Dear All,
I inserted a record in table on DB created on SQLServer 2005 and found out that the one of the column values is shown as '??????' instead of showing the encrypted value that I sent with the insert statement.3
............................ Can anyone tell me how to get rid of this?
Thanks and regards,
Z Z.
I have a DB named zCIFRecord with a column named CIFUpdateDate which is of datatype varchar. The data is a date MM/DD/YYYY 01/30/2008, this is al that is in this column. I can search this colum for individual dates and for a range of dates. My problem is with a range of dates that is not within the same year, such as;
SELECT [CIFPan]
,[CIFMemNum]
,[CIFLName]
,[CIFFName]
FROM [FutureSoft].[dbo].[zCIFRecord]
WHERE [CIFUpdateDate] between '12/01/2007' and '01/30/2008'
will return nothing because it seems to only search on the 12 then the 01 then the 2008. this search can be performed properly on dates within the same year such as;
SELECT [CIFPan]
,[CIFMemNum]
,[CIFLName]
,[CIFFName]
FROM [FutureSoft].[dbo].[zCIFRecord]
WHERE [CIFUpdateDate] between '01/01/2008' and '01/30/2008'
will return the proper values because now all the numbers are in correct order. How can i create a search that lets me perform the first query as well as the second query. I tried to convert to a float but you cant convert a varchar to a float.
Cannot use dynamic sql in current context. So need some help regarding this.I am developing a stored procedure to update a table. Sending Column names as parameters, but not able to use them as given below.INSERT INTO Books (@Column1, @Column2) values.. Any way to execute without using dynamic sql?..Thanx.
View 1 Replies View RelatedHi,
This is my complete trigger.
ALTER TRIGGER DeleteTriggerC_Middleware_Exception ON dbo.C_Middleware_Exception AFTER DELETE AS
BEGIN
DECLARE @RowCount AS VARCHAR
SET @RowCount = @@ROWCOUNT
DECLARE @TableName_Deleted AS VARCHAR(50)
DECLARE @ErrorMsg_Deleted AS VARCHAR(255)
DECLARE @AddlErrMsg_Deleted AS VARCHAR(255)
DECLARE @SubjectArea_Deleted AS VARCHAR(25)
DECLARE @CHKPT_Deleted AS VARCHAR(10)
SELECT @TableName_Deleted = table_name , @ErrorMsg_Deleted = cast(error_msg AS varchar(255)) , @AddlErrMsg_Deleted = cast(addl_error_msg AS varchar(255)),
@SubjectArea_Deleted = cast(SUBJECT_AREA AS varchar(25)), @CHKPT_Deleted = cast(CHKPT AS varchar(255))FROM DELETED
--where subject_area = 'inventory'
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE Table_Name = @TableName_Deleted
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @ErrorMsg_Deleted like Error_Msg and Subject_Area IS NULL and ChkPoint IS NULL
END
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @AddlErrMsg_Deleted like Addl_Error_Msg
END
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @ErrorMsg_Deleted like Error_Msg and Subject_Area = @SubjectArea_Deleted and ChkPoint = @CHKPT_Deleted
END
END
when i am executing the follwing query i am gettin systax error.
Query :delete from dbo.c_middleware_exception where subject_area = 'eap_room'
Error :
Server: Msg 245, Level 16, State 1, Procedure DeleteTriggerC_Middleware_Exception, Line 17
Syntax error converting the varchar value '*' to a column of data type int.
what could be the solution.
