Err. Msg.: Cannot Perform SET Operation
Jan 18, 2003
I have a sp that creates a #temp table and performs a bulk insert.
CREATE TABLE #template (template varchar(8000))
EXEC ('bulk INSERT #template FROM "' + @filename + '"')
SET @html = (SELECT template FROM #template)
DROP TABLE #template
...
When I access this sp with any other user than 'sa' I get this error message:
The current user is not the database or object owner of table '#template'. Cannot perform SET operation.
I've been everywhere (with no success) in the sql srv admin to look for the appropriate check box to allow another named user to access this sp.
Can anyone help?
View 2 Replies
ADVERTISEMENT
Apr 14, 2008
IDENTITY_INSERT is already ON for table 'Elbalazo.dbo.DeliveryOption'. Cannot perform SET operation for table 'City'
Here's my entire script:
--------------------------------------------------------------------
/*Disable Constraints & Triggers*/
exec sp_MSforeachtable 'ALTER TABLE ? NOCHECK CONSTRAINT ALL'
exec sp_MSforeachtable 'ALTER TABLE ? DISABLE TRIGGER ALL'
/*Perform delete operation on all table for cleanup*/
exec sp_MSforeachtable 'DELETE ?'
/*Enable Constraints & Triggers again*/
--exec sp_MSforeachtable 'ALTER TABLE ? CHECK CONSTRAINT ALL'
exec sp_MSforeachtable 'ALTER TABLE ? ENABLE TRIGGER ALL'
/*Reset Identity on tables with identity column*/
exec sp_MSforeachtable 'IF OBJECTPROPERTY(OBJECT_ID(''?''), ''TableHasIdentity'') = 1 BEGIN DBCC CHECKIDENT (''?'',RESEED,0) END'
-- City
SET IDENTITY_INSERT City ON
INSERT INTO Elbalazo.dbo.City (
[CityID]
,[CityName]
,[CountyID]
,[Active])
SELECT [CityID],[CityName],[CountyID],1
FROM [ElbalazoProduction].dbo.tbl_City
SET IDENTITY_INSERT City OFF
-- State
SET IDENTITY_INSERT [State] ON
INSERT INTO Elbalazo.dbo.State (
[StateID]
,[State]
,[Active])
SELECT [StateID],[State],1
FROM [ElbalazoProduction].dbo.tbl_State
SET IDENTITY_INSERT [State] OFF
-- NumberOfPeopleOption
SET IDENTITY_INSERT NumberOfPeopleOption ON
INSERT INTO [Elbalazo].[dbo].[NumberOfPeopleOption]
([NumberOfPeopleOptionID]
,[NumberOfPeopleNameOption]
,[Active])
SELECT [NumberOfPeopleID], [NumberOfPeopleName],1
FROM [ElbalazoProduction].dbo.tbl_NumberOfPeople
SET IDENTITY_INSERT NumberOfPeopleOption OFF
-- DeliveryOption
SET IDENTITY_INSERT DeliveryOption ON
INSERT INTO [Elbalazo].[dbo].[DeliveryOption]
([DeliveryOptionID]
,[DeliveryOptionName]
,[Active])
SELECT [DeliveryOptionID], [DeliveryOptionName],1
FROM [ElbalazoProduction].dbo.tbl_DeliveryOption
SET IDENTITY_INSERT DeliveryOption OFF
-- User
SET IDENTITY_INSERT [User] ON
INSERT INTO [Elbalazo].[dbo].[User]
([UserID]
,[FirstName]
,[LastName]
,[Address1]
,[Address2]
,[CityID]
,[StateID]
,[Zip]
,[PhoneAreaCode]
,[PhonePrefix]
,[PhoneSuffix]
,[Email]
,[CreateDate]
,[Active])
SELECT [CustomerID]
,[FirstName]
,[LastName]
,[AddressLine1]
,NULL
,[CityID]
,[StateID]
,[Zip]
,[PhoneAreaCode]
,[PhonePrefix]
,[PhoneSuffix]
,[EmailPrefix] + '@' + [EmailSuffix]
,[CreateDate]
,1
FROM [ElbalazoProduction].dbo.tbl_Customer
SET IDENTITY_INSERT [User] OFF
-- EntreeOption
SET IDENTITY_INSERT EntreeOption ON
INSERT INTO [Elbalazo].[dbo].[EntreeOption]
