I am using SQL Server 6.5. By default TCP/IP protocol is not enabled (1433 port is not opened by the server). How can I enable this so that I can use a JDBC driver to connect to it.
In SQL Server 2000, the "SQL Server Network Utility" helps us to enable the TCP/IP protocol. But not able to figure our how/where this can be done in 6.5.
Thanks for any help
I am loading data from one server to another server using SSIS,After loading some rows i am getting the below mentioned Error.Each time i run i am getting the error in different Dataflow tasks in the package.
Error :
"
[OLE DB Source [199]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.There may be error messages posted before this with more information about the failure.".IS this SSIS package Error or Network related?
Can anyone help with this problem?
I have a green light on my Report Services Confuration, and can configure the server within sharepoint integrated mode. I have also assign the appropriate permission for aspnet etc..etc.
From within Business Intelligent studio when I tried to publish my reports I get the below error:
The server commited a protocol violation
Here is a copy of the report server services log file.
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product>
<Locale>en-US</Locale>
<TimeZone>GMT Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerService__main_06_21_2007_10_47_38.log</Path>
<SystemName>DMTXDW01VM2</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!servicecontroller!9!21/06/2007-10:47:46:: i INFO: Total Physical memory: 1073094656
ReportingServicesService!servicecontroller!4!21/06/2007-10:47:47:: i INFO: RPC Server started. Endpoint name ='ReportingServices$MSSQL.3'
Urgent help required!
I've been reading about the protocols and i've been trying to connect to my SQL SERVER using each one of the protocols, but i think I'm missing something, i dont have any problems using Shared Memory and TCP protocols, but I'm not pretty sure how to connect to my remote SQL SERVER using NAMED PIPES protocols. The books On Line of Microsoft refer that you can connect using this protocol using the next syntax: Connecting to a default instance by specifying a named pipe name:
APPHOSTpipeunitapp
Connecting to a named instance by specifying a named pipe name:
APPHOSTpipeMSSQL$SQLEXPRESSSQLquery
Connecting to default instance by name, forcing a named pipes connection:
np:APPHOST
Connecting to named instance by name, forcing a named pipes connection:
np:APPHOSTSQLEXPRESS
But I can't connect to my remote SQL SERVER, if i try the same with my local SQL SERVER i don't have any problems. I've been reading the articles so many times searching something about Named Pipes is only for local connections, but Microsoft say that it's posible to connect to a remote SQL SERVER, but i don't know how to do that. The firewall is disabled, I changed the APPHOST in the above syntax for the IP address of my SQL SERVER but it didn't work..
helloi use Visual Web Developer and SQL server 2005 express , how can i enable service borker of my sql server ?thaks for any helpderin
View 1 Replies View RelatedI have log shipping enabled on databases(primary and secondary) and works fine. I need to implement TDE on the database. I have experience on implementing TDE on databases which are not used for log-shipping.
What are the steps needed to setup TDE which are involved with log-shipping.
we wonder about the tradeoffs of t-sql vs clr in sql server 2005 especially from a memory perspective. Is there documentation available on this subject?
View 8 Replies View RelatedHi ,
How do we install a certificate for enabling security on MS -SQL Server 2005?
I tried to install through MMC but it says no " certificate authority found " . Any
help will be highly appreciated , Thanks to you all in advance :-)
Best Regards,
Sudhansu Tiwari
I am trying to enable CDC feature in SQL Server 2012 Enterprise Edition ( 11.0.2424.0).The command to enable CDC for Database worked fine, but the command for enabling CDC on Table failed.Command used for enabling CDC on table is as follows.
USE DatabaseName
GO
EXEC sys.sp_cdc_enable_table
@source_schema = N'dbo',
@source_name = N'TableName',
@role_name = NULL,
@supports_net_changes = 1
Following is the error message got
Msg 22832, Level 16, State 1, Procedure sp_cdc_enable_table_internal, Line 623...Could not update the metadata that indicates table [dbo].[TableName] is enabled for Change Data Capture. The failure occurred when executing the command '[sys].[sp_cdc_add_job] @job_type = N'capture''. The error returned was 22836: 'Could not update the metadata for database DatabaseName to indicate that a Change Data Capture job has been added. The failure occurred when executing the command 'sp_add_ jobstep_ internal'. The error returned was 14234: 'The specified '@server' is invalid (valid values are returned by sp_helpserver).'. Use the action and error to determine the cause of the failure and resubmit the request.'. Use the action and error to determine the cause of the failure and resubmit the request.
