Editing .dtsconfig Files
Oct 17, 2007
Apologies if this has been posted before and feel free to point me to an existing thread if it has.
I currently have a dev, stage and live environment for a package
i have created a load.dtsconfig file that contains various bits such as connection strings, email to, from, etc which i created via the package configurations in the dev package. I then made a few changes via XML Notepad
I went to use the same config file on stage and decided to add a further property. I selected package configurations on stage and selected edit it the package configurations box, added the property and clicked finish. However it reset all the existing properties to the values that exist in the actual package so all the changes i made via XML notepad were overwritten.
Is there anyway you can get the Package configurations editor to retain the values from the .dtsconfig file rather than reading in the values from the package???
cheers
Scott
View 4 Replies
ADVERTISEMENT
Dec 11, 2007
hi, all;
i'd like to resolve this problem:
We are Developing packages in Dev.Server; if we are Deploying our packages to Prod.Server; we need to modify the connection string and related properties of the connection manager.
1. How to modify the connection manager while deploying to production server?
2. can we create 2 dtsconfig file for a single package; is there any mechanism for instructing sequel server to use a particular dtsconfig file for our package.
i modified the config file in order to change the connection string. but its affecting only the config file not the package. while running the package its reffering the old connection string only.
please provide me some help
Thanks
View 16 Replies
View Related
Apr 24, 2007
When I edit package configuration files inside of Visual Studio, it puts all the XML on a single line. Does anyone know how to automatically spread the information onto multiple lines, to make comparing file differentials easier.
Thank you,
Mike
View 6 Replies
View Related
Apr 28, 2006
I am using a XML file and retrieving data for my SSIS 2005 (Intigration Service) package, where after retrieving the data I need to update my XML file with new data by using script task or XML task
<?xml version="1.0" ?>
<TimeBuilder>
<StartYear>2003</StartYear>
<EndYear>2004</EndYear>
</TimeBuilder>
View 3 Replies
View Related
Mar 20, 2007
When adding a SSIS DTSX package solution to Sourcesafe the SSIS Package Configuration file (.DTSConfig) is not included. We are using sourcesafe version 6.0d and Visual Studio 2005 Team Edition for Developers.
View 4 Replies
View Related
Feb 16, 2006
Hello all,
I'm trying to easily change a value in 80 ssis configuration files from "localhost" to "myservername". I downloaded WinGrep to do this, but it's balking on some of the files, saying that they are binary files.
Does anyone know how to make the *.dtsconfig files NOT binary in SSIS?
Any suggestions GREATLY appreciated.
I won't go into the reason I have my servername in 80 places...
Andy
View 6 Replies
View Related
Jun 12, 2007
Hi, i'm new in this forum and in SSIS, so I apologize if mine is a stupid question and also for my english.
I have this problem: i have to develop an ETL package and i have to set the transformation between input and output columns using a configuration file, i.e. my client want to change the transformation simply modifying a config file( for example from UPPER to LOWER ).
I tried using dtsconfig and setting EvaluateAsExpression with value 1( true ) and Expression UPPER[Column 2] but i get an error saying that Column 2 is not a variable.
There is a way to do it?
I don't know if i explained the problem well.
Thanks in advance
View 6 Replies
View Related
Apr 28, 2008
I have an SSIS package with a small number of connections for various databases, both SQL2K5 and AS2K5.
When I build the package the .dtsConfig file is produced but the contents for some of those connections are not accurate relative to the package itself. There are some old values retained in the .dtsConfig file.
Worse, when I deploy the package to another machine the installation should allow me to change these values to ones appropriate for the new server. While I am able to change them they are not retained and the old values crop back up making the package fail during execution.
Any idea where I can smack this thing to unstick these values?
Would specifics help? I can post the file(s) if need be.
Thank you in advance,
Erik Klein
View 7 Replies
View Related
Jul 9, 2007
Hi,
Up to now, we're using SSIS variables for storing values such as server name, database or several paths.
All these variables are required when our developers give to us their DTSX packages for to be updated in production scenarios.
And now, we'd like to use xml files but I don't know how to. We've already got xml files for Data Flow, Sql Task and so on..
Thanks indeed for your time,
View 4 Replies
View Related
Dec 10, 2007
hi i want to know what are the purposes of dtsconfig file for the package.
once we deploy our package, if we want to modify the connection string for the new excel source or data source or destination, how to modify the connection details at client site, or in the server,
please help me to modify these connection details after or before deployment at server machine.
