EXEC In Triggers, 'inserted' Not Recognized
Jul 3, 2000
Hi,
I'm trying to build a trigger with next sql statements & variables. Seems like the only way is with an EXEC sp_executesql, but even this trivial example gives "Invalid object name 'inserted'." (the more fully coded trigger can be found at http://slos.com/sql.txt
CREATE TRIGGER [ti_contacts] ON [Contacts]
FOR INSERT
AS
EXEC sp_executesql N'SELECT * from inserted'
I'm a bit lost; can you show me the way??
thx,
Dave
View 1 Replies
ADVERTISEMENT
May 16, 2013
I am trying to execute a stored proc like this
Declare @cmd varchar(1000)
Declare @Path1 varchar (1000)
Declare @user_id varchar (50)
Declare @password varchar (50)
set @cmd = 'exec' + ' ' + stored_proc_name' + ', ' + @user_id +', ' + @password + ', ' + @Path1
exec master..xp_cmdshell @cmd
ERROR I am getting = 'exec' is not recognized as an internal or external command,
View 2 Replies
View Related
Jan 31, 2000
I wrote a trigger that works fine when I insert record by record in the DB.
However, when I run a Stored Proc to insert a bunch of records at the same time, the trigger only works for the last record.
Anyone has a clue or a possible solution.
The trigger is well tested and works fine.
Best Regards,
Gabriel Cohen
gabrielc@yahoo.com
View 1 Replies
View Related
Mar 17, 2008
I like to use the table "Inserted" within exec(), but it doesn't work because the scope is different. Does anyone have some sort of solution to this problem? The reason I am doing it this way is because I have a table consist of 200+ columns of bit types that contains permission information (The worest design i have ever seen!).
Code Snippet
--gather column names
declare @ScreenPermissions nvarchar(256)
declare c_Permission cursor
for
SELECT [name]
FROM syscolumns
WHERE id = (
SELECT id FROM sysobjects
WHERE type = 'U'
AND [NAME] = 'ScreenPermissions'
)
and [name] like 'Allow%'
open c_Permission
fetch next from c_Permission
into @ScreenPermissions
while @@fetch_status = 0
begin
exec('INSERT INTO EmployeeInRoles (EmployeeID, RoleID) ' +
'select i.EmployeeID, r.RoleID ' +
'from inserted as i ' +
' inner join ScreenPermissions AS sp on sp.EmployeeID = i.EmployeeID and sp.' + @ScreenPermissions + ' = 1 ' +
' inner join Roles AS r on r.LoweredRoleName = Lower(' + '''' + @ScreenPermissions + '''' + ')' )
fetch next from c_Permission
into @ScreenPermissions
end
close c_Permission
DEALLOCATE c_Permission
View 7 Replies
View Related
Mar 22, 2000
I am reading the WROX "Professional SQL Server 7 Programming" book.
The following code appears on page 424:
CREATE TRIGGER ProductIsRationed
ON Products
FOR UPDATE
AS
IF EXISTS
(
SELECT 'True'
FROM Inserted i
JOIN Deleted d
ON i.ProductID = d.ProductID
WHERE (d.UnitsInStock - i.UnitsInStock) > d.UnitsInStock / 2
AND d.UnitsInStock - i.UnitsInStock > 0
)
BEGIN
RAISERROR('Cannot reduce stock by more than 50%% at once.',16,1)
ROLLBACK TRAN
END
The trigger fires when an UPDATE is made to Products table. The author states that the Inserted and Deleted tables only exist for the life of the trigger, not before, and not after the trigger runs. If this is true, then why would there be any rows in the Deleted table in this case? No rows were
deleted within the trigger. As far as I can see, no rows have been updated
either. If the condition does exist, no rows will be updated, and an error will be displayed. Otherwise, the row will be updated. Then there would be a row in the inserted table. But then the trigger is finished and the inserted table for that trigger disappears. I think my logic is flawed, which is why I am writing. I don't think I fully understand the Inserted and Deleted tables.
Any help would be greatly appreciated.
Nathan
View 7 Replies
View Related
Dec 18, 2007
I'm know the above tables are system generated, am I right in assuming the following.
1) The tables are unique to the current user.
2) The tables only last as long as the transaction that caused their creation
Thanks in advance
Alex
View 1 Replies
View Related
Sep 11, 2001
I want to compare the before and after values of an UPDATEd column using a trigger. I want to know if the value in the column has changed. Simple? No!
