Error 26 - Followed The Guidelines, Still Unable To Make It Work
Nov 7, 2007
Good Morning, I've been searching through all the tutorials and questions, have tried many things. I am still getting "[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]"
as an error. This is what I've got:
I€™m using SQL Server Express 2005, installed with the default settings. Had not touched this program for anything until I started to follow directions to fix Error 26. Visual Web Developer Express ASP.NET is what I€™ve used to build the webpage. I was using the ASP.NET web configuration to add users to the database, which is set to use the provider ASPSqlServerProvider.
SQL Server 2005 Surface Area Configuration
Database Engine Remote Connections €“ set to €śLocal and Remote Connections €“ Using TCP/IP Only€?
SQL Server Browser is Enabled and Running
- is set to Active, under Built In Account €“ Network Service
I have created Windows firewall exceptions for:
sqlservr.exe
sqlbrowser.exe
udp port 1434
SQL Server Configuration Manager
both SQL Server and SQL Server Browser are running.
Under SQL Server 2005 Network Configuration
Shared Memory and TCP/IP are enabled only.
SQL Native Client Configuration
Shared Memory 1
TCP/IP 2
Named Pipes 3
all enabled
I read through the post at http://blogs.msdn.com/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx but as I'm new to SqlServer I do not know how to check on the first three items.
I'm getting extremely frustrated, and would just like the login portion of this website to start working before my boot ends up through the computer. Please help, lol, thank you.
View 9 Replies
ADVERTISEMENT
Jan 30, 2008
I have an OLAP database which is required to update daily. First of all back track a bit about this OLAP database, It is built from an OLAP data source consists of a dozen "Dimension" tables and half a dozen "Fact" tables and they are set up in a normalized relationship. This 20 or so OLAP tables are created from a single "Production" data warehouse de-normalized table. By the way the database engine, SSAS, SSRS and SSIS are installed in one virtual server using Sql 2005 SP2.
Here are the steps I update the OLAP database manually.
At Sql database engine
Drop the existing data warehouse table at the virtual server
Copy the up-todate data warehouse table from a remote server and paste to the database at the virtual server
Drop all the OLAP Fact tables
Drop all the OLAP Dimension tables
Create the Dimension Tables using the Sql script I saved when first created
Create the Fact Tables using the Sql script I saved when first created
Populate the data to the Dimension Tables from the data warehouse table using the Sql script I saved when first created
Populate the data to the Fact tables from the data warehouse table using the Sql script I saved when first created
Assign indexs and constrains to the Dimension Tables
Assign indexs and constrains to the Fact Tables
At Sql Server Analysis Services
Process the 15 Dimensions
Process the 2 OLAP cube
I want to automate the whole process using SSIS. I am new to SSIS and I need some direction on how to make it work?
Thanks
View 1 Replies
View Related
Jul 24, 2006
Hi,
I have a query thatI need to make into one query for the sake of an application reading only one cursor.
Here's the syntax:
select (select distinct(x.amount) from escrow k inner join e120 x on k.escrow = x.escrowinner join a10 g on x.escrow = g.escrow where k.ftype = 'S' group by x.amount, g.officer) As New,a.officer as Officer, count(distinct(j.fstatus))as Escrow_Type, count(distinct(j.amount))as Amount, count(distinct(d.open_date))as [Open], count(distinct(d.close_date)) as Closed, count(distinct(can_date))as Cancelled
from a10 a inner join escrow d on a.escrow = d.escrowinner join e120 j on j.escrow = d.escrow where j.id_scr = 'e21' and j.fstatus = 'PAID' group by a.officer
The error message i'm recieving is the following:
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Any ideas? any suggestions would be great.
Thanks
View 3 Replies
View Related
Aug 15, 2006
Select *From HSRSeasonWHERESeasonID='1'HSRID=(Select HSRID FROM HSR WHERE HotelID='1' AND ServiceID='1' AND RoomID='1')
View 1 Replies
View Related
Feb 7, 2008
I have a scenario whereby I'd like to insert multiple rows into a table on a SQL server database as efficiently and easily as possible.
After some research, it looked like .NET 3.0's SqlBulkCopy class would do what I want. I've tried to set something up, but it's not working. It's not even throwing an error. The code executes but it simply hasn't done the insert by the end of it!
My table structure is simple. The name of the table is LPSTUnavailableDate. It has just two columns, one of them an auto-populated ID field:
LPSTUnavailableDateId, INT, PRIMARY KEY, IDENTITY(1,1)
View 1 Replies
View Related
Oct 15, 2014
I am currently stuck on how to make this 2 separate query work together, both work as i want them to individually, please note the syntax is according to a application i use that uses mysql to manipulate columns in an imported csv file.
