Entries In UPPER In A Table
Mar 27, 2001Is there a way I can have all entries in a table automatically in caps once entered by user, import or any other way ?
Thanks a lot in advance.
-PFD
ADVERTISEMENT
Upper Limit For Rows In A Table?
Jul 20, 2007There may/may not be an upper limit for the number of rows in a table, but is there any performance-related limit?
I'm designing a database that stores results that have been acquired from a number of devices. Each device provides a set of data measurements every 10 minutes. Therefore each year a device will produce 52000 sets of results.
If I design a table to store a row for each set of measurements from a device (PK is based on the timestamp and the deviceID), and if there are 100 devices recording for 5 years, there will be 52000x100x5 rows. Would I get a performance increase by separating this data into one table per year? Perhaps the year could be appended to the table name to identify the particular tables.
A secondary issue is some devices can also be configured to produce a different set of measurements every 10 seconds. In this case there will be hundreds of millions of rows over a 5 year period. Therefore I am considering bulking the results into an array for a 10 minute period, and storing this array as a blob each 10 minutes. Is this going to be faster or slower than having hundreds of millions of rows?
Thanks in advance for any advice,
Mark.
Check Value In Table Upper Case Or Lower
Sep 20, 2006hi i want to select * from table1 where name =petter?now if there is many type of petter in table linke PETTER , Petter And petter which record will come in display?if i want all this three (PETTER,Petter,petter) will come in display which command is for this ??? regard
View 4 Replies View RelatedSQL Server 2012 :: Select Statement That Take Upper Table And Select Lower Table
Jul 31, 2014I need to write a select statement that take the upper table and select the lower table.
View 3 Replies View RelatedNo Further Entries Of A Value In Table
Mar 30, 2012I have a table which stores phone numbers of a customer in a table.
Say this table is as below
CustomerName - PhoneNumber
Customer 1 - Phone number 1
Customer 2 - Phone number 2
Customer 2 - Phone number 3
Customer 3 - Phone number 4
What would be the best approach to prevent adding another entry against Customer 2. I should be able to add new customers and add multiple phone number against all other Customers. The restriction should be only against Customer 2.
Getting Random Table Entries
Jan 20, 2008Hi,I have a form that should show 2 pictures based on table entries.I want those 2 pictures to be randomly selected based on a database table. So, my table has all the entries, and I want to pull out a random entry that has been approved to display it.Can someone help me with the sql query?I can do SELECT VoteId FROM tblVotes WHERE Approved=True..But how do I make selection a random one that changes every time the user gets another entry?
View 2 Replies View RelatedHow To Know The Order Of Entries In A Table
Jul 5, 2007For example some data has entered into a table in a random manner i.e the pk filed value is not in a serial fashion.Is there any table or index that holds the entries of rows into a particular table as entered .
i.e
'some_table' has data like this
3,entry3
2,entry2
4,entry4
1,entry1
I want some DB table or Index that holds data like this about above 'some_table'
row_id .... .... ....
1
2
3
4
here 1 refers to entry of the first column in 'some_table' i.e 3,entry3
and so on...
Duplicate Entries In The Resulting Table
Sep 20, 2007Hi! I am joining 3 tables in SQL , I am getting the results I want exept it's duplicated. So the resultinmg table fom my stored procedure has 3 rows that have the same bulletin. How do I filter the storedprocedure to output only the rows that don't have duplicate entries for the column 'Bulletin' Thanks.
Here is my stored procedure:PROCEDURE [dbo].[spGetCompBulletins]
@Userid uniqueidentifier OUTPUT,@DisplayName varchar(200)
AS
SELECT *
FROM dbo.UserProfile INNER JOIN
dbo.bulletins ON dbo.UserProfile.UserId = dbo.bulletins.Userid INNER JOINdbo.Associations ON dbo.Associations.BusinessID = dbo.bulletins.Userid WHERE UserProfile.DisplayName=@DisplayName
and Userprofile.Userid = @Userid ORDER BY Bulletins.Bulletin_Date
Return
Save DELETED Entries To New Table
Mar 23, 2008Hi all
I would like to know if its possible to "Save" records when they get deleted.
