"Windows could not start the SQL Server (RETAIL) service on local computer."
"Error 1053: The service did not respond to the start or control request in a timely fashion."
I am trying to start my SQL Server service and I get the above error. I am using Windows 7 32 bit. SQL 2008 R2 32bit. SQL has ran successfully for 2 years on this machine until a power outage the other night. Now I have this happening on two computers.
I have read every event viewer message up and down and searched Google for hours trying to find a solution. I have done so many things from changing dll's to reinstalling sql 2008 to trying sql 2012.
I uninstalled SQL2008 and installed SQL2012 and it had the exact same error message. It wont start that one process. I have read this forum and I see many instances of this issue being reported but none of them have been recent. I attempted to do everything the previous posts said to try and nothing has worked. I have tried to roll back using windows restore point, I have tried to change the servicespipetimeline registry edit in the HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControl. I have changed permissions.
Running MS SQL 2005 SP1 on Windows 2003 Server SP1 (IA32). Upon rebooting, I get an error that this service failed to start, and when I attempt to start manually, I get the same error:
Could not start the SQL Server Integration Services service on the Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
after installing sp1 for sql server 2005 the sql server integration services did not start. and i can`t start them manually. the installation succeeded without problems (both sql server and sp1)
the only problem was with installing sql server 2005. in the sql server configurations manager the following protocols were disabled:
- named pipes
- tcp/ip
- via
- shared memory was enabled
is this a problem. because in the "how to verify installation of sql server" is written, that tcp/ip has to be enabled. however i can manually enable it.
i can`t start the sql server integration services manually. so what can i do? i also tried reinstall sql server but i do get the same error.
As part of Team Foundation Server the Integration Services are used. They are configured to start automatically but it doesn't. Status is "stopped". Trying to start the service manually fails too:
Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7000 Date: 07.11.2006 Time: 11:11:49 User: N/A Computer: SDOSCARBUILDSRV Description: The SQL Server Integration Services service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
It uses default LogOnAs NT AuthorityNetworkService. Any idea what might be wrong and what to do?
SQL Server Reporting Services 2005 Service would not Start on windows server 2003. Working great till yesterday and no changes were made to config file.
Here is the error in Event log
Event Type: Error Event Source: SQL Server Report Service Event Category: None Event ID: 0 Date: 12/13/2007 Time: 8:25:59 AM User: N/A Computer: XXXXXXXXXXX Description: Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information. at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime) at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args) at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Here is i found in log files ReportingServicesService!resourceutilities!4!12/13/2007-08:25:59:: i INFO: Running on 0 physical processors, 1 logical processors ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Exception caught loading and setting code permissions policy level: System.Security.XmlSyntaxException: Invalid syntax on line 158. at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index) at System.Security.Util.Parser.ParseContents() at System.Security.Util.Parser..ctor(Tokenizer t) at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type) at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type) at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy() ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Error Starting Service: System.Security.XmlSyntaxException: Invalid syntax on line 158. at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index) at System.Security.Util.Parser.ParseContents() at System.Security.Util.Parser..ctor(Tokenizer t) at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type) at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type) at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy() at Microsoft.ReportingServices.Library.ServiceController.StartService(Boolean firstStart)
A coworker of mine is experiencing some problems with SQL Server Integration Services (SSIS) and long running Web Service calls. Any feedback on the problem would be greatly appreciated.
The problem is as follow: He has a large SSIS-package that, among other things, contain a few Web Service Tasks. All of the tasks are executing as expected for small amounts of data. All the Web Service Methods have in common that they have a long running time. The running time depends on the amount of data.
During requests with large amount of data the Web Service task fails with the error message €œThe operation has times out€?, but on the server they see that the service call completes as expected (after quite some time, approx 200sec).
The Web Service tasks are using an €œHTTP Connection Manager€?, created in the SSIS package. The timeout-value is set to 300 sec (which is the largest value for the property). My coworker expected that this value was the same as setting the timeout value for a Web Service proxy object for any other project.