([EntreeOptionID]
,[EntreeOptionName]
,[Active])
SELECT [EntreeOptionID]
,[EntreeOptionName]
,1
FROM [ElbalazoProduction].dbo.tbl_EntreeOption
SET IDENTITY_INSERT EntreeOption OFF
-- CateringOrder
SET IDENTITY_INSERT CateringOrder ON
INSERT INTO [Elbalazo].[dbo].[CateringOrder]
([CateringOrderID]
,[UserID]
,[NumberOfPeopleID]
,[BeanOptionID]
,[TortillaOptionID]
,[CreateDate]
,[Notes]
,[EventDate]
,[DeliveryOptionID])
SELECT [CateringOrderID]
,[CustomerID]
,[NumberOfPeopleID]
,[BeanOptionID]
,[TortillaOptionID]
,[CreateDate]
,[Notes]
,[EventDate]
,[DeliveryOptionID]
FROM [ElbalazoProduction].dbo.tbl_CateringOrder
SET IDENTITY_INSERT CateringOrder OFF
-- CateringOrder_EntreeItem
SET IDENTITY_INSERT CateringOrderEntreeItem ON
INSERT INTO [Elbalazo].[dbo].[CateringOrderEntreeItem]
([CateringOrderEntreeItemID]
,[CateringOrderID]
,[EntreeItemID])
SELECT [CateringORder_EntreeItemID]
,[CateringOrderID]
,[EntreeItemID]
FROM [ElbalazoProduction].dbo.tbl_CateringOrder_EntreeItem
SET IDENTITY_INSERT CateringOrderEntreeItem OFF
select * from BeanOption
select * from CateringItemIncluded
select * from CateringOrder
select * from CateringOrderEntreeItem
select * from CateringOrderEntrees
select * from City
select * from Country
select * from DeliveryOption
select * from EntreeOption
select * from NumberOfPeopleOption
select * from [State]
select * from [User]
View 15 Replies
View Related
Jul 20, 2005
I am trying to use Bulk Insert for a user that is not sysadmin.I have already set up the user as a member of "bulkadmin".When I run the following script:DECLARE @SQLVARCHAR(1000)CREATE TABLE amdbo.#temp ([id] [varchar] (10) NULL,[fld2] [varchar] (10) NULL,[fld3] [varchar] (10) NULL)set @SQL ='BULK INSERT amdbo.#tempFROM ''F: est.txt''WITH (DATAFILETYPE = ''char'', FIELDTERMINATOR = ''|'', ROWTERMINATOR= '''')'EXEC (@SQL)select * from #tempI still get the message ...Server: Msg 8104, Level 16, State 2, Line 1The current user is not the database or object owner of table '#temp'.Cannot perform SET operation.Anyone have an idea what I am doing wrong?Drew.
View 3 Replies
View Related
Apr 29, 2015
I have scenario in which I am getting a row from XLS and in that ro I have data for multiple tables based on if one table has some data or not
EXAMPLE :
Search a table in database on basis of column in the xls row
STEP #1 If TABLE A has that row then do nothing and move to next step else insert new row into TABLE A and move to next step
STEP #2 If TABLE B has that row then do nothing and move to next step else insert new row into TABLE B and move to next step
STEP #3 If TABLE C has that row then do nothing and move to next step else insert new row into TABLE C and move to next step
STEP #4 If TABLE D has that row then do nothing and move to next step else insert new row into TABLE D and move to next step
STEP #5 If TABLE E has that row then do nothing else insert new row into TABLE E
Currently I am trying to achieve this by using multicast and from that multicast putting inputs into 5 OLE DB DESTINATION but by doing this some time one step execute earlier then previous and integrity constrain violated so getting error.
