I have 2 tasks. Both of them were set for EncryptSensitiveWithPassword. One of them prompts for the password when inporting to the server and again when the job is scheduled. it puts the DECRYPT statement in the config line. Everything works as it should.
The second task does not prompt for the password at any time. There is no DECRYPT statement added and the task fails to run.
WTF is going on????
I posted this earlier but did not get a sufficient response.
I have 2 tasks. Both of them were set for EncryptSensitiveWithPassword. One of them prompts for the password when inporting to the server and again when the job is scheduled. it puts the DECRYPT statement in the config line. Everything works as it should.
The second task does not prompt for the password at any time. There is no DECRYPT statement added and the task fails to run.
I have deleted the task and recreated it. I have used dtutil and forced the password. In any case I CANNOT get the job scheduler to see a password is required and add the DECRYPT line, hence I can't execute the tasks.
WTF is going on????
After publishing report on server and accessing it from URL its prompting for the USER ID and pAssword of Admin user of the server. Have tried to find the Virtual Directory of the Reporting server on IIS - which is not available. or unable to find the same. Apart from this have saved the Database credential in the report itself.
View 5 Replies View RelatedOur SSIS packages use the Web Service Task to call services to send email and write package failure data to a department wide database. These Web Service Calls are failing with HTTP 401 errors. It was caused by the passwords for the HTTP connections not being saved when the SSIS pkgs were saved to .dtsx files. I have tried saving the package with a password and the EncryptSensitiveWithPassword protection option. This password can be supplied when the package is called from another package or a package is executed in Visual Studio but cannot be supplied to DTexec to execute the package in a job. DTexec does have a /Password parameter but it is rejected if the package is loaded from a .dtsx file.
This appears to be a bug in DTexec. It only accepts the /Password parameter when the package is loaded with the /SQL option. Specifying /Password and /File is not supported.
Is this a known bug? Are there any workarounds?
Has anyone successfully called a Web Service from SSIS executed via DTexec?
Hi,
I am migrating few my oracle codes to T-SQL. Currently am using & (ampersand) interactive prompt of SQLPlus. Is there any equivalent for the above said in SQL Server.
-Cheeku
please, how to promt user in mu sql 2005 script? For example, I need user toconfirm some operations.. .Thx in advance
View 10 Replies View RelatedA colleague of mine is having problems when trying to schedule package execution via a .bat file that executes a .dtsx on a sql server (not file system). The scheduling system that is employed by the company requires a .bat file to execute the package. The packages themselves move data from AS400 servers to SQL Servers. Occasionally (very randomly) when the scheduling system runs the statement in the bat files, the package prompts for password information (for connectivity).
We've tried a number of solutions to this, mostly on the "ProtectionLevel" property of the package itself. We did some research and it seems as though there are a few options.What is the best solution to eliminate this from happening? We certainly don't want to have people checking to make sure the packages don't prompt for passwords.
Thanks.
Is it possible in Reporting Services to prompt a user for dates that can then be used to do calculations?
My PC is in the domain group of SQL Server 2005 Reporting Service, so I can publish the reports. After the reports were published, I can viw the reports from ASP.NET application on the web server, but everyone else was prompted for login. Only my login can view the reports. What can I do to let others to open the reports with the same web application? Thanks.
DanYeung
Hey all,
I know this is a very minor gripe, but I cannot find any way to get SQL Server Management Studio to stop prompting me to save queries. I've poked through all the options without success, but it doesn't seem possible that they would have left this out.
Am I out of luck?
Hello,
View 6 Replies View Related
I created a dataset based on a stored procedure. There are nine input parameters. When I click on the preview tab, it is asking me for ten input parameters.
I double checked my dataset on the data tab, and it only shows the expected nine parameters when I look at the parameters tab. I can also run the query without issue from the data tab.
I have no idea why it is asking for an extra parameter on the preview tab. It is a column name that does exist in my database, but is in no way used in the stored procedure in question.
Has anyone else run into a similar situation?
