Equivalent Tsql For Sql Server 2000 Is Needed [from Sql Server 2005 Only Tsql]
Nov 19, 2007
Can anyone please give me the equivalent tsql for sql server 2000 for the following two queries which works fine in sql server 2005
1
-- Full Table Structure
select t.object_id, t.name as 'tablename', c.name as 'columnname', y.name as 'typename', case y.namewhen 'varchar' then convert(varchar, c.max_length)when 'decimal' then convert(varchar, c.precision) + ', ' + convert(varchar, c.scale)else ''end attrib,y.*from sys.tables t, sys.columns c, sys.types ywhere t.object_id = c.object_idand t.name not in ('sysdiagrams')and c.system_type_id = y.system_type_idand c.system_type_id = y.user_type_idorder by t.name, c.column_id
2
-- PK and Index
select t.name as 'tablename', i.name as 'indexname', c.name as 'columnname' , i.is_unique, i.is_primary_key, ic.is_descending_keyfrom sys.indexes i, sys.tables t, sys.index_columns ic, sys.columns cwhere t.object_id = i.object_idand t.object_id = ic.object_idand t.object_id = c.object_idand i.index_id = ic.index_idand c.column_id = ic.column_idand t.name not in ('sysdiagrams')order by t.name, i.index_id, ic.index_column_id
This sql is extracting some sort of the information about the structure of the sql server database[2005]
I need a sql whihc will return the same result for sql server 2000
Per my client, when it creates the qualifier for 'HCPS-DEN"' it needs to create the qualifier as 'AD' not 'HC' . Currently, with the present update script its inserting 'HC' on all. I need it to say when the 'HCPS-DEN' is used, insert the 'AD' not 'HC'. Everything else should be the HC.
I tried using a CASE statement: CASE WHEN Description = 'HCPC - DEN' THEN 'AD' ELSE 'HC' END
however I get this back:
Msg 207, Level 16, State 1, Line 10 Invalid column name 'Description'.
I was trying to plug this part in where HC is being entered. I think its missing an obvious Join or maybe there is a better way to write this. Any help is greatly appreciated!!
declare @qualid int if 1=1 BEGIN if not exists (select * from medlists where tablename='ProcedureCodeQualifier' and Description = 'HCPC - DEN') begin declare @listorder int select @listorder=max(listorder)+1 from medlists where tablename='ProcedureCodeQualifier'
insert into medlists select 'ProcedureCodeQualifier',NULL,'HC','HCPC - DEN',@listorder,NULL,NULL,NULL,NULL,NULL,NULL,NULL,@listorder,getdate(),'CYSScript',getdate(),dbo.GetLogonId()
update medlists set dotid=medlistsid where medlistsid=scope_identity() end
select @qualid=medlistsid from medlists where tablename='ProcedureCodeQualifier' and Description = 'HCPC - DEN'
update procedures set CPTProcedureCodeQualifierMId=@qualid where proceduresid in (8634) END ELSE BEGIN select @qualid =(select top 1 medlistsid from medlists where tablename='ProcedureCodeQualifier' and Description like 'Health Care Financing Administration Common Procedural Coding System (HCPCS) Codes%') update procedures set CPTProcedureCodeQualifierMId=@qualid where proceduresid in (8634) END
Per my client, when it creates the qualifier for 'HCPS-DEN"' it needs to create the qualifier as 'AD' not 'HC'. Currently, with the present update script its inserting 'HC' on all. I need it to say when the 'HCPS-DEN' is used, insert the 'AD' not 'HC'. Everything else should be the HC.
I tried using a CASE statement: CASE WHEN Description = 'HCPC - DEN' THEN 'AD' ELSE 'HC' END
however I get this back:
Msg 207, Level 16, State 1, Line 10 Invalid column name 'Description'.
