Encryption Varbinary Length
Nov 9, 2006
Using the new encryption included in SQL Server 2005, what is a good way to determine what length I should use for the column?
For example, I am encrypting a column, its maxlength is about 30 characters, but when encrypted, the encrypted value extends from between 50 and no more than 68 characters-
So if I had a column with a max of 500 or so characters, how could I know what varbinary length I should set it to if I were to encrypt it, without actually finding the highest value I could possibly fit into the field?
Is it good practice to just make it a varbinary(max) field?
-rob
View 10 Replies
ADVERTISEMENT
Feb 23, 2008
Hi,
I want to restrict varbinary column for not to store more that 2mb image file in the database. How can i do that.
Thanks in Advance!
View 2 Replies
View Related
May 26, 2000
hai guys,
i want to find out the length of the varbinary field ex: 0x000003752B226B3D0579
thanks
hari
View 1 Replies
View Related
Jun 24, 2008
Hi,
I'm trying simple code:
declare @varbinary varbinary(8000)
set @varbinary = 2592
print len( @varbinary )
number length
2590 4 bytes
2591 4 bytes
2592 3 bytes ????
2593 4 bytes
All number in range 1 - 9000 has length 4 bytes except these numbers:
32,288,544,800,1056,1312,1568,1824,2080,2336,2592,2848,3104,3360,3616,3872,4128,4384,4640,4896,5152,5408,5664,5920,6176,6432,6688,6944,7200,7456,7712,7968,8480,8736,8992
These numbers has length 3 bytes !
Why?
I´m using varbinary variable to transport ID values and parsing in loop
set @cnt = len( @binEmpIDList ) / 4 -- 4 length
....
insert into @List( ID ) values( substring( @varbinary, @i * 4 + 1, 4 ) )
...
but this algorithm malfunctioning in enumerated numbers.
Please help, how correct this.
ID values in @varbinary too much. I cannot using convert varbinary to bigint and convert bigint to string.
Dalibor
View 7 Replies
View Related
Feb 2, 2015
I'm having an issue in encrypting large documents. I know that previous editions ENCRYPTBYKEY had a maximum size of 8,000 byte limitation. Does SQL Server 2014 have any new features that overcomes this limitation?
Using
SQL Server 2014 Std
Symmetric key with AES_256
View 2 Replies
View Related
Jun 30, 2014
is there any way or a tool to identify if in procedure the Parameter length was declarated less than table Column length ..
I have a table
CREATE TABLE TEST001 (KeyName Varchar(100) ) a procedure
CREATE PROCEDURE SpFindNames ( @KeyName VARCHAR(40) )
AS
BEGIN
SELECT KeyName FROM TEST001
WHERE KeyName = @KeyName
END
KeyName = @KeyName
Here table Column with 100 char length "KeyName" was compared with SP parameter "@KeyName" with length 40 char ..
IS there any way to find out all such usage on the ALL Procedures in the Database ?
View 2 Replies
View Related
Mar 27, 2008
For those of you who would like to reference my exact issue, I'm dealing with the RSExecution SSIS package at the "Update Parameters" data flow task, at the Script Component.
The script tries to split parameter data into name and value. Unfortunately, I have several reports that are passing parameters that are very large. One example has over 65,000 characters all in the normal "¶mname=value&parm2=value..." format.
The code in the script works fine until it gets to one of these very large parameter sets. I have figured out what is causing the issue. Here's some code:
Dim paramBlob as Byte()
paramBlob = Row.BlobColumn.GetBlobData(0, Row.BlobColumn.Length)
The second parameter of the .GetBlobData function takes an INTEGER as its count! Therefore, no matter what kind of datatype I pass to the string that the script will later split, it will be limited to 32767 characters.
THIS IS A PROBLEM!!!
Does anyone know a workaround for this issue? I need all of the parameter data to be reported, and I would hate to have to skip over rows like this. Also, if I'm missing something, please fill me in!
Thanks for your help in advance,
LOSTlover
View 6 Replies
View Related
Oct 7, 2015
I have created two user defined functions for encryption and decryption using passphrase mechanism. When I call encryption function, each time I am getting the different values for the same input. While I searching a particular value, it takes long time to retrieve due to calling decryption function for each row.
best way to encrypt and decrypt using user defined functions.Below is the query which is taking long time.