As you know, SqlServer puts the before image of the UPDATEd rows into the DELETED virtual table and the after image of the UPDATEd rows in the INSERTED virtual table.
So you would get the before and after data by doing a SELECT on these tables.
But here is the problem - how do you join the tables? What if there are >1 rows in these 2 tables (because the UPDATE affected >1 rows) - how do i know which "old"/DELETED rows correspond to which "new"/INSERTED?"
Ok - I could join the 2 tables on the primary key, but what if the primary key was updated? In that case the join would not work - the DELETED table would contain the old primary key value and the INSERTED table would contain the new (different) primary key value. In fact, ALL of the columns may have been changed by the UPDATE.
Now, there is another thing to try with triggers - the
IF UPDATE ( <columname> )
test. This is designed to tell you if a specified column was UPDATEd by the last UPDATE. However, this will return TRUE for any UPDATE that mentions the column - even if the UPDATE does not change any data! So I cannot determine whether a certain column has had its value changed with this either.
So then you can try another test mentioned in the docs for CREATE TRIGGER - the
IF COLUMNS_UPDATED()
test. However, this will report that a column has been updated, NOT whether the data has changed as aresult of that UPDATE.
So if you UPDATE the value in the column to the same value as it was beforehand (admittedly, a pointless thing to do, but it could happen in some apps), this fuction will say, yes, this column was updated.
So my question remains - how do I know if the data has changed in a column after an UPDATE, using a trigger?
Any ideas?
View 1 Replies
View Related
Mar 6, 2008
Hi all. I have this problem:
on insert in a new table a have to change one column before insert.
I wrote this trigger:
create trigger SUBSCR_ID_TRANSFER ON dbo.SalesOrderExtensionBase AFTER INSERTAS BEGIN SET NOCOUNT ON;DECLARE @OpportunityID uniqueidentifier;DECLARE @subscrId uniqueidentifier;declare @salesorderid uniqueidentifier;set @salesorderid = (select SalesorderID from inserted)SET @OpportunityID = (SELECT OpportunityId FROM SalesOrderBase where SalesOrderID=@salesorderid)SET @subscrId = (SELECT New_old_subscridId from OpportunityExtensionbase where OpportunityID=@OpportunityID)Update inserted set New_old_subscridId = @subscrIdENDbut SQL Rise the error "The inserted values can not be modified"
how to slove this issue.
Thanks.
View 5 Replies
View Related
Jun 13, 2015
I would like to wrap the following code in a function and reuse it. Â I use this code in many triggers.
DECLARE @Action as char(1);
SET @Action = (CASE WHEN EXISTS(SELECT * FROM INSERTED) AND EXISTS(SELECT * FROM DELETED)
THEN 'U' Â -- Set Action to Updated.
WHEN EXISTS(SELECT * FROM INSERTED)
THEN 'I' Â -- Set Action to Insert.
WHEN EXISTS(SELECT * FROM DELETED)
THEN 'D' Â -- Set Action to Deleted.
ELSE NULL -- Skip. It may have been a "failed delete". Â Â
END)
Is it possible to write a function and pass the INSERTED and DELETED logical tables to it?
View 5 Replies
View Related
Jul 23, 2005
Hi all!In a insert-trigger I have two joins on the table named inserted.Obviously this construction gives a name collition beetween the twojoins (since both joins starts from the same table)Ofcourse I thougt the usingbla JOIN bla ON bla bla bla AS a_different_name would work, but itdoes not. Is there a nice solution to this problem?Any help appriciated
View 1 Replies
View Related
Jun 5, 2006
is there any way of getting the identity without using the "@@idemtity" in sql??? I'm trying to use the inserted event of ObjectDataSource, with Outputparameters, can anybody help me???
View 1 Replies
View Related
May 12, 2008
This isn€™t an problem as such, it€™s more of a debate.
If a table needs a number of update triggers which do differing tasks, should these triggers be separated out or encapsulated into one all encompassing trigger. Speaking in terms of performance, it doesn€™t make much of an improvement doing either depending upon the tasks performed. I was wondering in terms of maintenance and best practice etc. My view is that if the triggers do totally differing tasks they should be a trigger each on their own.
www.handleysonline.com
View 12 Replies
View Related
Nov 4, 2004
Hi
I am a bit new to SQL Server so please help me
I am trying to run a simple task at a customer but it doesn't work.
bcp isn't recognized.
