Error 0x80004005 Request Is Not Available. Please Help!!

Apr 21, 2008



Hi,

I tried to confiure sql reporting service on vista box but I got the following page.


Server Error in '/Reports' Application.


Request is not available in this context
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Web.HttpException: Request is not available in this context

Source Error:





An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:





[HttpException (0x80004005): Request is not available in this context]
System.Web.HttpContext.get_Request() +3465893
Microsoft.ReportingServices.UI.Global.get_ConfigurationManager() +47
Microsoft.ReportingServices.UI.GlobalApp.Application_Start(Object sender, EventArgs e) +32

[HttpException (0x80004005): Request is not available in this context]
System.Web.HttpApplicationFactory.EnsureAppStartCalledForIntegratedMode(HttpContext context, HttpApplication app) +3385130
System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +125
System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +182
System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +259
System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +245

[HttpException (0x80004005): Request is not available in this context]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +3465475
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +69
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +675





I tried a lot of searches online but could not find any solutions. I am running Vista Ultimate, SQL Server 2005 and IIS 7. I am sure I configure everything right under "Default Web Site". The same config is running perfectly under XP. Can anyone help please?

View 19 Replies


ADVERTISEMENT

I Am Getting An Error Message When I Try To Print Using Reporting Services: An Error Occurred During Printing (0x80004005)

May 22, 2007

I am getting an error message when I try to print using reporting services: "an error occurred during printing (0x80004005)"

View 4 Replies View Related

Getting Error 0x80004005

Jan 2, 2007

Hi Everybody,

Iam a sql server developer,iam on a migration project,iam encountering an error when iam editing the control flow task.it says the sql server doesnot exist or access denied,pls can anyone help me on this.



Thanks and Regards,

sg

View 5 Replies View Related

Error Code: 0x80004005

Dec 5, 2006

I created a package that refreshes tables on one SQL Server to another SQL Server. First, I use an ExecuteSQL task to truncate the tables. Then I use a Data Flow task to copy the tables from one server to the other. Finally I update a log table. It was working fine with four tables. I added another table to the refresh and now I get these error messages:

[Source - RbcAcctSegment [1096]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".

[Source - RbcAcctSegment [1096]] Error: Opening a rowset for "[dbo].[RbcAcctSegment]" failed. Check that the object exists in the database.

[DTS.Pipeline] Error: component "Source - RbcAcctSegment" (1096) failed the pre-execute phase and returned error code 0xC02020E8.

RbcAcctSegment is the new table that I added. The errors occur in the Data Flow task. We have tried running this on a different workstation with the same results.

What would cause this?

Fred

View 5 Replies View Related

Xp_sendmail Failed With Mail Error 0x80004005

Jul 20, 2005

Hello!My environment is: Win 2000 Server, MS SQL-Server 2000 (SP2)and MS ExchangeServer 5.5the two following TransactSQL-codepieces show differentresults:1. with attachmentmaster..xp_sendmail@recipients = 'j.hetzel@rac.de',@subject = 'test',@message = 'test',-- ******************************@attachments = 'c: est.txt',-- ******************************@no_output = 'False'-->18025 level 16 state 1 line 0xp_sendmail failed with mail error 0x800040052. without attachmentmaster..xp_sendmail@recipients = 'j.hetzel@rac.de',@subject = 'test',@message = 'test',-- ******************************-- @attachments = 'c: est.txt',-- ******************************@no_output = 'False'-->Mail sent.why am I not able to send emails with attachments?Who can help me???Thanks in advanceJürgen

View 2 Replies View Related

Xp_sendmail: Failed With Mail Error 0x80004005

Feb 28, 2008



I'm a user of SQL 2000//2005, and I'm trying to send files using SQL Mail.



I'm am successful when I send a file of approx 13MB in size but, when I try to send a 24MB file, I receive the above subject error.



Is anyone aware of a file size limitation on attachments?

View 13 Replies View Related

Xp_sendmail: Failed With Mail Error 0x80004005

Mar 6, 2008



After consulting with the Exchange Administrator, I was advise that there is a limit on file attachments. This explains why I get this message with large (>20MB) attachments.

With this additional information I need to compress my file using a compression tool like winzip or pkzip. My company uses the windows version of pkzip. However, I have downloaded an evaluation version of the PKzip command line version.

Can someone provide guidance how I can execute this utility within my sql procedure?

