EXECuting Sp's Within Sp's (using Return Params)
Feb 1, 2005
Hi all,
To optimise certain functionality in my app I want to do a few inserts after another by executing the whole lot in one procedure. I want to use the return param from some procedures (RETURN @@IDENTITY) as input for some of the other procedures.
I am getting errors when I compile the proc:
Line 10: Incorrect syntax near the keyword "EXEC"
Same error on Line 11...
CREATE PROCEDURE addTemplateDetail
@TemplateID int,
@GroupNameID int,
@SubGroupNameID int=null,
@MethodID int,
@AnalyteID int
AS
DECLARE @TemplateGroupNameID int
DECLARE @TemplateMethodID int
SET @TemplateGroupNameID=(EXEC addTemplateGroupName @TemplateID, @GroupNameID)
SET @TemplateMethodID=(EXEC addTemplateMethod @TemplateGroupNameID, @SubGroupNameID, @MethodID)
EXEC addTemplateAnalyte(@TemplateMethodID,@AnalyteID)
I also tried adding brackets around the input params for the EXECed sp's, but that generated even more errors...
Can somebody see what I am doing wrong?
TIA.
View 1 Replies
ADVERTISEMENT
Mar 25, 2008
I have a set of reports that run just fine with the default parameters (Country = US). The report returns data within 60 seconds. However, if I change the default parameters, say to Country = UK, the report will run and won't seem to stop. The user will be prompted every few minutes to relogin to the domain (which they are not prompted when they first run the report). On the server, the report is taking up 1 of the four CPU's and is using a huge amount of disk paging.
Here's the kicker. If I go in, change the default parameters to Country = UK and deploy the report, it will run in 60 seconds with the new default parameters. Now I try to run the report by changing the country = US and it locks up when it is executed.
Anybody run into something like this?
Rob
View 5 Replies
View Related
Aug 23, 2007
I'm executing an SSIS package using the following stored procedure
ALTER PROC [dbo].[SSISRunBuildSCCDW] AS
BEGIN
DECLARE @ServerName VARCHAR(30), @ReturnValue int, @Cmd varchar(1000)
SET @ReturnValue = -1
SET @ServerName = 'myserver'
SET @Cmd = 'DTExec /SER ' + @ServerName + ' ' +
' /SQL ' + 'BuildSCCDW ' --Location of the package stored in the mdb
--' /CONF "\ConfigFilePath.dtsConfig" ' +
--' /SET Package.Variables[ImportUserID].Value; ' +
--' /U "LoginName" /P "password" '
EXECUTE @ReturnValue = master..xp_cmdshell @Cmd, NO_OUTPUT
RETURN @ReturnValue
--SELECT @ReturnValue [Result]
END
I'm then using a tableadapter to execute this from my ASP.NET page using the following code, Protected Sub ExecutePackage()
Dim ExecuteAdapter As New SCC_DAL.RunSSISTableAdapters.SSISRunBuildSCCDWTableAdapter()
ExecuteAdapter.SetCommandTimeOut(0)
Dim strResult As String
strResult = ExecuteAdapter.Execute()
lblResult.Text = strResult
End Sub
If I remove 'NO_OUTPUT' from my stored procedure and run it the results contain a field named 'output' with all the steps from my package. Then below this is my return value. In my code I can only return the first step of the package results - which tells me nothing useful. I need to be able to return the return value (0-6) in my code.
When I have 'NO_OUTPUT' in my stored procedure and execute it I am left with just the return value. However no value is returned in my code at all although the package does run. I've tried bother RETURN @ReturnValue and SELECT @ReturnValue to no avail.
Can someone suggest how I can get the value 0-6 to my code?
View 1 Replies
View Related
Jun 11, 2015
We are executing a SSIS package using a xp_cmdshell command in a SP as shown below. This package does consumes time to execute almost 90 minutes and does get executed successfully too. But the strange thing is we don't get the result in @result variable just because somehow the next sql statement after the below highlighted statement doesn't get executed at all. Â After checking execution stats for the SP using the query attached below we observed that somehow the SP vanishes out of the execution stats for the server.