For example: I have a table, tblUsers, with coulmns, UserID, Name, Surname, etc...
In VWD I've created a GridView which shows everything on a webpage. I've also added a confirm return('Are you sure you want to delete the user?') option in OnClientClick field. What i want to achieve is, have some sort of log file, or log table if you want to call it that, of which users has been deleted by the end user. So, in later stages, i can see who deleted who, when, where, etc... - by building a report or view.
All this should go to a seperate database or seperate table, it doesnt really matter.
My delete query:DELETE FROM [tblUsers] WHERE [UserID] = @UserID
Prevent Duplicate Entries In A Table
Nov 11, 2003I have an ASP.Net Web appplication with a Back-End SQL DB. There are 3 Tables; Users, Groups, and GroupMember.
The GroupMember table is used to link Users to Groups and consists of just two fields; userID and GroupID.
Here is a sample of some data:
User1 Group1
User1 Group2
User2 Group2
User3 Group1
User3 Group3
Users can belong to multiple Groups. However, you shouldn't be able to have the same user and group comobination more than once. for example:
User1 Group1
User2 Group2
User1 Group1
I can stop this kind of duplicate data entry by doing a lookup first (using asp.net) to see if the entry already exists but this seems cumbersome.
Is there a simpler way to prevent duplicate entries in a table using sql?
Thanks a lot,
Chris
Appending And Deleting Entries In Table
Jul 11, 2014I have a question on appending and deleting entries in mysql table. This is my sample table.
table name: details
id_name | model | mode | media| first | end | id | level |
+--------------------+-------+---------+-----+-------+-------+--------+--------+
| PSK_30s1207681L002 | -1 | 1 | 5 | 14026 | 14684 | 6255 | q |
| PSK_30s1207681L002 | -1 | 1 | 5 | 14026 | 14838 | 6255 | q |
| PSK_30s1207681L002 | -1 | 1 | 5 | 14026 | 15236 | 6255 | q |
| PSK_30s1207681L002 | -1 | 1 | 5 | 14026 | 15423 | 6255 | q |
| PSK_30s1207681L002 | 1 | 1 | N | 14026 | 15627 | 6255 | q |
[Code] ....
I have numerous entries of same id name belonging to same median number.However,I want to only retain the entries having the longest first and end position and discard the remaining entries
E.g. for id name ="PSK_30s1207681L002" AND median = 5 we have four entries
id_name | model | mode | media| first | end | id | level |
+--------------------+-------+---------+-----+-------+-------+--------+--------+
| PSK_30s1207681L002 | -1 | 1 | 5 | 14026 | 14684 | 6255 | q |
| PSK_30s1207681L002 | -1 | 1 | 5 | 14026 | 14838 | 6255 | q |
| PSK_30s1207681L002 | -1 | 1 | 5 | 14026 | 15236 | 6255 | q |
| PSK_30s1207681L002 | -1 | 1 | 5 | 14026 | 15423 | 6255 | q |
| PSK_30s1207681L002 | 1 | 1 | N | 14026 | 15627 | 6255 | q |
But I want to retain only the one having longest first and end points ie
| PSK_30s1207681L002 | -1 | 1 | 5 | 14026 | 15423 | 6255 | q |
| PSK_30s1207681L002 | 1 | 1 | N | 14026 | 15627 | 6255 | q |
Here ,since for id name ="PSK_30s1207681L002" & median = N we have only 1 entry I want retain that one.