Thanks in advance
yvnsmca
I have an inventory database that Im trying to create a report out ofthe IP address are a lookup on a seperat table but I keep getting theabove error can I change the table row to something to fix this orwhat.SELECT i.INVENTORY_ITEM_ID AS [IP Address],i.HOST_NAME AS [ServerName], '' AS Flag, i.MEMO AS Comments, 'Seattle' AS City, 'Washington'AS State,CASE WHEN fv.value = 'EL EET1410' THEN '1111 3rdAve.' WHEN fv.value = 'EL WFL17' THEN '999 3rd Ave.' ELSE '' END AS[Address 1],' ' AS [Address 2], CASE WHEN fv.value = 'ELEET1410' THEN '1111' WHEN fv.value = 'EL WFL17' THEN '2222' ELSE ''END AS [Building ID],fv.VALUE AS Building, '98101' AS Zip,CASE WHEN fv.value = 'EL EET1410' THEN '14' WHENfv.value = 'EL WFL17' THEN '17' ELSE '' END AS [Computing FacilityLevel],CASE WHEN fv.value = 'EL EET1410' THEN '14' WHENfv.value = 'EL WFL17' THEN '17' ELSE '' END AS [Bldg Floor],CASE WHEN fv.value = 'EL EET1410' THEN 'C028'WHEN fv.value = 'EL WFL17' THEN 'C123' ELSE '' END AS WSPID,i.LOCATION_IN_FACILITY AS Location,i.SERIAL_NUMBER AS [Serial Number], i.ASSET_TAG AS [Asset Tag], ' ' AS[Second Asset Tag(s)],vv.VALUE AS Manufacture, mv.VALUE AS Model,'Yes' AS [Rack Mountable], rv.VALUE AS [Rack Units], 'DEV' AS [ServerEnviroment],lv.VALUE AS [Sever Type], ov.VALUE AS OS,CASE WHEN lv.value = 'Server - Intel Blade' THEN'Windows' WHEN lv.value = 'Server - Intel' THEN 'Windows' WHENlv.value = 'Server - Unix' THEN 'Unix'ELSE '' END AS [OS Type], '19x28' AS Footprint,ev.VALUE AS [Technical Owner of Server], 'N/A' AS [SLA Category],i.ON_BOARD_NIC_PORT_COUNT AS [NW Connectionquantity], 'Devlopment/Test Machine' AS [Application(s) Name],ev.VALUE AS [PW Contact],'N/A' AS RTO, 'N/A' AS RPO, 'No' AS [Is BoxClustered?], 'N/A' AS [Buisness Critical],CASE WHEN mv.value = 'Proliant DL580G1' THEN'90lbs' WHEN mv.value = 'Proliant DL360G2' THEN '85lbs' WHEN mv.value= 'Enterprise 220R' THEN'45lbs' ELSE '' END AS Weight,i.LAST_MODIFIED_DATE AS [Date of Last Install], 'No' AS [DedicatedCircuit]FROM dbo.INVENTORY_ITEM i LEFT OUTER JOINdbo.IP_TO_INVENTORY pv ON pv.IP_ADDRESS = i.INVENTORY_ITEM_IDLEFT OUTER JOINdbo.LOOKUP_VALUE lv ON lv.LOOKUP_VALUE_ID =i.DEVICE_TYPE_ID LEFT OUTER JOINdbo.LOOKUP_VALUE fv ON fv.LOOKUP_VALUE_ID =i.FACILITY_ID LEFT OUTER JOINdbo.LOOKUP_VALUE vv ON vv.LOOKUP_VALUE_ID =i.VENDOR_ID LEFT OUTER JOINdbo.LOOKUP_VALUE mv ON mv.LOOKUP_VALUE_ID =i.MODEL_ID LEFT OUTER JOINdbo.LOOKUP_VALUE ov ON ov.LOOKUP_VALUE_ID =i.SOFTWARE_VERSION_ID LEFT OUTER JOINdbo.LOOKUP_VALUE ev ON ev.LOOKUP_VALUE_ID =i.CHECKED_OUT_BY_ID LEFT OUTER JOINdbo.LOOKUP_VALUE rv ON rv.LOOKUP_VALUE_ID =i.U_HEIGHT_ID
View 2 Replies View RelatedI am unable to get FTS working where the column to be searched is type varchar(MAX) or Text. I can get this to work if my column to be indexed is some statically assigned array size such as varchar(1000).
For instance this works, and will return all applicable results.
CREATE TABLE [dbo].[TestHtml](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PageText] [varchar](1000) NOT NULL,
CONSTRAINT [PK_TestHtml] PRIMARY KEY CLUSTERED
SELECT * FROM TestHTML WHERE Contains(PageText, @searchterm);
And this does not. It returns zero results what so ever.
CREATE TABLE [dbo].[TestHtml](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PageText] [varchar](MAX) NOT NULL,
CONSTRAINT [PK_TestHtml] PRIMARY KEY CLUSTERED
SELECT * FROM TestHTML WHERE Contains(PageText, @searchterm);
Could someone please tell me what I need to do to enable FTS on varchar(MAX) or Text columns?
SQL server 2000
Note : GRP_ID integer
declare @SchDnGRP VARCHAR(50)
SET @SchDnGRP='29,30'
SELECT USR_ID_ARY from AD_USR_GRP Where GRP_ID in(@SchDnGRP)
i got error like
Syntax error converting the varchar value '29,30' to a column of data type int.
if need any sql server Configuration requie, please advice to me
I have a table(tab1) with a column(col1) of type varchar. I insert a row with an integer value(1). And when i query the table using the sql, select col1 from tab1 where col1 = 1, it works fine.