View 5 Replies
View Related
Sep 29, 2009
I'm trying to install SQL Server 2008 on a virtual machine with Windows 2008 R2. Setup fails with the error "Attempted to perform an unauthorized operation". Looking at the installation log, I see these details:
2009-09-29 08:24:49 SQLBrowser: sRegLocation = 'SOFTWAREMicrosoftMicrosoft SQL Server', regView = 'Wow6432', sSddl = '(A;CI;KR;;;[SQLServer2005SQLBrowserUser$ITISFIM])', bOptional = 'False'.
2009-09-29 08:24:49 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
[code]....
View 35 Replies
View Related
Jul 23, 2005
Aaaaaarrgghh ! (that's better)I am trying to convert a field within my Oracle 9i Database that is oftype BLOB (but this BLOB may contain a combination of clobs/varchars orimages such as gif images, jpg images) to Microsoft SQL Server 2000using Microsoft DTS.On trying to perform this simple conversion I recieved the error "Needto run the object to perform the operation - Exception AccessViolation" from Microsoft DTS and my table that contains this BLOBfield is not converted across.After further investigation I implemented the fixes suggested by theMicrosoft Knowledge Base and "sqldts.com" but still no joy the errorkept occuring.I discovered my modifying the step in the DTS package that handled thistable conversion that contained the BLOB column that when I changed thedata type on my SQL Server target table to VARBINARY and modified thequery so that only the BLOBs that contained clobs/varchars were broughtacross that the error went away.I then proceeded to create another DTS package step that had a querythat only brought across the BLOB column that contained images such asgif images/jpeg images etc. and the error went away and the target typefor the SQL Server target table was set to IMAGE.As the data for this BLOB contains a combination of VARCHARS/CLOBS(concatanted) and also GIF IMAGES/JPEGS in the same source column withOracle 9i I require the same in my target table within SQL server asone column (and I should be able to do that with type IMAGE especiallyas it can store larger objects than VARBINARY but any source BLOBS thatcontain VARCHAR/CLOBs don't seem to want to be loaded as IMAGE theywill only load in to VARBINARY).However judging by my experiences above this doesn't seem to bepossible ?Can anyone help me out with this ?I am on Microsoft SQL Server 2000 Service Pack 4 with latest MDAC(2.8.1).Cheers,Gary
View 1 Replies
View Related
Feb 10, 2008
We have a nagging issue here in our application side, which I was trying to troubleshoot and reach no where. Can I have your valuable inputs for resolving/understanding the root cause of the issue?
3709-The connection cannot be used to perform this operation. It is either closed or invalid in this context
This error is not coming regularly (twice it happened and after the program is running successfully with out any problem). Problem having exe is running every 2 minutes interval.
Most of the sites saying this is something related to code written in the application but if that is the case why this error is not happening continuously? The problem having exe is running past 4 months with 2 minutes interval and suddenly thrown this error.
I found one MS site describing about this error but not able to find any fixes for this issue (http://support.microsoft.com/kb/839428). We are on the process of upgrading the operating system with SP2; will this help us to resolve this issue? Please advice.
Details
1. Windows 2003 with SP1
2. MDAC 2.8
3. SQL 2005 with SP1
4. VB Application.
View 1 Replies
View Related
Sep 18, 2015
I am getting an error about "Cannot perform a shrinkfile operation inside a user transaction", but I don't have a shrinkfile command in my procedure. Does SQL hang on to that command if it was received earlier in a different procedure?
View 5 Replies
View Related
Oct 25, 2015
I have an SSIS package, that move file from one folder (Download) to another folder (Working), where it will be processed and passed to (Processed) folder. The folder (Working) is created at run time and deleted after finishing process. I ran this package using SQL Server Agent (I created a sql job). My problem is that the package fails to move the file from Download to Working, Although it can move it to other folders (say I skipped Working and move it directly to the already-created folder "Processed").
