Hi Gurus,
Please help. I have Error 17805 Severity 20 State 3 in my SQL Server Log. I run SQL SERVER 2K with servie pack 3 on Win 2K AdvncedServer pus service pack 3. Clients access the server over the internet.(SQL Server is database engine to e-commerce site)
Please help as the error was logged twice within an hour apart.
Thanks.;)
Can anyone tell me error 17805 Severity 18 stands for? I think it might be client buffer issue but am not sure, can anyone help?
View 1 Replies View RelatedMy sql server 7.0 sp2 hangs occasionaly. When looking at the sql connections they are
all working and then al of a sudden they go to 0 and the clinets that are searching arewaiting for about 30 seconds or
get timed out.
Also the CPU could be at 25% and then goes to 0 then back to 25%
I am also getting the error 17805
Invalid buffer recieved from the client.
this is to do with the ODS.( microsoft info)
Any suggestions as to what is causing this.? or has anyone else encountered this before.
Hi ,
I am getting this error message in my SQL Server logs.
SQL2k/SP1/Win2k.
Error:17805,Severity 20:State 3
Invalid buffer received from client..
Any thoughts!
Thanks!
Howdy Folks,
Our site has been experiencing this issue for a couple of months now.. Hopefully someone else can assist, as I’ve got to a point where I think issue lies within the application or a Microsoft bug. Web searches have reveled a number installations that have also had this error but its has not revealed an actual fix.
I understand this error code basically means data being returned to the client is getting either corrupted or the data is too large to fit into the buffer on the client side. Client in our case is the terminal server, here after called a application server
As the user base has increased form 5 to 20, I have noticed that the issue is occurring more frequently in comparison to when the company first started using the application /database. Its just about daily now...
The db server also has 8 other db's residing on it - but they are all less than 300 meg.
The attached PowerPoint doc has the trace info & the surrounding code for each process that has suffered a buffer error over a period of a week.
DB Server Environment: Win2000 SP4, SQL2000 SP3a, MDAC 2.7 SP1 refresh.
Application Environment: Written In house in VB.NET Framework 1.1 – setup as a published app on a terminal server – running windows 2000 SP4
Common features of the issue, that have been omitted from trace output for visibility reasons are:
-Involves 1 particular DB (thats accessed by VB app) & its developement db
-All connections are coming from 1 application server
-Issue does not relate to any particular site connecting to the application server using this application
I have reviewed & fixed several potential server side causes but this error still is occuring with in the environment:
MDAC versions must be common on application & server:
- Removed from equation by updating MDAC version on App server to be the same as DB Server: 2.7 SP1 Refresh
Network related
- Considered unlikely; we are also not experiencing network card errors on either server; also all db's would be experiencing connectivity errors.
Which leaves us with Application related options to review:
- Compilation error of application
- App parameter definitions to stored procedures are the correct data type
- Ensure values being passed do not exceed 4000 characters as that has also been known to create this error message
- I've asked the developer to review MS KB 827366 article, as it may be a valid test
- In regard to MSKB 832977 - I am not using pssdiag & have a later version of the MS Analyzer. But what I thought was interesting, is the statement that this problem occurs more frequently when an application submits a large remote procedure call (RPC) input buffer, especially when the RPC input buffer is greater than or equal to 8 KB. However, this problem may occur even if the input buffer is less than 4 KB
- A is using datatypes varchar & char - not nvarchar & nhar
Any assistance with this issue would be appreicated as server performance is being effected - these processes hang around for 1 - 5 mins before terminating (refer duration times in the powerpoint traces)
Thanks In advance
Suze.