After testing the Web Service from a Console application, with 300 sec timeout, the app executed as expected with no timeout exception.
After doing some testing, he€™s quite sure that the SSIS task times out after 100 seconds, which is the default .NET 2.0 timeout value for a WS proxy, even though the timeout property in SSIS is set to 300 seconds.
As a work around he have created a console application that does the web service call, and then use the €œexecute process task€? in SSIS. This is off course a €œdirty€? hack, and he want€™s to use the €œHTTP Connection Manager€? task instead.
So the question is: Have anyone experienced this problem before? Is there a limitation on the HTTP Connection Manager task? Is the timeout value on the HTTP Connection Manager task the same as setting the timeout property on a WS proxy? Why isn€™t this €œtimeout€? value picked up my SSIS?
I have my Sql server 2005 running perfectly (until yesterday) on vista. But today when I tried to connect to the server I get error 3417 meaning my master database needs rebuilt or repaired.
I tried all sort of techniques I found on internet like checking if my data files in data dir are not compressed and for the SQL Server Servies it logs on local account with interact with desktop checkbox checked. But no luck.
I tried to use setup.exe in my installer CD to rebuild master database but it seems the cmd doing nothing. To rebuild, I use the following command “start /wait setup.exe /qn INSTANCENAME=<instance> REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=<New SA Password>�. This cmd runs but due to some reason my master db is not being repaired. Ideally, I should see recent date change for this file.
Please advice how can I connect back to my server again making sure my databases are not lost.
We have changed the Network Domain name of a SQL server and restarted before changing any of the settings in SQL server. When we now try to start the SQL server service manager we get the following error
Your SQL server is either corrupt or has been tampered with. Unknown package id please rerun setup
Any suggestions on how to get the SQL server back on line without having to take the server down and changing the Netowrk Domain Name back ??
Is there a trick to getting this installed correctly? Everything works great until it gets up to starting the service. Here is the complete section of my setup log file.
SQL 2005 Standard.
Machine : KINGSERVER550 Product : SQL Server Database Services Error : The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." -------------------------------------------------------------------------------- Machine : KINGSERVER550 Product : Microsoft SQL Server 2005 Product Version : 9.00.1399.06 Install : Failed Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_KINGSERVER550_SQL.log Last Action : InstallFinalize Error String : The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (1067) The process terminated unexpectedly. Error Number : 29503
I searched a previous thread dealing with this error, but seems like nobody has found a solution.
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
I am not able to start Integration services on my windows 2003 machine. I get the below error. The request failed or the service did not respond in a timely fashion. Consult the event log or application error log for details. I am a newbee for MS SQLSERVER. I did not see any errors in the event log. I checked the sqlserver log and found the below message. I am not sure if this could be related. The SQL network Interface library could not register service principal name (SPN) for the SQL service error: 0x2098. This machine is clustered and integration services seems to work without issues on the first node.
I am not able to start the "SQL Intigration services" service from the services control panel. The error message is: "Error:1053 The Service did not respond to the start or control request in a timely fashion"
And because of this i am not able to connect to Intigration Services from SQL Server Management Studio.
I have installed reporting services from SQL Express SP1 package. OS is Windows 2000 SP4. Just after installation "Reporting services" service has StartMode=Automatic and LogOnAS=LocalSystem as shown in SQL Server Configuration Manager. When system is rebooted reporting services state is Stopped and there is 2 errors in System log: 1. Timeout (30000 milliseconds) waiting for the SQL Server Reporting Services (REPS) service to connect. 2. The SQL Server Reporting Services (REPS) service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. If i select "start" from service's context menu then it starting normally and it's state becomes Running. What can i do to make reporting services starting automatically on system load?