View 6 Replies
View Related
Apr 7, 2008
I am going thru the Integration Services Tutorial found in Books Online and I'm on Lesson 3. It has to do with creating a configuration file for the source file location. I followed the steps and now I need to open the .dtsConfig file and type in the folder location.
The exact direction says,
"
In Notepad or any other text editor, locate and open the SSISTutorial.dtsConfig configuration file that you created by using the Package Configuration Wizard in the previous task.
Change the value of the ConfiguredValue element to match the path of the New Sample Data folder that you created in the previous task. Do not surround the path in quotes.
Save the change, and then close the text editor.
"
When I open the file, I see this. What am I supposed to do here?
<?xml version="1.0" ?>
- <DTSConfiguration>
- <DTSConfigurationHeading>
<DTSConfigurationFileInfo GeneratedBy="FFTWayi" GeneratedFromPackageName="Lesson3" GeneratedFromPackageID="{74BC5CCC-5C51-4ABD-9263-AD3C000E9E1C}" GeneratedDate="4/7/2008 11:25:53 AM" />
</DTSConfigurationHeading>
- <Configuration ConfiguredType="Property" Path="Package.Variables[User::varFolderName].Properties[Value]" ValueType="String">
<ConfiguredValue />
</Configuration>
</DTSConfiguration>
View 13 Replies
View Related
Mar 7, 2006
is this possible?
<Configuration ConfiguredType="Property" Path="Package.Variables[User::varFolderName].Properties[Value]" ValueType="String">
<ConfiguredValue>%enviroment variable%</ConfiguredValue>
</Configuration>
it would be really useful. it looks like the .dtsconfig file needs to be maintained on each install independently. This makes maintenance a nightmare. it would be a lot nicer if the .dtsconfig files were more like templates rather than hard coded values to specific system resources.
View 5 Replies
View Related
Mar 13, 2007
Hi frnds,
im running the SSIS package " data" in XXXdatabase.
now i have to run the same package in different database and in different server.
so i mentioned all the database config details in sql_server.dtsconfig file.
here i had attached my file :-
<?xml version="1.0"?><DTSConfiguration><DTSConfigurationHeading>
<DTSConfiguration>
<Configuration ConfiguredType="Property" Path="Package.Connections[YYY ].Properties[ConnectionString]" ValueType="String">
<ConfiguredValue>Data Source=YYY;User ID=XXX;Password=XXX;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;</ConfiguredValue>
</Configuration>
</DTSConfiguration>
after i attached the file in package configurations .
i was unable to see the db connection in connection managers.
i tried to attach the .dtsconfig file in (New OLEDB connection manager) but after clicking the test connection " Testconnection failed because of an error in intializing provider.The connectionString property is not intialized"
Please help me in this.
Thnkx in advance.
View 5 Replies
View Related
May 8, 2008
I was requested to build and move and existing SSIS package from the developers local PC to the Dev server. Both are running SQL 2K5, I built the following command file so SQL Agent can run the import job.
REM *** Run for FileImport
set FileImportLoadData=C:SSISConfigDEVFileImportLoadData.dtsConfig
"C:Program FilesMicrosoft SQL Server90DTSBinndtexec" /f "C:SSISConfigFileImportFileImportLoadData.dtsx"
All files are in the proper place but when the jobs runs the following message shows up in the history;
Message
Executed as user: LIGHTHOUSE1SQLEXEC. ...system32>set FileImportLoadData=C:SSISConfigDEVFileImportLoadData.dtsConfig C:WINDOWSsystem32>"C:Program FilesMicrosoft SQL Server90DTSBinndtexec" /f "C:SSISConfigDEVFileImportLoadData.dtsx"Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:54:00 AM Warning: 2008-05-08 08:54:01.77 Code: 0x80012014 Source: FileImportLoadData Description: The configuration file "FileImportLoadData.dtsConfig" cannot be found. Check the directory and file name. End Warning Warning: 2008-05-08 08:54:01.77 Code: 0x80012059 Source: FileImportLoadData Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Progress: 2008-05-08 08:54:01.82 Source... Process Exit Code 0. The step succeeded.
My questions is how do I fix this and is this really and error?
Jay B.
View 2 Replies
View Related
Dec 27, 2007
I use an XML configuration file for my SSIS package, and I have "Enable package configurations" checked. When I build the package, however, there is no dtsConfig file in the output (set to in) or the Deployment folder, and the config file is not included in the SSISDeploymentManifest file. There are no build errors or warnings.
