ERROR: Year, Month, And Day Parameters Describe An Un-representable DateTime In Oracle Provider For OLE DB
May 8, 2008
In my SSIS package I am trying to connect to a database in Oracle 10.2.0.3 using an Oracle Provider for OLE DB.
I get the following error:
at System.DateTime.DateToTicks(Int32 year, Int32 month, Int32 day)
at System.Data.ProviderBase.DbBuffer.ReadDateTime(Int32 offset)
at System.Data.OleDb.ColumnBinding.Value_DBTIMESTAMP()
at System.Data.OleDb.ColumnBinding.Value()
at System.Data.OleDb.OleDbDataReader.GetValues(Object[] values)
at System.Data.ProviderBase.DataReaderContainer.CommonLanguageSubsetDataReader.GetValues(Object[] values)
at System.Data.ProviderBase.SchemaMapping.LoadDataRow()
at System.Data.Common.DataAdapter.FillLoadDataRow(SchemaMapping mapping)
at System.Data.Common.DataAdapter.FillFromReader(DataSet dataset, DataTable datatable, String srcTable, DataReaderContainer dataReader, Int32 startRecord, Int32 maxRecords, DataColumn parentChapterColumn, Object parentChapterValue)
at System.Data.Common.DataAdapter.Fill(DataTable[] dataTables, IDataReader dataReader, Int32 startRecord, Int32 maxRecords)
at System.Data.OleDb.OleDbConnectionInternal.GetSchemaRowset(Guid schema, Object[] restrictions)
at System.Data.OleDb.OleDbConnection.GetOleDbSchemaTable(Guid schema, Object[] restrictions)
at System.Data.OleDb.OleDbMetaDataFactory.PrepareCollection(String collectionName, String[] restrictions, DbConnection connection)
at System.Data.ProviderBase.DbMetaDataFactory.GetSchema(DbConnection connection, String collectionName, String[] restrictions)
at System.Data.ProviderBase.DbConnectionInternal.GetSchema(DbConnectionFactory factory, DbConnectionPoolGroup poolGroup, DbConnection outerConnection, String collectionName, String[] restrictions)
at System.Data.OleDb.OleDbConnection.GetSchema(String collectionName, String[] restrictionValues)
at Microsoft.DataWarehouse.Design.OleDbSchema.GetSchema(String collectionName, String[] restrictionValues)
at Microsoft.DataWarehouse.Design.DataSourceConnection.GetSchemaTable(DataTable& dataTable, String collectionName, String[] restrictions)
at Microsoft.DataWarehouse.Design.DataSourceConnection.ConvertGetSchema(DataTable& dataTable, Guid schemaEnum, Object[] restrictions)
at Microsoft.DataWarehouse.Design.DataSourceConnection.GetSchemaTable(DataTable& dataTable, Guid schemaEnum, Object[] restrictions)
at Microsoft.DataTransformationServices.Design.ComboBoxWithTables.GetTableInfos(DataSourceConnection dataSourceConnection, String connectionName)
at Microsoft.DataTransformationServices.Design.ComboBoxWithTables.FillTableOrViewComboBox()
Why this is not working for 10.2?
The same package works fine for Oracle 8.1.7
THANKS FOR YOUR HELP!
hai friends, iam doing a project in .net and using sql server. i need to compare only month and year part in datetime type to retrive data. 1)retrive unique year and its months available in the database. like may 2008 apr 2008 mar 2007
I have a table with a datetime field 'TheDate'. Currently dates are stored as 'mm-dd-yyyy 00:00:00'. Is there a way to get just the month, day and year parts, '01/01/2008' into the field without changing the field data type to varchar? I'm asking because when I do this:
update TheTable set TheDate = substring(convert(varchar,TheDate,101),1,10)
I'm still getting a date in the format 'mm-dd-yyyy 00:00:00' stored in the table. I'd like to be able to lose the time portion, but I'd like to be able to keep the datetime datatype for date math purposes. Can it be done?
