Hi! I created a stored procedure which uses the xp_cmdshell.
EXEC XP_CMDSHELL 'DIR \SERVERNAMEFOLDER'
If I use it on a local computer it works fine but if I try to access computer on a network, it returns "Access Denied".
I have read a lot of articles which says check the permissions. Can anyone tell me what are those permissions and how do I check them?
Thanks! I would appreciate any help on this...
Hi,
Inside a stored procedure I'm executing BCP command through
exec xp_cmdshell @str
But when i put this line inside stored procedure, it generates a Output for that.
like how many files copied etc. this output is actually of bcp command.
How can i suppress it's output. ?
My sp is generating two resultsets.
Thanks,
Sandeep
Hi allI have a stored procedure that has the lineEXEC master..xp_cmdshell 'dtsrun /Stestjob1 /N testdts /E'If I run the SP from an access front end as a trusted user or from ascheduled job it runs fine and exectues the dts.If I run the stored procedure using VB6 as a standard connection the dtsjobwont run. I get back Execute permissions denied on xp_cmd.. on databasemasterdb_connect_string = "Provider=SQLOLEDB.1;Persist Security Info=False;UserID=test_connect;PWD=pw1test;Initial Catalog=testdb;Data Source=" &database_name....Set cmd = New ADODB.Commandcmd.ActiveConnection = db_connect_stringcmd.CommandType = adCmdStoredProccmd.CommandText = "testStoredProcedure"cmd.ExecuteDo I need to give test_connect permisions to run the test stored procedure.I hoped that because the VB called a stored procedure and the connection hadpermissions to execute the SP then it would be the SP that called thexp_command....can anyone tell me the accepted way to do thismany thanksAndy
View 2 Replies View Relatedsome one can tell if i can make a "where" clause inside the BCP , when i say : select * FROM tbl where flag=N , usually the where flag='N' works with the ' ' , but it gives no error when save the store procedure without it ' ' saves nicely the SP,
but
like this it saves well "SELECT * FROM tbl where flag=N" and
when i execute it, give a sql statement error "Error = [Microsoft][SQL Native Client][SQL Server]Invalid column name N."
i dont now , any help
PS: perhaps at the end of the BCP ---> -c -T , must have some more or less
Hi All,
I am writing a stored procedure which accepts 2 parameters -
Current version(.....for example V53)
UpgradeTo version(.....for example V61)
Using these 2 inputs --I need to create a directory V61 by copying directory V53
for this specific example it would go like this-------------
exec master.dbo.xp_cmdshell N'Xcopy c:V53 c:V61 /i'
Now if i want to make a dynamic query for this ...
how do i go about it?
declare @folder1 varchar(255)
declare @folder2 varchar(255)
declare @xcopytext varchar(255)
SET @folder1 = 'V53'
set @folder2 = 'V61'
set @xcopytext = N'Xcopy "c:@folder1" "c:@folder2" /i'
exec master.dbo.xp_cmdshell @xcopytext
This gives the error :
File Not Foundfolder1
How do I integrate dynamic query with XCopy functionality ?
Hi,
i Exected...
Exec Master..xp_cmdshell 'bcp "DBCC CHECKDB" queryout "c:Test.txt"'
i've tried through this SQL script in Query Analyser but.
the Result is not storing in the Text file, and getting output this
---------------------------------------
Password:
NULL
Do you want to save this format information in a file? [Y/n]
Starting copy...
SQLState = S1000, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]BCP host-files must contain at least one column
NULL
BCP copy out failed
NULL
----------------------------------------
Please help me, Successful Query.
Thanks <b>Nosepicker</b>
u r solutions is right...
Which u gave the Query...
Exec Master..xp_cmdshell 'osql -Uuserid -Ppassword -Sservername -ddatabase -Q"DBCC CHECKDB" > "c:Test.txt"'
i've Executed, It's work's fine in the VB6,VB.Net,ASP.Net...
I've done project, i've facility to take Backup and Restore the Database...
I have two SQL Server 2000 (one is localhost, one is remote with VPN IP 192.168.5.4).
I can select * from [192.168.5.4].db.dbo.test but I can't exec [192.168.5.4].db..spAdd in localhost.
