Enable To Start The Sql ENTERPRISE MANAGER
Jul 31, 2006Can any one help me to solve this problem, I WAS ENABLE TO START THE Sql ENTERPRISE MANAGER
View 7 Replies
ADVERTISEMENT
Enterprise Manager Wont Start
Feb 20, 2006sql 7.0
unable to start the enterprise manager.
getting "sqlctr70.dll errors"
cannot restore databases until enterprise comes back up.... any ideas????
Failed To Start SQL Mail Session In Enterprise Manager
Jun 5, 2001I cannot understand why I cannot get my sql mail to work properly. It was working fine a couple of days ago. My mail profile is setup using Outlook. The only problem is that when I go to services and check the Mssqlserver & sqlserveragent, they are now logging in as the system account, but when I attempt to change them to the administrator account it says error 1057 occured: the account name is invalid or does not exist, yet it does. Anyone have any idea how to rectify this? this is what is on the error log:Error: 17919, Severity: 18, State: 1
2001-06-05 14:09:16.33 ods Invalid session..
2001-06-05 14:09:16.34 ods Error: 17951, Severity: 18, State: 1
2001-06-05 14:09:16.34 ods Failed to start SQL Mail session..
Thanks,
Jerry
SQL Server Enterprise Manager Could Not Start The Service 'MSDTC'
Jul 20, 2005SQL Server Enterprise Manager could not start the service 'MSDTC' on server'NTAS21'.1722 - (The RPC server is unavailable)I Setup A publication on a server called NTAS4D, then Pushed TheSubscription to another server called NTAS21. If I configure so that thechanges at the subscriber are not replicated to the publisher, all works ok,I make a change at the publisher, it is replicated to the subscriber.If I configure for updating at the subscriber, I am presented with a screenstating that the following services must be started for replication to work:SQL Server Agent on NTAS4D - RunningMSDTC on NTAS4D - RunningMSDTC on NTAS21 - UnknownWhen I complete the wizard, I receive the message listed above.The Servers are in two separate locations, each behind a NAT enabled routerusing the internet to transfer data between the publisher and subscriber.Any Suggestions will be greatly appreciated.ThanksSteve
View 1 Replies View RelatedProblems Running Enterprise Manager And Service Manager
Jul 20, 2005On one of our machines, all of the SQL Server 2000components except for the main Server component (SQL Servercore) itself were installed (Management tools, etc) a while agoand everything was running fine. Now I go and add/install theServer component and then Service Pack 3a.It seems that Service Manager won't start up (I get an hourglass cursor)and now I find that Enterprise Manager won't run as well. No errormessages appeared and I don't think I saw anything unusual inthe log file.However, I can use Enterprise Manager on a differentmachine and connect to the database (so the databaseitself seems to be running).Any suggestions as to what the problem might be and how tofix it? I like to see if I can repair this without havingto do a reinstall.Thanks.PF
View 2 Replies View RelatedHelp! Enterprise Manager Turns SQL Server Service Manager Off
Dec 6, 2006IF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
View 2 Replies View RelatedCannot Start DTC In Enterprise Mgr
Jul 12, 2006Hello, experts!
On Sunday, as part of routine maintenance, we had to shut down our clustered servers. When we tried to bring them back up, they would not recognize our array unless we disabled the cluster service. It was agreed that we should disable the cluster service (it's caused nothing but problems due to poor implementation and vendor software support), but now we're having difficulties with SQL Server. We're having several "small" problems (i.e. unable to remove our old instance of SQL Server), but the main issue is that our client cannot connect to our server. They are able to ping us and connect to our development database (not affected by the failure), but cannot connect to the production database. Currently, the most obvious difference between production and development is that development displays a green icon (running) for both Distributed Transaction Coordinator and Full-Text Search in Support Services (Enterprise Mgr), whereas production has a red (stopped) icon for both. Also, we previously identified that MSDTC was not running and that it was inaccessible in Component Services, so we uninstalled and reinstalled. We were then able to access MSDTC in Component Services. That said, when I attempt to start DTC or Full-Text Search in Support Services, I receive the following error message:
An error 1722 - (The RPC server is unavailable) occurred while performing this service operation on the MSDTC service.
I've troubleshot this error message and verified that both RPC and DTC are started in the Services menu, that both services are set to start automatically and that both are using "Network Service" login. At this point, I have no idea what could possibly be causing this problem or if this could even be related to our client's inability to connect to our SQL database. We're running SQL Server 2000 SP4 on Win Server 2003 Dell machines. Any assistance is much appreciated.
Thanks!
How To Start Work In SQL Server 2005 Enterprise Edition
Feb 28, 2006Hi all,
I am new to SQL server. I just installed SQL Server 2005 enterprise edition .