I traced the problem and found the error "Access is denied", when run the package without Agent (double click). I provided the necessary permissions to all levels of folders to the user XX, which I made it the (SQL Server Agent Service Account) as well as the Job Owner. By this, the package executes successfully (again by double clicking it), but with Agent it FAILS.
Why Agent cannot move the file to the run-time-created folder (Working) ?
View 3 Replies
View Related
Apr 14, 2015
having on mind that this is my Target server: what is the way of creating shared folder in order to perform operation from the title (and, of course, to continue with installation of packages etc...)? SQL SERVER 2008 R2
View 26 Replies
View Related
Oct 20, 2015
Let's say if the date is 01/01/2015 till 01/01/2016
I want split these dates monthly format wise and then use them in variable in cursors to loop
For an example Monthly date should be 01/01/2015 and 01/31/2015 and use these two values in 2 variables and make a loop until it never ends whole date range which is 01/01/2016
View 2 Replies
View Related
Nov 20, 2013
I'm using SQL Server 2012 Analysis services in Tabular mode and connected to Oracle Database and while importing, I'm getting below error after importing some rows.
OLE DB or ODBC error: Accessor is not a parameter accessor.. The current operation was cancelled because another operation in the transaction failed.
View 1 Replies
View Related
May 10, 2007
Sorry to ask a stupid question. I have SQL Server 2000 on SBS 2003. I can't find Perform.exe. Anybody know where it should be (I'm sure that you all do!),
Thanks
Colin
View 4 Replies
View Related
Apr 14, 2008
Hi,any body pls help me with the concept called transaction ?Where excatly we are doin this ? In the SQL or through c# codings.i have 3 stored procedures, where i am calling this one by one to perform a single operation in the client side.if any one fails, due to some exceptions. it should rollback and come to the initial state.... How to perform this ? any ideas..
View 8 Replies
View Related
Jun 6, 2008
Hi all, I hope you guys can help me with the following bit of T-SQL. I already have a solution but I really don't like it and I've been trying to find a simpler more elegant way of doing the same thing.
Firstly, let me present you with a brief explanation of what I am trying to do together with some sample data for you to play with and hopefully assist me in finding a better solution than the one I’ve come up with.
So.. here goes
I have two tables:
create table #VehMake (VehMakeId int, VehMake varchar(100))
insert into #VehMake
select 222, 'FORD' union all
select 210, 'FORD (USA)' union all
select 223, 'FORD (AUS)' union all
select 269, 'HONDA' union all
select 253, 'NISSAN' union all
select 280, 'VOLKSWAGEN'
This contains various vehicle makes which I'm sure you'll recognise!
The second table contains vehicle histories:
create table #VehicleHistory (PersonId int, VehMakeVehModel varchar(200), VehMake varchar(100), VehModel varchar(100))
insert into #VehicleHistory (PersonId, VehMakeVehModel)
select 1, 'FORD (USA) MUSTANG' union all
select 2, 'HONDA CIVIC' union all
select 3, 'NISAAN ALMERA' union all
select 4, 'VOLKSWAGEN PASSAT'
As you can see, in the second table, the second column contains a string of the vehicle Make and Model in one string. What I need to do is to split the Make and Model in to separate columns with an update statement.
This seems easy enough with a simple LIKE comparison:
VehMakeVehModel like VehMake+' %'
....BUT if you notice, there are two records in the #VehMake table that are similar but not the same. These are the 'FORD (USA)' and 'FORD (AUS)'. The update statement would return two records from the #VehMake table when trying to match with the first record in my #VehicleHistory table.
As I said, I did come up with a solution but it seems over complicated and I have a feeling that there is a way of doing this with an update. Maybe use the LEN() function but I'm not sure.
Your help would be much appreciated.
BTW, once I've identified the correct Make, I can easily populate my model as all I have to do is use the replace function on VehMakeVehModel column and remove the matched make to get the full model name.
Hope that makes sense and thanks for any help in advance.
View 8 Replies
View Related
Aug 10, 2006
Hello all.