 SELECT @cmd = 'dtexec /FILE "D:Program FilesMicrosoft SQL Server100DTSPackages.....PopulateReport.dtsx"'     Â
 SELECT @cmd = @cmd + ' /Decrypt T@!0er '     Â
 SELECT @cmd = @cmd + ' /set package.variables[vAppID].Value;' + CONVERT(VARCHAR(10),@appId)     Â
 SELECT @cmd = @cmd + ' /set package.variables[vDBName].Value;' + '"' + @db + '"'     Â
 SELECT @cmd = @cmd + ' /set package.variables[vBuildMFF].Value;' + CONVERT(VARCHAR(10),@BuildMFF)     Â
Â
[code]....
View 6 Replies
View Related
Jan 24, 2008
Hi,
I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query window
Please see the image through this url http://kyxao.net/127/ExecutionProblem.png
Any ideas for this issue?
Thanks a lot
View 1 Replies
View Related
Jan 23, 2008
Hi,I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query windowPlease see the image attached http://kyxao.net/127/ExecutionProblem.png Any ideas for this issue?Thanks a lot Jalijack
View 2 Replies
View Related
Jan 27, 2006
HeyLet's say I have some stored procedure that takes as a param userId and it's simple SELECT statement. I want to assign this param and value in my code how to do it ???Jarod
View 2 Replies
View Related
Oct 13, 1999
Can I pass a parameter to a DTS package?
Here is what I am trying to do: Every month we need to import a fixed format text file into one of our tables. The format and location of the file is same every month except for the name. I want to create a DTS package to import it and call this DTS package first thing in a stored procedure(after which I do some processing with this imported data). I want to create the filename in my stored procedure and then call this DTS package to import it.
I am usig DTS as the interface is so much easier and want to avoid bcp :-)
Is it possible?
Thanks in advance,
Nishi
View 1 Replies
View Related
Oct 31, 2007
Hello,
Basically I am trying to do an order by statement using variables.
I have the SQL:
IF @SortOrder = 'ASC'
BEGIN
SELECT DISTINCT D.Code as 'T1', D.CompanyName as 'T2',
S.SpendAmount as 'T3', E.SpendAmount as 'T4',
E.SpendAmount - S.SpendAmount as 'T5',
Case When S.SpendAmount > 0 Then ((E.SpendAmount - S.SpendAmount)/S.SpendAmount) * 100
When S.SpendAmount = 0 Then ((E.SpendAmount - S.SpendAmount)/1)
When E.SpendAmount > 0 Then ((E.SpendAmount - S.SpendAmount)/E.SpendAmount) * 100
When E.SpendAmount = 0 Then ((E.SpendAmount - S.SpendAmount)/1)
END as 'T6'
FROM DivisionData D,
(SELECT Code, SpendAmount FROM DivisionData WHERE Year = @StartYear and Month = @StartMonth and Division = @Division) S,
(SELECT Code, SpendAmount FROM DivisionData WHERE Year = @EndYear and Month = @EndMonth and Division = @Division) E
WHERE D.Division = @Division
AND S.Code = D.Code
AND E.Code = D.Code
END
I have the params @Crit1 @Crit2 .... to @Crit6. These parameters come from a web form and can have the values 'T1' 'T2'... to 'T6' They correspond to the field names I have put in my select statement.
What I want to do is use these params in an Order By statement, enabling the user to select how the fields are ordered.
I have tried using something along the lines of:
ORDER BY
CASE WHEN @Crit1 = 'T1'
THEN 'T1' END
This works as long as I dont use the word DISTINCT in my select statement, otherwise I get the error:
Msg 145, Level 15, State 1, Line 4
ORDER BY items must appear in the select list if SELECT DISTINCT is specified.
I do need the distinct... I was wondering if there is a simple way to get round this, or if anyone can point me in the right direction or a article/example of this?
Many thanks
Andrew Rayner
View 6 Replies
View Related
Oct 10, 2006
Hi all,I am facing an unusual issue here. I have a stored procedure, that return different set of result when I execute it from .NET component compare to when I execute it from SQL Management Studio. But as soon as I recompile the stored procedure, both will return the same results.This started to really annoying me, any thoughts or solution? Thanks very much guys
View 2 Replies
View Related
Feb 2, 2004
I've got a pretty straightforward search/results suite with several possible search parameters on the search page. I've been using an inline SQL server query with logic on the results page as shown below. How do I convert this kind of conditional logic to a stored procedure?
