Hi,
I've got a problem where I try to edit the properties of a DTS package (Local and Repository) and Enterprise Manager simply closes without any warning. No error message, nothing.
This happens about 25% of the time. A work colleague is having the same problem. I am running NT4 SP6a and he is running Windows 95.
Is this a known problem ? Is there a fix ?
Thanks,
Tim
Hello:
I have been trying to run transfer manager to transfer all of the data
from the production database on one server to a test database on another
server(to refresh it). In order to make sure it runs on the server, I have
been scheduling it under EM to do so and I am pointing to the log on the
destination server on the EM Transfer panel.
For some reason, I am getting the following message in the destination
server error log:
99/02/16 10:24:41.42 ods Error : 17824, Severity: 10, State: 0
99/02/16 10:24:41.42 ods Unable to write to ListenOn connection
'.pipesqlquery', loginname 'sa', hostname 'TEMP09'.
99/02/16 10:24:41.42 ods OS Error : 232, The pipe is being closed.
99/02/16 10:24:41.42 spid17 Error : 1608, Severity: 21, State: 2
99/02/16 10:24:41.42 spid17 A network error was encountered while sending
results to the front end. Check the SQL Server errorlog for more
information.
I checked the event viewer error log and see no messages for today.
Can any one advise me what I need to do for this to run successfully?
Thanks. Any information furnished will be greatly appreciated.
David Spaisman
On one of our machines, all of the SQL Server 2000components except for the main Server component (SQL Servercore) itself were installed (Management tools, etc) a while agoand everything was running fine. Now I go and add/install theServer component and then Service Pack 3a.It seems that Service Manager won't start up (I get an hourglass cursor)and now I find that Enterprise Manager won't run as well. No errormessages appeared and I don't think I saw anything unusual inthe log file.However, I can use Enterprise Manager on a differentmachine and connect to the database (so the databaseitself seems to be running).Any suggestions as to what the problem might be and how tofix it? I like to see if I can repair this without havingto do a reinstall.Thanks.PF
View 2 Replies View RelatedIF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
View 2 Replies View RelatedI have had a lot of problems with my database connection for the last couple weeks it been ok but all of a sudden I used sourceSafe to checkIn all my files(been a while since I did this).Then I tried to run my project again after I checked them in and I get a database error. So I tried then checking out everything and same error. "Cannot open user default database. Login failed. Login failed for user 'HOWSERchobo'."Fails right when it tried to open my database.Here is how my connection stuff looks 1 SqlCommand comm;
2 SqlDataReader reader;
3 /* Grabs the stuff out of the database */
4 comm = new SqlCommand("SELECT HiraganaCharacter,HiraganaImage FROM Hiragana", getConnection());
5 /* opens the database */
6 comm.Connection.Open();
7 reader = comm.ExecuteReader();
8
9 protected SqlConnection getConnection()
10 {
11 /* Declares the connections for the database */
12 SqlConnection conn;
13 /*Grabs the connection string */
14 string connectionString = ConfigurationManager.ConnectionStrings["Japanese"].ConnectionString;
15 conn = new SqlConnection(connectionString);
16 return conn;
17 }
18
19 // in my webconfig file
20
21 "Japanese" connectionString="Data Source=HOWSERSQLEXPRESS;
22 AttachDbFilename=H:WebsiteJapaneseApp_DataJapanese.mdf;
23 Integrated Security=True"
24 providerName ="System.Data.SqlClinet"/>
25
Hi
has anyone used this tool to upload sql databases to a web host
i'm struggling
cheers!!!
Adrian
I installed SQL Server MSDE 2000 but I can't find how to start it. Does this package include an Enterprise Manager or not? I thought that maybe it was a standard XP Pro feature. I had no problem finding it in W2000 Pro.
View 1 Replies View RelatedWhen I open databases, there is nothing there - not even Master, Model, Temp, Pubs, etc.
When I open the query analyzer, however, they all appear in the drop down.
What is up with that? and how can I remedy?