I have connected to Database using my credentials by checking remember password option. After few days I forgot my password. How can I recover the password as SQL remember it. Is there any way to recover my password instead of resetting it.
View 3 Replies View RelatedI have a package protected by a password - I am already unhappy that to get it to use the configuration file to change connection strings for the production servers I have had to hardcode the password into the config file - very insecure!
However, the package now deploys correctly to the production server and will run from there OK, but NOT if scheduled as a SQL Server Agent Job. Thus is because however often I edit the command line to include the password after the DECRYPT switch (which it has prompted me for when I click on the command line tab), the Job Step will not retain it.
If I open it up after I have edited it and closed it, the password has disappeared.
I know that if I run dtexec plus the code in the Command Line tab (with the password), the package runs OK.
This is driving me insane!
I have read all the other posts and so I tried replacing the SSIS package step with a CmdExec step and pasting that code into there - then I get an OLEDB error..
The code I use is:
DTEXEC /SQL "ImportRateMonitoringTables" /SERVER servername /DECRYPT password /CONFIGFILE "D:Microsoft SQL ServerSSISDeploymentsRateMonitoringImportTasksDeploymentImportRateMonitoringTables_Production.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
and I get
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF
although the same code executes perfectly from a command prompt.
Please does anyone have any experience with a similar problem and if so, how did you get round it?
Thank you
I am receiving the following error message when attempting to create a new SQL Authenticated login id.
Password validation failed. The password does not meet the requirements of the password filter DLL. (Microsoft SQL Server, Error: 15119)
I have four servers all running SQL Server 2005 SP2 on Windows 2003 Ent. SP1. Of the four servers, only one received the above error message using the same TSQL below.
CREATE LOGIN TEST_LOGIN WITH PASSWORD = 'pvif9dal' MUST_CHANGE, CHECK_EXPIRATION = ON
All four servers are in the same domain, which if I understand correctly, the password policies are therefore inherited at the OS level by the domain. The password being used is within the password policies of the domain.
Any ideas as to a root cause?
I tried to install an ALLDATA database which run with SQL Server 2005 express edition. The data base fails to install becase of the following code that come up which is related to AS password requirement. The error that come up is:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The sa password must meet SQL Server password policy requirements. For strong password guidelines, see Authentication Mode, in SQL Server Books Online.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=28001&EvtType=sqlca%5csqlcax.cpp%40SAPasswordPolicyCheck%40SAPasswordPolicyCheck%40x6d61
------------------------------
BUTTONS:
&Retry
Cancel
------------------------------
I am trying to install this database in a network server operating under Windows Server 2003 R2 with SP2. If anyone knows how to solve this problem, please let me.
Thanks,
Amilcar
On the login prompt for Report Server, there is a checkbox option to "Remember my Password." I check this, login successfully... but when returning to the Report Server, I am again prompted for the password, although the user name is saved. No matter how many times I do this, the password will not save in IE7. I have tried this on 3 different computers with IE7. In IE 6, I do not even get the checkbox as an option, just the user name/password prompt. In Firefox, the password saves fine. Any ideas what would be causing this?
Thanks,
Brian
I put this together to export the user name /password to a csv file to test my SP to output the user name/password.
DECLARE @user_name varchar(50)
DECLARE @psswrd varchar(10)
SELECT @user_name ,@psswrd
FROM ngweb_bulk_enrollments
EXEC master.dbo.xp_cmdshell 'bcp NGDevl.dbo.ngweb_bulk_enrollments out C: est.csv -Sserver1 -T -t, -r
-c'
This works but I don't get the headers in the file. How can I include the headers?
I have an internal Project Management and Scheduling app that I wrote internally for my company. It was written to use MySQL running on a Debian server, but I am going to move it to SQL Server 2000 and integrate it with our Accounting software. The part I am having trouble with is the user login portion. I previously used this:
PHP Code:
$sql = "SELECT * FROM users WHERE username = "$username" AND user_password = password("$password")";
Apparently the password() function is not available when accessing SQL Server via ODBC. Is there an equivalent function I could use isntead so the passwords arent plaintext in the database? I only have 15 people using the system so a blank pwd reset wouldn't be too much trouble.