I am looking to perform a calculation and enter the reult into a field within my table. The fields that I need to base the calculation on are all in one table (SALARY). The fields are: SALARY and BASIC_HOURS and the result is to be entered into field HOURLY_RATE. The actualy calculation to be preformed is:
hourly rate = ()salary / 52)/basic hours)
Thanks for reading :)
View 4 Replies
View Related
Aug 31, 2007
Hello,
i am using Full text search for my web application search SP.
i have used Contains for Exact search and Freetext for Any word kind of search.
now i want to perform Like search using Contains.
same behaviour which we can get using LIKE word. (e.g. Select * from tbl where field like 'abc%')
even i have tried using contains(title,'"*Documen*"') . but its not working.
Kindly Let me know how to perform this.
Thanks.
View 3 Replies
View Related
Oct 11, 2006
I am using this SQL in a stored procedure:
INSERT INTO staff_address (staff_number, block_number, block_name) VALUES(@staff_number, @block_number, @block_name)
and I want to update the value @block_number from blocks database with:
SELECT * FROM blocks WHERE block_number = given_block_number
View 5 Replies
View Related
Sep 29, 2006
What i want:
Receive files from remote server every 8 hours daily,and if these files are all created during this period ,then execute next step
My thought:
I can receive files using FTP Task and i can set up job from Sql Agent
but how can i say whether these files are new or old?
Any idea? Thanks
View 4 Replies
View Related
Sep 5, 2006
this is my code: 1 myconnection = new SqlConnection(kiemtraloi,chuoiketnoi);
2 mycommand.Parameters.Add(new SqlParameter("@mancc",SqlDbType.VarChar,10));
3 mycommand.Parameters["@mancc"].Value = TextBox1.Text;
4 myconnection.Open();
5 myreader = mycommand.ExecuteReader();
6 if(myreader.HasRows)
And when I click to start button, a error appear: NO overload for method 'sqlconnection' takes '2' argumentsI don't know what i must do :(, please help methx
View 4 Replies
View Related
Dec 11, 2007
My e-commerce site is currently running the following process when items are shipped from the manufacturer:1. Manufacturer sends a 2-column CSV to the retailer containing an Order Number and its Shipping Tracking Number.2. Through the web admin panel I've built, a retail staff member uploads the CSV to the server.3. In code, the CSV is parsed. The tracking number is saved to the database attached to the Order Number.4. After a tracking # is saved, each item in that order has its status updated to Shipped.5. The customer is sent an email using ASPEmail from Persits which contains their tracking #.The process seems to work without a problem so long as the CSV contains roughly 50 tracking #'s or so. The retailer has gotten insanely busy and wants to upload 3 or 4 thousand tracking #'s in a single CSV, but the process times out, even with large server timeout values being set in code. Is there a way to streamline the process to make this work more efficiently? I can provide the code if that helps.
View 5 Replies
View Related
May 5, 2008
Hi all,
Lets say that i have 3 tables, they are already related together, information on each of the 3 tables and their relationship between eachother can be found below:I am using Microsoft SQL Server 2005 Database in Visual Web Developer 2008 using VB programming (ADO.NET)The 3 tables are as follows:
FloorRoomLocation
Fields inside each of the tables can be found below:
Floor Table(PK) ID(Required) NameDisplayOrder
Room Table(PK) ID(Required) Name(PK, FK) FloorIDExchangeIDExtensionIPDeviceNameRemarks(Required) Equipment(Required) Floor2IDFloorLocationXFloorLocationY
Location Table(PK,FK) FloorID (Required) CountryName(Required) CityName(Required) BuildingName
The Relationships between the 3 tables are as follows:
ID field in Floor table is referenced by the field named FloorID in the Room Table
ID field in Floor table is referenced by the field named FloorID in the Location table
NOTE: Location Table serves only as an extension to Floor table thus they have a 1 to 1 relationship, due to My Projects Lead's instructions I am not allowed to consolidate the Floor Table and the Location Table as 1 whole table.
Floor Table has a 1 to Many Relationship with the Room Table.