View 4 Replies View Related

Error: 0x80004005 On Microsoft SQL Native Client

Nov 20, 2006

The below error happens when trying to use the SSIS Transfer SQL Server Objects Task to transfer objects. Related to (Bug?? Transfer SQL Server Objects Task - error when copying Views )?

--------------------

Error: 0xC002F325 at Transfer Data (NEW) Pre, Transfer SQL Server Objects Task: Execution failed with the following error: "ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80004005.

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".

helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".

Task failed: Transfer Data (NEW) Pre

View 2 Replies View Related

Hresult: 0x80004005 Description: Unspecified Error

Mar 25, 2008



hello all

i m getting the following error while exporting an excel file in SSIS

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".

is this a bug?
pls suggest a workaround.

View 2 Replies View Related

Error 0x80004005 When Copying Tables Between Servers

Feb 23, 2007

hi
I've got a job which copy tables between different servers .
I am feeding the tables one by one and the process of copying is in a loop so I have cotrol over the copying process.
it works fine but sometimes randomly I am getting
Execution failed with the following error: "ERROR : errorCode=-1071636471 description=SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".

and the process fails and this might happen for in any point and on any table and sometimes it runs all the way successfully!!
any idea what the problem might be!
Thanks

View 5 Replies View Related

The ExistsOnSQLServer Method Has Encountered OLE DB Error Code 0x80004005

Oct 2, 2006

I export data from a dozen tables of one database to another database on another server regularly and it works well. However, if i choose the option of "save SSIS package", I get the following error:

TITLE: SQL Server Import and Export Wizard
------------------------------

The operation could not be completed.

------------------------------
ADDITIONAL INFORMATION:

The ExistsOnSQLServer method has encountered OLE DB error code 0x80004005 (Client unable to establish connection). The SQL statement issued has failed.


------------------------------
BUTTONS:

OK
------------------------------




I use management studio to do this, but the servers are 2000.

Does anyone have any clue about this?

View 3 Replies View Related

Web Form OleDbException (0x80004005): Disk Or Network Error.]

Sep 25, 2006


Hi Everyone,

Hope you don€™t mind helping.

I am actually following exactly the example given in Karl Moore€™s €˜The Ultimate VB.net and ASP.net Code Book€™, ISBN 1-59059-106-2, Chapter 4, pp 141€¦

I am using VB.Net 2002 and create a Web Form, placing on it a Data Adapter, Connector and Dataset and link this to a Data Grid. The database is a quite large (150 Mb) Access 97 db that is shared over a network and the Provider is a Microsoft.Jet.OLEDB.4.0 connection. While in designer mode I can create the Dataset and even preview the data itself from the menu. When I run the project, the Web Form displays, connects to the Site (via IIS 5.1) but then the following error text is thrown all over the form:

Server Error in '/WebApplication3' Application.



Disk or network error.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.OleDb.OleDbException: Disk or network error.

Source Error:




An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:



[OleDbException (0x80004005): Disk or network error.] System.Data.OleDb.OleDbConnection.ProcessResults(Int32 hr) System.Data.OleDb.OleDbConnection.InitializeProvider() System.Data.OleDb.OleDbConnection.Open() System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) WebApplication3.WebForm1.Page_Load(Object sender, EventArgs e) System.Web.UI.Control.OnLoad(EventArgs e) System.Web.UI.Control.LoadRecursive() System.Web.UI.Page.ProcessRequestMain()




Version Information: Microsoft .NET Framework Version:1.1.4322.2032; ASP.NET Version:1.1.4322.2032

I have read and implemented the articles in the KB about setting up System TEMP variables and changing their rights and also setting up the ODBC key in the registry but these make no difference however I change them. I have also tried copying the database to the local machine, again to no avail.

The versions of the system I am using are:

Microsoft Visual Basic .NET 55524-640-5065381-18871
Microsoft Visual Studio .NET 2002 Service Pack 1 (KB837234)
Microsoft Developer Environment 2002 7.0.9955

I have no idea why what should be a very simple thing just fails so catastrophically. I am tempted to move to VB 2005 but if anyone can shed light on the problem I should be most grateful.

Many thanks for your time and Energy.
Jim McGoldrick

View 1 Replies View Related

OLEDB Command Transform Error Code: 0x80004005

Dec 20, 2007

I'm receiving an Error Code: 0x80004005 ... a "non-specific error" when trying to use a fairly simple insert in the oleDB command transform. SQL command works fine if I specify the parameters in the values clause of the INSERT statement. If however, I try to use the parameters in setting a variable, I get the 0x80004005 error. Is this a known issue/limitation, or am I just reallly doing something wrong?