Dim strWhere
strWhere = " WHERE dbo.""User"".UID IS NOT NULL "
If Not request.querystring("EmployerID") = "" Then
strWhere = strWhere & " AND dbo.""User"".EmployerID = '" & replace(request.querystring("EmployerID"),"'","''") & "'"
End If
If Not request.querystring("AccountNumber") = "" Then
strWhere = strWhere & " AND dbo.""User"".AccountNumber = '" & replace(request.querystring("AccountNumber"),"'","''") & "'"
End If
If Not request.querystring("LastName") = "" Then
strWhere = strWhere & " AND dbo.""User"".LastName = '" & replace(request.querystring("LastName"),"'","''") & "'"
End If
If Not request.querystring("FirstName") = "" Then
strWhere = strWhere & " AND dbo.""User"".FirstName = '" & replace(request.querystring("FirstName"),"'","''") & "'"
End If
DBConn = New OleDbConnection(ConfigurationSettings.AppSettings("ConnStr"))
DBCommand = New OleDbDataAdapter _
("SELECT dbo.""User"".*, Convert(varchar(16), dbo.""User"".DateEntered, 101) AS Created, dbo.Employer.CompanyName, dbo.AccessLevel.AccessLevel AS AccessLevelName FROM dbo.""User"" INNER Join dbo.Employer ON dbo.""User"".EmployerID = dbo.Employer.EmployerID INNER JOIN dbo.AccessLevel ON dbo.""User"".AccessLevel = dbo.AccessLevel.AccessLevelID " & strWhere & " ORDER BY " & strSortField,DBConn)
Thanks in advance?
View 3 Replies
View Related
Feb 7, 2005
I have a long running trigger that makes calls to several tables in order to get values for a list of parameters before doing my final INSERT statement into a different table.
One of my parameters is for a local language translation of a particular word which is stored in a table. The problem is - I do not know the name of the table until runtime when I dynamically build the name as follows:
DECLARE @SQL nVarChar(200)
SET @SQL = 'SELECT @Translation = nvcLocalEventDescription FROM Monitoring.dbo.tblSignalTemplate'
+ CAST(@MonitoringCentreID AS nVarChar) + ' WHERE nvcEventDescription = "' + @EventDescription + '"'
EXECUTE Management.dbo.usp_parmsel_LocalEventDescription @SQL, @LocalEventDescription OUTPUT
If there is a MonitoringCentreID of 1234, then there will be a table named tblSignalTemplate1234 - which will contain a nvcLocalEventDescription field containing the value that I am after. Here is the code for the stored procedure...
CREATE PROCEDURE [dbo].[usp_parmsel_LocalEventDescription]
@strSQL nVarchar(150),
@Translation nVarChar(100) OUTPUT
AS
EXECUTE sp_executesql @strSQL
GO
The error I get is "Must declare the variable '@Translation'" - which has thrown me a little as it declared on the 3rd line of the stored proc.
Anyone got any ideas where I am going wrong, or as usual, is there a simpler way ?
Steve.
View 2 Replies
View Related
May 7, 2008
Hi
I am trying to execute a stored procedure from another stored procedure by passing parameters. any idea please.
I have tried with EXECUTE PROC dbo.dxGetMemberActivityData (@author) RETURNING_VALUES RESULT
but I am getrting incorrect sytax near PROC
View 2 Replies
View Related
Feb 6, 2007
Hi... I am trying to display a parameter in my report.. the parameter can have up to 5 chocies... if all 5 are checked I want to display all 5..
I know how to trick it and use: Parameters!Country.Value(0)&Parameters!Country.Value(1) etc
Is there a way to do this that I dont have to have from (0) to (5)..
another thing... when you only choose 2 of the 5 params the rest show errors.. (#Error)
Thanks for help... and Happy Reporting !!
View 1 Replies
View Related
Jul 13, 2004
This is not obvious to me...
As far as i can tell, you cannot pass an array (or structured) parameter to a stored procedure...
Ok, this means when you have to store data for an item and its sub-items (e.g. a product and its - say- version specific infos) you cannot code all the logic into a single procedure. You need to code it into your DAL, where you first insert then loop to sub-insert...
Is this correct?
Is there any other way to approach the problem?
Thanks a lot. -julio
View 3 Replies
View Related
Oct 8, 2014
How to pass parameter values to Stored Procedure using Openquery ?
