I am receiving the following error message at bootup: "Your SQL Server installation is either corrupt or has been tampered with (could not open SQLEVN70.RLL)."
My Operating System is: Windows XP Media Center Edition Service Pack 2 (build 2600)
I have tried reloading XP and Windows to no avail.
HELP!
In doing a System Restore an error occurred in my SQL 2005. I've researched the thing, and am prepared to uninstall and reinstall SQL Server 2005, however, even tho I am administrator it will not uninstall. It will not reinstall over the previous install that's in place.
When I go through Control Panel to Add and Remove, when I click uninstall SQL Server 2005 it merely flashes a new window for a second and then does nothing. It will not start an uninstall action.
I don't know what to do short of a full XP Pro re-install.
Hi,I have just installed Microsoft Visual Web developer 2005 along with the Microsoft SQL Server 2005. Anyway, I tried to execute the SQL server(in directory ../Microsoft SQL Server MSSQL.1 MSSQL Binn) and it gave me this error:"Your SQL Server installation is either corrupt or has been tampered with (Error getting instance ID from name.). Please uninstall then re-run setup to correct this problem "I have formatted everything in my hard drive before re-installing Windows XP, and there isn't another SQL server except the one I just installed. If anyone could figure out what the problem is, can you please let me know how I could fix it?? Many many thanks.Nelson
View 1 Replies View RelatedHi
I have installed SQLExpress. Whenever I boot my PC (XP Pro SP2) I get the following error just prior to logon: "Your SQL Server installation is either corrupt or has been tampered with (Error generating instance ID from name). Please uninstall the re-run setup to correct this problem."
I have now uninstalled and re-installed twice with no success. SQLExpress seems to be running fine, just this worrying message all the time.
Any help will be gladly appreciated.
Larry_t.
I got the above message when my system started.
I uninstalled everything, but had problems uninstalling the desktop engine. An attempts to reinstall just hung at "Please wait while Windows configures Microsoft SQL Server Desktop engine".
I used the MS recovery tool to remove the desktop engine.
After that running install would progress further thru the above dialog window, but then the progess bar just zipped backward and the dialog box disappeard. Nothing! No message or anything.
How do I clean up this mess?
Thanks,
-- Frank
I logged onto the console for the first time in 45 days and this message was on the login sceen. It goes on to state "please unistall the reun setup to correct the problem.
THis is a clustered setup (active ative) and not inclined to do a unstall. I searched the file system and the file is located in the proper location and same size as teh file for the second instance. The machine was to have some diagnostics for MS and Dell run followed by a reboot. I have postponed all the maint till tomorrow to research the issue and have the Winders guy on hand just in case.
Any ideas on solving this issue.
Thanks in advance for any comments
"Your
SQL Server installation is eigher corrupt or has been tampered with
(could not open SQLEVN70.rll). Please uninstall then re-run Setup to
correct this problem."
What do I do? It says to uninstall/reinstall, but what DO I install? I need a step-by-step procedure to follow to get rid of this.
Although backups and integrity checks show that there is nothing wrong with one of my databases, when I did a "dbcc checkalloc" to one of my databases, amidst all of the information (it was successful as well) was the following message:
Msg 2540, Level 16, State 1
Allocation Discrepancy: Page is allocated but not linked; check the following pages and ids: allocation pg#=40960 extent id=41208 logical pg#=41208 object id on extent=8 (object name = syslogs) indid on extent=0
How do I fix this?
Thanks
Hi,
I am running XP Professional SP2. I have tried to install both SQL 2005 Developer (on this machine) and SQL 2005 Enterprise (on my other laptop), seemingly with success, but get the following error message when I try to connect to the local host using SSMS:
TITLE: Connect to Server
------------------------------
Cannot connect to .
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
There is obviously something I'm doing fundamentally wrong in the install process - I'd be grateful for any help you guys can offer!
Laura
As the title indicates, I'm having this error during installation. It occurs when I try to install
the "Management Studio" part of the program. I've tried a bunch of things like
copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
Please note:
Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
Any solution would be greatly appreciated.
TIA
I'm using SQL 2005 Standard edition with Windows 2000 SP 4. Whenever Windows boots, I get this message 'SQL Server installation is either corrupt or has been tampered with (error getting instance ID from name). I've un-installed and re-installed SQL but I keep getting the same message. What's up with that? Is that a serious condition or should I ignore it? Any suggestions, anybody?
View 1 Replies View RelatedI installed SQL 2005 including backward compatibility, MSDN libraries and SP2 a new Windows 2003 server (chose mixed mode authentication). Installation was successful and I then installed an off the shelf database with Windows authentication which also installed successfully.
I created a new group in AD, added the database users into the group and gave db-owner rights to the group in SQL as advised by the installation guide. However, when I try to open the database it gives an error message saying "Cannot open database.[DBNETLIB][ConnectionOpen(Connect()).] SQL server does not exist or access denied". I also tested it adding an individual user (myself) as a user to no avail.
When I set up DSN in ODBC on my computer I can successfully test the connection but can't run the application. The connection is via TCP/IP.