I have not more experience in SQL but I need some tutorial about how to use SQL Server 2005 and create tables and make queries and relate tables . I can't find any exact location in Microsoft website about SQL Server enterprise edition and documentation where i can find beginner's resources. which feature we use for creating the tables and other features for making the database.
Can anyone please give me the location.
Thanks
How To Start Work In SQL Server 2005 Enterprise Edition
Feb 28, 2006
Hi all,
I am new to SQL server. I just installed SQL Server 2005 enterprise edition .
I have not more experience in SQL but I need some tutorial about how to use SQL Server 2005 and create tables and make queries and relate tables . I can't find any exact location in Microsoft website about SQL Server enterprise edition and documentation where i can find beginner's resources. which feature we use for creating the tables and other features for making the database.
Can anyone please give me the location.
Thanks
Asp.net Enterprise Manager
Nov 30, 2006Hi
has anyone used this tool to upload sql databases to a web host
i'm struggling
cheers!!!
Adrian
Where Is Enterprise Manager?
Sep 10, 2005I installed SQL Server MSDE 2000 but I can't find how to start it. Does this package include an Enterprise Manager or not? I thought that maybe it was a standard XP Pro feature. I had no problem finding it in W2000 Pro.
View 1 Replies View RelatedEnterprise Manager
Mar 21, 2001When I open databases, there is nothing there - not even Master, Model, Temp, Pubs, etc.
When I open the query analyzer, however, they all appear in the drop down.
What is up with that? and how can I remedy?
OP sys:Win98
SQL Server 7
Enterprise Manager
Jun 11, 2001Has anyone encountered this error: When you are in Enterprise manager and you select a database then the tables tab and then you select a table and go to open table- select all rows, I get an error--An unexpected error happened during this operation-Query Designer encountered a query error! Please let me know if you have seen this. Also, when I access this from one networked computer I get the same error, then when I access it from another I do not!! The servers are interacting with Pivotal. The one that works does not!!
View 3 Replies View RelatedEnterprise Manager
Jun 12, 2001Hi all,
I have SQL 7.0 desktop addition installed on my local win NT workstation. I am able to connect to my local server using Quary Analyser but when i am trying to connect using EM, i am not able to connect. I am receiveing the following error message.
__________________________________________________ ___________________________
A conncetion could not be established to "servername" - Specified SQL Server not found. ConnectionOpen(CreateFile()).
Please verify SQL server is running and check your SQL Server registration properties(by right clicking "servername" node) and try again.
__________________________________________________ ___________________________
I have tried as said in the error message and also tried connecting with "sa" but its not working. I can see that the server is running and i am able to connect through QA.
any help is highly appriciated.
Enterprise Manager
Jun 20, 2001We can no longer open tables in EM. The error message is;
An unexpected error happened during this operation
[Query] - Query Designer encountered a Query error:
Unspecified error
The tables are fine - can access them other ways.It looks as if the fault is in the script used by EM. Anyway to clear this ??
Enterprise Manager
Sep 26, 2001I am fairly new sql dba in a company and I am sure Enterprise Manager is installed on PC's and it shouldn't. Is there a way of finding out other then visiting each workstation. Thanks in advance..
View 1 Replies View RelatedSQL 7 Enterprise Manager
Jul 28, 2000I am considering upsizing my Access 2000 DB to a SQL 7 server. I was told that having SQL 7 Enterprise Manager is highly prefferd but not essential as I can maintain the upsized DB with Access 2000. The only way that I have been able to find JUST enterprise manager seems to be with purchasing the whole SQL 7 program for $1300! Microsoft cannot be that cruel, that you have to buy the whole program just for Enterprise Manager!
My questions are:
Can I download just MS SQL 7 Enterprise Manager anywhere for a reasonable fee or free?
and
if not, can I continue to use Access 2000 to maintain the SQL 7 upsized DB?
SQL Enterprise Manager
Jan 25, 2001I have access to a SQL 7 server via my ISP Hosting account. I know Enterprise manager comes with the server software, but how can I get a copy of JUST Enterprise Manager?
JD
SQL Enterprise Manager
Apr 17, 2000Is non-SA account able to view the SQL Enterprise Manager?
Thanks in advance!
Plum
SQL Enterprise Manager
Aug 3, 1998Is it possible to administer both 6.5 and 7.0 databases from the same SQL Enterprise Manager? I have read that you cannot do this because the 7.0 "plug-in" to the MMC wont work with 6.5 databases.
View 2 Replies View RelatedEnterprise Manager
Nov 8, 2001We had database corruption and cannot access the Enterprise Manager. DBCC returned errors 9000 to 9999 which I can't get any suggestions on how to handle from BOL. Any ideas!!!!! Thanks.
View 4 Replies View RelatedEnterprise Manager
Mar 13, 2001Hi,
I would like to know if we can present users to access details database information about the databases on a server through Enterprise Manager.
If you create a SQL login and do NOT give it access to any database, if someone logons on your server with enterprise manager, even though he does not have access to any database, he will still see the list of all database on your servers plus tons of sensitive information like database owner.
Is is possible to limit enterprise manager to only view information about database that the user has access to?
Thanks
Mark
Enterprise Manager 6.5
Nov 26, 1999How can I force users of Ent Manager 6.5 to enter a name/password when connecting to a server that has been registered? I dont want to use the sa name and password so that anyone could use my workstation to access our servers.
View 2 Replies View RelatedSQL Enterprise Manager
Oct 10, 2003Does anyone know how to turn off or disable the auto discovery for Enterprise Manager. Apparently our Network group is complaining that Enterprise Manager is generating noise on the network, it is not signifcant in volume but they complain it impacts there ability to detect hacking attempts on our network because it causes some false positives. I generally keep Enterprise Manager running because I will always have some manual job running from it and we have so many servers it takes awhile for them to all load when I first fire it up.
Thomas
SQL Enterprise Manager
Dec 26, 2007Hello guys,
Just wondering if i can use CPU, Memory usage, I/O or wait events for SQL trace. I am having difficulty in finding theses events on SQL trace.
Also is it possible to show the SQL trace file output in graphical format.
Thanks
Enterprise Manager Bug
Jul 16, 2002Hi,
I have SQL server 2000 client machine on my XP desktop which worked fine
until yesterday.
Yesterday, I tried to set up client access (a tool from IBM to access AS400) unsuccesfully. Since ever, Each time I try to open a table in enterprise manager, I get the following error message
"The query cannot be executed because some files are either missing or not
registered. Run setup again to make sure the required files are registered".
While when I issue a query in analyzer it works fine.
I did that several times without success. Even, I removed the whole SQL 2000
setup, rebooted my machine, ran set up again for client tools which gave the
same result. Also, I re-setup MDAC2.6 SP2 but no way.
Which files are corrupted ?and I don't understand after doing all that,
setup goes smoothly without indicating any errors, but still when you open a
table in enterprise manager, it gives the same error.
Thanks in advance
MS SQL Enterprise Manager Bug
Nov 15, 2004Hi,
Using MS SQL Server 7. When I go into a table in design view and order by date created, it only orders on the day and not the date (Enterprise Manager) e.g.
29/08/1981, 11/12/2004, 31/12/2003
should be
11/12/2004
31/12/2003
29/08/1981
but it's this instead
31/12/2003
29/08/1981
11/12/2004
Please help.... is this a bug
Enterprise Manager
Jun 7, 2006Hi,
My Question is regarding the Query Analyzer.
When we click on the Query Analyzer Shortcut, it will prompt for a user id and password.but when we expand the databases node from EM and clicks on Tools->Query Analyzer Menu, after selecting a database node, the QA does not prompt for the user id and password. Can any one explain this behaviour of QA..
I am using Mixed mode authentication for my db server.
Enterprise Manager
Jun 19, 2007Hi All,
When I view the database properties using Enterprise Manager, some of the databases on the server are reporting that there is zero space available while others have space available. Does anybody know why?
Need SQL 7 Enterprise Manager
Feb 28, 2004Does anyone know where I can get a copy of Enterprise Manager? I have the trial copy of 2000, but I need to administer data on a SQL 7 server, and I cannot create stored procedures, add users, or create DTS packages in 2000 that will work on SQL 7.
Thanks!
SQL Enterprise Manager
Sep 18, 2005Is it possible to add custom columns to the design table interface.
For example could I add custom column for some data on want to store under a table column. I am used to vb.net and I am able to add custom properties to a control. Is this type of customization possible for SQL Server. Is it possible to add a custom tab to the tab control where columns are located at the bottom of the designer?
Enterprise Manager
Apr 19, 2006I installed SQL Server Developer Edition on Windows 2003 server for our sales force.
I don't want them to have acces to enterprise Manager and Query Analyser.
How to disable these?
Thx
Venu
Help Please SQL Enterprise Manager.
Sep 15, 2006Hi all, I am not over familiar with SQL, I am a VB Programmer, however I need to achieve the following.
In Enterprise Manager I have 2 tables A and B.
I need to get a column from A and then scan the entire contents of B to see whether the content, the value from the column in A actually exists in B. The get the next value from A and repeat the process.
Any Help Would be appreciated.
Many Thanks