DECLARE @CenterNumber nvarchar(8)
DECLARE @CenterName nvarchar(100)
DECLARE @tblLeads table(
LeadCount int)
SET @CenterNumber = '98454152'
SET @CenterName = 'neck'
[code]....
View 3 Replies
View Related
May 26, 2004
Hi,
I've got the following C# function to add a customer record to the database. The record gets added without any problems but the OUTPUT PARAMETER (Parameter[10]) is always NULL and I can't see why. I'm also using the Microsoft Data Application Block.
Here's the C# function:
public void SaveCustomer(int customerId,string customerName,string address1,
string address2,
string town,
string county,
string postcode,
string webSiteAddress,
string mainTelNo,
string mainFaxNo)
{
try
{
SqlParameter[] parameters = DA.SqlHelperParameterCache.GetSpParameterSet(this.ConnectionString,"UpdateCustomer");
parameters[0].Value = customerId;
parameters[1].Value = customerName;
parameters[2].Value = address1;
parameters[3].Value = address2;
parameters[4].Value = town;
parameters[5].Value = county;
parameters[6].Value = postcode;
parameters[7].Value = webSiteAddress;
parameters[8].Value = mainTelNo;
parameters[9].Value = mainFaxNo;
parameters[10].Direction = ParameterDirection.Output;
int RetVal = DA.SqlHelper.ExecuteNonQuery(this.Connection,"UpdateCustomer",parameters);
if (RetVal > 0)
{
int Key = Convert.ToInt32(parameters[10].Value.ToString());
}
}
catch (Exception ex)
{
throw new Exception(ex.Message.ToString(), ex);
}
}
And here's the SQL Server 2000 Stored Procedure:
CREATE PROCEDURE UpdateCustomer
@CustomerId int,
@CustomerName varchar(100),
@Address1 varchar(50),
@Address2 varchar(50),
@Town varchar(30),
@County varchar(30),
@PostCode varchar(10),
@WebSite varchar(50),
@MainTelNo varchar(15),
@MainFaxNo varchar(15),
@ReturnValue int OUTPUT
AS
IF @CustomerId = 0
BEGIN
INSERT INTO Customer
(CustomerName, Address1, Address2, Town, County, Postcode, WebSite, MainTelNo, MainFaxNo)
VALUES(@CustomerName, @Address1, @Address2, @Town, @County, @Postcode, @WebSite, @MainTelNo, @MainFaxNo)
IF @@ERROR = 0
BEGIN
SELECT @ReturnValue = @@IDENTITY
END
ELSE
BEGIN
SELECT @ReturnValue = -1
END
END
ELSE
BEGIN
UPDATE Customer
SETCustomerName = @CustomerName,
Address1 = @Address1,
Address2 = @Address2,
Town = @Town,
County = @County,
Postcode = @Postcode,
WebSite = @WebSite,
MainTelNo = @MainTelNo,
MainFaxNo = @MainFaxNo
WHERECustomerId = @CustomerId
IF @@ERROR = 0
BEGIN
SELECT @ReturnValue = @CustomerId
END
ELSE
BEGIN
SELECT @ReturnValue = -1
END
END
Any help would be appreciated as it's starting to drive me mad now!!
View 7 Replies
View Related
May 15, 2005
I have a stored procedure that I use to return Purchase Orders from our PO system. It returns the data rows for PO's that match the criteria passed in (including the page to show etc.) + it returns two output params, Number of rows and Number of Pages.
Using query analyzer I can confirm the query works exactly as we want. I cannot however seem to get the data out to our ASP.net app.