Hi,I've developed an ASP.NET application which uses MS-SQL Server 2000 as abackend. But as the site hits increase SQL server reponse becomes lower.At some stage after that SQL Server gets automativally stopped bringingcomplete web-application down to halt. i checked the Windows 2000 EventLogs and found several error logs indicating folloowing line."SQL Server 2000 Error 17805 Invalid buffer received from client.". Butno errors on UI side. What may be the actual problem.In storedproceduresor at some other place?Awaiting favourble reply.Regards,Amit*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies View Relatedhello:
Does anyone have any input on why my SQL Server keeps crashing? I get the following errors:
Error : 17805, Severity: 18, State: 0
00/03/21 09:06:06.42 ods Invalid buffer received from client.
00/03/21 09:09:51.56 kernel SQL Server terminating due to 'stop' request from Service Control Manager
At other times, there were some STACK DUMP ERRORS.
We are on service pack 4 (I have been pushing to apply 5a)
Please help,
Thank you.
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit):
Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,)
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close)
MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
Gathering darwin properties for failure handling.
Error Code: 2
MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
Any ideas?
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
We have reports deployed in the Report Server. While connecting from client, we are getting the error
"An internal error occurred on the report server. See the error log for more details. rsInternal Error)"
Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.
Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.
We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?
Please help.
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access.
I have looked where the error logs should be, but there are no error logs.
I rebuilt the query as I needed to change this, but this did not help.
Is there someone who could point me in the correct direction.
Thanks!
Terry
This has worked fine for weeks, and months.
I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.
Today, actually half way through today, I restarted my computer after installing Photoshop Updates.
Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).
Whenever I run an web app that connects to it I get this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?
--Edit
I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.
My link server was working just fine until friday evening.
It stopped worked over the week end.
with and error Error 7399: OLE DB provider 'MSDAORA' reported an error. OLE DB error .
---my oracle 10g client is working just fine
--TNS names looks fine
---i recreated the link but i am still getting the same error.
I need your help because a lot of jobs are using that link on Monday it is going to be crazzzy.
Hi,
We have a production SQLServer 6.5 running with service pack SP5a update:
I got the following 2 errors.....
1.
Error : 806, Severity: 21, State: 1
Could not find virtual page for logical page 67833121 in database 'tempdb' database 'tempdb'
2.
I got error when I ran a job for Update statistics
Error : 614, Severity: 21, State: 3
A row on page 2697653 was accessed that has an illegal length of -8631 in database 'abc'.
For Error 2: I ran update statistics using query analyser. It is fine
Is there anything I have to do further?
For Error 1 : The work around given by Microsoft
=================================================
I ran
DBCC CHECKTABLE(syslogs)
I am getting the following message on :
master:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 11 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
model:
Checking syslogs
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
tempdb:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 31 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
I ran dbcc checkdb on master,model and tempdb . Still I get the same problem.
for tempdb:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 19 data rows.
for master:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 27 data rows.
for model:
Checking 8
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
All system databases and userdatabase recovered successfully when I restarted sqlserver.
Please advice how to get rid of this problem.
Thanks in advance,
Anu
where can i find it?
thanks
Hi,
I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE.
I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.
I am performing below operations for that.
Step : 1 Pull To Mobile
Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);
Step : 2 Using one device form i am updating table "ItemMaster" table's values.
Step : 3 Push From Mobile
Code BlockmoSqlCeRemoteDataAccess.Push("ItemMaster", msConnectString);
So i am getting an error on 3rd step.
While i am trying to push it says,
"The Push method returned one or more error rows. See the specified error table. [ Error table name = ]".
I have tried it in different ways but still i am getting this error.
Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.
Can any one help me?I am trying for that since last 3 days.
Hi All,
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Thanks & Regards,
Prakash Srinivasan
We are encounrtering a strange error in out sql error log:
source: ods
error: 17824, severity 10, state 0
source: ods
unable to write to ListenOn connection '.pipesqlquery', loginname 'op', hostname 'BOR0181'
This error occurs multiple times per day from several client stations.
It started when we enabled replication on that server, and started replicating the whole database to another server.
Can somebody give me an idea on what the problem could be ?