View 4 Replies View Related

Microsoft JET Database Engine Hresult: 0x80004005 Description: Unspecified Error.

May 12, 2006

I have ran into the same problem ... Importing from Access into SQL 2005 using SSIS and get the error:

[Connection manager "SourceConnectionOLEDB"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".

View 3 Replies View Related

(Project Real Implementation) Error Code: 0x80004005 OLEDB Connection To SQL Server

Mar 25, 2008

Hi List
Im trying to set up an implementation of Project Real --it works like this-
Create two system environment variables called REAL_Root_Dir and
REAL_Configuration with the values given below. Click on
Start -> Control Panel -> System. Go to the Advanced Panel, click Environment Variables button, then New in the System variables box.

If the Project REAL files were installed at C:Microsoft Project REAL, then the variable values will be:

Variable Name: REAL_Root_Dir
Variable Value: C:Microsoft Project REALETL

Variable Name: REAL_Configuration
Variable Value: %REAL_Root_Dir%REAL_Config.dtsconfig



The package OLEDB connections work like this
First read enviroment variable to get location of config file
Next read Config File to get connection string for Config Database
<?xml version="1.0"?>
<DTSConfiguration>
<Configuration ConfiguredType="Property" Path="Package.Connections[SQL - Configuration].Properties[ConnectionString]" ValueType="String">
<ConfiguredValue>Data Source=(local);Initial Catalog=DataWarehouseABC;Provider=SQLNCLI.1;Integrated Security=SSPI;</ConfiguredValue>
</Configuration>
</DTSConfiguration>
Next read Config database to get connection strings for Source and Destination databases



Destination database is called "DataWarehouseABC"
Source database is called "SnapshotABC"


the Source database OLEDB connection works 100%
however the destination OLDB connection we get this error below
PS--Both source and destination databases are on the same development machine , however both databases are restored bak files from another production machine







Error 1 Error loading LoadGroup_Daily.dtsx: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login failed for user 'xxxxxx'.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot open database "DataWarehouseABC" requested by the login. The login failed.".


Any ideas on how one OLEDB Connection in this package can get this corruption


thanks in advance
Dave

View 5 Replies View Related

Linked Server Issue: OLE DB Error Trace [OLE/DB Provider 'SQLOLEDB' IUnknown::QueryInterface Returned 0x80004005

Aug 13, 2007

Window Server 2003 R2 Standard Edition (x64) SP1
Sql Server 2000 8.00.2039 SP4 Enterprise Edition (32 bit version)

A linked server is configured to a sql 2000 server and when I execute sql statement SELECT * FROM [LinkedServer].[Database].[dbo].[TableName] it gives following error message: -

Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'SQLOLEDB' reported an error. The provider did not give any information about the error.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IUnknown::QueryInterface returned 0x80004005: The provider did not give any information about the error.].

In case if anyone has a solution to it, please let me know.

View 3 Replies View Related

The Request Failed With HTTP Status 400: Bad Request. (Microsoft.SqlServer.Management.UI.RSClient)

Feb 23, 2008

I get this error message when I try to connect to Reporting Services via the Management Studio.

I can see my machine listed in the Server Name > Browse For More > Local Servers dialogue. But no luck,

Ive tried:

Servername: localhost
Servername: DED1774 (the machine name)
Servername: localhost/reportserver
Servername: DED1774/reportserver
Servername: http://ded1774/reportserver (from the rsreportserver.config file

<UrlRoot>http://ded1774/reportserver</UrlRoot>)



I've Googled the error message and found postings for solutions, but none of these helped. Can anyone suggest some simple steps I can take to try to find the issue and get the connection working?

Thanks

View 3 Replies View Related

Error With My Request Maybe OWC...