SELECT ID FROM table WITH (NOLOCK)
                    WHERE dbo.DecodeFunction(column) = 'value'
When I try to use symetric or asymetric encryption, I am not able to put "OPEN SYMETRIC KEY" code in a function. So, I am using PassPhrase mechanism.
View 3 Replies
View Related
Feb 24, 2008
I am trying to narrow down this problem. Basically, I added 3 columns to my article table. It holds the article id, article text, author and so on. I tested my program before adding the additional field to the program. The program works fine and I can add an article, and edit the same article even though it skips over the 3 new fields in the database. It just puts nulls into those columns.So, now I have added one of the column names I added in the database to the code. I changed my businesslogic article.vb code and the addarticle.aspx, as well as the New article area in the addartivle.aspx.vb page. The form now has an additional textbox field for the ShortDesc which is a short description of the article. This is the problem now: The command parameters.length is 9 and there are 10 parameter values. Right in the middle of the 10 values is the #4 value which I inserted into the code. It says Nothing when I hover my mouse over the code after my program throws the exception in 17 below. Why is command parameters.length set to 9 instead of 10? Why isn't it reading the information for value 4 like all the other values and placing it's value there and calculating 10 instead of 9? Where are these set in the program? Sounds to me like they are hard coded in someplace and I need to change them to match everything else. 1 ' This method assigns an array of values to an array of SqlParameters.2 ' Parameters:3 ' -commandParameters - array of SqlParameters to be assigned values4 ' -array of objects holding the values to be assigned5 Private Overloads Shared Sub AssignParameterValues(ByVal commandParameters() As SqlParameter, ByVal parameterValues() As Object)6 7 Dim i As Integer8 Dim j As Integer9 10 If (commandParameters Is Nothing) AndAlso (parameterValues Is Nothing) Then11 ' Do nothing if we get no data12 Return13 End If14 15 ' We must have the same number of values as we pave parameters to put them in16 If commandParameters.Length <> parameterValues.Length Then17 Throw New ArgumentException("Parameter count does not match Parameter Value count.") 18 End If19 20 ' Value array21 j = commandParameters.Length - 122 For i = 0 To j23 ' If the current array value derives from IDbDataParameter, then assign its Value property24 If TypeOf parameterValues(i) Is IDbDataParameter Then25 Dim paramInstance As IDbDataParameter = CType(parameterValues(i), IDbDataParameter)26 If (paramInstance.Value Is Nothing) Then27 commandParameters(i).Value = DBNull.Value28 Else29 commandParameters(i).Value = paramInstance.Value30 End If31 ElseIf (parameterValues(i) Is Nothing) Then32 commandParameters(i).Value = DBNull.Value33 Else34 commandParameters(i).Value = parameterValues(i)35 End If36 Next37 End Sub ' AssignParameterValues38 39 40 41
View 2 Replies
View Related
Jun 30, 2006
Does anybody can expain me what is the reason for varbinary accept the value 0 for length? We can insert files with >0 length in it?????
View 1 Replies
View Related
Jan 22, 2007
Hi,
We have a large database table with an IMAGE field holding documents of < 1MB size.
Over time this table has become quite large and operations on it have become slow.
My question is, would changing from IMAGE to varbinary(max) make the binary storage more efficient thereby making the table operations faster.
Also, would the table size be smaller with varbinary(max)?
Thanks
View 1 Replies
View Related
Sep 16, 2004
Can anyone tell me what varbinary casts to ?? can I do this int[] temp=(int)DataReader["varbinaryColumn"]. Or is byte[] temp the appropiate protocol.
View 1 Replies
View Related
Dec 12, 2006
hello.
i want to do something with this database but i don't know how:
there is this column that is varbinary and i want to replace just one part of its content, for example:
this is its content:
'CC08FF806785'
and i just want to change the FF for AA.
i tried using query analyzer with this:
update table
set column=replace(column,'FF','AA')
but it says something like conversion isn't allowed from data varchar to varbinary and that i should use the function "convert" but i don't know how to use that!
does anyone know how to do that?
thanks!
