We are getting timeouts from SQL server and workstation (all SQL 2000) when trying to connect to a SQL 7 on the Internet (behind firewalls) except for one server which is always successful. We've tried swapping IP address, computer (NT) names etc to no avail. The ISP SQL guru has been unable help.
Would appreciate reply by e-mail.
Hi GuysUpon creating and running a view in the SQL Svr 2000, Enterprise managerthat takes more than 30 secs to return, I get an 'ODBC SQL Driver Timeoutexpired'. I have tried resetting every timeout I can find but it makes nodifference. Its damned irritating as this is an ENORMOUS DB and most of theviews I create are going to take 60 seconds + to return.Anyone know how to reset the timeout to suit the circumstances.CheersPaulBJ
View 1 Replies View RelatedReceiving error "Microsoft ODBC Server Driver Timeout Expired".
This is happening when running queries or stored procedures through VB6 and also in Enterprise Manager.
Have set query timeout to 0 and command timeout to 0 but no joy.
Enterprise manager cannot even perform a count of records (16Million) without timeing out.
Can anyone help...at end of tether!
Cheers,
Brookesy
Hi,
I have two windows 2000 server with sql server 2000 installed. I want to record one server in the enterprise manager of the other server.
But, I receive an error as "Timout expired". So the record could not success !
Please help me
Michel
Hi,
I have SQL Server 2000 with SP4. When we take backup from Enterprise manager its fails with error "timeout expired". But when we take backup from query analyzer it works.
It seems that through enterprise manager 30 sec is the non configurable timeout parameter set. Checked sysprocesses table during backup but there was no blocking during that time at least for that spid.
Is there a way to find out which process is blocking the database backup? Also, what are the possible scenarios where database backup can be blocked.
Thanks,
Ramesh
Hi All,
This is first time I am trying to ste timeout on SSIS package ,Can some one let me know which is the best way to set timeout for connection?
And what is the difference between General TimeOut and Command TimeOut?
Thanks,
Shilpa
On one of our machines, all of the SQL Server 2000components except for the main Server component (SQL Servercore) itself were installed (Management tools, etc) a while agoand everything was running fine. Now I go and add/install theServer component and then Service Pack 3a.It seems that Service Manager won't start up (I get an hourglass cursor)and now I find that Enterprise Manager won't run as well. No errormessages appeared and I don't think I saw anything unusual inthe log file.However, I can use Enterprise Manager on a differentmachine and connect to the database (so the databaseitself seems to be running).Any suggestions as to what the problem might be and how tofix it? I like to see if I can repair this without havingto do a reinstall.Thanks.PF
View 2 Replies View RelatedIF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
View 2 Replies View RelatedMaybe this is the wrong forum to post in...
My Problem is to use the webinterface of the report manager of the sql reporting services.
I have troubles by editing some subscriptions. Whenever i go to a report, click on subscriptions, click on edit and edit some values, click on Ok, wait 1 minute I get a timeout.
For some reasons it only does not work if i call the report manager via the network-address (10.0.0.2).
However localhost, 127.0.01 or plh002 (this is the computername) works fine for me. Is this a setting in IIS?
Thanks for any hint.
Hi
has anyone used this tool to upload sql databases to a web host
i'm struggling
cheers!!!
Adrian
I installed SQL Server MSDE 2000 but I can't find how to start it. Does this package include an Enterprise Manager or not? I thought that maybe it was a standard XP Pro feature. I had no problem finding it in W2000 Pro.
View 1 Replies View RelatedWhen I open databases, there is nothing there - not even Master, Model, Temp, Pubs, etc.
When I open the query analyzer, however, they all appear in the drop down.
What is up with that? and how can I remedy?
OP sys:Win98
SQL Server 7
Has anyone encountered this error: When you are in Enterprise manager and you select a database then the tables tab and then you select a table and go to open table- select all rows, I get an error--An unexpected error happened during this operation-Query Designer encountered a query error! Please let me know if you have seen this. Also, when I access this from one networked computer I get the same error, then when I access it from another I do not!! The servers are interacting with Pivotal. The one that works does not!!
View 3 Replies View RelatedHi all,
I have SQL 7.0 desktop addition installed on my local win NT workstation. I am able to connect to my local server using Quary Analyser but when i am trying to connect using EM, i am not able to connect. I am receiveing the following error message.
__________________________________________________ ___________________________
A conncetion could not be established to "servername" - Specified SQL Server not found. ConnectionOpen(CreateFile()).
Please verify SQL server is running and check your SQL Server registration properties(by right clicking "servername" node) and try again.
__________________________________________________ ___________________________
I have tried as said in the error message and also tried connecting with "sa" but its not working. I can see that the server is running and i am able to connect through QA.
any help is highly appriciated.
We can no longer open tables in EM. The error message is;
An unexpected error happened during this operation
[Query] - Query Designer encountered a Query error:
Unspecified error
The tables are fine - can access them other ways.It looks as if the fault is in the script used by EM. Anyway to clear this ??
I am fairly new sql dba in a company and I am sure Enterprise Manager is installed on PC's and it shouldn't. Is there a way of finding out other then visiting each workstation. Thanks in advance..
