Error 0xc0202009 For Importing Access97 Into Sql
Mar 8, 2006
We have an Access97 database with 122 tables. I try to use import and export wizard to import the data from access into SQL 2005 database. I find an interesting problem. When select all tables, the wizard give following errors:
Pre-execute (Error)
Messages
Error 0xc0202009: {DBD1EAB5-7865-4B89-A7BB-DDC8507D8119}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 64 - PlanClasses" (5206) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard)
But if I divide importing as 2 steps:
1. import all tables before PlanClasses, it works.
2. import all tables after PlanClasses including PlanClasses, it works.
If I just import PlanClasses itself, it works, but I can not import all tables at once. Interesting thing is if I just unselect PlanClasses, it will have same error at the class right after PlanClasses. Is there size limitation when doing import at once?
View 5 Replies
ADVERTISEMENT
Feb 21, 2007
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
View 1 Replies
View Related
Mar 22, 2007
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
View 4 Replies
View Related
Jan 8, 2004
Greetings!
I recently rewrote an old ACCESS 97 application to work with MSSQL 7.
The program works fine until I use a form whiche opens several linked tables at the same time. When closing the Form I get (At unpredictable moments) an ODBC SQL SERVER DRIVER update failure error message.
All rights are set on the tables for Public and even then i keep getting this error at very odd moments. I also had a look in Access at the ODBC refresh rate which is set at 10sec , OLEDB refreshrate 10 sec, and refresh is set at 5sec.
I tried different combinations of timeout settings and even renewing the MDAC to version 2.7.
Nothing helps.
Can anyone give me a tip as to look for the possible source of the error and how to fix it?
Thanks!
Vincent JS
View 2 Replies
View Related
Nov 27, 2007
HI I'm still in the middle of this 2000 to 2005 64 bit migration!! I have managed to create an oledb connection to my informix db. Within the data flow I wanted to create a simple data pump from my infdormix db to S2K5 db.
Now in the OLEDB source I have done a select froma table to which I can view. I also set the always use default code page to true.
On the error box I get
[OLE DB Source [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error 1 Validation error. Reason code: OLE DB Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. Cerptransfer.dtsx 0 0
Also when I try to execute it I get
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Reason code [OLE DB Source [1]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Reason code [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
Error at Reason code [DTS.Pipeline]: One or more component failed validation.
Error at Reason code: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
Can anyone help as i'm dead in the water now.
many Thanks
robert
View 11 Replies
View Related
Nov 16, 2007
When I attempt to import a table from another SQL 2005 server to mine, I recieve the following error:
- Pre-execute (Error)
MessagesError 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
(SQL Server Import and Export Wizard)
Error 0xc0202025: Data Flow Task: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Destination - vwQualitySurvey" (226) failed the pre-execute phase and returned error code 0xC0202025.
(SQL Server Import and Export Wizard)
Is there anything that I can do to try and rectify this?
View 2 Replies
View Related
Dec 15, 2005
Hi,
I have developed a .dtsx package than runs normally from my computer. When I import it on the server and assign it to a job it always fails.
I tried also to run it directly from the server (remote desktop) and also faild. I exported the dtsx file on server and refresh the db connections and after that workd fine from the server.
Another work-around was to use windows authentication. Then runs normally from the server.
It seems that connection password is lost when importing the report on server. (The import is done in MSDB not in the filesystem)
But I can not design all the jobs on the server (work-around A) or use windows authentication (work-around B)
What is the problem and what can I do?
I have also played around with "save sensitive information" but with no results.
Thanks
View 10 Replies
View Related
Jul 16, 2007
I have an SSIS project that is deployed to a sql server.
The setup of the project is a parent dtsx package, and many child packages.
The parent executes each of the chid packages.
If I run the parent from BIDS, calling the children that are on the SQL Server, it works fine.
If I execute it from SQL Management Console running on my laptop, connected to the SQL Server, It works.
If I remote into the SQL Server and run it from SQL Agent or SQL Management Console, the job fails with the error:
Error 0xC0202009 while preparing to load the package. SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
for each of the children.
This has quite suddenly stopped working, and I cannot figure out why it will work being executed from my laptop, but not on the server.
Any ideas?
Thanks
BobP
View 9 Replies
View Related
Jul 30, 2007
I get 2 errors when I run a job in sql server agent 2005 0xc0202009 and 0x80040E2. I cannot see why I am getting these errors, when I run the job with dtexec it is successful. Also when I run it in the debugger or run the executeable it is successful. But when I try to run it with the agent it fails. Any Ideas would be greatly appriciated.
thank you
Joey Kushinski
View 11 Replies
View Related
Dec 12, 2007
I have developed a simple SSIS Package that will export data from an AS400 iSeries server to a flat file. When I try to debug the package I receive this error. I have tried to change the security level of the package to EncryptAllWithPassword and specified a password. For some reason the password for the connection to the AS400 is not being retained. when I enter the password the following error disappears when I try to debug the package the error returns.