OP sys:Win98
SQL Server 7
Has anyone encountered this error: When you are in Enterprise manager and you select a database then the tables tab and then you select a table and go to open table- select all rows, I get an error--An unexpected error happened during this operation-Query Designer encountered a query error! Please let me know if you have seen this. Also, when I access this from one networked computer I get the same error, then when I access it from another I do not!! The servers are interacting with Pivotal. The one that works does not!!
View 3 Replies View RelatedHi all,
I have SQL 7.0 desktop addition installed on my local win NT workstation. I am able to connect to my local server using Quary Analyser but when i am trying to connect using EM, i am not able to connect. I am receiveing the following error message.
__________________________________________________ ___________________________
A conncetion could not be established to "servername" - Specified SQL Server not found. ConnectionOpen(CreateFile()).
Please verify SQL server is running and check your SQL Server registration properties(by right clicking "servername" node) and try again.
__________________________________________________ ___________________________
I have tried as said in the error message and also tried connecting with "sa" but its not working. I can see that the server is running and i am able to connect through QA.
any help is highly appriciated.
We can no longer open tables in EM. The error message is;
An unexpected error happened during this operation
[Query] - Query Designer encountered a Query error:
Unspecified error
The tables are fine - can access them other ways.It looks as if the fault is in the script used by EM. Anyway to clear this ??
I am fairly new sql dba in a company and I am sure Enterprise Manager is installed on PC's and it shouldn't. Is there a way of finding out other then visiting each workstation. Thanks in advance..
View 1 Replies View RelatedI am considering upsizing my Access 2000 DB to a SQL 7 server. I was told that having SQL 7 Enterprise Manager is highly prefferd but not essential as I can maintain the upsized DB with Access 2000. The only way that I have been able to find JUST enterprise manager seems to be with purchasing the whole SQL 7 program for $1300! Microsoft cannot be that cruel, that you have to buy the whole program just for Enterprise Manager!
My questions are:
Can I download just MS SQL 7 Enterprise Manager anywhere for a reasonable fee or free?
and
if not, can I continue to use Access 2000 to maintain the SQL 7 upsized DB?
I have access to a SQL 7 server via my ISP Hosting account. I know Enterprise manager comes with the server software, but how can I get a copy of JUST Enterprise Manager?
JD
Is non-SA account able to view the SQL Enterprise Manager?
Thanks in advance!
Plum
Is it possible to administer both 6.5 and 7.0 databases from the same SQL Enterprise Manager? I have read that you cannot do this because the 7.0 "plug-in" to the MMC wont work with 6.5 databases.
View 2 Replies View RelatedWe had database corruption and cannot access the Enterprise Manager. DBCC returned errors 9000 to 9999 which I can't get any suggestions on how to handle from BOL. Any ideas!!!!! Thanks.
View 4 Replies View RelatedHi,
I would like to know if we can present users to access details database information about the databases on a server through Enterprise Manager.
If you create a SQL login and do NOT give it access to any database, if someone logons on your server with enterprise manager, even though he does not have access to any database, he will still see the list of all database on your servers plus tons of sensitive information like database owner.
Is is possible to limit enterprise manager to only view information about database that the user has access to?
Thanks
Mark
How can I force users of Ent Manager 6.5 to enter a name/password when connecting to a server that has been registered? I dont want to use the sa name and password so that anyone could use my workstation to access our servers.
View 2 Replies View RelatedDoes anyone know how to turn off or disable the auto discovery for Enterprise Manager. Apparently our Network group is complaining that Enterprise Manager is generating noise on the network, it is not signifcant in volume but they complain it impacts there ability to detect hacking attempts on our network because it causes some false positives. I generally keep Enterprise Manager running because I will always have some manual job running from it and we have so many servers it takes awhile for them to all load when I first fire it up.
Thomas
Hello guys,
Just wondering if i can use CPU, Memory usage, I/O or wait events for SQL trace. I am having difficulty in finding theses events on SQL trace.
Also is it possible to show the SQL trace file output in graphical format.
Thanks
Hi,
I have SQL server 2000 client machine on my XP desktop which worked fine
until yesterday.
Yesterday, I tried to set up client access (a tool from IBM to access AS400) unsuccesfully. Since ever, Each time I try to open a table in enterprise manager, I get the following error message
"The query cannot be executed because some files are either missing or not
registered. Run setup again to make sure the required files are registered".
While when I issue a query in analyzer it works fine.
I did that several times without success. Even, I removed the whole SQL 2000
setup, rebooted my machine, ran set up again for client tools which gave the
same result. Also, I re-setup MDAC2.6 SP2 but no way.
Which files are corrupted ?and I don't understand after doing all that,
setup goes smoothly without indicating any errors, but still when you open a
table in enterprise manager, it gives the same error.
Thanks in advance
Hi,
Using MS SQL Server 7. When I go into a table in design view and order by date created, it only orders on the day and not the date (Enterprise Manager) e.g.
29/08/1981, 11/12/2004, 31/12/2003
should be
11/12/2004
31/12/2003
29/08/1981
but it's this instead
31/12/2003
29/08/1981
11/12/2004
Please help.... is this a bug
Hi,
My Question is regarding the Query Analyzer.
When we click on the Query Analyzer Shortcut, it will prompt for a user id and password.but when we expand the databases node from EM and clicks on Tools->Query Analyzer Menu, after selecting a database node, the QA does not prompt for the user id and password. Can any one explain this behaviour of QA..
I am using Mixed mode authentication for my db server.
Hi All,
When I view the database properties using Enterprise Manager, some of the databases on the server are reporting that there is zero space available while others have space available. Does anybody know why?
Does anyone know where I can get a copy of Enterprise Manager? I have the trial copy of 2000, but I need to administer data on a SQL 7 server, and I cannot create stored procedures, add users, or create DTS packages in 2000 that will work on SQL 7.
Thanks!
Is it possible to add custom columns to the design table interface.
For example could I add custom column for some data on want to store under a table column. I am used to vb.net and I am able to add custom properties to a control. Is this type of customization possible for SQL Server. Is it possible to add a custom tab to the tab control where columns are located at the bottom of the designer?
I installed SQL Server Developer Edition on Windows 2003 server for our sales force.
I don't want them to have acces to enterprise Manager and Query Analyser.
How to disable these?
Thx
Venu
Hi all, I am not over familiar with SQL, I am a VB Programmer, however I need to achieve the following.
In Enterprise Manager I have 2 tables A and B.
I need to get a column from A and then scan the entire contents of B to see whether the content, the value from the column in A actually exists in B. The get the next value from A and repeat the process.
Any Help Would be appreciated.
Many Thanks
MMC cannot open the file C:Program FilesMicrosoft SQL Server80ToolsBINNSQL Server Enterprise Manager.MSC
This may be because the file does not exist, is not an MMC Console, or was created by a later version of MMC. This may also be because you do not have sufficient rights to the file
Note: I had admini rights on PC, and Network, I am able to run Query Analyzer....
I can remote into other boxes and run Ent. Manager also.
NEED HELP PLEASE
Hi all, met with something very scary and want to confirm if anyoneelse have met this possible bug with EM?Got a production DB, say DB_A with quite a few users in it. this day,when I look into the EM-->management-->Current Activity-->Locks/Object,I saw a lot of locking on some objects belonging to a user, say User_Abut the problem is, this User_A doesn't own a thing in DB_A!! And evenif I drop this user from DB_A, the EM GUI still showing there are quitea locks on objects owned by User_A.And if use Query Analyzer to direct query on system tables, all arefine, that is those locks are actually on another User_B, which isfine.So I've checked that the problem seems to lie in that User_B has a uid8 in DB_A whereas User_A has the same uid (8) in master db. Once Iremove User_A from master db, then the EM GUI shows no locking at all(though in system tables, there are still lockings in User_B's object).So I guess it's a bug in EM but has anyone met with this kind of casebefore?
View 5 Replies View RelatedWhere can I download "Enterprise Manager" I'm new to SQL.
View 2 Replies View RelatedI administer a website that is database driven on SQL. for the past few months i have been using Access project to edit my tables. I am switching to a host that does not support that and says I need SQL Enterprise Manager to work with my data. Does anyone have any simple ideas on what my next step should be? any suggestions would be appreciated.
View 5 Replies View Related