I'm hoping someone has tried something similar before. I am trying to run an integration from a remote computer using a web service. I have set up the web service and the bog standard launch package routine works fine. What i'd like to be able to do is to launch a package and also specify any parameters associated with it. I have the following code which is identcal to the main launch sub with the exception of an extra argument (jagged array of varible name and value variablePair[4][2]). It also processes the variable array and sets them on the DTSPackage object.
[code] [WebMethod] public int LaunchSSISPackageWithVariables(string sourceType, string sourceLocation, string packageName, string[][] variableArray) { string packagePath; Package myPackage; Application integrationServices = new Application();
// Combine path and file name. packagePath = Path.Combine(sourceLocation, packageName);
switch (sourceType) { case "file": // Package is stored as a file. // Add extension if not present. if (String.IsNullOrEmpty(Path.GetExtension(packagePath))) { packagePath = String.Concat(packagePath, ".dtsx"); } if (File.Exists(packagePath)) { myPackage = integrationServices.LoadPackage(packagePath, null); } else { throw new ApplicationException("Invalid file location: " + packagePath); } break; case "sql": // Package is stored in MSDB. // Combine logical path and package name. //if (integrationServices.ExistsOnSqlServer(packagePath, ".", String.Empty, String.Empty)) if (integrationServices.ExistsOnSqlServer(packagePath, ".", "executeSSIS", "p4ssw0rd")) { //myPackage = integrationServices.LoadFromSqlServer(packageName, "(local)", String.Empty, String.Empty, null); myPackage = integrationServices.LoadFromSqlServer(packageName, "(local)", "executeSSIS", "p4ssw0rd", null); } else { throw new ApplicationException("Invalid package name or location: " + packagePath); } break; case "dts": // Package is managed by SSIS Package Store. // Default logical paths are File System and MSDB. if (integrationServices.ExistsOnDtsServer(packagePath, ".")) { myPackage = integrationServices.LoadFromDtsServer(packagePath, "localhost", null); } else { throw new ApplicationException("Invalid package name or location: " + packagePath); } break; default: throw new ApplicationException("Invalid sourceType argument: valid values are 'file', 'sql', and 'dts'."); }
//Variables var = myPackage.Variables; //foreach (string key in variablePairs.Keys) //{ // var[key].Value = variablePairs[key].ToString(); //}
Variables var = myPackage.Variables;
for (int i = 0; i < variableArray.Length; i++) { var[variableArray[0]].Value = variableArray[1].ToString(); }
return (Int32)myPackage.Execute(); } [/code]
For some reason the above code runs and passes back the value that it succeeded. Yet the package doesn't do what it should. Does anyone have any ideas as to why this might be the case or even a better way to pass the variables.
I have a table is SQL server database A that is my source.
I have another database B which is accessed via webservice call.(its a CRM server basically).
My intention is to transfer data from A to B while B is accessible only via web service. I need to Trasnfer the data from the source database A to the destination Database B by calling the webservice.
Is there a way where I can retrieve whole set of rows in source table in preexecute(), And transfer the data to Database destination B by calling the webservice?
The local sql server that was working fine earlier does not start now. I have already created tables and accessed them using stored procedures.
I get an error 1069: The service did not start due to logon problems. I have only changed my domain password. I do not remember what authentication I chose for log on.
Hello! I have the following problem. I developed CLR Stored Procedure "StartNotification" and deploy it on db. This sp calls external web service. Furthermore, this sp is called according with SQL Server Agent Job's schedule. On my PC SQL Server works under Local System account and this web service is called correctly (Executed as user: NT AUTHORITYSYSTEM). But on ther other server the following exception is raised during job running: Date 17.04.2007 16:42:10 Log Job History (FailureNotificationJob)
Step ID 1 Server MSK-CDBPO-01 Job Name FailureNotificationJob Step Name MainStep Duration 00:00:00 Sql Severity 16 Sql Message ID 6522 Operator Emailed Operator Net sent Operator Paged Retries Attempted 0
Message Executed as user: CORPmssqlserver. A .NET Framework error occurred during execution of user defined routine or aggregate 'StartNotification': System.Security.SecurityException: Request for the permission of type 'System.Net.WebPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. System.Security.SecurityException: at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet) at System.Security.CodeAccessPermission.Demand() at System.Net. The step failed.