My final output in mysql table should look like this.
id_name | model | mode | media| first | last | id | level |
| PSK_30s1207681L002 | -1 | 1 | 5 | 14026 | 15423 | 6255 | q |
| PSK_30s1207681L002 | 1 | 1 | N | 14026 | 15627 | 6255 | q |
| PSK_30s1207681L002 | -1 | 1 | 3 | 14033 | 15627 | 6255 | q |
| PSK_30s1207681L002 | -1 | 1 | T0 | 15550 | 16050 | 6255 | q |
| PSK_30s1189731L001 | -1 | 1 | 3 | 999 | 7531 | 9808 | c |
| PSK_30s1189731L001 | -1 | 1 | 5 | 6609 | 8257 | 9808 | c |
[Code] ....
Is there anything that I could do to append it?
How Do I Should Temp Table Entries In SQL Debug Mo
Sep 5, 2007I am troubling SQL stored procedures. The SP has temp table created to contain data. How can I populate the temp table in the SQL debug mode?
View 1 Replies View RelatedTruncating Duplicate Entries In A Table
Sep 18, 2007Hi,
I have a table with no primary key and i just want to see all the duplicate entries on the basis of two columns. Can anyone suggest me how should i go about it.
Can anyone provide me the syntax for the same?
I have only 1 table say ISSR_TBL and two columns using which i want to delete the duplicate ones. i.e. MIN and MAX.
Please help me out...
Check Dupplicate Entries In Table
Feb 26, 2008Helo everybody,
How can i find a dupplicate entry in one table?
Searching For Entries In Subsequent Log Entries?
Dec 2, 2013If I wanted to search for Jobs as a particular status (e.g. 0130) and wanted to keep the jobs at this status until it has reached 0500, 0125, or 0900 in it's subsequent status log entry, how can I write the SQL for it to achieve it?
I have the following SQL which searches for the Jobs at 0130, but don't know how to develop it further to search on the requirement above.
------ SQL -------
SELECT
job.job_number,
(SELECT MAX(jsl.job_log_number)
FROM job_status_log jsl
WHERE
job.job_number = jsl.job_number AND
jsl.status_code = '0130') as Last_Early_Warning_Status_Entry
[code].....
In the job_status_log table above, there is a job_log_number field which increments by 1 when there is a new status log entry.
Periodic Removal Row Entries In A Data Table?
Mar 29, 2008Hi everyone,
I am using this temporary data table which gets cluttered after certain time (table is used for registering data waiting for email confirmation).
Is there a possibility to empty a data table automatically every day (at a certain moment)?
Kind regards,Maxime
Trigger Is Deleting Entries In Audit Table?
Aug 30, 2013The following is the trigger which create a row in the audit table when a single deletion is occurred.
ALTER TRIGGER [dbo].[TRG_Delete_tbl_attendance]
ON [dbo].[tbl_attendance]
AFTER DELETE
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
[code]....
I am trying to create a trigger which should prevent the bulk deletion. The following is the trigger which I have written, it is preventing the bulk deletion. But the problem is, it is removing the single deletion entries in the audit table. I want audit table to hold back the single deletion entries without allowing the bult deletion
ALTER TRIGGER [dbo].[TRG_Delete_Bulk_tbl_attendance]
ON [dbo].[tbl_attendance]
AFTER DELETE
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
[code]....
Updating Table - Trigger Duplicate Entries
Jun 12, 2014I got error while updating a table ,duplicate entries and trigger got fired ..so how to debug the trigger to know duplicate record.
View 1 Replies View RelatedResolving Duplicates Entries In Table Among 10 Databases
Feb 11, 2006HiOur product uses MS-SQL Server 2000. One of our customer has 10installations with each installation stroring data in its own database.Now the customer wants to consolidate these databases into one and wealready have plan for that by consolidating one DB at a time. But firstthey want to find how many unique or duplicate entries they have acrossall the 10 databasesAssumptions:1. All the databases reside on the same server. (This is just anassumption, not the real environment at customer site)2. Databases can not be merged before it is found how many unique orduplicate rows exist.Table under consideration:Message(HashID PK,....)# of rows in Message table in each of databases: 1 MillionHere is my question: How can I find how many unique or duplicateentries they have across all the 10 databases. I easily find uniquerows for two databases with a query like this:SELECT COUNT(A.HasID) FROM db1.dbo.Message A LEFT OUTER JOIN ONdb2.dbo.Message B ON A.HashID = B.HashID WHERE B.HashID IS NULLHow can I do this for 10 databases. This will require factorial of 10queries to solve this problem.I will appreciate if someone can provide hint on this.RegardsAK
View 3 Replies View RelatedHow To Force Unique Entries In A Linking Table?