Jun 4, 2007

Hi, (sorry for my english...)I have a probelm to build my Pivot table.Indeed, The goal is just to see an example of Table Pivot with our Database...For that, I use this link : http://www.csharphelp.com/archives4/archive623.htmlI try to adapt the code but some problems...I use visual developper, and i have installed OWC11 & .NET framework 2.0.using System;using System.Data;using System.Configuration;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls;using Microsoft.Office.Interop.Owc11;public partial class _Default : System.Web.UI.Page{private void Page_Load(object sender, System.EventArgs e){//determine whether or not the browser supports OWCif(Request.Browser.ActiveXControls){Response.Write("<OBJECT id='pTable' style='Z-INDEX: 109; LEFT: 8px; WIDTH:502px; POSITION: absolute; TOP: 8px; HEIGHT: 217px' height='217' width='502'classid='clsid:0002E55A-0000-0000-C000-000000000046'VIEWASTEXT></OBJECT>");//cause the object to load data on the clientResponse.Write(@"<script>document.all.pTable.ConnectionString ='" + ConfigurationManager.ConnectionStrings["TimeTrackingDB"] + "'</script>");Response.Write("<script>document.all.pTable.ResourceID = 'RESOURCE'</script>");PivotTableClass PTClass = new PivotTableClass();PTClass.ConnectionString = ConfigurationManager.ConnectionStrings["TimeTrackingDB"].ToString();PTClass.DataMember = "";PivotView pview = PTClass.ActiveView;Response.Write(pview.FieldSets.Count);}}}When i'm lauching there is an error : HRESULT E_FAIL http://fists148.free.fr/Error.JPGIf i put the last lines in commentary, public partial class _Default : System.Web.UI.Page{private void Page_Load(object sender, System.EventArgs e){//determine whether or not the browser supports OWCif(Request.Browser.ActiveXControls){Response.Write("<OBJECT id='pTable' style='Z-INDEX: 109; LEFT: 8px; WIDTH:502px; POSITION: absolute; TOP: 8px; HEIGHT: 217px' height='217' width='502'classid='clsid:0002E55A-0000-0000-C000-000000000046'VIEWASTEXT></OBJECT>");//cause the object to load data on the clientResponse.Write(@"<script>document.all.pTable.ConnectionString ='" + ConfigurationManager.ConnectionStrings["TimeTrackingDB"] + "'</script>");Response.Write("<script>document.all.pTable.ResourceID = 'RESOURCE'</script>");}}}The component is loading but it seems to be an issue with the connection database...In my web.config, I Have this : <connectionStrings><add name="TimeTrackingDB" connectionString="Data Source=PORT06139DEV_2000;Initial Catalog=TimeTracking;Persist Security Info=True;User ID=user_TTT;Password=user_TTT;pooling=false"/></connectionStrings>Error connection (http://fists148.free.fr/OWCscreen.JPG)If you have any idea, i take it...I'm deseperate :eek: Thanks By advance

View 6 Replies View Related

Request Help For Debugging A SQL Error

Jun 24, 2007

The dynamic SQL at the buttom causes a error: 
Msg 402, Level 16, State 1, Line 9
The data types ntext and nvarchar are incompatible in the equal to operator.
 
I think it is due to the one of the where conditions [URL] = @old_URL ,both are set to NULL(@URL=NULL, @old_URL=NULL).
How do I make changes to the SQL statement to compare the conditions where NULL comparsion is inevitable.
 exec sp_executesql N'UPDATE [Announcement] SET [Atype] = @Atype, [Title] = @Title, [Content] = @Content,  [URL] = @URL WHERE [AnnouncementID] = @old_AnnouncementID AND [Atype] = @old_Atype AND [Title] = @old_Title AND [Content] = @old_Content  AND [URL] = @old_URL',N'@Atype nvarchar(3),@Title nvarchar(3),@Content nvarchar(41),@URL nvarchar(4000),@old_AnnouncementID decimal(1,0),@old_Atype nvarchar(3),@old_Title nvarchar(3),@old_Content nvarchar(41),@old_URL nvarchar(4000)',@Atype=N'CMC',@Title=N'aaa',@Content=N'asdfg',@URL=NULL,@old_AnnouncementID=6,@old_Atype=N'CMC',@old_Title=N'aaa',@old_Content=N'asdfg',@old_URL=NULL 
Any help would be apprecaied,
Ricky.

View 4 Replies View Related

[Help Request]Editor Error

Mar 28, 2007

http://omni.game-host.org/1.jpg

http://omni.game-host.org/2.jpg

http://omni.game-host.org/3.jpg

http://omni.game-host.org/4.jpg

View 5 Replies View Related

The Request Failed With The Error Message

Aug 27, 2007



I have SSRS installed on a web server and points to another SQL Server with the ReportServer database. Every now and then I would get this error message on Report Manger:

Client found response content type of '', but expected 'text/xml'. The request failed with an empty response.