SSISDB 2014 - Enabling CLR - Is there are kind of security risks for enabling CLR when creating SSISDB?
View 0 Replies View RelatedHi
I have an existing instance of sql express 2005 w/advanced services installed. When I installed I did not install full text search. Is there a way I can enable full text search on this existing instance?
Thanks
We are planning to 2014 migration in few days.
ServerA----- ServerA1
ServerB---- ServerB1
In serverA we have 5databases. And making 5databases as availability group. The replica is ServerA1
In server B we have 3 databases. And the making those 3 databases as an availibility group. The secondary replica is ServerB1.
What is the best option to configure the quoram drive in this situation.
Also Server A1 & Server B1 also we use for reporting purposes.
We have some sensitive data. Is it possible to delete the data while reading the data?
How the memory optimization feature work with always on?
I'm trying to activate FILESTREAM on my SQL Server 2012, however i'm not accomplishing it. I've tried to follow this instructions: [URL] ...
My SETUP is the following:
Windows 8 (64 bit)SQL Server Standard Edition - Service Pack 1 (64 bit)SQL Version: (11.0.3128.0)
When I go to the configuration manager, on the FILESTREAM tab has a message:
"A previous FILESTREAM configuration attempt was incomplete.
FILESTREAM may be in an inconsistent state until re-configured."
If I click Enable FILESTREAM and "Apply", I get the following message:
"There was an unknown error applying the FILESTREAM settings. Check the parameters are valid. (0x80070002)"
I also read somewhere to run "EXEC sp_configure", which produces the result:
"filestream access level - 0 2 2 0"
Running "SELECT SERVERPROPERTY ('FilestreamEffectiveLevel');" returns 0.
I
am using SQLServer 2005 and .NET when I use the following
statements:
using (TransactionScope
objTransaccion = new TransactionScope(TransactionScopeOption.Required))
...
objTransaccion.Complete();
I
get the following error:
System.Transactions.TransactionManagerCommunicationException:
Network access for Distributed Transaction
Manager (MSDTC) has been disabled.
Please enable DTC for network access in the
security configuration for MSDTC using the Component Services Administrative
tool. (Exception from HRESULT: 0x8004D024)
I
am trying to enable the DTC on Windows 2000 Server but the references seem to
be to Windows 2003 Server. Any
idea on how to do it on 2k Server?
TIA, Brad.-
Hi,
In a stored procedure I have, I need to make a call out to a DR server, I believe the named pipes protocol is causing errors for long running sql. Is there anyway I can change the call
exec svr_dr.msdb.go
to ensure that it uses the tcp protocol rather than named pipes?
Thanks,
JS
Hi everyone,
I want to use TCP/IP network protocol on the server and have my clients using TCP/IP Net library. I have having some problems with this...The server will not register if I only have TCP/IP without Named Pipes using Standard Security in SQL Server. If I have TCP/IP and Named Pipes, the client can't register the server. Can someone explain in detail to me on using TCPIP on the server and client?
Thanks...
Has anyone ever seen TCP/IP become a disabled protocol without manual intervention from a user?
My websites just stopped talking to my MSSQL db and when I went into sql client config utility on the web boxes, tcp/ip was disabled. Any clues? Can't find anything to support this in the event or web logs.
If using sql server authentication between two SQL Server instances (firewalled and on different networks),how are the connection details transported, specifically, is the IP addess, username and password sent in clear or is their some internal obsfuscation/de-obsfuscation mechanism native to SQL Server in operation under the covers?
View 1 Replies View RelatedI am connection to a SQL server that has force protocol encryption checked. From my ASP.net application, specifically in my connection string, what parameter do I need to use to take advantage of this encryption?
Thanks!
Hi everybody,
I dont know if this is the right place to put in this question.
The problem is
I have an application developed using VB 6.0 and SQl Server 2000. It was working fine on my machine. I had MS XP installed on my system alongwith SP1. But when i installed MS XP SP2, i got the error while saving the record.
the error is
"Protocol Error in TDS Stream".
I went to microsoft site searcing for the resolution of this error. They gave the solution of installing MDAC 2.8 SP1. But when i install MDAC 2.8, it gives me this error
"MDAC 2.8 RTM is incompatible with this version of Windows. All of its features are currently part of Windows."
And since MDAC 2.8 is not installed so i can not install MDAC 2.8 SP1 also.
I have MDAC 2.5 installed on the system.
How can i resolve it. Please give a solution as soon as possible. I am in great need of it.