Bart Roelant
Capsugel Belgium
I got the following error
Error: 823, Severity: 24, State: 4
I/O error 33(The process cannot access the file because another process
has locked a portion of the file.) detected during write at offset
0x0000000a796000 in file xxxxxxxxx.mdf'.
What happend with my database?
Hi,
I am trying to connect to my SQL Server 2005 but it gave me following error message.
TITLE: Connect to Server
------------------------------
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
So, Please help me to solve this problem.
tnks.
$exception {"Arithmetic overflow error converting expression to data type smalldatetime.
The statement has been terminated."} System.Exception {System.Data.SqlClient.SqlException}
occurs
here is my code
protected void EmailSubmitBtn_Click(object sender, EventArgs e)
{
SqlDataSource NewsletterSqlDataSource = new SqlDataSource();
NewsletterSqlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["NewsletterConnectionString"].ToString();
//Text version
NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.Text;
NewsletterSqlDataSource.InsertCommand = "INSERT INTO NewsLetter (EmailAddress, IPAddress, DateTimeStamp) VALUES (@EmailAddress, @IPAddress, @DateTimeStamp)";
//storeprocedure version
//NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.StoredProcedure;
//NewsletterSqlDataSource.InsertCommand = "EmailInsert";
NewsletterSqlDataSource.InsertParameters.Add("EmailAddress", EmailTb.Text);
NewsletterSqlDataSource.InsertParameters.Add("IPAddress", Request.UserHostAddress.ToString());
NewsletterSqlDataSource.InsertParameters.Add("DateTimeStamp", DateTime.Now.ToString());
int rowsAffected = 0;
try
{
rowsAffected = NewsletterSqlDataSource.Insert();
}
catch (Exception ex)
{
Server.Transfer("NewsletterProblem.aspx");
}
finally
{
NewsletterSqlDataSource = null;
}
if (rowsAffected != 1)
{
Server.Transfer("NewsletterProblem.aspx");
}
else
{
Server.Transfer("NewsletterSuccess.aspx");
}
I have a web application developed in VS.NET 2005 [using C# as code behind]; and it uses SQL Server 2000 Enterprise edition as backend.
The application runs fine, though it gives an error on IRREGULAR intervals on SQL data requests.
Error Details:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My problem is this:
1) Why does it show an error of SQL 2005, while I use SQL 2000. SQL 2005 is not even installed on the server, though VS.NET 2005 is installed.
2) The error comes only at irregular intervals. Users are able to login properly otherwise.
3) Application starts working again if we do either of the following: (a) Restart IIS (b) Restart application pool (c) Restart server.
4) Named pipes and TCP/IP are added to the "Network Configuration" of the SQL server 2000.
5) Error does not come on any specific page; or any specific code; or at any specific time.
6) We do not have any background service or any other activity happening on the server; and the server hosts only this application, within a single virtual root.
Any thoughts on why is this happening, and how to resolve this?
Hello,
I am having a crystal report using datastored in a dataset. When I select one of items in a dropdownlist, it gives me this error message. Note that I used that code before in another web page using a different crystal report and a different dataSet and it worked successfully, but this time it doesn't work....anyone can tell me what causes this error and how to solve it???
NOTE: I am using a vb code behind in my .aspx page
Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt: Error in formula <Record_Selection>. '{StProd2.ItemDescription}' The result of selection formula must be a boolean.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: CrystalDecisions.CrystalReports.Engine.FormulaException: Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt: Error in formula <Record_Selection>. '{StProd2.ItemDescription}' The result of selection formula must be a boolean.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[FormulaException: Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt:
Error in formula <Record_Selection>.
'{StProd2.ItemDescription}'
The result of selection formula must be a boolean.]