Jul 20, 2005I have a table 'Group2Operation' that stores many to many relationsbetween the 'Group' table and the 'Operation' table (each group is haspermission to perform one or more of the available operations)PROBLEM=======I need to prevent duplicate entries being created. e.g. lets say thatin the 'Group2Operation' table a record links the 'editor' group tothe 'publish' operation. Should I prevent an administrator creating aduplicate of that record? (Otherwise deleting that permission willhave to be done twice or more for it to be effective)SOLUTION?=========So far I've done this with a trigger:CREATE TRIGGER Group2OperationDuplicates ON dbo.Group2OperationFOR INSERT, UPDATEAS UPDATE Group2OperationSET NoDuplicate = CONVERT(nvarchar(10),GroupID) + OperationTagThe 'NoDuplicate' unique index column in the Group2Operation tablestores a concatenation of the unique group and operation identifiers.So when an attempt is made to create a record, the trigger is fired.If there is a duplicate, this will mean a duplicate entry in the'NoDuplicate' column. As a result, the INSERT or UPDATE will fail andthe duplication will be prevented.WHAT DO YOU THINK?==================What do you think? Am I going about this in the right way? Is atrigger a good way to do this or should I rely on application logic toprevent duplicates?Any help appreciated by this db novice.John Grist
View 2 Replies View RelatedTransact SQL :: Find All Duplicate Entries In Table
Jun 11, 2015Someone ran an update statement multiple times so their are multiple entries in the table. What is the quickest way to track down the multiple entries? I would only want to see where timein and timeoff exist in the table multiple times for the same id. So this would be a duplicate
EntryID -- ID -- timein -- timeoff
1487 11 2015-05-05 16:33:23 2015-05-05 18:45:26
1623 11 2015-05-05 16:33:23 2015-05-05 18:45:26
Writting Trigger Or Procedure To Delete Duplicate Entries In A Table?
Sep 3, 2007I am using Sql Server 2000.
I have a customer table with fields - CustId, Name, Address, City, StdCode, Phone.
I used to insert entries in this table from an excel file.
One excel file will contain thousands of customer.
In this table combination of StdCode and Phone should not be repeated.
If I do it in my VB.Net coding.then application gets drastically slow.
So I want to write a procedure or trigger for this.
Here what I will do, I will send all records into database then this trigger or procedure will check for
any existing entry of combination of StdCode and phone. If entry exists then this will delete new entry
or will not allow this new entry.
Is this possible to do using Trigger or stored procedure?
SQL Server 2014 :: Find Multiple Entries In Two Fields One Table?
Sep 12, 2014I am trying to find books which have the same title and publisher name as at least two other books and need to also show the book ref (ISBN number). I have the below script so far:
SELECT isbn, title, publishername
FROM book
WHERE title in (SELECT title
FROM book
GROUP BY title
HAVING count(title)>2 or count(publishername)>2)
order by title;
This is a snap shot of the output:
ISBN Title Publishername
0-1311804-3-6 C Prentice Hall
* 0-0788132-1-2 C OSBORNE MCGRAW-HILL
* 0-0788153-8-X C OSBORNE MCGRAW-HILL
* 0-9435183-3-4 C Database Development MIS
* 1-5582806-2-6 C Database Development MIS
[Code] ....
What I should be seeing is only the ones I have put an * next to. What am I missing from the scrip?
Retrieving Data From Table With 7 Million Entries Takes Time
Jul 25, 2007Can anyone help me on this...
when i select data from table using select statement it takes huge amount of time....The table contains 7 million entries and when i select by mentioning a criteria it takes around 45 secs..The system has 4GB RAM and Dual Processing CPU. The select statement does not contain any grouping and all..
