Team Edition for Architects on it. For the most part it appears that all normal VS and SQL functions are working properly with the exception of SSIS. If I open the developer studio and drag a Data Flow Task onto the design surface I get the message below. I have tried doing an unistall and reinstall of Integration Services as well as a repair on VS 2005 with no success. I've searched the web and newsgroups and can't find any mention of the problem I'm having. Any help greatly appreciated.
View 18 Replies
View Related
Aug 13, 2007
Hi All,
I wanna know if we can have more than one "OLEDB Destination" within a Data Flow Task, I want to use the same data flow and write to two different tables in a database with some changes. If we cannot do this within the same data flow what is the best way to do this.
Thanks
View 3 Replies
View Related
Nov 6, 2007
How can I debug data flow task. From this article (http://www.databasejournal.com/features/mssql/article.php/3567961) and this video (http://www.jumpstarttv.com/Media.aspx?vid=3) I found that when we are executing the task, the data count will be shown along with color coded task but when I debug the package, no count is shown. I have SQL and source and flat file as destination. There is nothing stored in the destination file but the sql script returns the data.
Thanks.
View 6 Replies
View Related
Sep 7, 2007
I was working all day making changes to my 3MB package. I was adding a large number of transforms that were copied-and-pasted from elsewhere in the same data flow task.
All was going well. I even took the time to have SSIS lay out the task again (1/2 hour). Suddenly I started receiving some strange errors:
After the layout, I noticed two stray components 'way off in the upper right corner. I found that one of them had a duplicate name to a component which had been added hours ago. Even after deleting it, I got "duplicate name" errors.
I copied three components in one selection, and when I tried to paste them, got the error "can't initialize component on paste". I tried them one at a time, but got the same error.
I got errors about COM failures due to marshalling to another thread
I then exited Visual Studio and started it again. To my great surprise, the data flow task I was working on was still there, but was completely empty.
Comparing what I'm left with to my last version in source control, I find that the entire pipeline element is missing from the DTS: ObjectData element!
I'm developing a real love/hate relationship with SSIS. It varies from one day to the next. Guess what kind of day this is!
View 3 Replies
View Related
Jan 11, 2006
Hi,
I just wanna ask:
I'm creating an SSIS package, a Data Flow Task. I have used OLEDB Source connected to a SQL Server Destination. Now in my OLEDB Source, I have this SQL statement
SELECT FirstName, LastName, Age FROM Employees WHERE (Age > 10) AND (Age < 95)
But what I want is to have the last name and first name concatenated and in proper case(capitalize first letter of the firstname and surname). I also want to TRIM or remove the blank spaces of the field in my SQL statement. How I be able to do this?
I tried using proper(), trim() and ucase() like in MSAccess but no success.
Please help. Thanks in advance.
View 2 Replies
View Related