.F(String , EngineExceptionErrorID
)
.A(Int16 , Int32 )
.@(Int16 )
CrystalDecisions.CrystalReports.Engine.FormatEngine.GetPage(PageRequestContext reqContext)
CrystalDecisions.ReportSource.LocalReportSourceBase.GetPage(PageRequestContext pageReqContext)
CrystalDecisions.Web.ReportAgent.u(Boolean N)
CrystalDecisions.Web.CrystalReportViewer.OnPreRender(EventArgs e)
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Page.ProcessRequestMain()
DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.CREATE PROCEDURE [dbo].[spu_Import_Export_Image](@srvr varchar(50),@db varchar(50),@usr varchar(15),@pwd varchar(50),@tbl varchar(50),@col varchar(50),@mod varchar(1),@imgpath1 varchar(1000),@pk varchar(50))ASBEGINdeclare @path varchar(50)declare @whr varchar(200)declare @fil varchar(100)declare @cmd varchar(1000)declare @imgpath varchar(800)declare @ext varchar(5)--declare @pk varchar(50)declare @KeyValue varchar(8000)declare @image varchar(50)--declare @imgpath1 varchar(1000)declare @imgpath2 varchar(1000)declare @sellist varchar(2000)set @path = 'c: extCopy.exe'select @sellist = 'DECLARE curKey CURSOR FOR SELECT ' + @pk +' FROM '+ @tbl + ' ORDER BY ' + @pkexec (@sellist)OPEN curKeyFETCH NEXT FROM curKey INTO @KeyValueWHILE (@@fetch_status = 0)BEGINset @whr = '"where '+ @pk +' = "' + @KeyValueset @fil = @imgpath1 + '' + @KeyValue --+ @extset @cmd = @path + ' /S ' + @srvr + ' /D ' + @db + ' /U ' + @usr+ ' /P ' + @pwd+ ' /T ' + @tbl + ' /C ' + @col + ' /W ' + @whr + '/F ' + @fil+ ' /' + @modexec Master..xp_cmdShell @cmdFETCH NEXT FROM curKey INTO @KeyValueENDCLOSE curKeyDEALLOCATE curKeyENDGOAbove srcipt runs fine with image data type in one table but when irun for some other table it gives me Error MessageTEXTCOPY Version 1.0DB-Library version 8.00.194SQL Server 'WSQL01' Message 170: Line 1: Incorrect syntax near '99'.(Concerning line 1)DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.ERROR: Could not use database 'test1'NULL-----------Aslo it only runs on server console if i run it from workstation uingsame files and tables it gives me an error again. Can anybody help meand reply me at Join Bytes! asap.thnx,dharmesh
View 1 Replies View RelatedHi All,
i have migrated a DTS package wherein it consists of SQL task.
this has been migrated succesfully. but when i execute the package, i am getting the error with Excute SQL task which consists of Store Procedure excution.
But the SP can executed in the client server. can any body help in this regard.
Thanks in advance,
Anand
Hi All...
I am trying to move my site (incomplete) for testing and I am finding that the Db connection process to be
the most difficult, well back to my problem. I can't seem to get past this error and am frustrated with overall
connectivity problems. Please help!!!
===================================================================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
Now you all must admit that, if your somewhat new to this databasing, It's a ***.
The source for my application is Visual Web Designer 2005 Express
It is an ASP.Net driven site with membership roles and all the good stuff.
the latest theory is that I need to change the provider config in the web.config file from AspNetSqlProvider
to something else. Most of my complications and frustrations come from GoDaddy and no access to the
shared server (understandibly).
I hope I gave enough info for help and not too much..
Dave
Hello,
On the development server, I am trying to work with subscriptions . Report Server is windows authenticated.
When no paramters exist for the report, the sucbscription is successful.
But if there are paramters for the report, email delivery fails.
These are not data driven subscriptions.
Did anyone face the same problem ? Can anyone tell me where to start debugging since logfiles just say failure to send the email.
Thanks,
SqlNew
I am attempting to install SQL Server 2005 Developer Edition onto a Windows XP Pro SP2 machine, but unfortunately each time that I attempt to install I receive an error message in the summary log as follows:
Product : Microsoft SQL Server 2005
Product Version: 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup
Last Action : InstallFinalize
Error String : The setup has encountered an unexpected error while Updating Installed Files.