I Have already done the physical relationships between each of the 3 tables in the Database Diagram, in Visual Web Developer 2008 Express Edition under the Database Explorer
So i have created this form to accept user input:
this form is in a aspx page called AddRooms.aspx
Country Name:______________ (data sent to location table)
City Name:_________________ (data sent to location table)
Building Name:______________ (data sent to location table)
FloorID:[This is a DropDownList which is databinded to the Floor Table]
Room Name:_______________ (data sent to room table)
*Just imagine that the above is a form to accept user input
*With a hit of a submit button all data will be sent to their respective tables in the database
Now i know that i have to JOIN tables in my database in order for my application to work, but i have no experience performing JOIN, i need great guys like you to help me apply JOIN to the 3 tables mentioned above, do let me know if you have any doubts in what i am trying to do.
Do give me that code that i can either apply in the (VB environment Visual Web Developer 2008) and/or in Microsoft SQL Server 2005 environment
Just need the SQL Statment that i will need to construct to perform the JOIN i need to.
Please Help
Many Thanks : )
View 2 Replies
View Related
Feb 15, 2005
I want to build some paging functionality into my repeater (b4 you ask, datagrid not providing flexibility required for presentation).
I will have no problem with the VB logic but I will need to execute SQL that only returns results from x to y (e.g. results 21 thru 40 for page 2). I know I can do something like 'SELECT TOP 20 * FROM...', or something like it, for page 1. But, I'm not sure if it's possible to build SQL for the pages greater than 1. Any suggestions.
Thanks
Martin
View 1 Replies
View Related
Mar 22, 2007
I had my IT dept. install sql server 2005 enterprise edition on a new windows server 2003. All other machines are running sql 2000 server on windows server 2000. I am a sa and local admin on all servers. I tried performing copy database, backup and restore and detach and attach to upgrade the sql server 2000 databases to 2005 and all fail. I followed all steps. I was imformed that IT installed sp2 for sql server 2005. It's like the servers dont talk to each other. Their all on the company's domain. I am wondering if something happen with the install but the IT dept. insist that everything went fine. It's strange that I can't perform a simple backup and restore it on the new server buy when I click on restore it doesn't let me browse to get the backup file on the 2000 server. I never had a problem in Sql 2000 with backup. Can it be the installation was corrupted somehow. It seems fine. I haven't created any new databases because I wanted to move the databases from sql 2000. Can anyone help me get a clue of what the problem is please?
Thanks
View 2 Replies
View Related
May 31, 2008
Hi,
Appreciated someone able to provide me some clu on how to perfom DBCC CHECKDB. Is it necessary to set the database to "Read only" before execute DBCC CHECKDB?
Appreaciated your help.
Regards,
Jimmy Liew
View 3 Replies
View Related
Mar 22, 2007
I had my IT dept. install sql server 2005 enterprise edition on a new windows server 2003. All other machines are running sql 2000 server on windows server 2000. I am a sa and local admin on all servers. I tried performing copy database, backup and restore and detach and attach to upgrade the sql server 2000 databases to 2005 and all fail. I followed all steps. I was imformed that IT installed sp2 for sql server 2005. It's like the servers dont talk to each other. Their all on the company's domain. I am wondering if something happen with the install but the IT dept. insist that everything went fine. It's strange that I can't perform a simple backup and restore it on the new server buy when I click on restore it doesn't let me browse to get the backup file on the 2000 server. I never had a problem in Sql 2000 with backup. Can it be the installation was corrupted somehow. It seems fine. I haven't created any new databases because I wanted to move the databases from sql 2000. Can anyone help me get a clue of what the problem is please?
Thanks
View 1 Replies
View Related
Jul 23, 2005
hey guys--i need some expert advice!we have a Dell PE 2650 with 2GHz and 2MB RAM with 2000 Server. on it wehave about 6 MSSQL DB's. a couple of the DB's are the back-end for adecent sized web app (5-10 users on average, 20 users at most). manytimes, the cpu skyrockets on our db server when using the web app.sometimes things timeout, other times not. at this time, upgrading thehardware is not an option. aside from increasing the timeout periods, iwas wondering if windows 2003 server would utilize the processor better(even just a little bit?) enough to know the difference.should i attempt the upgrade, or is 2003 no more efficient withprocessor resources?thanks a bunch!