I'm running this:
exec xp_cmdshell 'bcp "SELECT top 10 * FROM pubs..authors " queryout "C:Temphej.txt" -c -S [ServerName] -T'
and it givs me this errormess.
'bcp' is not recognized as an internal or external command,
It works fine for me when I'm running it on my computer.
Can anyone please inform me what I'm missing. I haven't got a clue.
BR
Ciotti
View 3 Replies
View Related
Oct 31, 2007
I have two SQL Server 2000 (one is localhost, one is remote with VPN IP 192.168.5.4).
I can select * from [192.168.5.4].db.dbo.test but I can't exec [192.168.5.4].db..spAdd in localhost.
These select and sp is OK for 1 or 2 week without any problem,but it didn't work one day.
Can some one explain why?
View 5 Replies
View Related
Oct 8, 2004
I am using MS SQL Server 2000. I am reading right off of microsofts web site under Trasact-SQL Reference, on how to use the MIN function. Yet when I try to use it, I get the error:
'min' is not a recognized function name
Here is the sql statement copied right out of Query Analyzer:
select name, count(name), min(
case when not(var6 = '') then 7 else
case when not(var5 ='') then 6 else
case when not(var4 ='') then 5 else
case when not(var3 ='') then 4 else
case when not(var2 ='') then 3 else
case when not(var1 ='') then 2 else 1 end end end end end end as cols
)
from syitabs
where dupef=0
group by name
View 2 Replies
View Related
Sep 3, 2007
i have this action.jumpto url
="javascript:void window.open('http://bklc-crm01:5555/cs/cases/edit.aspx?id={" & cstr(Fields!incidentid.Value) & "}','_self')"
for some reason when i use this field (incidentid.value) there is no hyperlink generated, however when i change the value to another field, the hyperlink works, what shall i be looking for, incident value is a set of number with dashes!
View 1 Replies
View Related
Oct 9, 2006
Just installed SQL Server 2005 Express along with the Management Studio. The Management Studio, at least what I've seen so far, seems to work fine. But when I type "sqlcmd" at the command prompt, I get "sqlcmd is not a recognized internal or external command, operable program or batch file." What gives???
View 4 Replies
View Related
Jun 18, 2008
HI,
This is my req...
i have to sum up the qty n that qty should be added to qtyonhand in other table....
Declare Qty INT
Qty =SELECT SUM(Quantity) FROM InventoryLedger WHERE ITEMID=@ItemID
UPDATE IW
SET IW.QtyOnHand=IW.QtyOnHand + Qty - @TAllotedQty
FROM InventoryByWarehouse IW
where
IW.CompanyID = @CompanyID
AND IW.DivisionID = @DivisionID
AND IW.DepartmentID = @DepartmentID
AND IW.ItemID=@ItemID
Thanks...
View 20 Replies
View Related
Feb 17, 2006
'int' is not a recognized CURSOR option.
I think this error message is related to the fact that I'm using CREATE Table in my stored procedure to handle temporary table data. What can I do to declare a variable here?
CREATE PROCEDURE spTeamPORReport
(@FacilityName nvarchar(50) = NULL,
@CustomerTeamName nvarchar(50) = NULL,
@CustomerName nvarchar(50)=NULL,
@AssemblyPartNumber nvarchar(50)=NULL,
@DateStart smalldatetime,
@DateEnd smalldatetime)
AS
SET NOCOUNT ON
DECLARE MyRecordCount int
CREATE TABLE #FiveWorstPerformance
(PartNumber nvarchar(50),
Customer nvarchar(50),
ProdDesc nvarchar(50),
TestedICT bigint,
FailedICT bigint,
FPYICT float,
TestedAOI bigint,
FailedAOI bigint,
FPYAOI float,
TestedFUNC bigint,
FailedFUNC bigint,
FPYFUNC float,
RecordID identity(1,1) int)
...
Thanks,
Tom
View 4 Replies
View Related
Mar 2, 2006
I am trying to run the following code in SQL Server 2005:
DECLARE @cleartext NVARCHAR(100)
DECLARE @encryptedstuff NVARCHAR(100)
DECLARE @decryptedstuff NVARCHAR(100)
SET @cleartext = 'XYZ'
SET @encryptedstuff = EncryptByPassPhrase('12345', @cleartext)
SELECT @encryptedstuff
SET @decryptedstuff = DecryptByPassphrase('12345', @encryptedstuff)
SELECT @decryptedstuff
and am recieving an error:
Msg 195, Level 15, State 10, Line 5
'EncryptByPassPhrase' is not a recognized function name.