The error is : Fatal error during installation.
Error Number : 29528
There is probably a simple solution for the issue but unfortunately I am unaware of what it is? I can€™t tell if the issue is specific to registry settings, security, file types, etc€¦ The information below surrounds the error w/in the log, any suggestions would be greatly appreciated?
Thanks, Jennifer
MSI (s) (6C:94) [16:02:23:713]: Executing op: SetTargetFolder(Folder=C:WINNTsystem32)
MSI (s) (6C:94) [16:02:23:713]: Executing op: SetSourceFolder(Folder=1System)
MSI (s) (6C:94) [16:02:23:713]: Executing op: FileCopy(SourceName=sqlctr90.dll,SourceCabKey=sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A,DestName=sqlctr90.dll,Attributes=16384,FileSize=66264,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,Version=2005.90.1399.0,Language=1033,InstallMode=58982400,,,,,,,)
MSI (s) (6C:94) [16:02:23:713]: File: C:WINNTsystem32sqlctr90.dll; To be installed; Won't patch; No existing file
MSI (s) (6C:94) [16:02:23:713]: Source for file 'sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A' is compressed
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2318 2: C:WINNTsystem32sqlctr90.dll
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:723]: Executing op: CacheSizeFlush(,)
MSI (s) (6C:94) [16:02:23:723]: Executing op: InstallProtectedFiles(AllowUI=0)
MSI (s) (6C:94) [16:02:23:723]: Executing op: ActionStart(Name=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,,)
MSI (s) (6C:94) [16:02:23:733]: Executing op: CustomActionSchedule(Action=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,ActionType=1025,Source=BinaryData,Target=InstallFTERef,CustomActionData=C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERef|C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData)
MSI (s) (6C:2C) [16:02:23:743]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64E.tmp, Entrypoint: InstallFTERef
FTECa.DLL: INFO: FTE: InstallFTERef(), Entering...
FTECa.DLL: INFO: FTE: GetFTERefInstallParams: FTERef : C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseCHS.txt Size=1000 IDR=1696
.
.
.
.
.
.
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sSVE.xml Size=1035 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTHA.txt Size=1036 IDR=697
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTHA.xml Size=1037 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTRK.txt Size=1038 IDR=2224
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing registry updates,)
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTRK.xml Size=1039 IDR=1142
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1345,Source=BinaryData,Target=Rollback_UpdateETWMOFWithGUID,CustomActionData=100Removing registry updates100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Updating Installed Files,)
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_UpdateETWMOFWithGUID,CustomActionData=010Updating Installed Files100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:10) [16:02:24:464]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64F.tmp, Entrypoint: Do_UpdateETWMOFWithGUID
<Func Name='LaunchFunction'>
Function=Do_UpdateETWMOFWithGUID
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_UpdateETWMOFWithGUID
PerfTime Start: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
<Func Name='Do_UpdateETWMOFWithGUID'>
Calling installSqlEvent Trance
The arguments that are passed to InstallSqlEventTrace are InstanceName: MSSQLSERVER , ProductCodeL: {2373A92B-1C1C-4E71-B494-5CA97F96AA19} , BinPath: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn
INFO: Checking installed version
INFO: Writing MOF file
ERROR: Unable to open registry key: HRESULT = 0x80070005, Key = SYSTEMCurrentControlSetControlWMISecurity
The value returned is -2147024891
<EndFunc Name='Do_UpdateETWMOFWithGUID' Return='1603' GetLastError='0'>
PerfTime Stop: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
Gathering darwin properties for failure handling.
Error Code: 1603
MSI (s) (6C!D0) [16:02:37:273]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
<EndFunc Name='LaunchFunction' Return='1603' GetLastError='203'>
MSI (s) (6C:94) [16:02:37:283]: User policy value 'DisableRollback' is 0
MSI (s) (6C:94) [16:02:37:283]: Machine policy value 'DisableRollback' is 0
Action ended 16:02:37: InstallFinalize. Return value 3.