View 15 Replies
View Related
Feb 28, 2007
I want to store JPG files in my table... So far I know varbinary datatype can be used to store large object types like images,documents etc.How do I add records for this data type in table
Thanks
View 1 Replies
View Related
Apr 1, 2008
HiI moved to SQL Server 2005 (from 2000) and noticed there is a bettervariable to deal with binary arrays.I hava a table that hold 9 columns of images (BLOB). each array has adifferent size and can be larger than 4k.I've changed the column data type from image to varbinary(max).After the chnage, the size of the table grew from 22MB to 26MB.Any idea why? I though the new variable should be better.I have another table where there are 3 columns with binaries, the sizeof the arrays there is much smaller and vary from 32bytes to 150byteslong. when I changed the data type to varbinary the size of the tableshrunk by half!!now I'm completely confused...Gilad.
View 1 Replies
View Related
Apr 30, 2008
I have table in SQL2005 with 4 encrypted columns, and reading data is OK, but problem is inserting data...
I tryed using bulk insert but no results...
this is the row that I should insert
1 5 FT 2005-09-10 00:00:00 0x4200690072006D0069006E006700680061006D0020004300690074007900 0x43006800610072006C0074006F006E0020004100740068006C006500740069006300 0x30002D0031002000200020002000200020002000 0x30002D0031002000200020002000200020002000 0x45004E004700200050005200 0x32003000300035002F003200300030003600
its tab delimited...and 0x4200690072006D0069006E006700680061006D0020004300690074007900 is value for one field..hoe to send that value to stored proc?
when I try using code I get all defferent errors...examples on net are one where you convert picture into blob, like this
Dim fs As New FileStream ("c:some.bmp", FileMode.OpenOrCreate, FileAccess.Read)
Dim iLen As Integer = CInt(fs.Length)
Dim bBLOBStorage(iLen) As Byte
fs.Read(bBLOBStorage, 0, iLen)
fs.Close()bBLOBStorage is parameter for stored proc...but I have different situation...my blobs are all in one file
View 3 Replies
View Related
Aug 10, 2007
Hello,
Would you please be kind to answer my question !
I have developed an ASP.NET Web application using SQL Server Express 2005 in my local PC where I have used VarBinary(MAX) for an image data storage. It is working fine in my computer. Now, I have configured my SQL Server 2005 in my production server using MyLittleAdmin, I found that, I can not set the value MAX for VarBinary, so I am forced to enter the value of varBinary = 8000. Now, When I insert image to this field more than 8KB, I get the following message,
"String or binary data would be truncated."
So, what does it mean, Is it not really possible to store image or file data in VarBinary which is more than 8KB ? if yes, then how can I configure my table for that using MyLittleAdmin ?
Regards
View 4 Replies
View Related
Jul 17, 2007
I have been instructed to setup a database that will allow the storing of files in binary format. I have looked at using the varbinary(max) data type on a column to store the information. I am not sure based on books online how much information this can store. I have files that could be as large as 5-10 GB in size. Will SQL 2005 support storing these in binary format with that data type?
View 1 Replies
View Related
Apr 2, 2008
If I have a Varbinary(MAX) column and I want to update all of it what will give me the best performance.
Calling
Update Table
Set Data = @data
or calling this multiple times
Update Table
Set Data .Write(@data, @offset, @length)
Alan
View 2 Replies
View Related
Jun 23, 2005
I have a password field which is of varbinary. Since its a varbinary I
cannot see the password in the database I only see hexadecimal values.
Now my question is that how can I convert those hexadecimal values to
string or varchar so I can read the password.
any ideas ??
View 1 Replies
View Related
May 31, 2002
I am trying to convert Varbinary to Char it keeps returning this ...
--------------------------------------------------
´å
(1 row(s) affected)
Here is the code that I am using....
declare @name varbinary(50)
set @name =0x12b4e5
SELECT Convert(char(50),@name)
Can someone please help! ~Dana
View 3 Replies
View Related
Dec 31, 2013
I need to run a replace on a varbinary field but I am unsure how. I have tried mulitple different methods and to no avail. I am stumped.