Msg 195, Level 15, State 10, Line 7
'DecryptByPassphrase' is not a recognized function name.
It appears as though this EncryptByPassPhrase and DecryptByPassphrase as supported in 2005 T-SQL commands but when I execute this code in SQL Server Studio it errors out.
Anyone know why?
View 1 Replies
View Related
Feb 14, 2007
Hello all,
We recently moved our Team Foundation Server from one server to another, of course the reporting services was also included in that move.
On the new server, we are not able to change Reporting Services security parameters anymore, we get this error :
User or group « BUILTINAdministrators » not recognized. (rsUnknownUserName)
The old server was an english windows 2003, the new one a french version, i guess the problem is related. The BUILTINAdministrators group name on the new server is "BUILTINAdministrateurs".
Is there a way to change security params without getting this error ? How can we remove from Reporting Services this reference to BUILDTINAdministrators ? I've tried to modify the table Users directly in ReportServer DB without any success..
Please help !
Alexandre
View 1 Replies
View Related
Nov 27, 2007
I have read all of the messages related to the above problem and none have solved the issue.
We have migrated a SQL 2000 database to SQL 2005. Detached from one and attached to the other and then based on some of the conversation I also used the SQL Server 2005's copy option and copied the database. Detached the old one and renamed the new database which was created in the copy process to the old name. Basically getting back to where I started. By the way there are no triggers generated during the process (as was mentioned), nothing to delete as some of the discussion was suggesting.
Big databse, lots of tables and stored procedures. All screens seem to work except when we try to update some data using a stored procedure which takes the data and updates the table. End up getting the above error during the execution. All used to work fine with SQL Server 2000. I have taken the SQL out of the stored procedure and executed manually and it worked but leaving the stored procedure alone and calling it with the updated data we get the INITCOLVS problem. The database is also set to be compatible to 90 so that suggestion also has not fixed the problem. Looking for additional suggestions and solutions. Some one was talking about making a dummy INITCOLVS function, have not done this yet but don't particularly like this suggestion, like to know the cause and the proper solution to the problem.
Again in summary:
Migrated SQL 2000 database to 2005
Have done the copy and attach process to make sure the whole conversion to SQL Server 2005 has taken place.
Have set the compatibility of the database to 90
Updates cause the above error.
Thanks in advance.
Don
View 1 Replies
View Related
Apr 8, 2008
Hi,I am getting this error: String was not recognized as a valid DateTime.I'm trying to insert data into a table from a gridview, where two of the dates can be empty strings.I have set 'allow null' in the SQL Server table for the two dates, added the culture in the web.config file, and even tried converting the values to DBNull.None of which have worked, and I am still getting the error.This is the code I am using: if (e.CommandName == "EmptyInsert")
{
if (Page.IsValid == true)
{
TextBox txtVisitDateIns = GridView2.Controls[0].Controls[0].FindControl("txtVisitDateIns") as TextBox;
TextBox txtNextVisitDateIns = GridView2.Controls[0].Controls[0].FindControl("txtNextVisitDateIns") as TextBox;
TextBox txtVisitedByIns = GridView2.Controls[0].Controls[0].FindControl("txtVisitedByIns") as TextBox;
DropDownList ddlPriorityIns = GridView2.Controls[0].Controls[0].FindControl("ddlPriorityIns") as DropDownList;
TextBox txtMailshotDateIns = GridView2.Controls[0].Controls[0].FindControl("txtMailshotDateIns") as TextBox;
if (txtNextVisitDateIns.Text == "")
txtNextVisitDateIns.Text = DBNull.Value.ToString();
if (txtMailshotDateIns.Text == "")
txtMailshotDateIns.Text = DBNull.Value.ToString();
SPVisitsBLL visits = new SPVisitsBLL();
visits.AddVisit(Convert.ToInt32(GridView1.SelectedValue.ToString()), Convert.ToDateTime(txtVisitDateIns.Text.ToString()),
Convert.ToDateTime(txtNextVisitDateIns.Text.ToString()), txtVisitedByIns.Text.ToString(),
Convert.ToInt32(ddlPriorityIns.SelectedValue.ToString()), Convert.ToDateTime(txtMailshotDateIns.Text.ToString()));
GridView2.DataBind();
}
} I haven't checked txtVisitDateIns to see if it is an empty string as this date is required.Can anyone help?Thanks
View 5 Replies
View Related
Sep 16, 2005
I am passing a string to my stored procedure call where I convert it to a DateTime. I have pasted the relevant code below. My trouble is that prior to execution of the stored procedure an error is thrown "String was not recognized as a valid DateTime".