Here is a trace from Stack Trace from ReportServerWebApp log file:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2047.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesLogFilesReportServerWebApp__08_27_2007_00_09_07.log</Path>
<SystemName>WATCOMWEB</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!6!8/27/2007-00:09:10:: e ERROR: Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
w3wp!ui!6!8/27/2007-00:09:10:: e ERROR: HTTP status code --> 500
-------Details--------
System.InvalidOperationException: Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!6!8/27/2007-00:09:13:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)


Other times I would get this error:
The request failed with the error message:
--
<html><head><title>Object moved</title></head><body> <h2>Object moved to <a href="/insightrptserver/logon.aspx?ReturnUrl=%2finsightrptserver%2fReportExe
cution2005.asmx">here</a>.</h2>
</body></html>

Stack Trace from ReportServerWebApp log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2047.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesLogFilesReportServerWebApp__08_26_2007_22_03_51.log</Path>
<SystemName>WATCOMWEB</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!6!8/26/2007-22:07:35:: Unhandled exception: System.Net.WebException: The request failed with the error message:
--
<html><head><title>Object moved</title></head><body>
<h2>Object moved to <a href="/insightrptserver/logon.aspx?ReturnUrl=%2finsightrptserver%2fReportExecution2005.asmx">here</a>.</h2>
</body></html>
--.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.Execution.ReportExecutionService.GetExecutionInfo()
at Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.GetExecutionInfo()
at Microsoft.Reporting.WebForms.ServerReport.GetExecutionInfo()
at Microsoft.Reporting.WebForms.ServerReport.SetExecutionId(String executionId, Boolean fullReportLoad)
at Microsoft.Reporting.WebForms.ServerReport.LoadFromUrlQuery(NameValueCollection requestParameters, Boolean fullReportLoad)
at Microsoft.Reporting.WebForms.ReportDataOperation..ctor()
at Microsoft.Reporting.WebForms.HttpHandler.GetHandler()
at Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
w3wp!ui!5!8/26/2007-22:07:48:: Unhandled exception: System.Net.WebException: The request failed with the error message:
--
<html><head><title>Object moved</title></head><body>
<h2>Object moved to <a href="/insightrptserver/logon.aspx?ReturnUrl=%2finsightrptserver%2fReportExecution2005.asmx">here</a>.</h2>
</body></html>
--.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.Execution.ReportExecutionService.GetRenderResource(String Format, String DeviceInfo, String& MimeType)
at Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.GetRenderResource(String Format, String DeviceInfo, String& MimeType)
at Microsoft.Reporting.WebForms.ServerReport.GetRenderResource(String format, String streamId, String& mimeType)
at Microsoft.Reporting.WebForms.ServerReportControlSource.GetRendererImage(String streamID, String& mimeType)
at Microsoft.Reporting.WebForms.ReportImageOperation.GetRendererImage(String resourceID, HttpResponse response)
at Microsoft.Reporting.WebForms.ReportImageOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response)
at Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
w3wp!ui!7!8/26/2007-22:08:22:: e ERROR: Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
w3wp!ui!7!8/26/2007-22:08:22:: e ERROR: HTTP status code --> 500
-------Details--------
System.InvalidOperationException: Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!7!8/26/2007-22:08:22:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)

Does any know what causes these errors. They don't appear very often, but often enought for the users to complain.

-waslam

View 4 Replies View Related

Table And Column Request As Variables Error.

Jul 20, 2005

I am trying to run a query where my Table and my request are variables(Will be used in Stored Procedure)Declare @EmailVARCHAR(100)Declare @TableVARCHAR(50)Declare @Count VARCHAR(8)DECLARE @cmd VARCHAR(500)set @Table = 'tblManager'set @Email = 'cauer@tampabay.rr.com'Set @cmd = 'Select count(*) as Count from ' + @Table + ' WHERE Email= ' + @Emailexec(@cmd)The error I get isServer: Msg 207, Level 16, State 3, Line 7Invalid column name 'cauer@tampabay.rr.com'.I have worked on this for a while, any help would be greatlyappreciated.Chris Auer

View 2 Replies View Related

Server Error In '/Reports' Application. Request Is Not Available In This Context

Jan 23, 2008

Hi, i am using Vista and iis6. Evertything seems to be configured ok, but when i try to open this url: http://localhost/Reports/
i get the following error:


Server Error in '/Reports' Application.


Request is not available in this context
this error is when Report directory is set for "DefaultAppPool",
but in "ClassicAppPool" i get another error:












Error























The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.



Home

- Could anybody help plz?

View 1 Replies View Related

Error: 17310: User Request Generated A Fatal Exception (AND I KNOW WHY)

Nov 15, 2007

Hello,

Just yesterday I implemented SqlCacheDependencies on my ASP.NET 2.0 web site for SQL Server 2005. My SQL Server 2005 database is in mode 90, mirrored with a second database server. Now I am getting Error 17310 while running very simple statements, but only on a specific table.