These select and sp is OK for 1 or 2 week without any problem,but it didn't work one day.
Can some one explain why?
Hello,
I am trying to create a directory containing the date and then copy all the files in the current directory to it.
If I run the T-SQL script found below within Query Analyser it works fine (directory is created and files are copied in to it).
But if I run it as SQL task within DTS, only the directory is created. The files are not copied in to it!?!
I thought it maybe a permissions problem, but the SQL Server/Agent account is a local administrator and has sysadmin role with SQL Server.
I would be grateful of any assistance in this problem.
Thanks in advance,
Chris.
SQL:
declare @directoryname varchar(200)
declare @doscmd varchar(255)
select @directoryname = 'e:Audit_table_archive' + rtrim(cast(day(getdate())as char)) + rtrim(cast(month(getdate())as char)) + rtrim(cast(year(getdate())as char))
select @doscmd = 'mkdir ' + @directoryname
exec master..xp_cmdshell @doscmd
select @doscmd = 'copy e:Audit_table_archive*.* e:Audit_table_archive' + rtrim(cast(day(getdate())as char)) + rtrim(cast(month(getdate())as char)) + rtrim(cast(year(getdate())as char)) + '*.*'
exec master..xp_cmdshell @doscmd
does anyone know how to execute a FTP command through sql server 7? I am creation a table and need to ftp the result set. I have it currently creation the table, turning it into a CSV txt file and placing it in a directory. I have to then manually ftp the txt file. I want to automate this process but I cant get the FTP command to execute throught the xp_cmdshell. It will work at the DOS prompt though so I know the syntax is correct. Any sugetsions would be appreciated.
-Nathan
hi everybody
My requirement is, I have to transfer database backup files from one server to another server to take tape backup. Generally in my backup folder there will be 4days backups. I want to schedule a job so that after database backed up, today’s backup file only copied to the other server. I wrote following code, upto xp_cmdshell every thing is working fine.
But xp_cmdshell statement is giving error. I have to use variable value with sp_cmdshell. Please give me the solution for this.
declare @year1 as varchar(4),@month1 as varchar(2),@day1 varchar(2),@filename varchar(40)
set @year1=ltrim(str(year(getdate())))
if month(getdate())<10
set @month1='0'+ltrim(str(month(getdate())))
else
set @month1=ltrim(str(month(getdate())))
if day(getdate())-1 <10
set @day1='0'+ltrim(str(day(getdate())-1))
else
set @day1=ltrim(str(day(getdate())-1))
set @filename='EMPTest_db_'+ @year1+@month1+@day1+'*.bak'
xp_cmdshell @a
thanks
Keerthi
I am trying to run a Visual Basic Script using the xp_cmdshell stored procedure. When I try to run the file, the MS Script Debugger application is started.
I run the script like this: "xp_cmdshell 'D:ScriptFilesSpaceMail.vbs'"
I can run it from the DOS prompt successfully, but not from Query Analyzer. Does anyone have any suggestions on how to prevent the MS Script Debugger from running?
Chris
Hi,
I am trying to run bcp with xp_cmdshell inside a trigger. Whenver I update table the server is hanging. It creates the file in specified location but of ZERO size and I cannot delete it unless I stop SQL server service.
The smae code runs from a stored procedure without any problem.
Can you pl tell me if there are any LIMITATIONS with xp_cmdshell and Trigger.
Thanks
sekhar
Hi!!!
Can someone help me?
How can I get the result of following execution in some stored procedure, and work with it:
exec xp_cmdshell 'dir c:'
Thanx in advance
Laert
Hi,
while using XP_cmdshell for renaming a file , can I concatenate the current date to the file?
Ramam
Hi,
What is best way to compare two files and get the most recent one using xp_cmdshell?
Thanks
TT
Hi,
I am trying to execute this command.
use master
exec xp_cmdshell..'dir estserverest_dataInventory_Files*.txt /b'
I am getting the following error..
output
------------------------------------------------------------------------------Logon failure: unknown user name or bad password.
I am logged on as 'sa' for that server.
Any suggestion on how to resolve this?
Thanks in advance.
Hai ,
I beleive this is simple question but I have problem using this command
I was trying to delete contents of a temp folder thru TSQL.