This was working fine the last time I worked on this package (~9 months ago), but not now. I have since installed SP2, but can't confirm if the problem is related to a "fix" in SP2.
View 2 Replies
View Related
Dec 1, 2007
I built my package on my development machine with a config file at a given location. Let's say:-
C:DevelopmentdtsConfig.xml
Then I shipped my package to the Production machine and ran my package (in a .bat file) as follows:-
DTExec /FILE "C:ProductionPackage.dtsx" /CONFIGFILE "C:ProductiondtsConfig.xml"
But I get the following output:-
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 10:01:27 PM
Warning: 2007-11-30 22:01:29.52
Code: 0x80012012
Source: Package
Description: The configuration file name "C:DevelopmentdtsConfig.xml" is not valid. Check the configuration file name.
End Warning
...
But then it goes on to read values from my Production config file.
How can I stop the annoying warning about my Development config file-path (which doesn't exist on the Production machine)
Thanks
View 6 Replies
View Related
Nov 29, 2007
I am migrating from local to Dev,QA and Prod.
I created a .dtsconfig file containing database connection strings to Dev database. What is the "location" on the Dev server where this .dtsconfig file nees to be deployed to??
Thanks for your help.
View 5 Replies
View Related
Feb 16, 2008
Hello,
I have setup a package configuration and it ran fine; however, I would like to be able to use the script task to change content of the dtsConfig file. For example, I can get the newServerName using the SQL Task, then how can I assign the newServerName value to the DataSource in the package configuration file? Is this possible?
Thanks,
Andrew
View 17 Replies
View Related
Jul 20, 2015
I've deployed my ssis pkg to the server and created a sql job to run this pkg. So far, everything is fine. Today, I got a request to change some variables inside the package which is part of the .dtsconfig. I want to edit the deployed .dtsConfig but it won't allow me and always complained that this file has been opened by another program. I am sure i've closed my ssis designer and other notpad, why can't I edit and save .dtsconfig file?
View 4 Replies
View Related
Nov 24, 2015
I have a job/step that call a Fileprocessor.dtsx package with 4 different config files. I need to make a enhancement to the job to call the same package using a new (parent) package with multiple iterations based on some business condition.
I am going to modify the job/step to call ParentFileprocessor now with same all 4 config files which in-turn have a call to run Fileprocessor.dtsx; my problem is, how do I pass all 4 config files for child call? Using which task?
I m not allowed to modify Fileproessor.dtsx (to be child pkg) SQL2012, MSDB package deployment model.
View 3 Replies
View Related
Dec 19, 2007
Hi all,
I need one more help!
we can select the dtsconfig file with the Environment variable(indirect configuration);
but i need to select the configuration file at runtime; i've to load the package from the server and apply local configuration file to the package and run in a web server;
Requirements;
1. i have packages with its xml configurations for connection strings alone!
2. i deployed it on the server
3. Trying to execute the packages in a web page onclick event;
We have ASP.net WebPage; in On_Click Event, i have this code;
Application ap = new Application();
Package pk = ap.LoadFromSqlServer("\PROJECT", "itsssqldb", "pmo_package_user", "password", null);
pk.ImportConfigurationFile(@"Packagesdev_staging.dtsConfig");
pk.Execute();
here PROJECT is the Package name; i'm loading the package from the Common Sequel Server 2005; and applying the configuration file to that package and trying to execute this;
but its not using the config file what i mentioned; its returning failure!!
Can you please help me to resolve this issue!,
(The intention of doing this job is to select the configuration file( prod, dev) at runtime)
View 10 Replies
View Related
Feb 2, 2001
If I have a *.dts file, and want to change the originating server database from SERVERA DB_A to SERVERB DB_B, is there an easy method to do this, besides editing the file in the GUI form?
View 1 Replies
View Related
Jun 16, 2007
I need help transferring a SQL database. I currently have my website database on a SQL 4.0.27 (vdeck) and want to transfer it to a new server (VPS) which has SQL 4.1.2
I have imported the database to my desktop computer. It will not let me import to the new server. I have to edit/reconfigurate.
Any suggestions, comments, advice, help would be greatly appreciated.
Ed
ed.sistrunk@sistrunk.net
View 4 Replies
View Related
Nov 4, 2003
Can I edit database (Tables, SPs, Views,...) with ADO.NET?