But after i insert a varchar, say 'a' and then do the same query, i get an error message saying, "Syntax error converting the varchar value 'a' to a column of data type int.". Why is this so? Please reply.
Well I am doing a simple insert through a stored procedure..., but I am getting this error. In my table I have the UserID as a VARCHAR 100. I am storing from a textbox that will have number because its there email. But I am not converting anything. Do I need to convert in this scenario??
Server Error in '/pickem' Application.
Syntax error converting the varchar value 'johndoe@hotmail.com' to a column of data type int. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'johndoe@hotmail.com' to a column of data type int.Source Error:
Line 113:
Line 114: dbConnection.Open
Line 115: Dim Dr As System.Data.IDataReader = myCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
Line 116:
Line 117: Dim rowsAffected As Integer = 0
Here is the code: Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(ConfigurationSettings.AppSettings("connString"))
Dim myCommand as New SqlCommand("prcAddTeam", dbConnection) myCommand.CommandType = CommandType.StoredProcedure
myCommand.Parameters.Add("@UserID", SqlDbType.Varchar, 100).Value = TRIM(emailBox.Text) myCommand.Parameters.Add("@TeamName", SqlDbType.Varchar, 40).Value = TRIM(teamBox.Text) myCommand.Parameters.Add("@Address1", SqlDbType.Varchar, 50).Value = TRIM(addressBox.Text) myCommand.Parameters.Add("@Address2", SqlDbType.Varchar, 50).Value = TRIM(address2Box.Text) myCommand.Parameters.Add("@City", SqlDbType.Varchar, 50).Value = TRIM(cityBox.Text) myCommand.Parameters.Add("@State", SqlDbType.Varchar, 30).Value = stateList1.SelectedItem.Value myCommand.Parameters.Add("@Zip", SqlDbType.Varchar, 11).Value = TRIM(zipBox.Text) myCommand.Parameters.Add("@FirstName", SqlDbType.Varchar, 50).Value = TRIM(firstNameBox.Text) myCommand.Parameters.Add("@LastName", SqlDbType.Varchar, 50).Value = TRIM(lastnameBox.Text)
dbConnection.Open Dim Dr As System.Data.IDataReader = myCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
Dim rowsAffected As Integer = 0
dbConnection.OpenStored procedure:CREATE PROCEDURE prcAddTeam @UserID VARCHAR(100) ,@TeamName VARCHAR(40) ,@Address1 VARCHAR(50) ,@Address2 VARCHAR(50) ,@City VARCHAR(50) ,@State VARCHAR(30) ,@Zip VARCHAR(11) ,@FirstName VARCHAR(50) ,@LastName VARCHAR(50) ASSET NOCOUNT ONDECLARE @ID INTSET @ID = 0SELECT @ID = ISNULL((SELECT UserID from tblUserInfo where UserID = @UserID),0)IF @ID = 0 BEGIN INSERT INTO tblUserInfo (UserID,TeamName,Address1,Address2,City,State,Zip,FirstName,LastName,CreateDate) VALUES(@UserID,@TeamName,@Address1,@Address2,@City,@State,@Zip,@FirstName,@LastName,GetDate()) SET @ID = @@IDENTITY END
this data. need help
Sort following numbers by asc and desc order
Before query sort
-1.1
-8.8
-15.5
0.0
+0.5
+0.2
Sort asc
+0.5
+0.2
0.0
-1.1
-8.8
Sort Desc
-8.8
-1.1
0.0
+0.2
+0.5
I'm moving data from one database to another (INSERT INTO ... SELECT ... FROM ....) and am encountering this error:
Msg 8114, Level 16, State 5, Line 6
Error converting data type varchar to numeric.
My problem is that Line 6 is:
set @brn_pk = '0D4BDE66347C440F'
so that is obviously not the problem and my query has almost 200 columns. I can go through one by one and compare what column is int in my destination table and what is varchar in my source tables, but that could take quite a while. How I can work out what column is causing the problem?
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies View RelatedTo do this successfully do I need to backup the Service master, Database master, and database itself from the the Source server, then restore all three of them on the destination server?
(I'm concerned that restoring the source Service Master key to a new target server with an existing sql 2005 install will screw things up big time.)
TIA,
Barkingdog
I have looked far and wide and have not found anything that works to allow me to resolve this issue.