What is the reason of this behaviour? Unfortunately I do not have direct access to this server. I have the following guesses: 1) CORPmssqlserver may have not enough permissions to call web service 2) Something wrong with SQL Server account's permissions 2) Something wrong with SQL Server Agent account's permissions I will take the will for the deed. Thanks.
So I have a Web Service that works just fine when I enter the parameter values myself. I get results and can parse it out, storing the results into a table. I even have it working in a "For Each Loop" for one of my variables.  The issue I have is that the Web Service accepts 3 variables, the first being an Array.  How can I populate the array variable for web service?
I have built a SSIS package which runs fine in BIDS. I went into SqlServer Management Studio and created a new job and job step. When Iselect the SQL Server Integration Services Package, I get the belowerror. There are no options on selecting a SSIS package.I searched this error for about 5 hours yesterday and the onlysolution I could find was a user who rebooted their server which fixedthis problem. I did restart the server, which did not fix theproblem.Can anyone help provide more information on this problem and thesolution to it? Thank you, Jason.The specified module could not be found. (Exception from HRESULT:0x8007007E) (SqlManagerUI)------------------------------Program Location:atMicrosoft.SqlServer.Management.SqlManagerUI.DTSJob SubSystemDefinition.Microsoft.SqlServer.Management .SqlManagerUI.IJobStepPropertiesControl.Load(JobSt epDatadata)atMicrosoft.SqlServer.Management.SqlManagerUI.JobSte pProperties.UpdateJobStep()atMicrosoft.SqlServer.Management.SqlManagerUI.JobSte pProperties.typeList_SelectedIndexChanged(Objectsender, EventArgs e)at System.Windows.Forms.ComboBox.OnSelectedIndexChang ed(EventArgse)at System.Windows.Forms.ComboBox.WmReflectCommand(Mes sage& m)at System.Windows.Forms.ComboBox.WndProc(Message& m)atSystem.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)atSystem.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32msg, IntPtr wparam, IntPtr lparam)
We may need to change the account presently used to run the Windows Service "SQL Server Integration Services".What are the implications of making such a change?
I have to access a web service where I pass in a product number and it produces an XML result with an /image section where it has a long string (base64?) Â Â I am trying to call the web service and save the image to the OS.
I am trying to get the result into a variable and save it to disk with  the itemno.jpg as the name
This is a sample file I get back..
<NewDataSet>  <Table>   <ITEMNO>2065</ITEMNO>   <Image>/9j/4QAYRXhpZgAASUkqAAgAAAAAAAAAAAAAAP/sABFEdWNr ...  removed since too long for post  ...</Image>   <ImageDate>2015-04-15T00:00:00+00:00</ImageDate>  </Table> </NewDataSet>
I have Vista x64 and I had been fighting SQL Server for a few days and yesterday I decided for reinstallation. Unfortunately now I am not able to instal the server back!