Does anyone know how to correct this? Thanks in advance for your help.
Things to also know:
I am using a Native OLE DBIBM AS400 OLE DB Provider w/user name and password (Allow saving password checked) Test Connection succeeded.
I am using a OLE DB Source to extract the data with Data Access Mode of Table or View. When I try to select a table I am prompted from the AS400 to enter password. Then I can see the tables.
I can select the columns I need and click OK to save.
Error 1 Validation error. Data Flow Task: OLE DB Source [39]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SERVERNAME.USERNAME" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. SSIAS400DataExport.dtsx 0 0
View 7 Replies
View Related
Jan 3, 2007
Hello,
I have a Data Flow Task within an SSIS package where data is pulled from a Fixed Width flat file, goes through a conditional split, and sends data either to a SQL Server 2000 table, or to another fixed width flat file.
The first condition in the conditional split checks for the following; [Column 44] + [Column 45] != "D1" . If this is true, then those rows go to a SQL Server 2000 table destination. If false, then the rows go to another flat file.
The SQL Server 2000 table has a unique nonclustered index with ignore_dup_key. From what I can tell, it looks like the step fails when a duplicate record is encountered. However, it appears that the unique records still go into the table.
When I check the 'Progress' tab of the package, the following steps seem to be suspect;
[Populate Staging [786]] Information: The final commit for the data insertion has started.
[Populate Staging [786]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "Duplicate key was ignored.".
[Populate Staging [786]] Information: The final commit for the data insertion has ended.
[DTS.Pipeline] Error: The ProcessInput method on component "Populate Staging" (786) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[DTS.Pipeline] Information: Post Execute phase is beginning.
..and..
Task 2 Isolate Suspect Records and Insert Known Good Records failed
In one case, the source flat file had 74,101 rows. Each row tested true in the conditional split, and all but one row made it into the SQL Server table. The step failed, and the 'Progess' section containted the entries mentioned above.
The Connection Manager for the SQL Server table destination uses the Native OLE DBMicrosoft OLE DB Provider for SQL Server.
Is the 'error' that occurs when a duplicate row is encountered causing the Data Flow task to fail, or could it be something else?
Thank you for your help. Please let me know if you need more information.
CSDunn
View 2 Replies
View Related
Aug 11, 2005
I have a SQL Server Agent job with a step to execute an SSIS package. The package has as one of it's connection managers the Connection Manager For Excel Files. When I run the job it fails every time. I have implemented logging and in the OnError event it states "The AcquireConnection method call to the connection manager "LOBMappingExcel" failed with error code 0xC0202009".
View 9 Replies
View Related
Dec 7, 2005
I've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
View 73 Replies
View Related
Feb 17, 2006
The package runs fine if I run it by itself. Unfortunately we want to call it from another package and when we do so it fails everytime with the following error; "AcquireConnection method call to the connection manager "BPCSF" failed with error code 0xC0202009." This package is calling an AS400 and pulling data from it into a staging environment. The task that is failing is 4th task on the list and is the 3rd task to call the AS400 environment. If I need to provide more information I would be happy to do so. Any help would be greatly appreciated. Thanks!
-Krusty
View 1 Replies
View Related
Oct 9, 2007
I can run this package in Studio and it works fine, but when I run it from SQL Server Agent, it throws this error. Does anybody know what would cause this problem. This appears to occur during validation for the package because none of the data flow steps run. The connection being used is the same connection used in all of the data flows. If validation is done in order, then prior steps using the same connection are passing validation.
Thanks,
Steve
View 5 Replies
View Related
Aug 20, 2007
Error at Text Inbound Task [SQL Server Destination [9]]: The AcquireConnection method call to the connection manager "Server.Northwind" failed with error code 0xC0202009.
Error at Text Inbound Task [DTS.Pipeline]: component "SQL Server Destination" (9) failed validation and returned error code 0xC020801C.
Please keep me posted with alternate work around(s) /solution(s).
View 1 Replies
View Related
Dec 27, 2007
Hi,
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Appreciate your time and patience !!
Thanks
View 3 Replies
View Related
Apr 27, 2007
Hello everyone,
I am struggling with this error and it's starting to get to me!
I have setup a simple project with just a data flow task. In this task, it retrieves a simple record "Select * From Table1 WhereId=1". The connection is an OLE Db connection using Advantage Oledb Provider (a provider for accessing dBase). It is accessing a Novell network drive. I have setup the package to both "EncryptSensitiveWithPassword" and "DontSaveSensitive". Both times i have received this error.
The funny thing is, when I set the package to "EncryptSensitiveWithPassword" and I setup a job to run the package, it never asks me for the password even though I set one up! I have a previous package (few months ago I made) that accessed the same database on the same Network drive and it works! It also asks me for a password when I try to modify or run the package (b/c I set it to "EncryptW/Password").