We have a table called "tblSchools" which, due to negligence and incompetence, has a maximum size of over 8,000. I plan on fixing that eventually, by splitting all the long varchar(2048) fields off into other tables.

I wanted to use SqlCacheDependencies on this table, for every single column. So I created a DateTime column called LastChanged and created a trigger. I am using LastChanged as a DateTime type instead of a TimeStamp/RowVersion type because I thought it would be more useful.

Here are the changes made:
---------------------------

-- Adding the column...
ALTER TABLE tblSchools
ADD
LastChanged DateTime Null
GO

-- The program uses this stored procedure to watch the "LastChanged" column.
CREATE PROCEDURE [apCacheWatchSchool]
@SchoolID int
AS
select LastChanged from dbo.tblSchools where SchoolID = @SchoolID
GO

-- Any updates on the table cause the LastChanged column to be updated with getdate()
CREATE TRIGGER [UpdateLastChanged_TS]
ON [dbo].[tblSchools]
AFTER INSERT,UPDATE
AS
BEGIN
SET NOCOUNT ON;
update [dbo].[tblSchools]
set LastChanged = getdate()
where SchoolID in (select SchoolID from inserted);
END
GO

---------------------------

After adding this column and the trigger and s-proc, any update to any row in tblSchools fails with error 17310. It CANNOT set LastChanged to anything. It has to remain NULL. I was able to perform the following operation (as long as the tblSchools.LastChanged updating trigger [UpdateLastChanged_TS] was disabled): "update tblSchools set SchoolName = 'ZZZZ' + SchoolName where SchoolID = 185" -- so, it's not some kind of row length limit. I think it's a limit on # of columns that can be dealt with. I don't really know.

I don't know where the problem is occurring. I am just telling you why. I got around the problem (temporarily) by simply having the trigger update a DateTime column in another table, and having the SqlCacheDependency watch that column in the other table. No biggie.

As for moving some of the enormous varchar columns off of tblSchools... I don't really care enough. I guess that's why it's been like this for so long.

So, my problem is fixed, I just wanted to submit this bug report so you can at least fail gracefully in the next version of SQL Server.

I have the log/txt/mdmp files available, and can provide them upon request; they're too big for this form, sorry. Please contact me at plushpuffin AT wwddfd.com if you have any questions.

View 1 Replies View Related

A Transport-level Error Has Occurred When Sending The Request To The Server.

Sep 27, 2007

Hi,
A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)
I am using a direct connection from my Gridview to perform a huge database search. the stored procedure will take 10- 60 seconds to execute the query.

What the problem i am facing is when the sp takes long time (more than 1 minutes), then when i try any other operation like calling another sp frm another page, i am getting the above specified error.

Anybody can tell why is it happening?

here my code snippet goes


<asp:GridView ID="searchGV" runat="server" AllowPaging="True" AllowSorting="True"

BorderColor="#999999" BorderStyle="None" CellPadding="3" Width="100%" AutoGenerateColumns="False" DataSourceID="searchObj" DataKeyNames="Recordnumber" OnDataBound="searchGV_DataBound" OnPageIndexChanged="searchGV_PageIndexChanged">

<RowStyle CssClass="gridRow" />

<PagerStyle HorizontalAlign="Center" BackColor="#999999" ForeColor="Black" />

<HeaderStyle CssClass="gridHeader" />

<AlternatingRowStyle CssClass="gridAlternateRow" />

<Columns>

<asp:TemplateField HeaderText="All">

<HeaderTemplate>

<asp:CheckBox ID="chkid" AutoPostBack="true" OnCheckedChanged ="OnCheckChangedEvent" runat="server" />

</HeaderTemplate>

<EditItemTemplate>

<asp:CheckBox ID="chkSelect" runat="server" />

</EditItemTemplate>

<ItemTemplate>

<asp:CheckBox ID="chkSelect" runat="server"/>

</ItemTemplate>

<ControlStyle Height="18px" Width="15px" />

<ItemStyle Width="5px" />

</asp:TemplateField>

<asp:BoundField DataField="Title" HeaderText="Title" SortExpression="Title">

<ItemStyle Width="150px" />

</asp:BoundField>

<asp:BoundField DataField="Artist" HeaderText="Artist(s)" SortExpression="Artist"/>