I have attached a zip folder that contains a spreadsheet that shows what I am trying to do. In the first tab it shows the SQL command I use to call the field I want to change. In this case it's the Content field and I am calling it using the content_key. As you can tell the content is stored as varbinary. In the second sheet, It shows this varbinary being converted to varchar(max) and it shows what the actual text says.
The table that this information is stored is is called digitalassetcontent
I need to remove the
Code:
<STYLE>H1{font-weight:bold}H1{font-size: 14pt}OL</STYLE><H1>Product Description</H1>
That is in front of the actual product description.
Somehow I need to run this command:
Code:
Update digitalassetcontent
set content = replace(CAST(content as varchar(max)), '<STYLE>H1{font-weight:bold}H1{font-size: 14pt}OL</STYLE><H1>Product Description</H1>','')
Where CAST(content as varchar(max)) like '<STYLE>H1{font-weight:bold}H1{font-size: 14pt}OL</STYLE><H1>Product Description</H1>%' AND content_key = 'desc214974236480438500781058983745755010'
This is the error message I get when running this code: Implicit conversion from data type varchar(max) to varbinary(max) is not allowed. Use the CONVERT function to run this query.
On the varbinary field. How do I do this?
View 4 Replies
View Related
Feb 17, 2004
Is there something else begger than that ?? as to be in binary !! for my image..
thanx.. because 8000 is not big enought..
View 3 Replies
View Related
Jun 6, 2008
Hello,
I am trying to create a statement that will update many rows in a table with images, stored as varbinary(max), into a new column.
The path/file information is all stored in another table, but I can't find a way to update more than 1 at a time. Here is the statement that works for 1 row at a time:
update tblphotos set photo = (select
BulkColumn from
Openrowset( Bulk '\**servername**PropsImagesDon Giovanni 2002PropsHorses Guts 2.jpg', Single_Blob) as photo
)
where photoseq = 27
but if I try to do something like this:
CREATE TABLE #temp (
photoSeq int,
photoLoc varchar(255),
photo varbinary(max)
)
INSERT #temp
select p.photoseq, f.fldlocation + p.photophyloc as files,
(select
BulkColumn from
Openrowset( Bulk f.fldlocation + p.photophyloc, Single_Blob) as photo
)
FROM txprops t
join tblfolders f on t.fldlocation = f.fldseq
join tblphotos p on p.photopropseq = t.propseq
begin tran
update a set photo = b.photo
from tblphotos a
join #temp b on a.photoseq = b.photoseq
where a.photoseq = b.photoseq
select * from tblphotos order by photophyloc
commit tran
drop table #temp
I get an error: Incorrect syntax near 'f'.
I think this is because I can only put a path in beside BULK.
I have investigated BULK and bcp commands, but cannot find anything to satisfy this. I tried the DTS package route, but am not getting very far.
Any suggestions? Is DTS the solution for me?
View 2 Replies
View Related
May 30, 2014
I'm an asp.net developer and I inherited an application that stores all the documents (video,pdf,txt) in a varbinary(max) field. how to do this without stressing the server? There are about 100000 files stored in the DB.
View 1 Replies
View Related
Jul 20, 2005
What is the documented and known behavior of inserting hex constants into abinary/varbinary column from a client to a server which have different codepages? Will any code page / character set conversion take place?eg: insert into t1 values ('AA') or insert into t1 values(x'AA')ThanksAakash
View 1 Replies
View Related
Nov 6, 2006
It would be nice if SQL Server Everywhere could support NVARCHAR(MAX) and VARBINARY(MAX), even if they would just be alias' for NTEXT and IMAGE. This would somewhat simplify the interoperability with SQL Server 2005 (i.e. no need to have different scripts for each database type).
Gerrit
View 3 Replies
View Related
Apr 3, 2007
Hi everyone,
We're trying to migrate a varchar field from Sql2k to varbinary in a sql25k through a dtsx package. We get an error which tell us: "data will be lost".
Does anyone have any idea about that?
Thanks for your time and inputs,
View 1 Replies
View Related
Apr 21, 2008
Hello,
I'm trying to insert a string expression into a varbinary field. I've tried it several ways, but the data does not seem to get inserted.