Here is a function that I use in one of my classes:
<code>
Function fnListPOsByCoordinatorIDPaged(ByVal strCoordinatorID As String, ByVal intPOStatusID As Int16, _
ByVal intUserTypeID As Int16, ByVal intArchived As Int16, _ByVal intPageNum As Int32, ByVal intPerPage As Int32, _ByVal strConn As String) As SqlClient.SqlDataReader
Dim dr As SqlClient.SqlDataReader
SqlConnection1.ConnectionString = strConn
prListPOByCoordinatorPaged.Parameters("@CoordinatorID").Value = strCoordinatorIDprListPOByCoordinatorPaged.Parameters("@POStatusID").Value = intPOStatusIDprListPOByCoordinatorPaged.Parameters("@UserTypeID").Value = intUserTypeIDprListPOByCoordinatorPaged.Parameters("@Archived").Value = intArchivedprListPOByCoordinatorPaged.Parameters("@PageNum").Value = intPageNumprListPOByCoordinatorPaged.Parameters("@PerPage").Value = intPerPage
SqlConnection1.Open()dr = prListPOByCoordinatorPaged.ExecuteReader(CommandBehavior.CloseConnection)
Me.Pages = prListPOByCoordinatorPaged.Parameters("@Pages").ValueMe.Rows = prListPOByCoordinatorPaged.Parameters("@Rows").Value
If Me.Rows / intPerPage > Me.Pages Then Me.Pages = Me.Pages + 1End If
Return dr
prListPOByCoordinatorPaged.Dispose()SqlConnection1.Close()SqlConnection1.Dispose()
End Function
</code>
It does not crash, it returns my data reader with the correct records. Unfortunately my property values are returned as 0. They should have values.
Anyone know how to do this?
Thanks.
View 1 Replies
View Related
Jun 20, 2000
I am getting an insert error with the following SP. I don't have to pass the CampID because it is an IDENTITY field. The error says "number of supplied values does not match table definition."
Do I pass in the CampID to the SP and allow nulls? Thanks in advance
Nathan
CREATE PROCEDURE sp_CampReg1
@UserNamevarchar(15),
@Passwordvarchar(15),
@CampNamevarchar(50),
@Hostvarchar(50),
@Directorvarchar(25),
@Contactvarchar(25),
@Addressvarchar(30),
@Cityvarchar(25),
@Statevarchar(20),
@Zipvarchar(15),
@Countryvarchar(20) = NULL,
@Phonevarchar(20) = NULL,
@AlternatePhonevarchar(20) = NULL,
@Faxvarchar(20) = NULL,
@ContactEmailvarchar(20),
@AdminEmailvarchar(20),
@URLvarchar(50) = NULL,
@CampTypeint,
@CampProfileText =NULL,
@CampIDintOUTPUT
AS
INSERT INTO TempCampSignup
VALUES
(
@UserName,
@Password,
@CampName,
@Host,
@Director,
@Contact,
@Address,
@City,
@State,
@Zip,
@Country,
@Phone,
@AlternatePhone,
@Fax,
@ContactEmail,
@AdminEmail,
@URL,
@CampType,
@CampProfile
)
SELECT @CampID = @@IDENTITY
View 1 Replies
View Related
Mar 19, 2003
Can I use the result of a scalar function as the parameter for a stored procedure? ie
exec [dbo].[usp_insert_into_table]
@integer = [dbo].[uf_getAnIDfromName]('PLAYER')
where the @integer parameter expects an integer and the user function uf_getAnIDFromName returns an integer related to the 'PLAYER' name.
View 2 Replies
View Related
Jul 23, 2005
Hi all!Running the code below in SQL-analyzeer (or through dbExpress) results in NULL.As one might guess I would like the result to be 1. What is wrong? I.e, whywont the result of the SP come back to the caller?CREATE PROCEDURE test@val INTEGER OUTASSELECT @val = 1GODECLARE @val INTEGEREXEC test @valSELECT @val
View 1 Replies
View Related
Oct 27, 2005
Hi all,I'd like to put together a SQL statement that will take the name of astored procedure as a param, and return that SP's parameters.I'm writing a test application, and I'd like to wrte a generator tosave myself some time, but I can't seem to figure out how to get theparams from a SP. Any help would be appreciated.Thanks in advance,Craig
View 2 Replies
View Related
Jul 24, 2007
Hi,
I have a SSIS package with a Sequence which Contains a Webservice Task, in the input section of this task i want to pass a User Variable as Parameter for my webmethod. but it doesn´t work, it allways sends the variable definition as string "@[User::Filename]". so i searched Microsoft Technet how to pass User Variables in Webservice Tasks and found this site: http://technet.microsoft.com/en-us/library/ms187617.aspx
which says :
"
Variable
Select the check boxes to use variables to provide inputs. "
but there is no such checkbox on the input page of my Webservice Task... there is just the Value column which i can edit... but as mentioned before when i try to set the value to a variable it doesn work
i tried the following strings in the value column:
@[User::Filename]
@Filename
User::Filename
@User::Filename
any ideas?