The error does not get thrown when I pass it a date, it only throws it when no date is provided.
The page I am using is a form to do a search. The search can allow a date to be entered or left out. How do I catch an empty value in the c# for an invalid datetime and still send the variable to the stored procedure.
//////////////////////////// C# Code /////////////////////////////////// Passing the Date to a stored Procedure SqlParameter bdpDateFrom = new SqlParameter("@datefrom", SqlDbType.DateTime);bdpDateFrom.Value = Convert.ToDateTime(thisbdpDateFrom);myCommand.Parameters.Add(bdpDateFrom);
///////////////////////// Stored Procedure Code //////////////////////////////////@datefrom datetimeIF ((@datefrom IS NOT NULL) AND (@datefrom <>' '))BEGIN SET @whereclause = @whereclause + ' AND T1.c330101invoicedate_dt >= ''' + convert(varchar,@datefrom) + ''''END Thank you!
View 3 Replies
View Related
Mar 21, 2013
how to format the last part of this query which comes from Access.:
SELECT Max(TITLOC.TitleLocID) AS MaxOfTitleLocID, TITLES.TitleID, TITLES.CustLName, TITLES.CustFName, TITLES.RecDT, TITLES.TitleID
FROM (TITLES_WARNING_SENT_qry RIGHT JOIN TITLES ON TITLES_WARNING_SENT_qry.TitleID = TITLES.TitleID) INNER JOIN TITLOC ON TITLES.TitleID = TITLOC.TitleID
WHERE TITLES_WARNING_SENT_qry.TitleID Is Null
GROUP BY TITLES.CustLName, TITLES.CustFName, TITLES.RecDT, TITLES.TitleID, TITLES.TitleID
HAVING (TITLES.RecDT<Date()-31)
I am getting:
'Date' is not a recognized built-in function name.
It is probably something simple but how would I go about converting this part "HAVING (TITLES.RecDT<Date()-31)" to something SQL Server is happy with?
View 4 Replies
View Related
Nov 10, 2014
I am trying to pull a report with average down time and I getting the error message "Msg 195, Level 15, State 10, Line 4 'AVG' is not a recognized built-in function name." when I try to run the below query. How can I rephrase the AVG(DateDiff) line to calculate this for me?
SELECT
TT.PartNumber
,AVG (TT.TimeToRepair) as [Avg Time to Repair (Hours)]
,AVG(DateDiff (hour,TT.TimeDateReported,TT.DateClosed) as [Turnaround Time(Hours)])
FROM dbo.vt_TroubleTicket TT
WHERE TT.Closed = '-1'
and TT.DateClosed between '1/1/2013' and '1/1/2014'
and (TT.PartNumber = '12345')
GROUP BY TT.PartNumber
View 3 Replies
View Related
Jun 4, 2008
I get a 'Specified cast is invalid' error message when I use the following query statement which has a COUNT verb in it.
SELECT DATAFIELD COUNT(DATAFIELD) AS 'Count' FROM EETABLE BY DATAFIELD
I only get this error when running the query in my C# program which is using SQL SERVER 2005 under VISTA. If I manually submit a query in Microsoft SQL Server Management Studio I receive no error. Also, I get no error if I run this program on an XP computer using SQL SERVER 2000. So where do I look for the source of the problem. Any help is appreciated.
Dave
View 10 Replies
View Related
Mar 25, 2008
I have a problem that many reports and folders were created with my administrative account. Due to some problems with AD my account was renamed MYDOMAINmyuser1. Everything has seemed to work fine for several months. Today I started getting an errors in the logs and subscriptions won't work.
w3wp!ui!1!3/25/2008-06:03:14:: e ERROR: System.Web.Services.Protocols.SoapException: The user or group name 'MYDOMAINmyuser' is not recognized. ---> Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MYDOMAINmyuser' is not recognized.
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService2005.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, String Description, String EventType, String MatchData, ParameterValue[] Parameters)
w3wp!ui!1!3/25/2008-06:03:14:: e ERROR: HTTP status code --> 200
-------Details--------
System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: The user or group name 'MYDOMAINmyuser' is not recognized. ---> Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MYDOMAINmyuser' is not recognized.