<asp:BoundField DataField="Album" HeaderText="Album" SortExpression="Album"/>

<asp:BoundField DataField="Writer" HeaderText="Writer(s)" SortExpression="Writer" ><ItemStyle Width="150px" /></asp:BoundField>

<asp:BoundField DataField="ISRC" HeaderText="ISRC" SortExpression="ISRC" />

<asp:BoundField DataField="UPC" HeaderText="UPC" SortExpression="UPC"/>

<asp:BoundField DataField="PLineLabel" HeaderText="P-Line Label" SortExpression="PLineLabel" ><ItemStyle Width="100px" /></asp:BoundField>

<asp:BoundField DataField="DistLabel" HeaderText="Distribution Label" SortExpression="DistLabel" >

<ItemStyle Width="100px" />

</asp:BoundField>

<asp:BoundField DataField="PublishInfo" HeaderText="Publisher(s)" SortExpression="PublishInfo" />

<asp:BoundField DataField="Recordnumber" HeaderText="Record Number" SortExpression="Recordnumber" />

<%-- <asp:BoundField DataField="UID" HeaderText="UID" Visible="false" />--%>

</Columns>

</asp:GridView>


with adapter

<asp:SqlDataSource ID="searchObj" runat="server" SelectCommand="gsp_titleSearchResult" SelectCommandType="StoredProcedure" ConnectionString="<%$ ConnectionStrings:ConnStr %>">

<SelectParameters>

<asp:ControlParameter ControlID="HuserID" PropertyName="Value" Name="Userid" Type="String" Size="50" DefaultValue="" />

<asp:ControlParameter ControlID="Htitle" PropertyName="Value" Name="title" Type="String" Size="50" DefaultValue=" " />

<asp:ControlParameter ControlID="Hartist" PropertyName="Value" Name="artist" Type="String" Size="50" DefaultValue=" " />

<asp:ControlParameter ControlID="Halbum" PropertyName="Value" Name="album" Type="String" Size="50" DefaultValue=" " />

<asp:ControlParameter ControlID="Hwriter" PropertyName="Value" Name="writer" Type="String" Size="50" DefaultValue=" " />

<asp:ControlParameter ControlID="Hisrc" PropertyName="Value" Name="isrc" Type="String" Size="50" DefaultValue=" " />

<asp:ControlParameter ControlID="Hupc" PropertyName="Value" Name="upc" Type="String" Size="50" DefaultValue=" " />

<asp:ControlParameter ControlID="Hpline" PropertyName="Value" Name="pline" Type="String" Size="50" DefaultValue=" " />

<asp:ControlParameter ControlID="Hdist" PropertyName="Value" Name="distlabel" Type="String" Size="50" DefaultValue=" " />

<asp:ControlParameter ControlID="Hpublish" PropertyName="Value" Name="publisher" Type="String" Size="50" DefaultValue=" " />

<asp:ControlParameter ControlID="ReleaseID" PropertyName="Value" Name="Releaseid" Type="Int32" Size="50" DefaultValue="0" />

<asp:ControlParameter ControlID="RecordLabelID" PropertyName="Value" Name="recordlabelid" Type="Int32" Size="50" DefaultValue="0" />

<asp:ControlParameter ControlID="PublisherID" PropertyName="Value" Name="Publisherid" Type="Int32" Size="50" DefaultValue="0" />

<asp:ControlParameter ControlID="ArtistID" PropertyName="Value" Name="Artistid" Type="Int32" Size="50" DefaultValue="0" />

</SelectParameters>

</asp:SqlDataSource>



Advance thanks

Anvar Sadath

View 1 Replies View Related

A Transport-level Error Has Occurred When Sending The Request To The Server

Apr 7, 2006

Hi all,



I am new to SQL 2005. I have one issue and it is as follows:

I write a simple query and run it; it works fine.

Now I break the network connection and run the query; in this case it runs fine.

But when I reconnect the network and run the query, then I get an error as follows:

"A transport-level error has occurred when sending the request to the server. (provider: Named Pipes Provider, error: 0 - An unexpected network error occurred.) "

Every thing is local here. So how the network issue comes here?







View 14 Replies View Related

A Transport-level Error Has Occurred When Sending The Request To The Server

Oct 16, 2006

I've tried to search on the web for a solution for this error but i didn't find any working solutions for this problem. We have 2 servers. The first one is the server we use to develop our ASP.NET 2 application. On this server we don't have this error. On the other server (use by our client) we have this error sometime and i don't know why. Both servers have the same configuration and both application have the same web.config file.