Trying to update my local developer version of SQL Server 2005 SP1 to SP2. The setup program terminates with the following information dumped from the logs. Not sure if it is related, but I recently installed the SQL Server 2005 Compact Edition (tools, runtime, etc) on the same development machine. It is a little too deep for me to figure out
Darryl
Here are the last few lines of the HotFix.Log
04/24/2007 14:46:48.374 MSP Error: 29527 The setup has encountered an unexpected error in datastore. The action is RestoreSetupParams. The error is : Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 138
----------------------------------------------------------
Failed to read property "InstallIds" {"MachineConfiguration", "", "DUTTONDARRYL1"} from cache
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection:etProperty
Source Line Number: 164
----------------------------------------------------------
Unable to write property into cache: IsClustered
Source File Name: datastoredatastorecacheschema.cpp
Compiler Timestamp: Wed Jun 14 16:28:00 2006
Function Name: DataStoreCacheSchema::writeProperty
Source Line Number: 115
----------------------------------------------------------
Unable
04/24/2007 14:46:48.694 MSP returned 1603: A fatal error occurred during installation.
04/24/2007 14:46:48.790 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
04/24/2007 14:46:48.790 Registry: Cannot read registry key value "Debug"
04/24/2007 14:46:48.806 Copy Engine: Error, unable to install MSP file: c:f01fc31fd0988e3807HotFixSQLFilessqlrun_sql.msp
04/24/2007 14:46:48.822 The following exception occurred: Unable to install Windows Installer MSP file Date: 04/24/2007 14:46:48.822 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllcopyengine.cpp Line: 800
******************************************************
Now the SQL9_Hotfix_KB921896_sqlrun_sql.msp.log shows this as the last few lines
MSI (s) (A4:38) [14:46:48:630]: Product: Microsoft SQL Server 2005 - Update 'Service Pack 2 for SQL Server Database Services 2005 ENU (KB921896)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 1729
MSI (s) (A4:38) [14:46:48:630]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:662]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Product: Microsoft SQL Server 2005 -- Configuration failed.
MSI (s) (A4:38) [14:46:48:678]: Attempting to delete file c:WINDOWSInstaller6749ee3.msp
MSI (s) (A4:38) [14:46:48:678]: Unable to delete the file. LastError = 32
MSI (s) (A4:38) [14:46:48:694]: Cleaning up uninstalled install packages, if any exist
MSI (s) (A4:38) [14:46:48:694]: MainEngineThread is returning 1603
MSI (s) (A4:2C) [14:46:48:694]: Destroying RemoteAPI object.
MSI (s) (A4:04) [14:46:48:694]: Custom Action Manager thread ending.
=== Logging stopped: 4/24/2007 14:46:48 ===
MSI (c) (58:E4) [14:46:48:694]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (58:E4) [14:46:48:694]: MainEngineThread is returning 1603
=== Verbose logging stopped: 4/24/2007 14:46:48 ===
*************************************************************
The Summary.txt looks like this
Time: 04/24/2007 14:46:48.854
KB Number: KB921896
Machine: DUTTONDARRYL1
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Failed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x86 DEVELOPER
Notification Services ENU SP1 9.00.2047.00 x86 DEVELOPER
Integration Services ENU SP1 9.00.2047.00 x86 DEVELOPER
SQL Server Native Client ENU 9.00.2047.00 x86
Client Components ENU SP1 9.1.2047 x86 DEVELOPER
MSXML 6.0 Parser ENU 6.00.3890.0 x86
SQLXML4 ENU 9.00.2047.00 x86
Backward Compatibility ENU 8.05.1704 x86
Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x86
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : In Progress
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29527
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
Any help is appreciated.
Thanks
Derrick