I am moving data from DB2 using the MS OLEDB Provider for DB2. The OLEDB source sees the column of data as DT_TEXT. I setup a destination to SQL Server 2005 and everything looks good until I try and run the package.
I get the error:
[OLE DB Source [277]] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
[OLE DB Source [277]] Error: Failed to retrieve long data for column "LIST_DATA_RCVD".
[OLE DB Source [277]] Error: There was an error with output column "LIST_DATA_RCVD" (324) on output "OLE DB Source Output" (287). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [277]] Error: The "output column "LIST_DATA_RCVD" (324)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "LIST_DATA_RCVD" (324)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The PrimeOutput method on component "OLE DB Source" (277) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Any suggestions on how I can get the large string data in the varchar column in DB2 into the varchar(max) column in SQL Server 2005?
Hi all,
I am trying to join 2 tables in my database on an encrypted column. I am using a symmetric encryption, but because of the IV, a string encrypted at 2 different times produces 2 different encrypted strings. Therefore, I can not merely join the 2 tables on the encrypted columns. Has anyone any insight on techniques for solving this problem? The most naïve way, would be to decrypt both tables, join them, and re-encrypt them again. But, the tables are quite large, and this would be very processor (and time) intensive.
Any help would be greatly appreciated. Thanks in advance for any suggestions.
Is it possible to do a wildcard search on an encrypted column?
Many thanks!
I have a table having 1 column whose value have to update,the column is encrypted using symmetric encryption. Value in column is 0 in char form, I have to increment it, when retrieving it return 0 to increment i have to convert it to int,it becomes 48 after increment it is 49 after conversion to char it becomes 1. It is going right upto 9 after 10 it jumps to very large number on increment.
View 5 Replies View RelatedHi,
I have database with encrypted column data in my customer server. Sometime, I might need to backup their database back to office for troubleshooting.
How could I backup/restore master key, symmetric and asymmetric key created for my database?
Thank you
hi,
I want to order my varchar from alphanumeric to numeric
ex : ABCD....Z0123456789..
rather than
0123456789...ABCD..Z
for one session.
How can i do this.
There is a database parameter to do that ?
Hi...
I want to retrieve SQL 2000 Encrypted Column Data From SQL 2005 strored proc. My Stored Procedure was on SQL 2000 and it works fine....Then I restore Database From SQL 2000 to SQL 2005. The Following Statement is on my store proce.
select user_id , Encrypt(user_pass) from OpenRowset('SQLOLEDB','myserver';'sa';'mypass',databasename.dbo.users) as a
The Following Error I get When I execute the above statement.
Msg 195, Level 15, State 10, Line 1
'Encrypt' is not a recognized built-in function name.
Thank you.
Bal.
Hi guys
I need immediate help with a query that I am trying to write. I want to sum the values in a query but the field has a type of varchar and it has decimal numbers too. So if I do the query something like that, that converts the field to int, I get the error message.
I tried converting it into real or float but I get error message on that too. I need help with adding the calculatedValues and getting there sum. I would appreciate any help with that.
Thanks
-Sarah
Select SUM(Convert(int, calculatedValue))
from monitor.dbo.monHistory
where LocalTimeWithoutDst > '8/26/06' and LocalTimeWithoutDst < '8/28/06'
This is the error message I recieve:
Conversion failed when converting the varchar value '274.2' to data type int.
Can i still get the sum of a field even if the data type is of type varchar?
thanks!
Funnyfrog
I want to enforce a unique constraint on a column which must be encrypted in MSSQL 2005 using Cell Level Encyption (CLE).
CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'itsaSECRET!!!3£3£3£!!!'
CREATE CERTIFICATE ERCERT WITH SUBJECT = 'A cert for use by procs'
CREATE SYMMETRIC KEY ERKEY
WITH ALGORITHM = AES_256
ENCRYPTION BY CERTIFICATE ERCERT
[Code] ....
The output makes it obvious why the constraint has 'not' been enforced.
Email
-------
1 | 0x00703529AF46D24BA863A3534260374E01000000328909B51BA44A49510F24DF31
C46F2E30977626D96617E2BD13D9115EB578852EEBAE326B8F3E2D422230478A29767C
2 | 0x00703529AF46D24BA863A3534260374E01000000773E06E1B53F2C57F97C54370FECBB45B
C8A154FEA5CEEB9B6BB1133305282328AAFAD65B9BDC595F0006474190F6482
3 | 0x00703529AF46D24BA863A3534260374E01000000C9EDB1C83B52E60598038D832D34
D75867AB0ABB23F9044B7EBC76832F22C432A867078D10974DC3717D6086D3031BDB
But, how do I work around this?