I am building a website in Dreamweaver. I have tried and tried to get a connection to SQL 2005. Everything works on the web except the stuff that requires the use of my SQL tables. With OPEN_Conn ="Provider=SQLOLEDB;Data Source=localhost;Initial Catalog=master" I get an error at the bottom of my page saying this:
Microsoft OLE DB Provider for SQL Server error '80004005'
Invalid authorization specification
When I add a password and ID to the string the pages become very slow and I get this error:
Microsoft OLE DB Provider for SQL Server error '80004005'
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
Using windows authentication when logging into SQL Server doesn't have a user id or password so maybe I just don't know what to put there. I have tried a mix of all the passwords and ID's I use on this computer. Do I even have to have the user ID and password and if not how do I fix the first error? All help appreciated.
Hi All.
Have a nice day.
in my project asp.net web.config file has
<connectionStrings> <add name="MyDbConn" connectionString="Data Source=NAVEEDSQLEXPRESS;Initial Catalog=QADB_2005;Persist Security
Info=True;User ID=db1;Password=12345;" providerName="System.Data.SqlClient" /> </connectionStrings>
I want to change password of database, how can i change. please can you assist.
Thanks.
Zahyea.
Hello ,
Is is correct that the 'sa ' passoword is stored in one of the files of the SQL Server and is easily readable if the location of the file is known ?
If not , then is the password encrypted when i try to connect to the SQL server on the Internet ?
Thanks.
Sameer.
I am designing a DTS package which i need to update every so often to change the name of the source file(it's a text import). Every time that i change this, then click save, the DTS job begins to fail, with password errors. I put the password back in correctly( i still don't know why it gets lost in the first place), and click save - same result. this is getting tremendously frustrating, so i really appreciate any answers.
View 3 Replies View RelatedI will like to Change the SA Password, Do i have to go thru all the DTS packages and Jobs to change it too?
Thanks
I need to get a password out of SQLServer 6.5. The account is a user account. I need to get the password so that I can create a development database. The DBA's that know the password have left the company, and I can not just change the password. Please HELP!!!
View 1 Replies View RelatedRecently my husband has taken the position of IS Manager for a major hotel Firm.
The IS Manager that was there before him had a SQL Server which held some of the hotels data.
He did not leave the SA password. How do you find out what the SA password is
if you do not have it? I do not know what to tell him. Does anyone out there
have any idea what he can do?
Thanks in advance for your help.
Dianne
Can someone tell me if there is a password in Entereprise manager.
I've been having trouble with Scheduled tasks.
There are not running anymore.
THANK YOU.
Hi!
When I try to set password for any login begining from 'sa' using Enterpr. Manager or sp_password I get error message:
'Server: Msg 552, Level 16, State 1, Procedure sp_password, Line 63
CryptoAPI function 'CryptAcquireContext' failed. Error 0x80090006: Invalid Signature.'
What does it mean?
Thank you,
Elena.
Is there anyway to "get in the backdoor" if you have installed SQLserver and assigned sa a password (no other users are set up with admin rights) and then forget what the password is.
In the online doc it says you have to reinstall SQL server....isn't there any other way to get in??? For instance in SYBASE you can log on to the console and "go thru the backdoor" and issue a command from there.
Please advise.
I will like to Change the SA Password, Do i have to go thru all the DTS packages and Jobs to change it too?
Thanks
How do i get a password from the master database for a sql user account?
Someone created a password for a sql account and forgot what it was...
All
I can not change the 'sa' password, it's give me the error attached.
What can I do?
Thks
I can not change the 'sa' password. It's showing the error below:
<<Error 21776: [SQL-DMO The name 'dbo' was not found in the Users collection. If the name is a qualified name, use [] to separate various parts of the name, and try again.>>
What can i do?
Thks