Hello All,I've got a DATETIME field, and it includes hour:minutes:second data. I want to do selects where I can simply match on the month, day and year. For instance, something like this:SELECT * FROM QuizAttempts WHERE DateTimeTaken = '1/12/2006'And have it match anything that was taken that day, regardless of *when* it was taken. Any suggestions?Thanks! -Josh
i have some classes that I want to group by month/year (note:i dont need the day of the month) how do i wirte my sql so it only gives me the dictinct groups month/year of the classes I have so that it comes out like so.. 11/2006 12/2006 1/2007 3/2007 i try with my sql below but i cant get the groups th come out in order. i dont think it sees it as a date value. dbo.classgiven.classdate date of the class.thank you all SELECT DISTINCT { fn MONTH(dbo.classgiven.classdate) } " + "/" + "{ fn YEAR(dbo.classgiven.classdate) } AS monthyear,{ fn MONTH(dbo.classgiven.classdate) } AS monthcode FROM dbo.classT INNER JOIN dbo.classgiven ON dbo.classT.classcode = dbo.classgiven.classcode WHERE (dbo.classT.discount = '-1') AND (dbo.classT.coned IS NOT NULL)", conNorthwind )
Does anyone know of a way to use a funtion for returning records based on fiscal reporting periods like Quickbooks uses for example "This Month", "Last Month", "This Quarter", "Last Quarter", "This Year", "Last Year". While I realize that I can create a very long date time parsing routine for this but it is not very elegant or useful. I thought there might be a way to do this already with an existing function.I have created a stored procedure that I pass a @ViewRange Parameter to and it returns the records that I want but I need this ability in several procedures and wanted to turn it into a stored procedure.IF @ViewRange = 'This Month' SELECT TOP 20 Customer.LastName AS Customer, SUM(Sales.AmtCharge) AS Amount FROM Customer INNER JOIN Sales ON Customer.CustNo = Sales.CustNo WHERE (MONTH(Sales.InvDate) = MONTH(CURRENT_TIMESTAMP)) AND (YEAR(Sales.InvDate) = YEAR(CURRENT_TIMESTAMP)) GROUP BY Customer.LastName ORDER BY SUM(Sales.AmtCharge) DESC;IF @ViewRange = 'Last Month' SELECT TOP 20 Customer.LastName AS Customer, Sum(Sales.AmtCharge) AS Amount FROM Customer INNER JOIN Sales ON Customer.CustNo = Sales.CustNo WHERE(MONTH(Sales.InvDate) = MONTH(CURRENT_TIMESTAMP) - 1) And (YEAR(Sales.InvDate) = YEAR(CURRENT_TIMESTAMP)) GROUP BY Customer.LastName ORDER BY Sum(Sales.AmtCharge) DESC; Any ideas?
I have the following script that calculates Sales by month and current year.
We run a Fiscal year from April 1st thru March 31st.
So April 2012 sales are considered Fiscal Year 2013.
Is there a way I can alter this script to get Fiscal Year Totals?
select ClassificationId, YEAR(inv_dt) as Year, cus_no, isnull(sum(case when month(inv_dt) = 4 then salesamt end),0) as 'Apr', isnull(sum(case when month(inv_dt) = 5 then salesamt end),0) as 'May', isnull(sum(case when month(inv_dt) = 6 then salesamt end),0) as 'Jun', isnull(sum(case when month(inv_dt) = 7 then salesamt end),0) as 'Jul',
[Code] ....
Data returned looks like the following.
ClassificationID Year Cus_no Apr May June .... 100 2012 100 $23 $30 $400 100 2013 100 $40 $45 $600
What I would need is anything greater than or equal to April to show in the next years row.
I have three web form controls, a ddl that contains the day, another ddl that contains the month and a textbox that contains the current year. To send the date chosen by the user to the database, I join the three web form control values so that the resultant string is ‘day/month/year’ thus:
And the resultant string is: dd/mm/yyyy, for example 30/08/2004. But the problem is if the user does not select any day or any day and month, then the resultant string is for example; 00/08/2004 or 00/00/2004, but the problem is the database does not accept this format as datetime. How can I do it?
