Enterprise Manager And Query Analyser Problem
Aug 31, 2000Hi there,
I have a customer who has an issue with a SQL 7.0 SP1 server.
When using Enterprise Manager to return all rows from a database
table the following errors occur:
ADVERTISEMENT
Query Designer Encountered A Query Error Via Enterprise Manager
Jan 7, 2002I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error.
We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database
maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go
into production in a few days.
Query Designer-Enterprise Manager
Jul 18, 2000Iam trying to see the rows using e/m i.e by right clicking tables and choosing return all rows option but it gives me an error but if i chose the other options(i.e. design table etc) it works well.only that return rows option in all the databases doesn't work.
Again iam able to retrieve rows from query analyzer.
The error which it gives is:
An unexpected error happened during the operation.
[Query]-Query Designer encountered a Query error:Unspecified error.
Please if anyone knows the solution mail it to l_muthu@hotmail.com
Thanks.
Enterprise Manager / Query Analyzer Tcp/ip
Dec 12, 2000How can I force Enterprise Manager and Query Analyzer to use TCP/IP?
While my applications connect instantly to the database
after I started using the NTL parameter in connect string, these 2
applications take forever and a number of retries to connect.
Can someone help?
Thanks
Liju
Cannot Open Query Analyzer From Enterprise Manager
Nov 29, 2006After I installed MSDE, I cannot open QA from Enterprise Manager - error message says: the specified file was not found. Any ideas anybody?
Thank you.
Alexander
Setting Query Time-out Not Using Enterprise Manager
Feb 8, 2005Hi,
I've set the Query time-out parameter for my default MSDE instance to 1 sec (through the Enterprise Manager) and since the restart of the server I can't connect it through any client tool.
Does anybody know how to return the default value of Query time-out (600s) without using enterprise manager?
thanx a lot
Difference Between Enterprise Manager And Query Analyzer
Jan 24, 2007Hi All,What are the pros and cons between using Enterprise Manager or QueryAnalyzer for my queries.Currently I use Enterprise Manager because I prefer the interface andonly use Query Analayzer when queries time out in Enterprise Manager,but I'm sure there must be more to it.Regards,Ciarán
View 1 Replies View RelatedEnterprise Manager Job Scheduler Vrs Query Analyzer???
Jul 20, 2005I run a stored procedure manually each day without fail using QueryAnalyzer.I.E. I right click in the browser window on the storedprocedure hit open and execute. I am trying to get my "DBA" toschedule this job in Enterprise manager and they keep getting syntaxerrors that make no sense and keep asking me to fix the code.Is there any difference in how the job scheduler executes a procedurevrs doing it in Query analyzer via Open/Execute that requires adifferent SQL syntax??? Im thinking that this problem is not the codebut a permissions issue What are your thoughts?
View 2 Replies View RelatedViewing Database Via Query Analyzer And/or Enterprise Manager
Sep 20, 2004We are running SQL 2000 SP3 on a Win2K server with multiple user databases. Our current problem is the ability of users to view the database objects via the native tools.
Example: User Bob
Bob has the following rights:
DB A – datareader/datawriter
DB B – datareader/datawriter
DB C – datareader
DB D – datareader
DB E – datareader/datawriter
The user has no builder rights or server roles.
In Enterprise Manager, the user can not see any databases. In Query Analyzer, the user can only see DB A, B, and C. Anyone seen this problem before and/or have suggestions?
Thanks in advance!
Enterprise Manager Cannot Display Table Records Or Run Query
Jul 23, 2005I have a new installation of SQL Server 2000 Dev Edition on a Win2K3 Standard Edition Server that I used for development. I just set this machine up in th last week and installed all Win2K3 patches and then installed SQL2K and SP3a. I have a single named instance. I just noticed today that I cannot view table data or use the Query part of EM. When I right click a table and select Open Table->Return All Rows it gives me an error dialog "An unexpected error happened during this operation". While the EM is diplaying this dialog the EM screen looks like Internet Explorer and says "Action Canceled - You might not have permission to view this directory or page using the credentials you supplied." I believe that this is a EM issue as I cannot view table content on other remote server. ANy ideas? Might this be an IE security patch disallowing some connectivity ?--Frank--Message posted via http://www.sqlmonster.com
View 1 Replies View RelatedSQL Enterprise Manager And Query Analyzer Displaying Different Row Counts
Jul 23, 2005The row counts I am getting from SQL Enterprise Manager and QueryAnalyzer are different. When I double click a table in EnterpriseManager it gives me a row count of say 1000. However, when I select *from that same table in Query Analyzer it returns 1028 rows. Anyoneknow why or better yet, how to fix it? Thanks!