I was trying to plug this part in where HC is being entered. I think its missing an obvious Join or maybe there is a better way to write this. Description is being used after the first BEGIN. I know it needs to also go into my insert somehow, but I'm not sure how or if there is an easier way to do this. Any help is greatly appreciated!!
declare @qualid int if 1=1 BEGIN if not exists (select * from medlists where tablename='ProcedureCodeQualifier' and Description = 'HCPC - DEN') begin declare @listorder int select @listorder=max(listorder)+1 from medlists where tablename='ProcedureCodeQualifier'
insert into medlists select 'ProcedureCodeQualifier',NULL,'HC','HCPC - DEN',@listorder,NULL,NULL,NULL,NULL,NULL,NULL,NULL,@listorder,getdate(),'CYSScript',getdate(),dbo.GetLogonId()
update medlists set dotid=medlistsid where medlistsid=scope_identity() end
select @qualid=medlistsid from medlists where tablename='ProcedureCodeQualifier' and Description = 'HCPC - DEN'
update procedures set CPTProcedureCodeQualifierMId=@qualid where proceduresid in (8634) END ELSE BEGIN select @qualid =(select top 1 medlistsid from medlists where tablename='ProcedureCodeQualifier' and Description like 'Health Care Financing Administration Common Procedural Coding System (HCPCS) Codes%') update procedures set CPTProcedureCodeQualifierMId=@qualid where proceduresid in (8634) END
I have been building a database in SQL Server Express for some months now using the Windows level authentication login that has given me full access to everything in the database.
The time has now come where I need to create user accounts and grant permissions to specific stored procedures and I'm having trouble doing this.
Can anyone give me a brief rundown of the required T-SQL commands I need to set up a user account that can do nothing but run stored procs (not the system procs which apparently are being discontinued: http://msdn2.microsoft.com/en-us/library/ms182795.aspx).
So far I have:-
CREATE LOGIN db_test_user WITH PASSWORD = 'eXaMpL3Pwd USE db_new CREATE USER db_test_user
The above code executes successfully but when I try and connect (using Management Studio) I get error message 'The user is not associated with a trusted SQL Server connection (error 18452)' which means little to me.
I also tried creating a 'WITHOUT LOGIN' user for the database but could not figure out how to give it a password.
I don't know (/understand) roles/schemas and don't know if I really need them as I only need user access to specific stored procs. I don't ever want them to see the tables for example so they only need the most restricted access.
I have two tables t_DTM_DATA_STAGING around 2 million records t_DTM_DATA around 251 million records
The below SQL statement looks for records in the t_DTM_DATA_STAGING table that are not in the t_DTM_DATA table and adds them to a 3rd table. (t_DTM_DATA_STAGING2)
This statement has been running fine for weeks, but now it seems to get hung every day. I ran sp_Who2 and it says the status is runnable. I let it run for around 5 or 6 hours the other day to see if it will finish but it didn't. This SQL job is step 3 in a 6 step SQLAgent job that usually finishes in 30 to 45 minutes.
I'm not sure how to troubleshoot this problem. No other jobs are running at the time this job runs.
Could this SQL statement be written a better way?
Thanks for any help anyone can provide.
Jerid
SET QUOTED_IDENTIFIER ON