Correct me if wrong
For example
xp_cmdshell " del c:emp*.*"
This is leading me to prompt 'Are you sure to delete Y/N'.
How do I write a command to say Y.
I want to schedule this every week. Is there any other way to do this task
like using AT command ,etc.
Thank you in advance
Surya
Hi !
I am trying to use xp_cmdshell
---
xp_cmdshell 'dir abcc$'
---
where abc is host name
and C$ is shared name
I get the following error message
"Logon failure: unknown user name or bad password."
I execute the same command at the dos prompt , I get the directory listing
Any suggestions??
Thanks.
KMM
Hi Guys,
i am trying to run an .exe file from queryanalyzer for my testing.I am using the following command
exec master..xp_Cmdshell 'C:extEXEproject1.exe -SCHEETAH -Uvijay -Pbell'
CHEETAH is my server name
User :vijay
pwd:bell
the problem is its running forever in QueryAnalyzer,when i tried to run the
same thing from dosprompt its executing fine.
Please help me in this
thanks for any help
SQL 7.0
I have given a non sa user permissions to run xp_cmdshell via his NT logon. When he runs it and does a "dir" of the server it works. When he trys to do a "dir" of his own machine it comes up with "Logon failure unknown user name or bad password".
SQL Agent is running under a domain admin account. I have placed SQLAgentCmdExec in the servers local administrators group. I have de-selected the option from SQLAgent propertiesJob System which restricts non sa users executing CmdExec stuff. I did attempt to Reset Proxy Account and Reset Proxy Password. When I clicked on these it just gave me message that the account and password had successfully been reset without asking me for username, password or domain.
Hello, friends,
This is probably not a question for DBA forum, but may be someone knows the answer.
In the stored procedure I'm using xp_cmdshell command to copy file from one dir to another.
How I can receive any indication what the process succeded?
xp_cmdshell return 1 or 0 if the stored procedure was invoked,
I would like to receive an indication that the file was copied.
How to create directory and file using xp_cmdshell..?
Thanks,
Harish
I tried to use the external procddure - xp_cmdshell - to copy a file from a local drive to a network drive, but failed. Yet the attempt succeeded if I tried to copy a file from one place to another in local drive.
It seems that SQL Server 6.5/7.0 did not recognize any network drive.
I greatly appreciate your help/assistance and/or any hint(s). Thanks a lot
Hi there!
Is it possible to supply variable for the xp_cmdshell parameter?
here's an example:
declare @@okay char(20)
select @@okay = "dir c:mssqlinn"
exec master..xp_cmdshell @@okay
but this doesn't work. is there any workaround on this? instead
of writing a new extended sp to cater for this.
thanks in advance.
dion
I was able to run DTS using xp_cmdshell. In my dts I have 3 global variables which I would like to pass. Can I pass a variable values using xp_cmdshell?
xp_cmdshell 'DTSRUN /S ServerName /U user/P pass /N "DTS_Name" '
Hi,
I need to do FTP using a FTP script...here is the syntax that i am using
ftp -s:c: empftpcmd.txt > c: emplog.txt
when i run it thru the command line, log.txt file has the following
==================================================
ftp> Connected to 9.999.99.999.
open 9.999.99.999
220-YYYY1 XXX FTP CS V1R2 at XXXXXX.XXXXXX.XXX.COM, 16:55:07 on 2004-06-15.
220 Connection will close if idle for more than 5 minutes.
User (9.999.99.999:(none)):
331 Send password please.
230 USERNAME is logged on. Working directory is "USERNAME.".
ftp> Invalid command.
ftp>
ascii
200 Representation type is Ascii NonPrint
ftp> get 'XXX.YYY.ZZZ.ACCOUNT' c: empXXX.YYY.ZZZ.ACCOUNT.txt
200 Port request OK.
125 Sending data set XXX.YYY.ZZZ.ACCOUNT FIXrecfm 22
250 Transfer completed successfully.
ftp: 1172544 bytes received in 3.31Seconds 353.82Kbytes/sec.
ftp> quit
221 Quit command received. Goodbye.
=================================================
but when i run it from inside a query...using
declare @cmd varchar(1000)
select @cmd = 'ftp -s:c: empftpcmd.txt > c: emplog.txt'
exec master..xp_cmdshell @cmd
the log.txt file has
=================================================
User (3.172.28.153:(none)): open 3.172.28.153
Invalid command.
ascii
get XXX.YYY.ZZZ.ACCOUNT' c: empXXX.YYY.ZZZ.ACCOUNT.txt
quit
=================================================
why is this differnece? what can i do so that i get full details in the log file.
please help.
thanks
rohit
Where should i read up on using
dos commands in conjunction with the xp_cmdshell extended stored procedure..