I want the user has the possibility to chose as well only the month and year, and as well only the year. Is it possible to send to the database the datetime format with only the month and year, or only the year?
I've written sql code which takes a date and finds the Last Day of the Month one year ago. For example, it takes the date '2015-04-17' and returns the date '2014-04-30'. The code works fine in a query. Now I'm trying to turn this into a function. However, when I try to create the function I get the error:
Operand type clash: date is incompatible with int
Why is this error being returned?
Here is my function:
CREATE FUNCTION dbo.zEOM_LY_D(@Input Date) RETURNS date AS BEGIN; DECLARE @Result date; SET @Result = convert(DATE, DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,dateadd(m, -11, @Input)+1),0)),101) RETURN @Result; END;
I'm using PHP with SQLServer2k to create a page containing monthly counts of episodes at a facility occurring between two user selected month/year combinations. For instance, the user could select 10/2003 and 2/2004 and facility X and get a line for each month showing the count of episodes occuring in that month.
The problem is that the episode date is stored in three integer fields (epiday, epimonth, epiyear) and I'm having a terrible time getting them into a format where I can use them in a between statement.
I've tried evaluating the parts of the episode date seperately like:
where (epimonth>=10 and epiyear=2003) or (epimonth<=2 and epiyear=2004)
and that works, but what happens when someone wants to see from 10/2002 to 2/2004?
I am using SQL Server 2005 on a 64 bit AMD processor machine using the Oracle 10.0.2.0.2.0 and SELECT OPENQUERY will return results from my Oracle table. When I try to do an UPDATE OPENQUERY I get this error message
Msg 7333, Level 16, State 2, Line 1 Cannot fetch a row using a bookmark from OLE DB provider "OraOLEDB.Oracle" for linked server "ORADB".
the same UPDATE OPENQUERY works on SQL Server 2000 using the Oracle 9 client. The provider is configured with Inprocess turned on. Any help would be appreciated.
Does anyone know how I can get last day of month if I pass a function a given month and and given year. @Month = 2 @Year = 2004 The result I would need is 29 because there are 29 in the month of February in the 2004. Any help on this is greatly appreciated. Kellie
I have an ODBC connection setup for Oralce RDB. This works fine in say MSAccess. Now I would like to add a SQL Server Linked Server to this ODBC driver (it is for RDB not regular Oracle), but I am not able to get this to work. What is the Provider String and Location / Catalog for using this type of ODBC? I setup DSN as 'name', Provider String as 'UID=user;PWD=pass;' and it seems it tries to connect but gives an error. "%SQL-F-SCHNOTDEF, Schema USER is not defined"
I have an issue using parameterised reports connecting to Oracle using "ODBC" and "Microsoft OLE DB Provider for Oracle" using parameteried reports. The following error is generated "ORA-01008 not all variables bound (Microsoft OLE DB Provider for Oracle)" and a similiar one for ODBC. It works fine for simple reports. Do these 2 drivers have issues passing parameters for a remote Oracle query? Thanks.
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
I've been searching around for a while now and slowly been making progress but I've finally hit a road block and I'm wondering if anyone else has ever gotten this to work. I'm using SS SP2 and the Microsoft OLE DB Provider for Oracle.