INSERT INTO [DTM].[dbo].[t_DTM_DATA_STAGING2] ([CP],,[MAJ],[MINR],[LOCN],[DPT],[YEAR],[PD],[WK],[TRDT],[SYSTEM],[AMOUNT],[DESCRIPTION],[GROUP],[VENDOR] ,[INVOICE],[IDAT],[PO_NUMBER],[DDAT],[RCV#],[RDAT],[RSP],[EXPLANATION],[UPLOAD_DATE],[UPLOAD_USER],[UPLOAD_NAME] ,[RELEASE_DATE],[RELEASE_USER],[RELEASE_NAME],[TRTM]) SELECT t_DTM_DATA_STAGING.CP, t_DTM_DATA_STAGING.CO, t_DTM_DATA_STAGING.MAJ, t_DTM_DATA_STAGING.MINR, t_DTM_DATA_STAGING.LOCN, t_DTM_DATA_STAGING.DPT, t_DTM_DATA_STAGING.YEAR, t_DTM_DATA_STAGING.PD, t_DTM_DATA_STAGING.WK, t_DTM_DATA_STAGING.TRDT, t_DTM_DATA_STAGING.SYSTEM, t_DTM_DATA_STAGING.AMOUNT, t_DTM_DATA_STAGING.DESCRIPTION, t_DTM_DATA_STAGING.[GROUP], t_DTM_DATA_STAGING.VENDOR, t_DTM_DATA_STAGING.INVOICE, t_DTM_DATA_STAGING.IDAT, t_DTM_DATA_STAGING.PO_NUMBER, t_DTM_DATA_STAGING.DDAT, t_DTM_DATA_STAGING.RCV#, t_DTM_DATA_STAGING.RDAT, t_DTM_DATA_STAGING.RSP, t_DTM_DATA_STAGING.EXPLANATION, t_DTM_DATA_STAGING.UPLOAD_DATE, t_DTM_DATA_STAGING.UPLOAD_USER, t_DTM_DATA_STAGING.UPLOAD_NAME, t_DTM_DATA_STAGING.RELEASE_DATE, t_DTM_DATA_STAGING.RELEASE_USER, t_DTM_DATA_STAGING.RELEASE_NAME, t_DTM_DATA_STAGING.TRTM FROM t_DTM_DATA_STAGING LEFT OUTER JOIN t_DTM_DATA AS t_DTM_DATA_1 ON t_DTM_DATA_STAGING.TRTM = t_DTM_DATA_1.TRTM AND t_DTM_DATA_STAGING.TRDT = t_DTM_DATA_1.TRDT AND t_DTM_DATA_STAGING.PD = t_DTM_DATA_1.PD AND t_DTM_DATA_STAGING.YEAR = t_DTM_DATA_1.YEAR AND t_DTM_DATA_STAGING.DPT = t_DTM_DATA_1.DPT AND t_DTM_DATA_STAGING.LOCN = t_DTM_DATA_1.LOCN AND t_DTM_DATA_STAGING.MINR = t_DTM_DATA_1.MINR AND t_DTM_DATA_STAGING.MAJ = t_DTM_DATA_1.MAJ AND t_DTM_DATA_STAGING.CO = t_DTM_DATA_1.CO AND t_DTM_DATA_STAGING.CP = t_DTM_DATA_1.CP WHERE (t_DTM_DATA_1.CP IS NULL)
Hi guys, When I thought everything is okay with this script, I got a new problem... I have a VBA's script from Excel 2003 that builds sql script and retrieves data from SQL SERVER 2000. in order to make the sql running, I need to use a multi - batch processing, to pass and execute every command line once a time.
Up to here, I am using a test case with Account number = '123456' and getting the desire results. The code below is running okay with the test case, but when changing the account number (mark as yellow in the code) to include all the accounts (or just one other account), I am getting the following ERROR: run - time error '-2147217871 (80040e31)' - [Microsoft] [ODBC SQL Server Driver] time out expired.
Now, if I take the same code, with the condition that generates the ERROR, and try it into SQL Server, I get the results without errors. Thanks in advance, Aldo.
Below the code:
Code Snippet Function QuerySalesAging() '-------------------------------------------------------------- 'MUST !!! References: Microsoft ActiveX Data Object 2.1 Library '--------------------------------------------------------------
Dim ConnString As New ADODB.Connection Dim RecordSet As New ADODB.RecordSet
'Report Criterias Criteria05 = " AND " & "Accounts.ACCOUNTKEY Between " & AccountKeyAsRange ' -- ==> With AccountKeyAsRange = '123456' AND '123456' it works okay. ' -- ==> With any other value, in example AccountKeyAsRange = '123456' AND '9999999999' it get's ERROR.
CmdLine01 = " USE " & CompanyName
' Check and drop temporary table TemporaryTableName = "CTE" ' The table is a regular one CmdLine02 = " if object_id('" & TemporaryTableName & "') is not null exec('DROP TABLE " & TemporaryTableName & "') "
CmdLine03 = " SELECT ..." CmdLine03 = CmdLine03 & " INTO " & TemporaryTableName CmdLine03 = CmdLine03 & " FROM ..." CmdLine03 = CmdLine03 & " WHERE " & "(" & Replace(Criteria05, "AND", "") & ")" CmdLine03 = CmdLine03 & " ORDER BY ..."
You are troubleshooting a T-SQL stored procedure with a developer using SQL Server 2005. There are several update transactions and calls to other stored procedures within the stored procedure, and you suspect one of them is failing. You don€™t know which one. You don€™t want to heavily modify the stored procedure with error detection. What can you do to easily trap the error?