I encounter this particular error.
Exception Details: System.Data.SqlClient.SqlException: The data types varchar and text are incompatible in the equal to operator.
Line 21: Dim reader As SqlDataReader = command.ExecuteReader()
This is the first time I'm trying out with MS SQL so I'm abit lost. I hope my code is correct and I've did a little search. I did not set "Text" in my database, I use int and varchar. Here's the affected part of my code and the database. Dim password As String = ""
Dim querystring As String = "SELECT Password FROM Member WHERE Username = @username"
'Dim conn as SqlConnection
Using conn As New SqlConnection(ConfigurationManager.ConnectionStrings("mainconnect").ConnectionString)
Dim command As New SqlCommand(querystring, conn)
command.Parameters.Add("@username", SqlDbType.Text)
command.Parameters("@username").Value = txtLogin.Text
conn.Open()
Dim reader As SqlDataReader = command.ExecuteReader()
While reader.Read()
password = reader("Password").ToString()
End While
reader.Close()
End Using
My database:
User_ID int(4)
Username varchar(50)
Password varchar(255)
Email varchar(50)
Any ideas?
I have a varchar field which holds IDs like (1, 3, 5, 19, 23) when I order it, i get it ordered in ASCII order like (1, 19, 23, 3, 5) rather than (1, 3, 5, 19, 23) Even if I convert it to int, I won't be able to order it.
is there any way I can order a varchar field numerically?
Angel
I write using the SQL ODBC driver from software into a SLQ table called UPSSHIPMENT the format is as followed:
JobNumber varchar 50
Weight real 4
FreightCost varchar 8
TrackingNumber varchar 50
Shipmethod varchar 50
VOIDID varchar 3
I then have a trigger set to update the PACKAGE table as followed
CREATE TRIGGER [UPS] ON dbo.UPSSHIPMENT
FOR INSERT
AS
BEGIN
UPDATE PACKAGE
SET WEIGHT = inserted.WEIGHT,
FREIGHTCOST = inserted.FREIGHTCOST,
TRACKINGNUMBER = inserted.TRACKINGNUMBER,
COMMENTS = inserted.SHIPMETHOD
FROM PACKAGE
INNER JOIN inserted on PACKAGE.JOBNUMBER = inserted.JOBNUMBER
WHERE inserted.VOIDID = 'N'
UPDATE PACKAGE
SET WEIGHT = '',
FREIGHTCOST = '0.00',
TRACKINGNUMBER = '',
COMMENTS = 'UPS VOID'
FROM PACKAGE
INNER JOIN inserted on PACKAGE.JOBNUMBER = inserted.JOBNUMBER
WHERE inserted.VOIDID = 'Y'
END
The format of the PACKAGE table is as followed
Jobnumber varchar 50
FreightCost money 8
TrackingNumber varchar 50
Comments varchar 2000
Weight real 4
I am getting the following error
---------------------------
Microsoft SQL-DMO (ODBC SQLState: 42000)
---------------------------
Error 260: Disallowed implicit conversion from data type varchar to data type money, table 'TESTing.dbo.Package', column 'FreightCost'. Use the CONVERT function to run this query.
---------------------------
OK
---------------------------
How do you use the convert function to change the data before the update? Thank You!
:mad:
I am parsing a documnet and i am grabbing that document into a variable of datatype varchar. The document contains more than 8k(upto 30k characters) characters. So how can I handle this situation.How can I get that document into my local varchar variable.
thanks.
SQL command ....
declare @found int;
set @found = 'select sid from StickyContent where StickyId='+0+' and UserId='+171
exec (@found)
delete from StickyContent where sid = @found
I need to pass this statement from my UI i.e in a single query. I am getting this error.
"Conversion failed when converting the varchar value 'select sid from StickyContent where StickyId=' to data type int.
"
A table contains image type data. Actually it is text file. I don't know how to convert it to text and display. The image data size is about 20kb.
View 8 Replies View RelatedI have this procedure and it can't convert this date to datetime type:
Exec scnr.prc_tblScannersReemplazarClasificacion
'CERVEZA ',
'CERVEZA',
'ENV VAC ',
'ENVASE VACIO',
'NULL',
'NO aplica',
'NULL',
'NO aplica',
'1-8-2007',
'10-12-2007',
'ISCRacajina';
and after that i tried to execute it, but I changed the date like next:
Exec scnr.prc_tblScannersReemplazarClasificacion
'CERVEZA ',
'CERVEZA',
'ENV VAC ',
'ENVASE VACIO',
'NULL',
'NO aplica',
'NULL',
'NO aplica',
'8-1-2007',
'12-10-2007',
'ISCRacajina';
and the procedure reseive this parameter:
CREATE PROCEDURE scnr.prc_tblScannersReemplazarClasificacion(@tipoclasificacion varchar(200),
@categoriaV varchar(200),
@categoriaN varchar(200),
@subcategoriaV varchar(200),
@subcategoriaN varchar(200),
@tipoV varchar(200),
@tipoN varchar(200),
@subtipoV varchar(200),
@subtipoN varchar(200),
@fechascanner datetime,
@fechaingreso datetime,
@usuarioscanner varchar(200) )
The error is:
Msg 8114, Level 16, State 5, Procedure prc_tblScannersReemplazarClasificacion, Line 0
Error converting data type varchar to datetime.
Why can't this procedure reseive these dates?
What can I do?
Help me...
Hi.
Current development setup: Visual Studio 2005 (C# language), SQL Server 2005 Express Edition.
I am at this point changing some of my application. It stores a lot of information for times of trains. I decode a file which is text based and my times are stored in varchar(4) columns with the format "HHmm".
I am now at a stage where I need to add values to these times and perform a search based on two time values (a minimum time and maximum time).
I really need to be able to add another varchar(4) value to the times stored in my database (also varchar(4) - may look at this again in future). I have absolutely no interest in storing seconds, modifying the database to include the time colon, nor am I interested in the date portion of a time string, only the 4 digits representing the hours and minutes.
Can this be done easily in SQL server? For example:
varchar(4) of 0445 + varchar(4) of 0027 should result in the time 0512.
Similarly a varchar(4) of 2358 + varchar(4) of 0015 should result in the time 0013.
This has to be very quick to execute.
Thanks for any help you can offer!
Sean
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
can anyone see as to why I would get this error with the following SP?
ALTER PROCEDURE [dbo].[SP]
@ID int = 0,
@emailFrom VARCHAR(50) = Null,
@emailDate VARCHAR(50) = Null,
@emailSubj VARCHAR(50) = Null,
@emailTxtBody VARCHAR(1000) = Null,
@emailHtmlBody VARCHAR(1000) = Null
AS
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @Notes VARCHAR (8000)
DECLARE @TicketID INT
DECLARE @emailBody VARCHAR (1000)
DECLARE @Length Int
SET @Notes = ''
SET @Length = LEN(@emailSubj)
-- insert a new entry
INSERT INTO PopEmail
( emailFrom, emailDate, emailSubj, emailTxtBody, emailHtmlBody )
VALUES
( @emailFrom, @emailDate, @emailSubj, @emailTxtBody, @emailHtmlBody )
-- get the new ID
SET @ID = @@identity
If ( @ID <> 0 ) AND ( ISNUMERIC(@emailSubj) = 1 )
Begin
IF @emailTxtBody IS NULL
BEGIN
Set @emailBody = @emailHtmlBody
PRINT '@emailHtmlBody: ' + @emailBody
END
ELSE
BEGIN
SET @emailBody = @emailTxtBody
PRINT '@emailTxtBody: ' + @emailBody
END
SET @TicketID = CAST( @emailSubj AS int )
SET @Notes = @emailFrom + ', ' + @emailDate + ', ' + @emailBody
Select @ID = ID From TicketDetails Where TicketDetails.TicketID = @TicketID
Exec differentSP @ID, @TicketID, @Notes
PRINT 'Subject: [' + @emailSubj + ']'
print 'length: ' + CAST(@Length as varchar (10))
Print 'emailSubj: ' + CAST( @emailSubj AS int )
PRINT 'ID: ' + Cast( @ID as varchar ( 10 ) )
PRINT 'TicketID: ' + Cast( @TicketID AS Varchar ( 10 ) )
PRINT 'Notes: ' + @Notes
PRINT 'ID: ' + Cast( @ID as varchar ( 10 ) )
END
ELSE
BEGIN
Print 'ID: ' + CAST(@ID AS VarChar(10))
PRINT 'ISNUMERIC: ' + CAST(ISNUMERIC(@emailSubj) AS VarChar (10))
PRINT 'Subject: [' + @emailSubj + ']'
END