thanks for your help
bye
as
View 5 Replies
View Related
Mar 15, 2007
hi
HHello!, the following 3 webmethods still work after i switched them to WCF but now it never accepts my parameters. i didn't change anything in reporting services, but i have a feeling it's not sending the params to the service anymore.
is there an operation contract attribute change i need to make to require the datetime be provided by RS?
here's the schema provided by my serviec wsdl (the relevant portion)
- <xs:element name="EeoByAssignmentReport">
- <xs:complexType>
- <xs:sequence>
<xs:element minOccurs="0" name="start" type="xs:dateTime" />
<xs:element minOccurs="0" name="end" type="xs:dateTime" />
</xs:sequence>
</xs:complexType>
</xs:element>
- <xs:element name="EeoByAssignmentReportResponse">
- <xs:complexType>
- <xs:sequence>
- <xs:element minOccurs="0" name="EeoByAssignmentReportResult" nillable="true">
- <xs:complexType>
- <xs:annotation>
- <xs:appinfo>
<ActualType Name="DataSet" Namespace="http://schemas.datacontract.org/2004/07/System.Data" xmlns="http://schemas.microsoft.com/2003/10/Serialization/" />
</xs:appinfo>
</xs:annotation>
- <xs:sequence>
<xs:element ref="xs:schema" />
<xs:any />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
- <xs:element name="EeoByPersonReport">
- <xs:complexType>
- <xs:sequence>
<xs:element minOccurs="0" name="start" type="xs:dateTime" />
<xs:element minOccurs="0" name="end" type="xs:dateTime" />
</xs:sequence>
</xs:complexType>
</xs:element>
- <xs:element name="EeoByPersonReportResponse">
- <xs:complexType>
- <xs:sequence>
- <xs:element minOccurs="0" name="EeoByPersonReportResult" nillable="true">
- <xs:complexType>
- <xs:annotation>
- <xs:appinfo>
<ActualType Name="DataSet" Namespace="http://schemas.datacontract.org/2004/07/System.Data" xmlns="http://schemas.microsoft.com/2003/10/Serialization/" />
</xs:appinfo>
</xs:annotation>
- <xs:sequence>
<xs:element ref="xs:schema" />
<xs:any />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
- <xs:element name="EeoCountsReport">
- <xs:complexType>
- <xs:sequence>
<xs:element minOccurs="0" name="start" type="xs:dateTime" />
<xs:element minOccurs="0" name="end" type="xs:dateTime" />
</xs:sequence>
</xs:complexType>
</xs:element>
- <xs:element name="EeoCountsReportResponse">
- <xs:complexType>
- <xs:sequence>
- <xs:element minOccurs="0" name="EeoCountsReportResult" nillable="true">
- <xs:complexType>
- <xs:annotation>
- <xs:appinfo>
<ActualType Name="DataSet" Namespace="http://schemas.datacontract.org/2004/07/System.Data" xmlns="http://schemas.microsoft.com/2003/10/Serialization/" />
</xs:appinfo>
</xs:annotation>
- <xs:sequence>
<xs:element ref="xs:schema" />
<xs:any />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
View 1 Replies
View Related
Oct 26, 2006
Hi all,
[Reporting Services 2005]
I have reports delivered by email subscription. My "date from - to" parameters are set to "default" as "=Today()" and "=Now()". Report is delivered fine but I have problems with "link" to that report (attached to email). RS don't add my default parameter values to this link so every time user click this link, report is generated with new "date from" and "date to" and I want to generate exact the same report (same parameters) as in the email.
Is there a way to send default parameter values as static values in email delivered report link ?
Thanks
Maciej
View 4 Replies
View Related
Mar 20, 2006
All,
I have the following :
ALTER PROCEDURE [dbo].[sp_FindNameJon]
@NameName varchar(50)='',
@NameAddress varchar(50)='',
@NameCity varchar(50)='',
@NameState varchar(2)='',
@NameZip varchar(15)='',
@NamePhone varchar(25)='',
@NameTypeId int=0,
@BureauId int,
@Page int=1,
@Count int=100000
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @SqlString nvarchar(3000),@SelectClause nvarchar(1000), @FromClause nvarchar(1000),@WhereClause nvarchar(1000)
DECLARE @ParentSqlString nvarchar(4000)
DECLARE @Start int, @End int
INSERT into aaJonTemp values (@Page, 'here2', @NameCity);
And inside of aaJonTemp, I have the following :
NULL
here2
NULL
NULL
here2
NULL
How is this possible? If @Page or @NameCity is NULL, how come it doesn't default to a value in the stored proc?