A stored procedure is called from an outwardly facing web application. The stored procedure uses dynamic SQL to retrieve data from a table. Is this a €œsafe€? thing to do? Why or why not?
A developer writes a T-SQL view that joins data from two tables. The code is as follows€¦
SELECT C.contactName, C.contactTelNo, F.fundManagerName, F.fundManagerTelNo FROM Contacts C, FundManagers F WHERE C.fundManagerId *= F.fundManagerId
When the view is executed, the developer notices differing result sets on a daily basis. Why?
I ma using sql server 2005.I have a bunch of statements of sql and i have created a stored procedure for those. When i execute i found that there is lot's of difference between execution time of stored procedure and direct sql in query windows.
can anyone help me to optimize the execution time for stored prcedure even stored prcedure is very simple. I have used sql server 2000 and i am new in sql server 2005.
Hi, I need to import an SQL string from MS Excel 2003 to SQL SERVER 2000. The string I need to import is composed by 5 different several blocks and looks like:
The detail of the SQL string is at: http://forums.microsoft.com/msdn/showpost.aspx?postid=2093921&siteid=1&sb=0&d=1&at=7&ft=11&tf=0&pageid=1
I am trying to implement OJ's suggestion: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2117223&SiteID=1 to use multi - batch processing to import the string to SQL SERVER, something like:
Code Snippet Dim SqlCnt, cmd1, cmd2, cmd3 'set the properties and open a connection
cmd1="use my_db" cmd2="create table mytb" cmd3="insert into mytb"
I have some deadlocks in defragging indexes in a sql 2000 db the defrag runs late @ night but the conflict is with a 24/7 app (email app) MY SQL job which calls an sp to defrag dbs get to be the dead locked victim (dooh) So I thought that I would: set SET DEADLOCK_PRIORITY '10' but i get SET DEADLOCK_PRIORITY option '10' is invalid This works in sql 2005 but not 2000. I can't set the apps connection to low. Any rate would any one know a TSQL 2000 example of setting the deadlock priority to 10 ? Please.
got some MS Access SQL Code that needs converting into TSQL:
SELECT dbo_qryMyServices.FormsServiceID, dbo_qryMyServices.ServiceName, Sum(IIf(IsNull([CompletionDate]),0,1)) AS Completed, Count([pkServiceID])-Sum(IIf(IsNull([CompletionDate]),0,1)) AS Uncompleted, Count(dbo_MyServiceRequests.pkServiceID) AS TotalCount FROM dbo_qryMyServices LEFT JOIN dbo_MyServiceRequests ON dbo_qryMyServices.FormsServiceID = dbo_MyServiceRequests.PostType GROUP BY dbo_qryMyServices.FormsServiceID, dbo_qryMyServices.ServiceName ORDER BY dbo_qryMyServices.ServiceName;
because it's Access and got VBA stuff in it - IIF and ISNULL, I can't figure out how to make it work in proper SQL.
I have created a job which performs linked server inserts, the job is scheduled to run every 15min. The Job inserts to a local linked server, some data from one of our log tables. That linked server inturn gathers more data from other servers and exports that data to another application for further processing.
My problem is that I need to reference local machine (DNS Name) as a variable which can be passed along with the linked server insert. If I can get the Server name dynamically I can run this as a remote job on 2 or 20 or 200 servers and It will give the log data and the name of the source server.
QUESTION: How Do I reference the server name from within TSQL as a variable.
Is there a way to connect to another server in a TSQL script. I would assume that there would be but, I must be missing it somewhere. I found the ESQL CONNECT TO function but, can't seem to get that working either. Any help (even telling me it's not possible) would be appreciated.
I have some simple TSQL running on a large block of data (565 million records). This process is estimated to take around 5 days and it is critical to get this running as quickly as possible.
I'm watching Windows Performance Monitor and both disk and CPU use are really low and all data is local so there is no network access involved. This is the only task running on this database server. How could this be? The process is running; I just need it to run faster. Typically a system is CPU-bound, disk-bound, network-bound, or operating under maximum capacity. This seems to be none of the above.
In Enterprise Manager, I see the process is sleeping with a Wait Type of "MISCELLANEOUS". What does that mean? Online help gives a pretty useless explanation of that.