View 2 Replies View RelatedCan't Find Enterprise Manager And Query Analyzer After Setup
Feb 28, 2007I downloaded the trial version of sql server 2005. but after installation, I couldnt find the Enterprise Manager and Query Analyzer. Any idea about that? Thanks.
View 3 Replies View RelatedEnterprise Manager, Query Analyzer, Client Tools Question
Mar 6, 2001Our installation has two instances of SQL Server 7. We have the client tools associated
with SQL Server 7 on our NT desktop. We will be implementing two servers running
SQL Server 2000 (SMS).
Ideally, on our NT desktop we would like to have one set of client tools (EM, Query Analyzer,
etc.) for supporting both versions of SQL Server.
Do we need both versions of client tools on our desktop?
Will SQL Server 2000 client tools support both versions of SQL Server?
Thanks in advance for your help!!!
Query Analyzer Does Not See Enterprise Manager Database And Vise Versa
Jul 23, 2005I am using SQL Server 2000.I have created a new database in Query Analyzer but I cannot see it inEnterprise Manager.I then created a new database in Enterprise Manager, but I can't see it inQuery Analyzer.How do I get these applications to see the databases that the other creates?Thanks,Greg
View 1 Replies View RelatedDefault Date Format Difference In Enterprise Manager Vs. Query Analyzer
Mar 13, 2008Not sure why SQL Server displays different date formats for the same date in Enterprise Manager query window vs. SQL Query Analyzer.
When I see table rows through enterprise manager the date field looks like 3/18/2008 12:30:00 PM
Whereas when I run a query a query in Query Analyser/or through any other application the date is shown in a different format: 2008-03-18 12:30:00.000
Is there a setting in SQL Server that can remove the date format inconsistency?
Translating Enterprise Manager And SQL Query Analyzer To SQL Server Management Studio
Nov 13, 2007Good morning,
I have a project that consists of modifying a report in Crystal. The problem is that I know very little about SQL and I need to add some data items to Crystal using SQL. The guide that I was given refers to Enterprise Manager and SQL Query Analyzer but they have since upgraded to SQL Server Management Studio. Can anyone translate the following statement into SQL Server Management Studio so that I can complete this process?
Best regards,
We will now edit the View on the MS SQL server. Open Enterprise
Manager and find the cst_adEnroll_MyInitials _vw in the Views
section of the database. Right-click, select Copy, then go to the
menu bar and Select Tools and SQL Query Analyzer. Once Query
Analyzer opens: Change CREATE to ALTER before the view name.
I Want To Restrict The My Clients To Access Database Through EnterPrise Manger Or Quer Analyser
Jul 20, 2005Hello AllI am using SQL server 2000 as the backend of my application but don'twant my clients tobe able to view or edit the database tables, storedprocedures , view etc using enterprise manager or query analyser (orsimilar tools)How can this be done ?I searched a lot for this but unable to get the correct answer isthere anybody to give full solution regarding this.Please relpy me as early as possible
View 2 Replies View RelatedProblems Running Enterprise Manager And Service Manager
Jul 20, 2005On one of our machines, all of the SQL Server 2000components except for the main Server component (SQL Servercore) itself were installed (Management tools, etc) a while agoand everything was running fine. Now I go and add/install theServer component and then Service Pack 3a.It seems that Service Manager won't start up (I get an hourglass cursor)and now I find that Enterprise Manager won't run as well. No errormessages appeared and I don't think I saw anything unusual inthe log file.However, I can use Enterprise Manager on a differentmachine and connect to the database (so the databaseitself seems to be running).Any suggestions as to what the problem might be and how tofix it? I like to see if I can repair this without havingto do a reinstall.Thanks.PF
View 2 Replies View RelatedHelp! Enterprise Manager Turns SQL Server Service Manager Off
Dec 6, 2006IF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
View 2 Replies View RelatedQuery Runs Fine In Query Analyser But Not The Query Debugger
Dec 19, 2003I'm running a query, actually its an insert that works when using the TSQL below.