View 3 Replies
View Related
Feb 16, 2005
hey guys,
is it possible to add or edit columns once there is data in the tables??
not the data in the columns but the columns themselves..
for example lets say i have a table with 4 columns and for some reason or
another, i want to add a 5th or 6th column after data has already been entered,
like a few months down the line..
View 2 Replies
View Related
Mar 9, 2005
I have scheduled a T-SQL job that runs every morning using Enterprise Manager. Now I want to change the SELECT and UPDATE statements that this job runs, but I can't find anywhere to edit a job that has already been scheduled. Any help would be appreciated.
Thanks
View 1 Replies
View Related
May 6, 2008
I keep getting "cannot update a timestamp column"!! How can I change the timestamp to all zeros? or can I not do that?
JOhn
View 4 Replies
View Related
Nov 16, 2007
Hi
I want to Enable Editing in the GridView
but there is a problem
the GridView take its data from 2 tables and I do this by the
build query
so I can't choose the " advance " button and check for enable update and delete statements
and when I try to build the update query in the update tap
I don't know what to write in the "new value" column
so how can enable editing in the GridView that take from
2 tables???????
please help me
and thanks
View 3 Replies
View Related
Feb 4, 2007
can someone help me why it produces an error....
error is: ERROR 22001 Microsoft ODBC SQL Server Driver SQL Server STRING or data of BINARY was cut short. ERROR 01000 Microsoft ODBC SQL Server Driver SQL Server statement was ended.
This is my code here for editing a record....
Protected Sub Button_save2_Click1(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button_save2.Click '||||| Create string connection Dim StrConn As String = "Dsn=MS_PKG01;UID=emiline;APP=Microsoft® Visual Studio® 2005;WSID=MSHNP200603;DATABASE=MS_PKG01;Trusted_Connection=Yes" '||||| Create connection object Dim MyConn As Odbc.OdbcConnection = New Odbc.OdbcConnection(StrConn)
'||||| Open connection MyConn.Open()
'|||| Create odbcCommand object Dim Update_record As New Odbc.OdbcCommand("UPDATE TM0001 SET TM0001.syain_name = ?, TM0001.syain_pass = ?, TM0001.office_id = ?, TM0001.birth_date = ?, TM0001.empl_date = ?, TM0001.user_iden = ? ", MyConn)
Dim hireYear As String Dim hireMonth As String Dim hireDay As String Dim date_hire As String
hireYear = DropDownList_hire_yr.Text hireMonth = DropDownList_hire_mo.Text hireDay = DropDownList_hire_day.Text
date_hire = hireYear + "/" + hireMonth + "/" + hireDay
'|||| Add command parameters Update_record.Parameters.Add("@P1", OdbcType.Char, 8).Value = TextBox_id.Text Update_record.Parameters.Add("@P2", OdbcType.Char, 20).Value = TextBox_name.Text Update_record.Parameters.Add("@P3", OdbcType.Char, 20).Value = TextBox_pswd.Text Update_record.Parameters.Add("@P3", OdbcType.Char, 40).Value = DropDownList_office.SelectedValue Update_record.Parameters.Add("@P3", OdbcType.Char, 2).Value = date_hire Update_record.Parameters.Add("@P3", OdbcType.Char, 10).Value = TextBox_bday.Text Update_record.Parameters.Add("@P3", OdbcType.Char, 1).Value = DropDownList_iden.SelectedValue
'|||| Execute command Update_record.ExecuteNonQuery()
'|||| Close connection MyConn.Close() End SubEnd Class
View 3 Replies
View Related
Feb 20, 2004
Hi,
I want to get (SELECT??) data from a db (SQL), edit the data (+1) and then update (UPDATE??) the table with the edited value. How do I get the value from the db and then edit it and then update the field in the db?? Does someone has an example so I get on the way??
Thanks,
Roel
View 9 Replies
View Related
Aug 15, 2005
Is there anyway possible to edit table design with data already entered in the table.If not, is there anyway I can cut and paste the info back in. Ive tried importing to access and then back to SQL, however, when i tried to view my table design in ASP.NET webmatrix, it gave me an error.
View 1 Replies
View Related
Mar 18, 2002
I've just created a new maintenance plan (sql2k sp2) and attempted to re-enter it to make a change. right click - choose properities (or double click)...I see the dialog box 'flash' very briefly but it's not making itself available for editing.
I've deleted and recreated the plan ... same result.
I _should be able to edit it, shouldn't I?
thankx
--steve...
View 1 Replies
View Related