Can anyone give any light into this problem?
Thansk for all your support,
Adrian
View 1 Replies
View Related
Mar 24, 2008
I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database.
I am getting following error while I execute it through BI studio's execute button.
Please help.
- Sachin
View 2 Replies
View Related
Mar 11, 2008
I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid
View 27 Replies
View Related
May 30, 2001
I have migrated a database from Access to SQL. Promlem is that I cannot edit the records in the now
linked tables. We are still using the Access front end. Why can't we edit the records?
Thanks in advance.
View 7 Replies
View Related
Dec 18, 2000
Hi. Silly question time please.
I'm a newbie when it comes to SQL7.
I'm trying to connect via Access 97 VBA to a SQL server table. I can't seem to get it working at a basic level.
Has anyone got the basic syntax or sample piece of VBA code to connect to a SQL server. I've been searching everywhere to no avail so far.
Dave.
View 4 Replies
View Related
Oct 13, 2000
If i create ODBC links for a SQL server db in Access and make the file read-only, i find that 2 people cannot open teh file simultaneously...
any ideas why and any suggestions how to over come thi problem...any solutions will be highly appreciated
regards,
resh
View 2 Replies
View Related
Feb 14, 2005
I have an Access 97 database that I would like to "mirror" in my SQL server 2000 database.
Basically I would like SQL server to keep a current copy of an Access 97 database table which exists on remote machine on our network. Any time there is a change made to the Access table, I would like the SQL server to be updated automatically.
Is this something that is possible to do with replication/synchronization, or do I have to push the data up with another app?
Thanks
View 5 Replies
View Related
Mar 9, 2000
The website i'm building is using an access97 database. Actually the database isn't very big but i hope it will become. So i would like to convert it to SQL 7.0 which seems to be more powerfull. Is there a software which can do it automatically? What are the modifications needed by ODBC ?
Thanks !
View 1 Replies
View Related
Mar 12, 1999
When I try to link tables from Access97 to SQL7, all the columns have #deleted# in them. Does any one know why this is?
Thanks
Phil
View 3 Replies
View Related
May 11, 1999
I am trying to link a table from a MS SQL database into access97 thru ODBC. When I do this, I get the message "Can't define field more than once." When I look at the table in SQL, there are no duplicate field names, however, when I bring the table in to do a Crystal Report, I see there are 2 fields that have duplicate field names 6 times. (Evidently Crystal doesn't care about this as Access does.) Any clues on what is happening?
View 2 Replies
View Related
Jan 11, 2000
I would like to create a MSAccess97 front end for some SQL7 data.
I created an odbc source system dsn for the server holding the SQL7 data.
When I try to add a table to my Access97 database by linking it to a SQL7 table, the only choices presented me are tables in the default database for SQL7 on my server. How do I link to tables in another database on that server? Thanks.
View 1 Replies
View Related
Mar 17, 2000
When Access date/time data is transformed to SQL7, it seems to work fine as long as the data contains date information. But, if the data is time only, there is the 2-day diff. coming out of Access.
For date/time data in Access, day 0 is 12/30/1899--for SQL7 it is 1/1/1900.
So, it appears that DTS first converts Access date/time data to a date formatted string and then sends to SQL. This will only be a problem for times....8:00 AM is stored to SQL as 8:00 AM on 12/30/1899, not 1/1/1900. If I try to calculate hours or minutes from midnight (date/time 0) I get a negative number.
Has anyone else encountered this? I guess my choice is to modify DTS to correct for the dates or to run an update once the data is moved.
View 1 Replies
View Related
Sep 28, 1998
I`m trying out SQLServer7, have installed it on my workstation, have been able to open access97 and link to sql7 tables I created. Want another user to use access97 to set up her own database and link to my sql7 tables. Do I need to install anything from the sql7 beta disk on her desktop? Right now she can`t link a sql7 table to her access97 db. Thanks.
View 1 Replies
View Related
Oct 3, 2002
Does Access2000 upsizing wizard support migration of tables to Sql 2000?
View 1 Replies
View Related
Jul 20, 2005
I have an application written in Access 97 that connects to a SQL2000backend. One field is a description field that is a data type NTEXT in theSQL database. In my access form, I can not enter more than 255 characters.Before I converted the backend to SQL, the description field was a memofield in Access.What do I need to do to make it so I can enter more text into this field?
View 1 Replies
View Related
Apr 18, 2008
hi all,
I am using SSIS package to transfer data from 4 tables of one Server to another server(Using SQLConnection).
All works fine while runinng in Debug mode.
But while running the application(Which calls SSIS and creates Pacakage),it is creating only one package instead of creating 4 and resulting in error.
"Exception from Hresult:0xc0202009"
Please help me to solve this issue.
Thanks in advance,
Sangeet
View 8 Replies
View Related