View 4 Replies
View Related
Sep 14, 2007
I'm working with ADO 2.8 en C++ with Visual Studio 2005. I want to perform a "select" in asynchronous mode. I don't really understand the logical of the recordset events. For example, I received a number of MoveComplete event higher than the number of rows in my recordset. It is really not clear for me ...
Does someone knows where I can find a a good example of C++ (or VB) code to manage select statements in asynchronous mode ?
Thanks in advance for your help.
François.
View 1 Replies
View Related
Nov 14, 2007
Hi everyone!
I am building a database in VC++2005 Express, connecting to SQL Server. I planed to add Delete function to a button, and when clicked, the data with the specific ID according to the IDTextBox->Text would be deleted from the table. However, nothing happened. I don't know what's wrong with my program.
I have attached the button_Click here. Thank you!
private: System:: Void button8_Click(System:: Object^ sender, System:: EventArgs
^ e) {
System:: Windows:: Forms:: DialogResult^ MyDlg=MessageBox:: Show("Are you sure
to delete?","Warning",MessageBoxButtons:: YesNo,MessageBoxIcon:: Question);
if (MyDlg==System:: Windows:: Forms:: DialogResult:: Yes)
{
if (this->sqlConnection1->State==ConnectionState:: Open)
{
this->sqlConnection1->Close();
this->sqlConnection1->ConnectionString="Data Source=(local);Integrated S
ecurity=SSPI;database=Pnemoconises";
this->sqlConnection1->Open();
SqlTransaction^ MyTransaction=this->sqlConnection1->BeginTransaction();
try
{
this->sqlCommand1=this->sqlConnection1->CreateCommand();
this->sqlCommand1->CommandType=CommandType:: Text;
this->sqlCommand1->CommandText="DELETE FROM [Basic_Info] WHERE Patient I
D='"+Convert:: ToString(this->Patient_IDTextBox->Text)+"'";
this->sqlCommand1->Transaction=MyTransaction;
this->sqlCommand1->ExecuteNonQuery();
MyTransaction->Commit();
}
catch (SqlException^ ex)
{
MyTransaction->Rollback();
}
catch (Exception^ ex)
{
MessageBox:: Show(ex->Message,"Information",MessageBoxButtons:: OK,Message
BoxIcon:: Information);
}
finally
{
this->sqlConnection1->Close();
}
}
}
}
View 4 Replies
View Related
Nov 6, 2006
hi
I have two versions of the same dataflow component , i need to use the new version component in the packages created using the old version . How can i do this using the perform upgrade method .
Thanks
Mani
View 9 Replies
View Related
Aug 2, 2007
I am trying to use a query analyzer to perform a task and I keep getting this message....how do I get around this?
View 1 Replies
View Related
May 23, 2008
Hello Friends. I have few doubts regarding the use of Sqldatasource server control. Is the control flexible enough to achieve these things:- 1.To perform complex queries using Sqldatasource. For eg:- using JOIN to retrieve/insert data from/into multiple tables.2.Performing cascading dropdownlist using sql database as datasource.3.Performing For loops eg:-populating the multiple items into the listbox from sqldatasource. and retrieving them at once.4.use ajax update panel.etc.any example/sample on how to achieve these task?thanks.jack.
View 3 Replies
View Related
Apr 17, 2004
Hi,
i would like to know how to lock a table from other to view when select statement..can anyone help me with that???
i tried
SELECT * FROM IMIS_FRAMEWORK_RUNNING_NUMBER with (HOLDLOCK,ROWLOCK)
WHERE running_type=@type;
but i m still able to see my row when i perform my SELECT STATEMENT from other query analyser..
Please help me with this..thank you
View 6 Replies
View Related
