Whenever a certain stored procedure executes I need to email both admin and clients (different messages). I have created an error within the SP and can RAISE the error and thus notify admin staff but how can i email the client also ? I can obtain the cient email address from thye system but how can i email them ? Can i use xp_sendmail within a stored procedure ? If so, how as i can't seem to get it working ?
thanks for help
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
Hey,
I would like to set up a job to send mail out to clients on a semi-regular basis. Is there a way to mail directly from MS SQL.
or some application which I can set to interface with MS SQL and send these mails out.
I'm currently using asp.net, however, doing it through the web is very time consuming, I would much rather use some application to generate the mails on the server as it currently takes close to 20 min to send through the web interface (and that's only to 900 members, we are looking at having at least 2000 members in a few weeks). What am I looking for is something I can call perhaps with transact sql so I can run it through an ms sql server job, however any solution you have would be fantastic.
If you don't have specific details, that's fine, I'm not even sure what apps etc to look into, even a name of some technology to use (or does MS SQL have a way of doing all of this itself?)
Thanks a lot for your help, life saver ;-)
I need to send the output of a report generated, automatically through email as an attachment to some customer.Is it possible?Can anyone help?
View 1 Replies View RelatedHi everyone,
I am running SQL Server Enterprise Manager and i would like to have a query run everynite and send the results returned by the query off to an email address....
How can i do this?
Hi everyone I have a database that I am creating for another department. He emails applications to potential vendors. And I was wanting sql to do this for him. I was reading about xtended procedures XP_Sendmail, but this is the first time I have created an extended stored procedure. I need for it to email an attachment (the report)
View 1 Replies View RelatedI have a DTS package that runs 4x a day and generates an excel spreadsheet, renames that spreadsheet with a datetime stamp and then places it into a folder on our network. I have been asked to email that spreadsheet to someone everytime the package runs.
My question is what would be the best way to handle this and how do I ensure that whatever process I define grabs the correct file? The folder that the Excel file is being placed into has multiple files in it. Is there a way to tell SQL Server which file to grab and email?
Any thoughts or suggestions would be greatly appreciated! Thanks!
Frank
I'm sort of new to SSIS so I apologize if this is a trivial question:
I setup a package and want it to email me if there is any errors. Right now I got it working to send me a pre-written message about the failure, but I want to load the full task failure message into variable and email it on the email body.
But so far I have not found a way to save the error messages into variables so I can email them. Anyone can help with that one?
I need to export a view into excel and mail to my manager daily morning. Is there a way i can automate this process. I know how to convert view to excel but i need a better solution to automate this process with emailing to my mgr. Please suggest a better approach of doing this.
Thanks,
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies View RelatedI have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
Hi there!
Is there a way, I can setup create a script that I can schedule, which runs through my user databases and if e.g.:
1:) there is less than 20% free space it emails me.
and/or
2:) there is less than 200MB free space
it emails me.
Cheers
Henrik Hansen
Is there a way to have SQL server email the results of a Select query to someone?
View 1 Replies View RelatedHi,
Is there a built in capability with sql server 2005 which sends emails to users upon a record insertion.
Thanks
Hi ,
Is it possible for us to send an excel file generated in the package to the users using Sendmail task or anyother task using SSIS?
Any help is greatly appreciated.
Thanks,
SVGP.
Hello,
I am trying to use €œSQL Server Business Intelligence Development Studio€? (what is the short name for this) to complete a check and then possibly email me depending on what happens.
The check is around two tables that I have. There is a chance that they will become out of sync with each other and so I want to know when a field (ACCOUNTID) has a value that is in one table and not the other. I can do the check but I would like the package to email me when there is a problem (and if possible email me the details) and do nothing when everything is OK.
Can anybody give me some hints to point me in the correct direction as I just seem to be chasing my tail at the moment,
Thanks,
Hello!
The problem is this.
I have many short messages in a table. I need to tigh them together in one long email message and email to the users.
But xp_sendmail is limited to 7,790.
How could I send longer messages? Or how could I devide the long message and send it in parts (i.e. separate consequtive emails)?
This doesn't work, it still cuts the messages off at around 7,790:
E. Send messages longer than 7,990 characters
This example shows how to send a message longer than 7,990 characters. Because message is limited to the length of a varchar (less row overhead, as are all stored procedure parameters), this example writes the long message into a global temporary table consisting of a single text column. The contents of this temporary table are then sent in mail using the @query parameter. CREATE TABLE ##texttab (c1 text)
INSERT ##texttab values ('Put your long message here.')
DECLARE @cmd varchar(56)
SET @cmd = 'SELECT c1 FROM ##texttab'
EXEC master.dbo.xp_sendmail 'robertk',
@query = @cmd, @no_header= 'TRUE'
DROP TABLE ##texttab
Hi Rafael,
I need to create a new excel file daily and then need to mail it.
The problem iam facing is that ,when i schedule a job the task that dumps data into excel(Dataflow task ) gives a validation error.Everytime i need to manually link the sheets of the excel to the corresponding tables.
Any idea why this is happening?So iam unable to schedule as a job...
Thanks,
Vani.
Hi All
I'm hoping someone here will be able to guide me in the right direction. I am trying to figure out a way of looping through table columns or a flat file in which there will be three parameters every time. With these parameters I am then wanting to run a report using two of these parameters to feed into the report and then email this out to an email address which would be my third parameter. Does anyone here have any idea how I would go about doing this?
Many thanks in advance.
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
I have downloaded MS's performance dashboard report and installed. I wanted these report should automatically send the performance report to my email.
View 1 Replies View RelatedI am trying to create an alert when there are more than 2500 connections to our ailing SQL Server.However, for now, I need to restart the SQL server service because users begin complaining they can't connect.
1) I created an operator - me.
2) I created a job which runs a query.
INSERT INTO Sessions_alert
SELECT host_name, program_name, login_name, count(c.session_id ) num_sessions, getdate()
FROM sys.dm_exec_connections c JOIN sys.dm_exec_sessions s on c.session_id = s.session_id
GROUP BY host_name,program_name,login_name ORDER BY 4 DESC
3) I created an alert - included the job from above. Type performance condition alert. Object - SQL Server General Statistics. Counter - User connections.Alert if counter rises above 50. Just testing. I really want to know when it gets past 2500.
4) I've set the alert to email and delay is between responses 2 minutes.
It history tables says number of occurences is 18964. However, I don't receive an email.
Shouldn't the alert send an email? Do I need to include email code in the job?
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
I want to send a deployed report (report manager), through email, by calling reportingServices webservice. But the requirement is that, time is not fixed for sending this email, so I want to trigger the sending of report as a one time event, no subscription to a daily time...
How should I go about it?
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
Any help on this would be appreciated.
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies View RelatedI have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
This is the Stored Procedure below ->
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/2/2007 4:52:19 PM ******/
CREATE PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
IF (@i_WildCardFlag=0)BEGIN
SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
Please help me regarding the same.
Thanks in advance.
Sandeep Kumar