Any suggestions?
I have both developer and enterprise edition of SQL 2005. I originally installed developer then did an uninstall and tried to install enterprise. Everytime it starts to install I get the following error description:
EventType : sql90setup P1 : installtoolsaction.10 P2 : 0x643 P3 : sqls__installpackageaction__perform P4 : 0x643 P5 : packageengine_installpackageaction.cpp@167 P6 : setup.exe@2005.90.1399.0 P7 : none
It bombs when it tries to install the client tools.
The first time I installed it worked fine but trying to reinstall has caused this error to occur everytime.
I have tried full uninstall/reboots and nothing seems to help. It is coming from an unzipped ISO but I don't see why that would be a problem.
Any Suggestions ?
I get the following error message when trying to open the AdventureWordsDB in VBExpress: "Failed to generate a user instance of SQL Server dut to failure in starting the process for the user instance. The connection will be closed." Can someone tell me what the problem is and how to solve it? Thanks, Ray Holt
View 3 Replies View RelatedOk so I'm using the Management Studio Express and was able to log in and get into the database server, but I had to click the "options>>" button and change database I wanted to connect to from <<default>> to my database on the server or else I get the "cannot open user database, login failed" error message.Then I right click my database and it gives me the "Cannot open user database. Login failed" error message, even though I already connected to the database to login during the connect screen. Also I'm able to interact with the database using SQL QUERIES in the Management Studio, like adding new tables with it, but if I right click the database and click "add table" I get that error.What gives? I know I have permission since I was able to log on, and modify the database using SQL queries but if use the GUI I can't use it. I can't even right-click select "properties" without getting that error. The reason I want to use the GUI is because I want to right click and use the backup feature of the database.My guess is that Management Studio continues to point to the default database(which gives me that message) after I already logged in, so I have no idea how to change the default database that management studio points to, to the one I do have permission to use. Thanks in advance.
View 1 Replies View Relatedhow do I load this file
View 4 Replies View RelatedGood day good people of the forum thanks for the response this is the error message i encountered "an error occured while attempting to validate the setup source files unc path. verify that you have entered a valid unc path."
View 1 Replies View RelatedHello,
Would someone be so kind as to guide me to where I can download this SQLEVN70.rll . I downloaded SQL express 2005 and net framework 2.0 to try and reinstall it to my windows xp pro after I deleted sql server per Microsoft advice due to business contact manager messing up my outlook express.
Is there a better way because every time I try to open Outlook I get the msg. sql server not found and cannot find database for business contact mgr. I removed this application.
Thank you in advance.
Hi all,
I get this error when trying to open folder MSDB in management studio.
I'm running Win 2003, SQL server 2005 64 bit on AMD with two instances of SQL.
Any one that have a solution ? I havent found any thing that works.
If I enable VIA in SQL Server I can't start SQL Service
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
VIA Provider: The specified module could not be found. (Microsoft SQL Native Client)
------------------------------
Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
VIA Provider: The specified module could not be found. (Microsoft SQL Native Client)
I have finally have reporting services up and running. A list of all built-in reports have been populated under Monitoring>Reports but when I click on them I get the results shown in the screen shot attached. Below is the error I get when I try to open any report from my IE browser. I have confirmed SSRS is running on my SQL server. I actually had to start it in order to get the list of reports to populate becasue it was stopped. An error has occurred during report processing. (rsProcessingAborted) Cannot impersonate user for data source 'AutoGen__5C6358F2_4BB6_4a1b_A16E_8D96795D8602_'. (rsErrorIm personatingUser) Log on failed. Ensure the user name and password are correct.
View 4 Replies View RelatedI have a table which I am unable to drop, remove indexes from, and when I select the database from the EM and click on Recalculate get the following error:
When attempting to do a Recalculate from the EM I get: Error 2541 (SQL Server) Table Corrupt object id does not match between extent in allocation page a d sysindexes; check the following extent; alloc pg# 589050 extent# 589096 object id on extent=0 object name=0 object id in sysindexes=1420532094 (object name=MifDEtailOct)
When attempting to remove an index from the table I get: Error 2504 (SQL Server) Table Corrupt index id in alloc page does not match the index id in sysindexes (alloc page#=721664; extentid=721704; index id in alloc=5;index id in sysindexes = 4
When attempting to drop the table from the EM it disappears then when I do a refresh it's back again.
I run a checkdb on the database once a week, but that hasn't resolved the problem.
I also ran the sp_fixindex as outlined in the faq with no relief.
This initially happened on one table and now I'm getting the same error on a second table. I have removed the data from both tables, but can't seem to get rid of them.
These tables originally has a couple of million records in them so they were rather large before I moved the data to a new table.
Truncate also didn't work when I was attempting to clear the table. I had to create an sp to delete a few hundred thousand records at a time.
I would appreciate any suggestions.
Rick Poland
rpolan1@tandy.com
I was successfully able to installing sql server 2005 developer edition all peices except the "Workstation Component, Book Online, Development Tool", the last item in the installation list. It gave errror for bad sql.cab file. Although this developer edition came directly of the box this error came up in many attempts. Upon "Ignore" it gives error 2350.