I have a lookup task in the data flow. The lookup table is in Oracle and it works fine as long as I don't check the "Enable Memory Restriction" box on the Advanced tab. As soon as that box is checked, the task will throw an error when I try to run it. I need to check it though to get to the Modify SQL Statement. Here is what I do: Create new Lookup task Set the Oracle OLE DB connection Use the following SQL for the reference table source: SELECT COST_CENTER_ID, COST_CENTER_NB, start_dt, end_dt, decode(SIGN(TO_NUMBER(TO_CHAR(START_DT,'MM'))-9),-1, TO_CHAR(START_DT,'YYYY'), 0, TO_CHAR(START_DT,'YYYY'), 1, TO_CHAR(START_DT + 365,'YYYY') ) START_FY, decode(SIGN(TO_NUMBER(TO_CHAR(END_DT,'MM'))-9), NULL, decode(SIGN(TO_NUMBER(TO_CHAR(SYSDATE,'MM'))-9), -1, TO_CHAR(SYSDATE,'YYYY'), 0, TO_CHAR(SYSDATE,'YYYY'), 1, TO_CHAR(SYSDATE + 365,'YYYY') ), -1, TO_CHAR(END_DT,'YYYY'), 0, TO_CHAR(END_DT,'YYYY'), 1, TO_CHAR(END_DT + 365,'YYYY') ) END_FY FROM DIM_COST_CENTER
Then I go to the columns page and connect 1 field from the input column to the lookup column. Then click ok and it runs fine. However, now I go to the advanced page and click the Enable Memory Restriction (at this point is where the problem occurs). As soon as the memory restriction is checked, the thing throws errors: [Lookup [4732]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E14 Description: "ORA-00933: SQL command not properly ended ". Then if I go in and Modify the SQL Statement into the Oracle syntax by removing the word AS and the [ ]'s it will get a new error: select * from (SELECT COST_CENTER_ID, COST_CENTER_NB, start_dt, end_dt, decode(SIGN(TO_NUMBER(TO_CHAR(START_DT,'MM'))-9),-1, TO_CHAR(START_DT,'YYYY'), 0, TO_CHAR(START_DT,'YYYY'), 1, TO_CHAR(START_DT + 365,'YYYY') ) START_FY, decode(SIGN(TO_NUMBER(TO_CHAR(END_DT,'MM'))-9), NULL, decode(SIGN(TO_NUMBER(TO_CHAR(SYSDATE,'MM'))-9), -1, TO_CHAR(SYSDATE,'YYYY'), 0, TO_CHAR(SYSDATE,'YYYY'), 1, TO_CHAR(SYSDATE + 365,'YYYY') ), -1, TO_CHAR(END_DT,'YYYY'), 0, TO_CHAR(END_DT,'YYYY'), 1, TO_CHAR(END_DT + 365,'YYYY') ) END_FY FROM DIM_COST_CENTER) refTable where refTable.COST_CENTER_NB = ?
Now when running I get the error:
[Lookup [4732]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E5D. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E5D Description: "Parameter name is unrecognized.". Followed by: [Lookup [4732]] Error: OLE DB error occurred while binding parameters. Check SQLCommand and SqlCommandParam properties.
This is where I get stuck. I've gone into the XML and looked through everything and it all seems to match up in terms of variables lineage ID's and such, but I can't see any place to set the parameter name, which should be 0 since it is OLE DB. When I click the Enable Memory Restriction, the only difference I can notice in the XML is that the cachetype line changes from 0 to 2.
<property id="4738" name="CacheType" dataType="System.Int32" state="default" isArray="false" description="Specifies the cache type of the lookup table." typeConverter="CacheType" UITypeEditor="" containsID="false" expressionType="None">2</property>
Has anyone ever got parameters to work with Oracle and a lookup? Any work arounds? I have used a Merge Join with Conditional Split successfully, but I have about 5 other lookups that have to be done and it will be a killer and lots of work to try and re-sort for each merge join and conditional splits for each of them. Looking for any help with making the lookup work or some nicer work arounds.
Hi every one, I have a database table and currently users may retrieve records for a specified date range by providing the start and end dates and then records between those dates provided are retrieved. For example if users wanted to view all records entered in april, they would have to select 04/01/2007 as the start date and then 04/30/2007 as the end date. The records for april would then be displayed in a gridview. How can configure my sql query such that instead the user selectes a month from a dropdownlist of 12 months. I would love a user to just select the desired month from a list instead of selecting start and end dates. Eg if they are intrested in a report for june, then they should just select june from the list instead of specifying the start and stop dates. HOW can i achieve this.