Thx
jonpfl
View 1 Replies
View Related
Feb 26, 2008
i have result set from such query :
resultSetOptions = System.Data.SqlServerCe.ResultSetOptions.Scrollable | System.Data.SqlServerCe.ResultSetOptions.Updatable;
queryText =
SELECT agvb_id as ID
,agvb_cat_id as Category
,agv_brn_id as Brand
,agvb_brn_name as BrandName
,agv_brn_area as Area
,agv_brn_sku_qty as SkuQuantity
,agv_brn_qty as Quantity
,agv_orderliness as Orderliness
,agvb_importance as Importance
FROM AGENTS_VISITS_BRANDS
WHERE (AGENTS_VISITS_BRANDS.agvb_agv_id = @agv_id)
AND (AGENTS_VISITS_BRANDS.agvb_cat_id = @dad_id)
ORDER BY agvb_brn_name
if i open resultSet with such qury it looses its updatable option.
If i remove from where 1 param (no mater which) everything runs ok.
View 1 Replies
View Related
Jul 31, 2007
Hi pals,
I am new to SSIS.I am getting a problem while setting the global parameters.
I created a package with a single task i.e an Execute SQL task.The associated sql is
"delete from src_emp where deptno=?" and i added a new user defined variable as "dno" i.e "user:no"
which of String type with scope=<package name>.The name of my package is "test.dtsx" which is a Structured File
save in my d: directory. I harded code the value in SSIS package desiner i.e in BIDS and tested the functionality,
it is working fine. But when i remove the hard coded value and when i tried to call the dts package using the command line
utility DTExec, i am getting. Below are the different ways i tried to set the global parameters.
trial 1:
---------
D:>dtexec /f test.dtsx /SET "Package.Variables[User:no].Properties[value]";"20"
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:06:51 AM
Warning: 2007-07-31 11:06:53.00
Code: 0x80012017
Source: Aug
Description: The package path referenced an object that cannot be found: "Package.Variables[User:no].Properties[value]".
This occurs when an attempt is made to resolve a package path to an object that cannot be found.
End Warning
DTExec: Could not set Package.Variables[User:no].Properties[value] value to 20.
Started: 11:06:51 AM
Finished: 11:06:53 AM
Elapsed: 1.094 seconds
trial 2:
---------
D:>dtexec /f test.dtsx /SET "Package.Variables[User:no].value";"20"
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:08:04 AM
Warning: 2007-07-31 11:08:05.99
Code: 0x80012017
Source: Aug
Description: The package path referenced an object that cannot be found: "Package.Variables[User:no].value". This occurs
when an attempt is made to resolve a package path to an object that cannot be found.
End Warning
DTExec: Could not set Package.Variables[User:no].value value to 20.
Started: 11:08:04 AM
Finished: 11:08:05 AM
Elapsed: 1.078 seconds
trial 3:
---------
D:>dtexec /f test.dtsx /SET "PackageExecute SQLTask.Variables[User:no].value";"20"
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:09:56 AM
Warning: 2007-07-31 11:09:57.58
Code: 0x80012017
Source: Aug
Description: The package path referenced an object that cannot be found: "PackageExecute SQLTask.Variables[User:no].val
ue". This occurs when an attempt is made to resolve a package path to an object that cannot be found.
End Warning
DTExec: Could not set PackageExecute SQLTask.Variables[User:no].value value to 20.
Started: 11:09:56 AM
Finished: 11:09:57 AM
Elapsed: 1.062 seconds
Any suggestions would be appreciated.
Thanks and Regards,
Manu
View 1 Replies
View Related
Aug 7, 2007
I have a stored proc that I'm using to run a report. It works fine, but currently I'm using a parameter that is a single selection from a dropdown. I'd like to use multi select, but have not been able to get it to work.