Each time I got the following error (it refers to SQL Server service):
Code Snippet <Func Name='LaunchFunction'> Function=Do_sqlShutDownRANUInstance <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='203'> Doing Action: Do_sqlShutDownRANUInstance PerfTime Start: Do_sqlShutDownRANUInstance : Tue Sep 04 23:32:16 2007 <Func Name='Do_sqlShutDownRANUInstance'> Service SQLEXPRESS with parameters '' is being started at Tue Sep 04 23:32:16 2007 Unable to start service (3) Error Code: 0x80070003 (3) Windows Error Text: System nie może odnaleźć określonej ścieżki. Source File Name: sqlsetuplibservice.cpp Compiler Timestamp: Wed Jun 14 16:29:04 2006 Function Name: sqls::Service::Start Source Line Number: 316
Setting status of unmanaged components and removing unmanaged resources
Error Code: 3 MSI (s) (F4:E4) [23:32:24:490]: I/O on thread 3716 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 788 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 2948 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 4392 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 5048 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:495]: I/O on thread 4464 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:495]: I/O on thread 4992 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:495]: I/O on thread 4768 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:497]: I/O on thread 3004 could not be cancelled. Error: 1168 MSI (s) (F4!4C) [23:32:24:497]: Product: Microsoft SQL Server 2005 -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (3) System nie może odnaleźć określonej ścieżki. . Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (3) System nie może odnaleźć określonej ścieżki. . <Failure Type='Fatal' Error='3'> <EndFunc Name='LaunchFunction' Return='3' GetLastError='203'> MSI (s) (F4:80) [23:32:24:507]: User policy value 'DisableRollback' is 0 MSI (s) (F4:80) [23:32:24:507]: Machine policy value 'DisableRollback' is 0 Action ended 23:32:24: InstallFinalize. Return value 3. MSI (s) (F4:80) [23:32:24:512]: Executing op: Header(Signature=1397708873,Version=400,Timestamp=925154312,LangId=1033,Platform=0,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1) MSI (s) (F4:80) [23:32:24:512]: Executing op: DialogInfo(Type=0,Argument=1033) MSI (s) (F4:80) [23:32:24:513]: Executing op: DialogInfo(Type=1,Argument=Microsoft SQL Server 2005) MSI (s) (F4:80) [23:32:24:514]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1]) MSI (s) (F4:80) [23:32:24:516]: Executing op: ActionStart(Name=Do_sqlShutDownRANUInstance.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Running action to shutdown instance(Run As Normal User),) MSI (s) (F4:80) [23:32:24:517]: Executing op: ProductInfo(ProductKey={C3F5DBA5-ABFC-443E-AA60-928223AADF53},ProductName=Microsoft SQL Server 2005,PackageName=sqlrun_sql.msi,Language=1033,Version=151129058,Assignment=1,ObsoleteArg=0,ProductIcon=ARPIcon.ico,PackageMediaPath=Setup,PackageCode={08AD0897-0300-4F7D-A3CC-A0CCEDD42E0D},,,InstanceType=1,LUASetting=0,RemoteURTInstalls=0,ProductDeploymentFlags=3) MSI (s) (F4:80) [23:32:24:518]: Executing op: ActionStart(Name=ProcessComponents,Description=Updating component registration,) MSI (s) (F4:80) [23:32:24:519]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWAREMicrosoftWindowsCurrentVersionSharedDLLs,,BinaryType=0,) MSI (s) (F4:80) [23:32:24:520]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWAREMicrosoftWindowsCurrentVersionSharedDLLs,,BinaryType=0,) MSI (s) (F4:80) [23:32:24:520]: Executing op: ComponentUnregister(ComponentId={68C6D258-77E0-11D5-8528-00C04F68155C},ProductKey={C3F5DBA5-ABFC-443E-AA60-928223AADF53},BinaryType=0,) MSI (s) (F4:80) [23:32:24:520]: Executing op: ComponentUnregister(ComponentId={68C6D257-77E0-11D5-8528-00C04F68155C},ProductKey={C3F5DBA5-ABFC-443E-AA60-928223AADF53},BinaryType=0,)
I have added reffrence for DTS Run time (using Microsoft.SqlServer.Dts.Runtime;)
But I am getting an Error like this
Error 1 'Application' is an ambiguous reference between 'System.Windows.Forms.Application' and 'Microsoft.SqlServer.Dts.Runtime.Application' C:Documents and Settingsvahqmd10My DocumentsVisual Studio 2005ProjectsWindowsApplication1WindowsApplication1Form1.cs 23 17 WindowsApplication1
Error 2 'Application' is an ambiguous reference between 'System.Windows.Forms.Application' and 'Microsoft.SqlServer.Dts.Runtime.Application' C:Documents and Settingsvahqmd10My DocumentsVisual Studio 2005ProjectsWindowsApplication1WindowsApplication1Form1.cs 23 39 WindowsApplication1
Error 3 The type 'System.Windows.Forms.Application' has no constructors defined C:Documents and Settingsvahqmd10My DocumentsVisual Studio 2005ProjectsWindowsApplication1WindowsApplication1Form1.cs 23 35 WindowsApplication1
When you pass a complex type (the one represented by class) to a web service the BIDS UI allows you to enter values for every field of that type as constants. But what if you want to pass a variable? Once again the UI allows you to specify a variable for that complex type parameter. But how to make this variable in SSIS?I understand it should have the type of Object. But how to specify what the runtime type of this object is? And how to assign all fields to that object?