I have designed a DTS package which will migrate a view from Sqlserver 2000 to Oracle.My package is using Microsoft OLEDB provider for Oracle driver for connecting to oracle.Im able to execute this package on the my system ie on the system where sqlclient is installed(Oracle client is also installed on my machine) .But when im doing it on the server im not able to do it.The Connection to Oracle Fails. I wanted to know in order to connect to Oracle from the server,is it necessary that Oracle has to be installed on the server?.If yes, is it enough if i install oracle client on the server or Oracle Server version has to be installed on Server.
Microsoft SQL Server Management Studio 9.00.2047.00 Microsoft Analysis Services Client Tools 2005.090.2047.00 Microsoft Data Access Components (MDAC) 2000.086.1830.00 (srv03_sp1_rtm.050324-1447) Microsoft MSXML 2.6 3.0 4.0 6.0 Microsoft Internet Explorer 6.0.3790.1830 Microsoft .NET Framework 2.0.50727.42 Operating System 5.2.3790
I have the OraOLEDB.Oracle provider installed to the (C:oraclexe) directory.
I am having problems querying from linked oracle server. When i setup oracle as a linked server and purposely enter an incorrect password the query i run tells me i have an incorrect password. So it at least knows that. when i set the correct password and run a query I get this error:
(i replaced the real server name with "someServer".)
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer".
i have to input month/year can u tell me what would the datatype of that column? - should it be datetime or just month/year? what would be the datatype?
i have to make function called getQuantityByMonth that when given the following inputs: input: campaign,begin month/year, end month/year
returns the item sales for the items in a campaign with the following column headers...
hi! i have this following query:Select DATEADD(YEAR, -2, @sDate),(dateadd(dd,-(day(dateadd(yy,1,@sDate))),dateadd(yy,1,@sDate)))..the results of these are:2005-01-01 ,2007-12-31 but i want 2007-12-31 to be 2005-12-31..how can i do that using dateadd function?
Basically the error that I am getting is in our test automation when running as non-admin on the box (regular user). We use .Net C# SQLConnection class to connect to SQL express 2005 impersonating with admin credentials. After getting the connection we try to execute a select command and it some time fails with following error: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The handle is invalid.) at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) at System.Data.SqlClient.TdsParserStateObject.ReadBuffer() at System.Data.SqlClient.TdsParserStateObject.ReadByte() at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader()
This happen only in the non-admin scenario mentioned above. Any idea what is triggering this?
Hi,The problem here in hand is comparing the month & year ranges rather than the entire date. I am passing a start month and start year along with the end month and end year, now the query that i have written does not seem to be appropriateMy Query:MONTH(Date_Added) BETWEEN @StartMonth AND @EndMonthAND YEAR(Date_Added) BETWEEN @StartYear AND @EndYearFor some reason this works fine if i specify the startmonth as 1 and endmonth as 12, whereas if i specify 1 and 1 it doesnot work. Can anyone help me by refining my query so that i can search a particular date within mm/yyyy and mm/yyyy. Thanks in advance.Santosh
Hi i have a where clause which i think i need to change
i currently have the code below but dont think it right i think it needs to be (O_Date) between @month1 @year AND @month2 @year2, but not sure how this should be done?
WHERE MONTH(O_Date) Between @month1 AND @month2 and YEAR(OW.O_Date) Between @year AND @year2
My data is mainly updated each month. Most of my tables have a month and year column. I have many statements such as this when I need to join tables:
SELECT equity FROM vMonthlyFirmSummary WHERE MonthlyInputs.year = vMonthlyFirmSummary.year AND MonthlyInputs.month = vMonthlyFirmSummary.month
Is this bad database technique? Do you think instead I should try to create a string key field such as 2007-01 (Year - Month)? Please give any insight on how to make the DB simpler. Thanks.