However when I try to use the debugger to step through and using the exact same values as those below I get the following error:
[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
Its Killing me because everything else works, but this. Can somebody help.
DECLARE @NoteID INT,-- NULL OUTPUT,
@Note_Description NVARCHAR(3000),-- = NULL,
@Date DateTime,-- = NULL OUTPUT,
@ByWho NVARCHAR(30),-- = NULL,
@FK_Action_Performed NVARCHAR(40),-- = NULL,
@FK_UserID INT,-- = NULL,
@FK_JobID INT,-- = NULL,
@Job_Date DateTime,-- = NULL,
@Start DateTime,-- = NULL,
@Finish DateTime,-- = NULL,
@BeenRead NVARCHAR(10),-- = NULL
@FK_UserIDList NVARCHAR(4000)-- = NULL
--SET @NoteID = 409 --NULL OUTPUT,
SET @Note_Description = 'Tetsing'
--SET @Date DateTime = NULL OUTPUT,
SET @ByWho = 'GeorgeAgaian'
SET @FK_Action_Performed = 'Worked hard'
SET @FK_UserID = 5
SET @FK_JobID = 29
SET @Job_Date = 28/01/03
SET @Start = '1:00:20 PM'
SET @Finish = '1:00:20 PM'
SET @BeenRead = 'UnRead'
SET @FK_UserIDList = '1,2,3'
--AS
--SET NOCOUNT ON
SET NOCOUNT ON
SET XACT_ABORT ON
BEGIN TRANSACTION
SET @Date = GETDATE()
-- Insert Values into the customer table
INSERT Note (Note_Description,
Date,
ByWho,
FK_Action_Performed,
FK_UserID,
FK_JobID,
Job_Date,
Start,
Finish)
SELECT --@NoteID,
@Note_Description,
@Date,
@ByWho,
@FK_Action_Performed,
@FK_UserID,
@FK_JobID,
@Job_Date,
@Start,
@Finish
-- Get the new Customer Identifier, return as OUTPUT param
SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned
-- users.
IF @FK_UserIDList IS NOT NULL
EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record
-- Retrieve Address reference into @AddressId
-- EXEC spInsertForUserNote
-- @FK_UserID,
--@NoteID,
-- @BeenRead
-- @Fax,
-- @PKId,
-- @AddressId OUTPUT
COMMIT TRANSACTION
--------------------------------------------------
GO
Why The Query Works In Query Analyser And Doesn't Work In Reporting Service ?
Apr 30, 2007
Hello everybody,
I'm developing a report using the following structure :
declare @sql as nvarchar(4000)
declare @where as nvarchar(2000)
set @sql = 'select ....'
If <conditional1>
begin
set @where = 'some where'
end
If <conditional2>
begin
set @where = 'some where'
end
set @sql = @sql + @where
exec(@sql)
I run it in query analyser and works fine, but when I try to run in Reporting Services, Visual studio stops responding and the cpu reaches 100 %.
I realize that when I cut off the if clauses, then it works at Reporting services.
Does anybody know what is happening?
Why the query works in query analyser and doesn't work in Reporting Service ?
Thanks,
MaurĂcio
How To Query An Oracle Data From SQL Server Query Analyser
Sep 3, 2007
Hi ,
I am having 2 data store .
1. Oracle 10g
2 SQL server 2000
My requirement is that , i need to insert some data from sql server database table to oracle database using sql server query analyser or interface.