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService2005.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, String Description, String EventType, String MatchData, ParameterValue[] Parameters)
at Microsoft.ReportingServices.UI.ReportingWebControl.ShowErrorMessage(Exception e)
at Microsoft.ReportingServices.UI.SubscriptionPropertiesPage.SaveButton_Click(Object sender, EventArgs args)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!3/25/2008-06:03:14:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!extensionfactory!1!3/25/2008-06:03:41:: w WARN: The extension Report Server Email does not have a LocalizedNameAttribute.
w3wp!extensionfactory!1!3/25/2008-06:03:41:: w WARN: The extension Report Server FileShare does not have a LocalizedNameAttribute.
I've deleted and recreated the subscriptions and I am still get these error messages. Any help resolving this is really appreciated.
View 3 Replies
View Related
Nov 1, 2007
declare @DatabaseName varchar(128)
set @DatabaseName = 'my new db test'
DECLARE @SQLStr varchar(500)
PRINT @DatabaseName
set @SQLStr = 'use '
+ @DatabaseName
+ ' PRINT '
+ @DatabaseName
EXEC (@SQLStr)
Error Output:
--------------------------------------------------------------------------
my new db test
Server: Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'my'. No entry found with that name. Make sure that the name is entered correctly.
-----------------------------------------------------------------------
Any idea how to get the entire database name to be used with spaces in the database name. It prints the @DatabaseName just fine, but in the dynamic sql, it truncates after the first space.
I already tried N'my new db test' in the set statement. That didn't work. I tried using NVARCHAR when declaring the variable.
Let me know as soon as you can. Thanks!!
View 7 Replies
View Related
Jan 28, 2008
why I am getting this error on the SQl Server 2005 but not getting it on the SQL Server Express? and how to ifx?
Code Snippet
Msg 195, Level 15, State 10, Procedure sp_check_sp, Line 14
'OBJECT_SCHEMA_NAME' is not a recognized built-in function name.
this is my code:
Code Snippet
USE shefa
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
ALTER PROCEDURE [dbo].[sp_check_sp]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
SELECT DB_NAME(st.dbid) DBName
, OBJECT_SCHEMA_NAME(st.objectid, dbid) SchemaName
, OBJECT_NAME(st.objectid, dbid) StoredProcedure
, MAX(cp.usecounts) Execution_count
FROM sys.dm_exec_cached_plans cp
CROSS APPLY sys.dm_exec_sql_text(cp.plan_handle) st
WHERE DB_NAME(st.dbid) IS NOT NULL AND cp.objtype = 'proc'
GROUP BY cp.plan_handle, DB_NAME(st.dbid),
OBJECT_SCHEMA_NAME(objectid, st.dbid),
OBJECT_NAME(objectid, st.dbid)
ORDER BY MAX(cp.usecounts)
END
View 4 Replies
View Related
Aug 15, 2007
The row_number functions doesn't seem to be operable in our version of SQL Server 2005 SP2.
We have completely tried everything, including using the sample database, and Query posted in the 2005 SQL Server 2005 Book, which is as follows:
SELECT empid, qty,
ROW_NUMBER() OVER(ORDER BY qty) AS rownum
FROM dbo.Sales
ORDER BY qty;
I get the following error:
Msg 195, Level 15, State 10, Line 2
'ROW_NUMBER' is not a recognized function name.
Below you will find the versions of SQL we are using of 2005.
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.42
Operating System 5.1.2600
Please help!! Thanks in Advance,
Jason
View 4 Replies
View Related
Jan 30, 2007
Hello All,
Can anyone tell me what is error is and how to resolve it?
Thanks.
View 4 Replies
View Related
Aug 31, 2007
hi all, i'm trying to insert the time/date a button was clicked on a gridview and it generates an error:the string was not recognized as a valid DateTime.There is an unknown word starting at index 0 i have changed the culture to en-US but it still doesn't work. i actually created the date/time column after some data had been entered into the table so the column allows nulls. this is my code:InsertCommand="INSERT INTO test101(Surname,Names,Registration,Login Time)VALUES (@Surname, @Names, @Registration,@Login_Time)"<Insert Parameters><asp:Parameter DefaultValue= DateTime.Now Type=DateTime Name="Login_Time" /></Insert Parameters>any suggestions?
View 9 Replies
View Related