I am able to run sql server's all the services and able to access it via VS.Net server browser. I can create and change tables etc. but there is no "Management Studio" installed. There is no icon for it either on the desktop or in the Start->SQL Server 2005 menu.
Is it possible to get and copy sql.cab file or entire client component from somewhere else? --Freed download or something? I searched for sql.cab file but it was not in the CD. It could be inside some other file or cmpressed.
Any suggestion.
Hi, I am new to ASP.NET and Visual Web Developer 2005 Express, which I run on Windows Vista. I am currently going through some of the tutorial videos on http://www.asp.net/learn/videos/ . I encountered an error in Lesson 04 and I would have ignored it but it keeps haunting me and now I cannot proceed with the lesson 09 all because of the same error. I would really appreciate it if somebody could help me resolve this because it.
General error text
The database filename can not contain the following 3 characters: [ (open square brace), ] (close square brace) and ' (single quote)
Lesson 4 circumstances
Web.Configis modified to contain the following code just before the closing </system.web> tag:<anonymousIdentification enabled="true"/><profile enabled="true"> <properties> <add name="MyNewProperty" allowAnonymous="true"/> </properties></profile>
Is there anyone can help me to run window when after done with installation, i wana open but i got message" this installation package could not be opened. verify that the package exists and that you can access it. or contact the application vedor to verify that this is a valid Windows Installer package" My comp is running w/ Win home XP. thanks
View 1 Replies View Related
Hi Friends,
Im using .Net2008 and MS SQL Server2005, I Have a web application , i want to connect to the server machine SQL Server, When i run the application im getting the following error.
Im trying to connect to the database from local machine application to server machine database
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My WebConfig File is<connectionStrings>
<add name="NewConnectionString" connectionString="Data Source=sqlserverservername.com;Initial Catalog=Test;UID=User;PASSWORD=Pwd;Integrated Security=True;connect timeout=30" providerName="System.Data.SqlClient"/></connectionStrings>
<appSettings>
<add key="connectionstring" value="Data Source=Sys67;Initial catalog=DB;user id=sa;password=sa;connect timeout=30"/>
</appSettings>
Please Help me to sortout this ISSUe, Its very urgent please
Hi,
I am trying to connect to my SQL Server 2005 but it gave me following error message.
TITLE: Connect to Server
------------------------------
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
So, Please help me to solve this problem.
tnks.
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Thank you...
...cordell...
When I boot up my system (xp)I get the following message ' sqlevn70.rll is either damaged or corrupt...' what should I do?
Facts:1. I am using my account on Godaddy trying to connect to my sql server db.2. I can get into my db using user id and password.3. Godaddy's help file shows this for a connection string: connectstr = "Driver={SQL Server};SERVER=" & db_server & ";DATABASE="
&db_name & ";UID=" & db_username & ";PWD=" &
db_userpassword4. My connection string: "Server=whsql-v09.prod.mesa1.secureserver.net;uid=dbasolutions;pwd=***;database=DB_87972;" & _ "Trusted_Connection=False providerName=System.Data.SqlClient"{password **** out}5. Get error message An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I tried to email Godaddy's help desk with this information. There first response: We do not allow remote connections to our sql server database.There second response was to read the help file!Does anybody have any suggestions? Thanks in advance,bswanson
The 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
why I'm getting this installation error.
Hello everyone:
I am developing a PDA application, everything is fine for me, but when I try to open Sdf DataBase (was generated by the Wizard ADS ), it gives me the following error pda:
Unable to load a DLL SQl Server Compact. Reinstall SQL Server Compact. [DLL name = sqlcese35.sys.dll]
I commented that i reset the hardware pda several times and I have reinstalled these files:
sqlce.dev.ES.wce5.armv4i.CAB
sqlce.repl.wce5.armv4i.CAB
sqlce.wce5.armv4i.CAB
They are located at:
C:Program FilesMicrosoft SQL Server Compact Editionv3.5Deviceswce500armv4i
They say that my PDA have Windows Mobile 6.0, i development in Visual Studio 2005 C#, and the processor is a Marvell in uan IPAQ 114 Classic, my doubts are several:
-- Is this the whole package for this processor?
-- How to i konw that the package it is up to each type of processor?
-- If this package ... What should I do to correct the mistake?
Best regards and thanks in advance.
Albert
Hi Everybody,Can any one tell me how to solve the error 8908(Table Corrupt error). Iam getting this problem every 6 weeks or so. Chain linkage mismatch problem.Help in this regard is highly appreciated.Thanks in advance.
Monu.
I am getting an error every so often on my databases,
I get the following error,
DEscriptor for system table 8 in database not found in hash table,
the databses are unusalble until I stop SQL & shut down
I checked the books on line and it says to stop SQL and shut down,
I have done this and it solves the problem temporaily,
Is there any way that I can permanently fix this,
If anyobne has any ideas I'd appreciate it,
Thanks,
Fin