View 1 Replies View RelatedI am considering upsizing my Access 2000 DB to a SQL 7 server. I was told that having SQL 7 Enterprise Manager is highly prefferd but not essential as I can maintain the upsized DB with Access 2000. The only way that I have been able to find JUST enterprise manager seems to be with purchasing the whole SQL 7 program for $1300! Microsoft cannot be that cruel, that you have to buy the whole program just for Enterprise Manager!
My questions are:
Can I download just MS SQL 7 Enterprise Manager anywhere for a reasonable fee or free?
and
if not, can I continue to use Access 2000 to maintain the SQL 7 upsized DB?
I have access to a SQL 7 server via my ISP Hosting account. I know Enterprise manager comes with the server software, but how can I get a copy of JUST Enterprise Manager?
JD
Is non-SA account able to view the SQL Enterprise Manager?
Thanks in advance!
Plum
Is it possible to administer both 6.5 and 7.0 databases from the same SQL Enterprise Manager? I have read that you cannot do this because the 7.0 "plug-in" to the MMC wont work with 6.5 databases.
View 2 Replies View RelatedWe had database corruption and cannot access the Enterprise Manager. DBCC returned errors 9000 to 9999 which I can't get any suggestions on how to handle from BOL. Any ideas!!!!! Thanks.
View 4 Replies View RelatedHi,
I would like to know if we can present users to access details database information about the databases on a server through Enterprise Manager.
If you create a SQL login and do NOT give it access to any database, if someone logons on your server with enterprise manager, even though he does not have access to any database, he will still see the list of all database on your servers plus tons of sensitive information like database owner.
Is is possible to limit enterprise manager to only view information about database that the user has access to?
Thanks
Mark
How can I force users of Ent Manager 6.5 to enter a name/password when connecting to a server that has been registered? I dont want to use the sa name and password so that anyone could use my workstation to access our servers.
View 2 Replies View RelatedDoes anyone know how to turn off or disable the auto discovery for Enterprise Manager. Apparently our Network group is complaining that Enterprise Manager is generating noise on the network, it is not signifcant in volume but they complain it impacts there ability to detect hacking attempts on our network because it causes some false positives. I generally keep Enterprise Manager running because I will always have some manual job running from it and we have so many servers it takes awhile for them to all load when I first fire it up.
Thomas
Hello guys,
Just wondering if i can use CPU, Memory usage, I/O or wait events for SQL trace. I am having difficulty in finding theses events on SQL trace.
Also is it possible to show the SQL trace file output in graphical format.
Thanks
Hi,
I have SQL server 2000 client machine on my XP desktop which worked fine
until yesterday.
Yesterday, I tried to set up client access (a tool from IBM to access AS400) unsuccesfully. Since ever, Each time I try to open a table in enterprise manager, I get the following error message
"The query cannot be executed because some files are either missing or not
registered. Run setup again to make sure the required files are registered".
While when I issue a query in analyzer it works fine.
I did that several times without success. Even, I removed the whole SQL 2000
setup, rebooted my machine, ran set up again for client tools which gave the
same result. Also, I re-setup MDAC2.6 SP2 but no way.
Which files are corrupted ?and I don't understand after doing all that,
setup goes smoothly without indicating any errors, but still when you open a
table in enterprise manager, it gives the same error.
Thanks in advance
Hi,
Using MS SQL Server 7. When I go into a table in design view and order by date created, it only orders on the day and not the date (Enterprise Manager) e.g.
29/08/1981, 11/12/2004, 31/12/2003
should be
11/12/2004
31/12/2003
29/08/1981
but it's this instead
31/12/2003
29/08/1981
11/12/2004
Please help.... is this a bug
Hi,
My Question is regarding the Query Analyzer.
When we click on the Query Analyzer Shortcut, it will prompt for a user id and password.but when we expand the databases node from EM and clicks on Tools->Query Analyzer Menu, after selecting a database node, the QA does not prompt for the user id and password. Can any one explain this behaviour of QA..
I am using Mixed mode authentication for my db server.
Hi All,
When I view the database properties using Enterprise Manager, some of the databases on the server are reporting that there is zero space available while others have space available. Does anybody know why?
Does anyone know where I can get a copy of Enterprise Manager? I have the trial copy of 2000, but I need to administer data on a SQL 7 server, and I cannot create stored procedures, add users, or create DTS packages in 2000 that will work on SQL 7.
Thanks!
Is it possible to add custom columns to the design table interface.
For example could I add custom column for some data on want to store under a table column. I am used to vb.net and I am able to add custom properties to a control. Is this type of customization possible for SQL Server. Is it possible to add a custom tab to the tab control where columns are located at the bottom of the designer?
I installed SQL Server Developer Edition on Windows 2003 server for our sales force.
I don't want them to have acces to enterprise Manager and Query Analyser.
How to disable these?
Thx
Venu
Hi all, I am not over familiar with SQL, I am a VB Programmer, however I need to achieve the following.
In Enterprise Manager I have 2 tables A and B.
I need to get a column from A and then scan the entire contents of B to see whether the content, the value from the column in A actually exists in B. The get the next value from A and repeat the process.
Any Help Would be appreciated.
Many Thanks