I map DT_STR field ("T") with varbinary field in destination table and the package executes properly, but when I see the data that it has been loaded I only see empty values (0x).
I have also tried other approaches, like converting to DT_BYTES during SSIS flow, but I always get the same result.
Any idea of how to achieve this?
View 1 Replies
View Related
Apr 11, 2008
Hi,
We serialize a custom object into a byte array (byte[1000]) and store it in a SQL Server 2005 table column as varbinary(1000).
There are a lot of rows retrieved with each SqlDataReader from C# code: up to 3,456,000 rows at a time (that is, roughly 3.5 million rows).
I am trying to figure out what will be more efficent in terms of CPU usage and processing time.
We have come up with quite a few approaches to solve this problem.
In order to try a few of them, I have to know how I can extract certain "pieces" of data from a varbinary value using T-SQL.
For example, out of those 1000 bytes, at any given moment we need only the first 250 bytes and the third 250 bytes.
Total: 1000 -> [250-select][250-no-need][250-select][250-no-need]
One approach would be to get everything and parse it in C#: get the 1st and the 3rd chunks of data and discard the unneeded 2nd and 4th.
This is WAY TOO BAD.
Another approach would be to delegate the "filtering" job to SQL Server so that SqlDataReader gets only what it needs.
I am going to try a SQL-CLR stored procedure, but when I compared performance of T-SQL vs. SQL-CLR stored procs a few weeks ago, I saw that the same job is done by T-SQL a bit faster AND (more importantly for us) with less CPU consumption than SQL-CLR.
So, my question is:
how do I select certain "pieces" of varbinary column data using T-SQL?..
In other words, instead of
SELECT MyVarbinary1000 FROM MyTable
how do I do this:
SELECT <first 250 from MyVarbinary1000>, <third 250 from MyVarbinary1000> FROM MyTable
?
Thank you.
View 4 Replies
View Related
Jul 10, 2015
I need to convert varbinary data to some other datatype. Is there any way by which we can change this ?
In my project requirement I am  migrating    sql server data to some other database (EXASOL) destination have no varbinary datatype supported.
how can I move this data to my destination.
View 4 Replies
View Related
Mar 31, 2008
Hi Gurus,
Here is my problem-:
I have a field in the SQL 2005 database with type varbinary(50). Now when i enter value to this field, I enter a value for example 111111101. The reason to enter such a value in varbinary(50) type is, that this value is meant to grow, as each 1 and 0 in this value is a permission or right my user would have to various features of the web application, I am designing. Now when I open the table to see the data in the database, it shows as <Binary data>. But that's okay, as binary fields are mostly meant to store pictures, files etc. But when I read this value into my ASP.Net code using c#, the value as returned as 069F6BBD. After some research I realized that for decimal value 111111101, the hex value is 069F6BBD.
All I need in my code is the same thing that I entered which is 111111101.
Can someone guide me a lil bit.
Thanks in advance..
VJ
View 7 Replies
View Related
Apr 20, 2008
Hello,
I'm working on a website that allows users to upload small JPEG files. I followed the article at http://aspnet.4guysfromrolla.com/articles/120606-1.aspx. On the webpage I'm using a formview control to insert new records in the database. As suggested in the article I removed the "type='object'" from the insert parameters for the image column. The data is saved by using a sqldatasource with stored procedures. The image column is of type varbinary(max) and allows null values. Everythings works fine as long as the user uploads an image. The data is saved correctly and on another page the image can be viewed. However if the user does not upload a picture and tries to save the new record the following error is thrown:
�Implicit conversion from data type nvarchar to varbinary(max) is not allowed. Use the CONVERT function to run this query.�
In the formviews iteminserting event I have the following code: Dim imageBytes(fileupload1.PostedFile.InputStream.Length) As Byte fileupload1.PostedFile.InputStream.Read(imageBytes, 0, imageBytes.Length) e.Values("Image") = imageBytes What code should I use in case the fileupload1 has no file? I tried something like: e.values("Image") = dbnull.value But that doesn't work. Any suggestions?
View 5 Replies
View Related