If there is any way ,plz let me know it
Thanks
Abraham
Is A Bug In Query Analyser
Sep 29, 2000Hi
This what i did , since i need to maintain
five sql servers ,i thought i will build a repository
so on my desk top (running sql server ) i created a
table name master_dbscript with the following fields
server_name varchar(20),
dbname varchar(20)
db_create_scripts text
using enterprise manager-- all tasks --generate sql scripts , (cut & paste
to the insert statement in query analyser, the following is the insert statement
insert into master_dbscript values ('isd11t','test','ALTER TABLE [dbo].[child] DROP CONSTRAINT FK_child_parent GO /****** Object: Trigger dbo.test_patcase Script Date: 25/08/2000 12:10:09 ******/ if exists (select * from sysobjects where id = object_id(N'[dbo].[test_patcase]') and OBJECTPROPERTY(id, N'IsTrigger') = 1)drop trigger [dbo].[test_patcase] GO ')
oops it created all the objects in the database where i tried to run the
insert statement. god saved me , i tried this with the test database.
when i tried the same with bcp it worked fine and i was able to see the
record in my table (one record) ,note you cannot use dts because it will support maximum 8000 chars only .
what is the problem with the query analyser ?
Help On Query Analyser
Aug 2, 2003Hi Everybody,
I am executing the following query in the query analyser.
"select * from alien119700 order by alienid"
In the message pane it shows
SQL Server Execution Times:
CPU time = 0 ms, elapsed time = 0 ms.
SQL Server parse and compile time:
CPU time = 0 ms, elapsed time = 4 ms.
SQL Server parse and compile time:
CPU time = 0 ms, elapsed time = 0 ms.
(43 row(s) affected)
SQL Server Execution Times:
CPU time = 0 ms, elapsed time = 454 ms.
SQL Server parse and compile time:
CPU time = 0 ms, elapsed time = 0 ms.
What does all this mesaages mean?
Can anyone explain this to me?
Thanx in advance.
Regards,
Samir.
SQL Query Analyser
Jun 6, 2002We use SQL 2K(service pack 1).Our query analyser will freeze often.So we loose all query production work.Does anyone know if Version 2 has a fix?Please help.
View 4 Replies View RelatedUsing Query Analyser
Jan 5, 2006I noticed that query analyser is much more quicker than EManager when I access my database from my hosting provider... is there any way to see the properties of the table X for example as one can do with EM...
I would be grateful if you could provide me with any query sample conserning this issue...
Thanks
Query Analyser
Mar 20, 2006Jst curios,
How does the Query Analyser connect to the database..does it use any of the ODBC or OLE DB API's
THx
Venu
Query Analyser
May 24, 2007I am currently using the trial version of SQL 2000 to connect to a remote db so I can query the data.
When the trial version runs out what can i do? will MSDE work for me or will the express edition of SQL 2005 be better?
Thanks! Bruno
Query Analyser
Feb 1, 2008Is there Query Analyser in SQLServer 2005 like there was in 2000 ? If so, how do I access it.
Thanks
Query Analyser
Jun 18, 2006Hi,
Can't seem to find which download includes Query Analyser, I have downloaded Management Studio Express
Help Please
Query Analyser Is Not Working
Jun 11, 2001Hi All ,
In my M/c the query analyser is not working when ever I try to run it by Using Enterprise manager / Explorer / Start menu - Program / Isqlw.exe.
When I Tried the task manager it shows the process isqlw is working. But I can't see any window coming up ..
Please help me otherwise I will go mad....using other tools to query . 50 % time i use this tool in work. U guys know how important it is ..
Thank u
Jeo
Query Analyser Is Not Working
Jun 11, 2001Hi All ,
In my M/c the query analyser (SQL 2000) is not working when ever I try to run it by Using Enterprise manager / Explorer / Start menu - Program / Isqlw.exe.
When I Tried the task manager it shows the process isqlw is working. But I can't see any window coming up ..
Please help me otherwise I will go mad....using other tools to query . 50 % time i use this tool in work. U guys know how important it is ..
Thank u
Jeo
Query Analyser Without SQL Server Name
Jun 3, 2004Hi,
I am studying SQL Server by myself (I am a Sybase DBA) and I have a little problem with the Query Analyser.
I actually have 2 server in my PC (XP) and I can see them via SQL Server Enterprise Manager, I also can open Query Analyser for these two server via Enterprise Manager.
When I try to launch SQL Query Analyser from the start menu, I can't see any of my two server and can't chose a connection.
Do I need to write some parameter somewhere?
It's not a big problem as I can work via Enterprise Manager but I just want to know.
Thank you for your response.
Eric