I need to manipulate file names....
move copy take off ... parts of the filename and replace... them...
etc... any good sites or topics... so that I can learn how to do this...
thanks...
jonathan
Hi All,
I've recently installed SQL Server 2005 and now trying to enable xp_cmdshell through SQL Server 2005 Surface Area Configuration. However, I am getting the following error:
User does not have permission to perform this action.
You do not have permission to run the RECONFIGURE statement.
I am logged in as "sa".
How can I make it work?
Thanks.
how to enable xp_cmdshell
View 2 Replies View RelatedBasic problem:
When xp_cmdshell interacts with FTP it doesn't log the FTP return codes.
History:
I found Nigel Rivett's T-SQL FTP scripts http://www.nigelrivett.net/ and concatenated them together with some modifications so I could have a process that actually errors when an FTP fails.
The process FTP's a file, disconnects, and then reconnects to do a dir and then select from the returned listing to see if the file name exists.
I wanted to review the initial log from the put and check for a valid FTP return code of 250 that says "Transfer completed successfully"
Log Snippets:
A normal FTP log shows:
ftp> put foo 'mainframe.node.structure.foo'
200 Port request OK.
125 Storing data set MAINFRAME.NODE.STRUCTURE.FOO
250 Transfer completed successfully.
ftp: 7972888 bytes sent in 99.63Seconds 80.03Kbytes/sec.
ftp> quit
221 Quit command received. Goodbye.
xp_cmdshell log shows (with FTP debug on) shows:
7 put foo 'mainframe.node.structure.foo'
8 PORT 10,99,11,16,7,30
9 ---> STOR MAINFRAME.NODE.STRUCTURE.FOO
10 ---> quit
11 QUIT
12 (null)
As you can see, the return codes and some other messages are missing.
I've messed around with various options and can't seem to get any return codes in the log at all.
Any ideas?
I need to kill some user session that i get from below query output
xp_cmdshell 'netstat -an | find /i "est"'
output: -
TCP 0.0.0.47:1099 0.0.0.39:139 ESTABLISHED
TCP 0.0.0.47:1433 0.0.0.104:2961 ESTABLISHED
TCP 0.0.0.47:1433 0.0.0.104:3012 ESTABLISHED
TCP 0.0.0.47:1433 0.0.0.39:2915 ESTABLISHED
TCP 0.0.0.47:1433 0.0.0.39:3106 ESTABLISHED
TCP 0.0.0.47:2007 0.0.0.26:1487 ESTABLISHED
TCP 0.0.0.47:2007 0.0.0.79:1139 ESTABLISHED
do we have any command to kill the connected session to my sql except kill spid.
ex: i want to kill the session of IP 0.0.0.79 from my sql server.
thanks in advance
Hi ..
I want to Write in files or read from files
for example i have My_File.txt . i need a syntax and i want to call this syntax in my Store procedure and this syntax write forexample " Hello Word " in My_File.txt .
and i want another syntax that read from My_File.txt forexample "Word" from My_File.txt . what are those syntaxes do that ??
Is there any way better than XP_CMDSHELL for writing in or reading from MyFile.txt ??
thanks
Hi
Why am I not able to use a table created via CTE with xp_cmdshell to dump it to a text file?
cPRLDetails AS
(
SELECT 1,2,3
FROM [dbo].[VmyVIew] vsp
)
EXEC master..xp_cmdshell 'bcp "Select * FROM cPRLDetails ORDER BY PartExt05" queryout "p: argetfile.txt" -c -T'
I get the following error
Error = [Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'cPRLDetails'.
Thanks