In the data tab I'm currently using "text" for command type and :
Code Snippet
declare @sql nvarchar(2000)
set @sql = '
EXEC [Monitor] '' + @p_OfferStatus + '''
exec sp_executesql @sql, N'@p_OfferStatus VARCHAR(100)', @p_OfferStatus = @p_OfferStatus
when I run this in the data tab, it works fine, returning data, but when I try to preview it it tells me there are syntax errors. Anyone know the correct way to use multi selects with stored procs?
View 4 Replies
View Related
May 12, 2015
We run std 2008 r2. I've never been able to get to my ssrs server thru ssms as u can see as part of the question atÂ
[URL] ..... but I've found workarounds to this point by knowing how to look at the rs db itself and by having access to the server itself thru rdp with an admin acct.
I'm looking at an error from a user that reminds me of what we used to call session timeouts. They would occur when the user has walked away from his desk long enough for ssrs to delete refs to the report he just ran.
I logged into the server itself hoping to find both exec and session timeout params via the rs config tool but did not see them there. What the config file is called and where i'd likely find it? Or perhaps a query I could use to see what the current values are?
View 8 Replies
View Related
Nov 5, 2007
I am learing VWD as I build a site and while I can use the various controls (GridView, FormView) to set up operations and retrieve/display database information, I need to be able to codebehind to do SQL operations for retrieving data to fill paper forms and to modify the database. After I retrieve data from the database, I need to do a lot of computation befor I build a paper quote that is emailed to a customer. I have written a subroutine to which I pass my sql query statement and I can add a new entry and edit an existing entry. The problem is a simple query to read an existing database entry.
If I write a simple command : Cmd = SELECT PartNumber, PartName, PartsAvailable FROM Inventory WHERE PartNumber = "P7226" , the command is executed but the return data falls on the floor somewhere as I dont know how to code to put the results in an array or in fact, have any idea on how to find the returned data. Can anyone help with this simple(?) problem? My sub that handles the sql command is shown below.
I have also been looking for the way to code in VB to cause existing controls like GridViews to access, edit, and insert but I havent been able to find a paper or tutorial. If anyone has seen this information, it would be helpful also.Protected Sub CallSQL(ByVal Cmd As String)
Dim conn As New SqlConnection("Data Source=.SQLExpress;AttachDbFileName=C:Documents and SettingsaMy DocumentsVisual Studio 2005WebSitesWebSite5App_DataPINEMgt.mdf; Integrated Security=True;Connect Timeout=30;User Instance=True") 'Data Source=.SQLEXPRESS;AttachDbFilename="C:Documents and SettingsaMy DocumentsVisual Studio 2005WebSitesWebSite5App_DataPINEMgt.mdf";Integrated Security=True;Connect Timeout=30;User Instance=True)Dim sql As String = String.Empty
sql = Cmd
'Open the connection to the database and execute he SQL
conn.Open()Dim command As New SqlCommand(sql, conn)
command.ExecuteNonQuery()
conn.Close()
End Sub
View 6 Replies
View Related
Feb 19, 2007
Hello experts,
I am trying to create a report including a subreport in VS.2003 Reporting services. The subreport itself runs properly, if I give it a parameter, but when I try to run the main (parent) report, I get the obvious message Subreport could not be shown.
The output windows returns a message:
The value expression used in textbox €˜AccountID€™ returned a data type that is not valid.
The AccountID field is a system.guid. I tried to "cast" it as a text, but I got another error message that the system.guid cannot be explicitly converted.
Does anyone know how to get around this?
Thank you very much.
Ravie.
View 1 Replies
View Related
Sep 25, 2007
I have an SP like this (edited for brevity):
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[TESTING_SP]
@Username MediumText,
@Password MediumText,
@UserKey int OUTPUT,
@RoleKey int OUTPUT,
@UserGroupKey int OUTPUT,
AS
BEGIN
SELECT
@UserKey = UserKey
FROM UserProfile
WHERE Username = @UserName
AND [Password] = @Password
END
I want to execute this sp in Managment Studio (MS) and see what is being returned but I'm getting this error:
Msg 201, Level 16, State 4, Procedure TESTING_SP, Line 0
Procedure 'TESTING_SP' expects parameter '@UserKey', which was not supplied.
How do I set up the output parameters and then select the values in MS for testing purposes?
Thanks a ton for helping a noob.
View 2 Replies
View Related