I've tried to add a try-catch and retry the query when the error occured. This seems to be working but we don't want to have to change all our connections and since we don't have this problem on the other server we want to find the source of the problem.

Any idea ?

Thanks !

View 1 Replies View Related

SQL 2012 :: Error 1222 - Lock Request Time Out Period Exceeded

Mar 21, 2013

What is this? How do I fix it? I get a ton of these and it slows down the server for 5 minutes.

An error occurred in Service Broker internal activation while trying to scan the user queue 'msdb.dbo.ExternalMailQueue' for its status. Error: 1222, State: 51. Lock request time out period exceeded. This is an informational message only. No user action is required.

View 1 Replies View Related

Setup And Upgrade :: Error (Request Failed) When Installing Express R2 On Windows 7 PC?

May 8, 2015

No logs created, this is all I have:
 
Unhandled Exception: System.Security.SecruityException: Request failed.
         at Microsoft.SqlServer.Chainer.Setup.Setup.DebugBreak()
         at Microsoft.SqlServer.Chainer.Setup.Setup.Main()

Then the Managed SQL Server Installer box pops up with Managed SQL Server Installer has stopped working.

View 11 Replies View Related

Error 1053 - The Service Did Not Respond To The Start Or Control Request In A Timely Fashion

Aug 6, 2015

"Windows could not start the SQL Server (RETAIL) service on local computer."

"Error 1053: The service did not respond to the start or control request in a timely fashion."

I am trying to start my SQL Server service and I get the above error. I am using Windows 7 32 bit. SQL 2008 R2 32bit. SQL has ran successfully for 2 years on this machine until a power outage the other night. Now I have this happening on two computers.

I have read every event viewer message up and down and searched Google for hours trying to find a solution. I have done so many things from changing dll's to reinstalling sql 2008 to trying sql 2012.

I uninstalled SQL2008 and installed SQL2012 and it had the exact same error message. It wont start that one process. I have read this forum and I see many instances of this issue being reported but none of them have been recent. I attempted to do everything the previous posts said to try and nothing has worked. I have tried to roll back using windows restore point, I have tried to change the servicespipetimeline registry edit in the HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControl. I have changed permissions.

View 0 Replies View Related

Reporting Services :: Error On Deploying SSRS Map Report - Maximum Request Length Exceeded

Jul 19, 2015

I am trying to deploy a shape file map of the world with 100 random data points from my dataset but get this error: "exception running the extensions specified in the config file. ---> Maximum request length exceeded". I can preview this fine in SSDT. I have read various solutions which involve editing the config file but I don't have permissions to get to these files. Is there any way to amend the maximum length either through SSMS or SSDT? If not how can I make my map size small enough to deploy? It is a very simple shape file with no colours etc and I am passing random 100 data points to it from my dataset.

View 4 Replies View Related

Report Viewer In ASPX Page- Getting An Error The Request Failed With HTTP Status 401: Unauthorized

Nov 2, 2006

I used the following reference code while creating this simple ASPX page with reportviewer control using VS 2005

http://www.tutorialsall.com/REPORTINGSVCS/WebFormsReportViewer-ReportServerCredentials/

ReportViewer is having following properties

ProcessingMode = "Remote",

ReportServerUrl = "/foldername/myreport

ReportPath = "http://report.mydomain.com/reports"

Even after using admin user we got the same problem

Please help









View 9 Replies View Related

Replication Error With Sqlserver Mobile:A Request To Send Data To The Computer Running IIS Is Failed, See Hrresult

Jan 27, 2006

I have smilar kind of an issue with replication. I had sucessfully done replication with Sqlce2.0 on sql server 2000. In development machine I had VS 2003, sqlce development tools.

Now I use the same code done in VS 2003 into VS2005, it sucessfully converted the code.

In server machine (win 2003) I installed sql server 2000, sql server 2000 service pack 4, SP4 merge replication components, sql server 2005 mobile server tools and .Net framework 2.0. Created pubication sucessfuly. In this machine I configured IIS as per the web synchronization wizard. Gave anyonymous permissions. Virual direcory is created sucessfully. I tested the server agent in IE http://myservername/aliasname/sqlcesa30.dll.

 SQL Server Mobile Server Agent 3.0 is shown

My application opened successfuly in windows mobile 5.0 Pocket PC emulator. When try to sync its dislays error "A request to send data to the computer running IIS is failed, see Hrresult"

No firewall in both development and server machines.

The same code works if its sqlce20 perfectly with vs2003 code. Not in this

Can anyone tell me whats wrong in this?

Regards

Arif

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved