SQL 2000 SP3
================================================
In reviewing this screen, I have SPIDS > 100 that have a status of
sleeping, command = AWAITING COMMAND and login/batch dates that are
weeks old ... Shouldn't this list be more recent activity only ?
Thanks,
Craig
Hi again.
I have been deploying the first few test SQL 2005 machines recently, from what I was told is the full-feature edition DVD received from the https://licensing.microsoft.com website.
We have purchased a mixture of per-processor and per-user licenses to use for this software. However, I am never asked what licensing mode to use during the install.
Can anyone confirm or deny that a setup screen appears asking what licensing version you want to use (per-user or per-processor)?
I cannot confirm what was downloaded from the licensing-website because I don't have access through the company.
I have the same symptoms as seen on this postings:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=360181&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=510279&SiteID=1
However, I don't see such a Control Panel utility to change the licensing type.
Thanks to anyone who can assist.
I want to check who access the database in the sql server. When i go to current activity then process info. I found not all the users who access the database are displayed. Even though i refresh it. It didn't show up. But i am sure some user was accessing the database. Anybody know why, how can i avoid it. Thanks.
View 2 Replies View RelatedHello, i just check the process Info in the sql server enterprise manager, I found two same user but different host (such as host1 and host2), and also i have update problem that write confilct error messager (i use access as front end and sql server as back end)
Does the two process cause problem? Actually i found the host2 computer actually is dead, why that host appear in the process Info, any body has idea? Thanks in advance.
I have a SQLServer that gets accessed by some medical software through Citrix. So there are about 100 users at any point in time,but I can see 650+ Processes in Current Activity->Process Info in Enterprise Manager.
The company is complaining that if they dont reboot their SQL Server everyday it gets too slow to use. Does the # of Processes have any relation to their preformance issues?
I had a clients dba send me a peice of sql from the Last T-SQL command window from the process info screen under current activity in the enterprise mangler. It was a select query from a large table with no where clause.I setup profiler for all of the xxxx:completed events for the T-SQL and Stored Procedure Event Classes. I played with that part of the app for a while. I could not find my sql in the trace. I finally gave in and open the Mangler and I was able to reproduce it once but I still could not find the sql profiler. It is not in syscomments and I have a developer running a FIND in the app code.EDIT: I know the sql the query processor uses is not always the sql you send it.I am kind of confused about what that window shows I rarely use it for something like that. Anyone have any light to shed?
View 5 Replies View Relatedget the following error when I click on prview.
Build complete -- 0 errors, 0 warnings
[rsWarningFetchingExternalImages] Images with external URL references will not display if the report is published to a report server without an UnattendedExecutionAccount or the target image(s) are not enabled for anonymous access.
[rsInvalidMIMEType] The value of the MIMEType property for the image €˜image1€™ is €œtext/html; charset=utf-8€?, which is not a valid MIMEType.
Preview complete -- 0 errors, 2 warnings
This is the URL:
http://air101/airmaps/amsexpress.aspx?sym=bigdot&mlat=42.2446&mlon=-71.1649&lat=42.2446&lon=-71.1649&wid=0.012500&ht=0.012500&mpanv=0&mpanh=0
I've been told that image is a gif how should I set the mimeType?Or is this a security issue of some sort?
Hi, please i need to know where sql save (table) the info that i see in Managment/Current Activity - Process Info
thanks so much
Just recently I noticed something that I consider very strange on a SQL7.0 server with SP1.
In [Server -> Management -> Current Activity -> Process Info] I see a great number of rows(connections) around 70 or so that all have the same net_address value. However, the nt_loginame is different on each.
Q1: How can this be?
Q2: Isn't the net_address really the MAC of the network card?
Also, on a test SQL7.0 server with SP1 where the connections are far less (around 15 or so), I noticed the same problem. Luckily, because the connection count is low I was able to go around to each machine where the nt_loginame was used to log on and found that the net_address shown in [Current Acivity] didn't match any of these machines. Why?
-John
Hi, I need to know where SQL save the info that I see in the Managment/ Current Activity / Process Info
thanks so much
Dear AllI have problem with my database server which running SQL server 2000.The server running very slow. The worst case, to save a record requiredmore than 20-30 seconds.Since this problem, I usually monitoring Process Info from EnterpriseManager (Management - Current Activity), and I found a misteriousprocess as follow :1. User: SystemAccessTo: MasterStatus: BackgroundCommon: Task ManagerWaiting: >438 Million2. User: SystemAccessTo: MasterStatus: BackgroundCommon: Task ManagerPhysical IO: > 510003. User: Administrator (Join domain)Database: MSDBStatus: SleepingCommon: Awaiting CommandApp: SQL Agent Alert EngineCPU Usage: > 16 MillionAnybody know about these condition? Does it normal?ThanksMichael
View 3 Replies View RelatedHi,
Every one
If i go to any table from enterprisemanager & then go to return all rows it s
giving error that "Unexpected error happened during this operation
(Query)- Query DEsigner Encountered a query error unspecified error"
If i run query from QA It is working prefectly.
If Any one has come across this error please help
Thanks
Nirmal
hi,
is it possible to run my spc in enterprisemanages itself?
We have a sql 2005 server mirror set that we need to connect to.
I am in one active directory domain (eg DomainA) and the sql 2005 mirror is in another (eg DomainB).
We are not allowed (by the sql 2005 server provider) to put a trust between the two active directory domains and if we use a sql server login then if the mirror fails over then we will lose access since the master does not get mirrored.
Is there a way of logining in to the sql server 2005 mirror in DomainB with out logging my whole machine into DomainB or is there a way to mirror the sql users between the two sql 2005 mirror servers.
Any help would be grreatly apperiated
I want to be able to see when records have been added to a table. The issue is we have a DTS job scheduled to run every night. The developer who wrote it password protected it and doesn't work here anymore. I want to add a step to this series of DTS jobs and want to run it just prior to his job. Is there a way to see when the records are being added or when this job is being run? Thanks again, you guys are the best.
ddave
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
if you encountera problem of blue screen and then you reinstall NT server, what is the quickest way to restore sql back. after installation of windows nt sql will not start, please advice anyone who knows
View 1 Replies View RelatedHello,I am looking for help with the following situation.I have created a simple call tracking system that is integratedwith our accounting / warehousing program in the company. The calltracking system uses ASP 3.0 and MSSQL 2000 sitting on an Intranet webserver. All appears to be working well with the software. I amtrying to create a search screen to search through the calls based ondifferent criteria.I have an ASP script that generates a SELECT statement based onthe selected criteria but this is sent off to the SQL server as thestatement. I want to use a stored procedure to speed up the process.Is it possible to create a stored procedure for this search even whenthe WHERE clause and criteria keeps changing?TIA
View 3 Replies View RelatedHi all,
I have a simple question about RS.
I need to show all my reports in full screen mode but I don't find any properties in report.
I read in some threads to use ToolBar options but toolbar show or hide print, refresh, etc. but I want to hide the top bar because I don't want show search box or navigation bar!!!
Thanks for all your help.
Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
Well im trying to install some software on someone's cpu. I dont know his password, and he has forgotten. How do I get pass the login screen? and assign a new name and password. :confused:
View 2 Replies View RelatedHaiIs it possiable to close the current connection screen in the queryanalyser , not to close the query analyser.With ThanksRaghu
View 3 Replies View RelatedI have created a report, and want to now deploy it to the Report Server. Each time I try to do that, I get a Reporting Services Log In screen. I have no idea what to input, having tried my windows authentication and sa account without sucess. Is there something else that I need to set up so I can deploy my reports? Thanks in advance!
View 1 Replies View RelatedTechnical information:
***STOP: 0X0000008E (0XC0000005, 0X8062C26B, 0XA84E5A58, 0X00000000)
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support goup for further assistance.
What can i do to fix this problemHelp please, don't want to reinstall XP because i am running AutoCad on my PC.
This Blue screen of death is the worst!!!
Keron
Hi guys,
I recently installed SQL 2005 SP2 on my Vista x64 system. However, when I launch the SQL Server Management Studio, I don't see any server names available, even though I have one called SQL2005 listed as running in the Configuration Manager.
Any idea what I did wrong?
When I type in the correct SQL Server name "SQL2005" and click connect I get this error:
TITLE: Connect to Server
------------------------------
Cannot connect to SQL2005.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
Thanks in advance guys!!!
everything is ok.. the connection is on..the page can be loaded... no error....
BUT the data from the database cannot be retrieved... as in.. it just didnt load on screen...
i dont know whats wrong... i have follow all the steps show on a book.. can anyone pls help me?? thks
does anyone know of easy to use tools to design input screens to access sql version 7 databases
View 1 Replies View Related