I successfully installed SQL Server 2005 and then used the ALTER DATATBASE statement to move around my data and log files for Model, MSDB and TEMPDB. I stopped SQL SERVER Services and physically moved the files to their new locations.. now the service won't start? I get this in the SQL Server ERROLOG:
Starting up database 'model'. 2008-03-17 15:57:01.29 spid9s Error: 17207, Severity: 16, State: 1. 2008-03-17 15:57:01.29 spid9s FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'E:MSSQLAMLDataFiles'. Diagnose and correct the operating system error, and retry the operation. 2008-03-17 15:57:01.29 spid9s Error: 17204, Severity: 16, State: 1. 2008-03-17 15:57:01.29 spid9s FCB::Open failed: Could not open file E:MSSQLAMLDataFiles for file number 1. OS error: 5(Access is denied.). 2008-03-17 15:57:01.29 spid4s Server name is 'KOCSQLDEV01AML'. This is an informational message only. No user action is required. 2008-03-17 15:57:01.29 spid9s Error: 5120, Severity: 16, State: 101. 2008-03-17 15:57:01.29 spid9s Unable to open the physical file "E:MSSQLAMLDataFiles". Operating system error 5: "5(Access is denied.)". 2008-03-17 15:57:01.29 spid9s Error: 17207, Severity: 16, State: 1. 2008-03-17 15:57:01.29 spid9s FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'F:MSSQLAMLLogFiles'. Diagnose and correct the operating system error, and retry the operation. 2008-03-17 15:57:01.29 spid9s Error: 17204, Severity: 16, State: 1.
I can log on to the Server with the account that starts the services and open the .mdf and .ldf files in Notepad.. not sure what's going on.. I then gave the Domain Account that starts the Services Full Control on each of the volumes that I moved the files to.. I checked down to the file level to make sure that the permissions propogated.. the service still won't start.. can someone help?
I recently installed SQL Server 7.0 on my desktop workstation. I has been working great until yesterday when services wouldn't start. The Service Manager gave me a message "An error 1069 - (The service did not start due to a logon failure.) occurred while performing this service operation on the MSSQLServer service." It appears to be a permission problem, but my profile hasn't changed, I have admin rights on my workstation. Can anybody help?
I recently installed SQL Server 7.0 on my desktop workstation. I has been working great until yesterday when services wouldn't start. The Service Manager gave me a message "An error 1069 - (The service did not start due to a logon failure.) occurred while performing this service operation on the MSSQLServer service." It appears to be a permission problem, but my profile hasn't changed, I have admin rights on my workstation. Can anybody help?
I recently installed SQL Server 7.0 on my desktop workstation. I has been working great until yesterday when services wouldn't start. The Service Manager gave me a message "An error 1069 - (The service did not start due to a logon failure.) occurred while performing this service operation on the MSSQLServer service." It appears to be a permission problem, but my profile hasn't changed, I have admin rights on my workstation. Can anybody help?
When i started the service, i am getting the following message Starting up database 'master'. Error: 9003, Severity: 20, State: 1. Cannot recover the master database. Exiting.
i tried starting using -f -m paramters,but could not succeed i don't have any backups for master database is there any way i can restore it from .mdf, .ldf files..