Can anyone point to a reference which documents the pros and cons of the various connection protocols, such as Shared Memory vs. TCP/IP? I thought I saw something indicating that shared memory is fastest, which would explain why this protocol is tried first, but now I can't find it. This resource has information on creating connection strings, but not the advantages and disadvantages.
http://msdn2.microsoft.com/en-us/library/ms187662.aspx
hi all,
Happy new year!
is anybody here familiar with the different informix ODBC protocol
such as Sesoctcp and onsoctcp and the rest of the protocols
I think my SSIS design is affected by this protocols i'm having problems with
the unicode and non unicode conversion.
many many thanks
Joey
Hello,
I cannot connect to a SQL Server that is in domain "x" from my client which is in domain "y" using
Multi-Protocol. There is no trust between domains x and y. The SQL Server has Multi-Protocol installed and is working
correctly ie. I can connect to it from other clients in the same domin via Multi-Protocol.
I have tried multiple things to make this work. Adding the SQL Server to my LMHOST file. Adding advanced settings for the
SQL Server in my "SQL Client Configuration Utility".......All with no avail. I have received different error messages which I have
found little about. "ConnectionOpen (RPC open())", "OS ERROR 1703", "OS ERROR 11".......
Has anyone had similar problems? If so, is there a fix or something that I could be missing?
Thanks in Advance!!
Tim
Hello ,My question is:does ms sql support two phase commit protocol?and Why if no.How if yes.Thank you
View 2 Replies View RelatedOur client is trying to access the report builder from there machine via a proxy and it does not work, What would be all the ports and protocol (http,https,ftp) needed to be open for the report builder application to work normally behind a proxy? or does anyone know what are the ports and protocol used by report builder ? because we need to provide this information to our client so they can access our report server.
Chi.
I have a 2 node SQL Server 2005 cluster with 2 named instances. Both appear
to be working properly with no issues but I have the following warning
message in the event viewer and I would like to know if it is something I
should be worried about.
Source: SQL Browser
Type: Warning
Category: None
User: N/A
Description: The configuration of the AdminConnectionTCP protocol in the
SQL instance XX is not valid.
The servers in the cluster are running with Windows Server 2003 X64 Enterprise
Edition, SQL 2005 Enterprise Edition SP2 X64.
I have failed the cluster over and I continue to get the message when I
start the instances in the cluster admin, but I don't appear to have any
other symptons. Client machines can connect without any problem and
transactional replication works no matter what node I bring the instance up
on.
I changed default TCP/IP port and disable/enable Named pipes, but no luck so far.
I see lots of postings about this message but it seems to be related to
SQLExpress and I am not using that here.
Any info would be appreciated.
Scenario: Private SQL server that has a v6 public facing address. How can I disable the interface over my public address only but keep functionality over the local address?
IP1: 192.0.0.1
Active: Yes
IP2: 2600::5
Active: Yes
IP3: fc2e::5
Active: Yes
When I try to change IP1 and IP2 to Active: No it tells me file is read only.
Hello,
I am getting the following warning in the Application Event Log:
The configuration of the AdminConnectionTCP protocol in the SQL instance SQLEXPRESS is not valid.
The warning is logged by the SQLBrowser service.
This is happening on Windows 2003 server with SQL Server Express 2005. On the same machine SQL Server 2000 is installed.
I am currently unable to connect from remote clients to the instance of SQL Express and I believe it has to do with this warning (I've tried all the usual remote connection troubleshooting without success - enabled protocols, SQL Browser Service running, there is no firewall on the server, I disabled firewall on the client when trying to connect).
Does anyone know how to resolve this issue?
If you need additional information please let me know.
I am accessing a SQL2005 Express SP1 Server via TCP/IP (all machines fully up to date with windows update). For ease of configuration the Server IP is mapped to an Alias in Native Client Configuration Manager. On the Client Force Protocol Encryption is set to Yes and Trust Server Certificate is set to No. The clients are accessing the DB via SQL 2005 Management studio express and Ms Access 2003 (an access adp front end to the sql database).
As a test i turned off force encryption on the server. A Network trace shows no encryption! Turning on force encryption on the server corrects this.
As a further test I configured the server with a certificate the client doesn't trust. No error is generated by the un-trusted certificate! The only way to generate the certificate error is to enable encryption in the connection properties of each application. Why isn't the Native Client Configuration Manager utility enforcing this???
This brings me on to a second (off-topic problem). In my access adp file, if I enable €œuse encryption for data€? advanced option under the database connection dialog all works as expected (encryption + certificate verification). However, I am programmatically updating the connection in VBA
Application.CurrentProject.OpenConnection "Provider=SQLOLEDB.1;Data Source=AliasName;Use Encryption for Data=True;..."
If I do this no encryption is enabled!!! Access seems to just ignore the encryption statement.
Has anybody got any ideas as to why either of these issues are occurring or if there are any workarounds?
Thanks
Stuart
I was installing application software that was trying to install SQL Server 2005 and received the following error message.
"Setup failed because Service MSSQLServerADHelper is disabled for the current hardware profile. Services must be set with the current Hardware Profile logon property profile enabled."
Simple fix for most but I do not know how to do what it asks.
Thanks, Bruce
Hi All,
I'm new to SQL Server Express. But I need to find out how easy it is to create custom types with SQL Server Express because we have to represent house numbers as a custom type in the database. After enabling the CLR integration with the SQL Server Surface Area Configuration tool, I created an SQL Server Project with VS 2005 Pro., created a custom type called HouseNo, deployed it to a database and finally created a table with a column of that custom type. But when I tried to use the option 'Show Table Data' for that table, the following errors always appeared
SQL Execution Error
Executed SQL statement SELECT NP.ToString() AS NP From Table1
Error Source : .NET SqlClient Data Provider
Error Message : Execution of user code in the .NET Framework is disabled. Enable "CLR Enabled" configuration Option. -- I think I've already enabled it.
Does anyone know how to solve the problem? Just one more question, for a custom type implementing the IComparable interface, would SQL Server Express uses the CompareTo method to perform sorting?
Thanks!
Regards,
Nathan
----------------------------------------------------------------------------------------------
The SQL Server Epxress is newest and the following is code for the custom type.
---------------------------------------------------------------------------------------------
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
[Serializable]
[Microsoft.SqlServer.Server.SqlUserDefinedType(Format.UserDefined, IsByteOrdered = true, MaxByteSize = 8000)]
public class HouseNo : INullable, IComparable, IBinarySerialize
{
// Private member
private String number;
private String letter;
private bool m_Null;
public HouseNo()
{
Number = "0";
Letter = "0";
}
public HouseNo(String number, String letter)
{
Number = number;
Letter = letter;
}
public string Number
{
get { return number; }
set { number = value; }
}
public string Letter
{
get { return letter; }
set { letter = value; }
}
public int CompareTo(Object obj)
{
if (obj is HouseNo)
{
HouseNo hno = (HouseNo) obj;
int numCompare = Number.CompareTo(hno.Number);
return (numCompare == 0 ? Letter.CompareTo(hno.Letter) : numCompare);
}
else throw new Exception("Obj is not a HouseNo");
}
public override string ToString()
{
// Replace the following code with your code
return Number+Letter;
}
public bool IsNull
{
get
{
// Put your code here
return m_Null;
}
}
public static HouseNo Null
{
get
{
HouseNo h = new HouseNo();
h.m_Null = true;
return h;
}
}
public static HouseNo Parse(SqlString s)
{
if (s.IsNull)
return Null;
HouseNo u = new HouseNo();
// Put your code here
return u;
}
#region IBinarySerialize Members
public void Read(System.IO.BinaryReader r)
{
Number = r.ReadString();
Letter = r.ReadString();
}
public void Write(System.IO.BinaryWriter w)
{
w.Write(Number);
w.Write(Letter);
}
#endregion
}
I'm trying to enable the Service Broker for Sql Server 2005 because I want to be able to use a SqlDependency object.
I ran the following query to see if my local sql server service broker was enabled:
SELECT is_broker_enabled FROM sys.databases WHERE name = 'dbname';
It came back with a value of 0 (which means it is not enabled).
I tried executing the following sql command to enable it:
ALTER DATABASE dbname SET ENABLE_BROKER;
The query has been running for over 5 mins and just keeps spinning (should it take this long to enable the Service brfoker), so I cancel it.
I even try to issue the command to see if the service broker is enabled after I cancel the query and it is not enabled.
How can I properly enable the Service Broker?
Hi all,
We have a remote server which runs SQL server 2000 DEV edition. We have 4 databases running in it. Our application needs the feature of Full Text Search in all the four databases. We have installed the necessary services. The problem is that we are able to create FTS on one database but when we try to run FTS on other databases the MSSearch service stops. on restarting it mssql stops. we are not able to do FTS on more than one database.
We had tried the same in our local server but it is working fine. The only difference between the two is that the local machine are member server. Has this to do anything with the FTS? Meanwhile the eventviewer doent help much, it just tells that the mssearch engine has stopped unexpectedly and it has done this 'n' time.
Please help
Thanks
Smitha