I'm trying to find out how to determine the Server name of the server that a stored proc is running on. Something that is similar to DB_NAME() i.e. SERVER_NAME()
Hi AllBit of confirmation needed really, as I've just come home and found that myPC is only running SQL 7.0, when I know the below code only works in SQL2000 (I think!!!).What I want to do is put a particular DB in single user mode, do a DBCCrepair_rebuild then put it back to how it was all from a text file that isexecuted via osql (MSDE's isql equivalent). Will the below do it?alter database AccountsDataset single_userwith rollback immediategodbcc checkdb('AccountsData',repair_rebuild)goalter database AccountsDataset multi_usergoDo I need anything else, like use Master or something bearing in mind thetext file/osql method that I have to use?ThanksLaphan
There are three columns I need to query and rank, then group and total. I'm using MS SQL server 2000 and it doesn’t have a ranking function like the newer SQL server and oracle has. Does anyone have a clever way to create or simulate a ranking function? Thanks so much! Jake :confused:
Hello Guys!i have been working with oracle with quite a time. No i migrated to sqlserver 2000 and i want to create a trigger on a table.the trigger function has to update the Modification field to getdate()whenever a row is being updated.i tried lots of thingsif anyone can help i would appreciate a lot!Regards
Hello, I'm trying to build a integration service package importing data from XML files and directs this data to different MS SQL server 2005 Database tables. Can someone suggest me what is equivalent(mapping) data type of DT_UI8 in Sql server 2005 for Integration Services.
Or how to consume DT_UI8 fields in SQL server 2005.
Hi All,I am facing a problem with a sql what i used in MS Access but its notreturning the same result in MS Sql Server 2000. Here i am giving thesql:SELECT TOP 3 format( MY_DATE, "dddd mm, yyyy" ) FROM MY_TAB WHEREMY_ID=1The above sql in ACCESS return me the date in below format in onecolumn:Friday 09, 2003But in Sql server 2000 i am not getting the same format eventhough iam using convert function, date part function etc.Please if you find the solution would be helpful for me..ThanksHoque
hey all, i want to know Equivalent of "LIMIT" of MySQL in SQL Server 2005? in mysql we can direclty get data using LIMIT clause. my question is how to do this in sql server 2005? thanks.
Can anyone tell me how to do this in sql server?I am currently doing this query in oracle:select table1.col1,table1.col2,table2.col3,table4.col4where table1.col1 = table2.col3 andtable2.col3 = table4.col5 and(table1.col1,table1.col2) not inselect table2.col4,table2.col5 from table2it is the where two column values from any row are not found in anyrow in table2 part that I can't figure out.thanksJeff
hey all, i want to know Equivalent of Load Data Infile of MySQL in SQL Server 2005? in mysql we can direclty load file with Load Data infile query. my question is how to do this in sql server 2005? thanks.
well as you can see from my thread SQLServer is new to me i am used to mysql and i c'ant find the equivalent anywhere on the net... Seams easy enough but i have been at it for 6 hrs and i give up... I am just making a quick database view tool. So please tell me.
How do i load the all tables of a database via an sql command?
Since it took me a while to find this i thought migth as well slap ip somewhere so here is the command to load all data bases... In any case worked for me so...
- > select * from master.dbo.sysdatabases;
And where in the ... can you find a reference to all sql server commands? ... Please.
Hello Friends, I am not sure if this is the right place to post this question but if not please suggest me when it can be posted. I have been thinking of writing Stored procs in SQL CLR/ changing all of my Stored Procs to SQL CLR. Is there any thing that I need to keep in mind about the size of the sotred proc (like calculation intensive) before I do that? I mean can even change a TSQL stored proc which is relatively small Stored Proc, that simply said Select * from Customers to SQL CLR? or the SQL CLR does only useful/makes difference with calculation intensive stored procs and big stored procs? When I talked to our Architects they said every small sized stored proc can be written using SQL CLR and more over forget about the classic TSQL stored procs and get used to write SQL CLR when ever writing any database related stuff. And also there are so many articles that discussed about the advantages of SQL CLR over the TSQL but I would appreciate if some one could put few bulletted points why do you think SQL CLR is more powerful. Please advise.Thanks in advance,-L