Will it take this much time to retrieve data.?.
The table does include an indexed field,
So can anyone help me on the different things i can do to make the retrieval faster?
Andy
How To Use SELECT UPPER
Mar 30, 2004Hi
I want to return distinct values from a table in uppercase
Have tried
SELECT UPPER DISTINCT fieldname FROM tablename
But returns an error, what is the correct syntax.
Thanks
Converting To Upper Case
Aug 13, 2001Is there a method for converting the first character of a account name to uppercase and the the remaining characters to lower case? I've used the substring procedure but for a name like 'MY NEW COMPANY', how could I convert it to 'My New Company' ?
Thanks,
Terry
UPPER Case Constraint
Mar 27, 2001Folks,
what script must I use, as a part of CREATE TABLE, to automatically convert characters to UPPER case on insert?
I wrote <CHECK (country = UPPER (country)> in the CREATE TABLE, which was wrong,
because the values were still in the lower case.
The sample script is:
CREATE TABLE address
(street varchar(40),
city varchar(20),
state char (2),
zip varchar (10),
country varchar (20))
When a user types "Canada", I want the inserted value be "CANADA"
Any help is greatly appreciated.
Upper Limit For SQL Server?
Sep 23, 2005I was wondering what more experienced DBAs have observed with regard to the capacity of a MSSQL DB. Is there an upper threshold of rows where performance becomes unacceptable? I have a fairly slow, but constant input rate of approximately 2,000 rows every 60 seconds or so (that is a little high, but I'm interested in worse case scenario here). That is up 172,800 rows a day. (I'm being overly pessimistic here.) We'd like to be able to keep all of this around as long as possible.
Or would a more heavy duty DB be in order for these sorts of data rates?
Upper Function In Where Clause
Jan 29, 2008Hi expert, I would like to ask regarding the UPPER function in SQL Query. I was tryin' to create a scipt that will give me a result of all the names that are in UPPER case format, but when I tried to execute the script the result is not right, it also retrieves all the records that are in PROPER case.
SQL Script:
SELECT id, name FROM table_1 WHERE UPPER(name) LIKE 'DAR%'
Result:
ID NAME
-- -------
1 Darren
2 DARREN
Upper Case Problem
Mar 12, 2008Table :Employee
name Age
'ARUN KUMAR' 30
name column should be displayed
as Arun Kumar
'A' and 'K' need to be upper can i know what function to use??
Upper Case Separation
Mar 26, 2008I am new to SQL and, unfortunately, actually do my work in Access 2003, but I have a question.
This is an example of what the data I am working with looks like:
AALADIN
AA-TACH EH65X, EH65V (V-Twin)
AA-TACH w/Robin 20 & 20.5 h.p. OHV
AA-TACH w/Wisc.-Robin EY21
ABI CONTRACTOR w/Honda 20 h.p. (V-Twin)
The all caps text strings at the beginning of the field need to end up in a separate field than the mixed strings, and the mixed strings need to stay together. The field length varies, as do the lengths of the all caps text strings. There are a lot of records, so I would be interested to know if there was a way to proceed without manually editing each line.
The
Replace() && Upper () In Stored Procedure
May 13, 2004Hi;
I have a stored procedure :
<code>
Create Procedure ControlDept
(
@DeptID nvarchar(10)
)
As
If Exists
(
Select DeptName From Departments Where
DeptID LIKE @DeptID
)
Return 1
Else
Return 0
Now I want to apply replace and upper functions to DeptID in database before saying
"DeptID LIKE @DeptID".
for example the parameter is :"D&V"
DeptID in database is:"d & v" //there are spaces
if I say DeptID LIKE @DeptID nothing is found because of character nonmatching
So I have to apply replace & upper functions to the column DeptID in database
but how?
can you help me please??
Convert Reserved Words To Upper
Jan 14, 2005We want to covert all reserved words
in procedures to upper case,any suggestions ?