CONCAT('at-',
REPLACE([CSV_COL(18)],'http://www.homebuy.co.uk/product.php/','')
)
removes last character i.e. /
SUBSTRING([CSV_COL(18)], 1, CHAR_LENGTH([CSV_COL(18)]) - 1)
basically i need these 2 to work together to give me an output like this
at-09fd8903
from the this. URL...url above minus the "" as i said both work on there own, but not together.
View 1 Replies
View Related
Feb 26, 2008
Hi - I'm in a situation with a very large table, and trying to run an update that, any way I've approached it so far, seems to be taking unnacceptably long to run. Table has about 20 million rows, looks something like this:
ID - int, identity
Type - varchar(50)
PurchaseNumber - varchar(50)
SalesAmount - Money
ID Type PurchaseNumber SalesAmount
1 A 3834AA38384 20.32$
2 B 3834AA38384 11837.32$
3 C 3834AA38384 666.32$
4 C 887DF88U01H 23423.32$
5 A 887DF88U01H 12.32$
6 B OI83999FH28 4747.1$
7 D 38438495985 9384.6
8 E 02939DDJJWI 22.22$
9 F 07939SDFDF2 33.33$
The goal of the update is to make the [Type] uniform across [PurchaseNumbers], according to the max sales amount. For each PurchaseNumber a, set the type = the type of the row that has the MAX salesAmount. If there is only one entry for PurchaseNumber, leave the type alone. Expected update after completion would look like this:
ID Type PurchaseNumber SalesAmount
1 B 3834AA38384 20.32$
2 B 3834AA38384 11837.32$
3 B 3834AA38384 666.32$
4 C 887DF88U01H 23423.32$
5 C 887DF88U01H 12.32$
6 B OI83999FH28 4747.1$
7 D 38438495985 9384.6
8 E 02939DDJJWI 22.22$
9 F 07939SDFDF2 33.33$
I got this out of a warehouse, and it definitely isn't normalized well. Was considering breaking down into a better model, but I'm not yet sure if that would make the update easier.
I've been approaching this with sub-queries (finding all the PurchaseNumbers with more then one entry, then the max sales purchase of that purchase Number, then the type of that purchase number and sales amount to update all of that purchase number) but this not only ends up a little messy, but also very slow.
The only other detail that may be important is that out of the 20 million total rows, about 19.5 million purchaseNumbers are unique. So, really, there are only about 500k rows I actually have to update.
I've thought of a few ways to make this work, but none of them seem fast and wanted to see if anyone had a pointer. Thanks!
View 5 Replies
View Related
Oct 22, 2007
Hello, I have what should be a very simple problem, but I cant solve it.
I want to have a stored procedure return a table query (no problems here) but I also need to supply several parameters to the stored procedure (again, no problem!)
Here is the problem, I need to be able to supply a wildcard into the stored procedure as an argument somehow. I can do this already, but the results are incorrect!!! It seems like when local variables are used, the wildcard argument gets ignored. for example, I have included the following example:
DECLARE @Dv_id nchar(15)
SET @Drv_id = '%'
SELECT Diver.*, (ROW_NUMBER() OVER(ORDER BY Dv_id)) as RowNum FROM Diver WHERE Dv_id LIKE @Dv_id
SELECT Diver.*, (ROW_NUMBER() OVER(ORDER BY Dv_id)) as RowNum FROM Diver WHERE Dv_id LIKE '%'
OK, this is an example of my problem, the results I get from this are that the fist SELECT return 0 rows.
The second SELECT returns the correct number of rows (everything in the table). Why is there a difference between:
WHERE Drv_id LIKE @Drv_id
and
WHERE Drv_id LIKE '%'
?
The wildcard statement '%' is supposed match everything, correct??
It seems like the local variable SET command syntax eats up my value of '%' and turns it into a NULL.
Is there any way around this?
View 2 Replies
View Related
May 16, 2007
Its been almost 10 years since I have had to do work with good-old RecordSet objects...
I am filling a RecordSet with data returned from a SQL server via a stored procedure. I then set the ActiveConnection property to Nothing in order to disconnect it so I can make changes to it.
But when I try to set the value on a given row I get back a "Multiple-step operation generated errors. Check each status value" error message. My understanding is that this is indicative of trying to use the wrong datatype. I have verified that the type is correct (I am dealing with integers) so I am at a loss for what the problem could be.
Here is my code:
Set rsPackages = CreateObject("ADODB.RecordSet")
rsPackages.CursorLocation = adUseClient
rsPackages.LockType = adLockBatchOptimistic
rsPackages.Open "EXECUTE stp_FetchPackageData", myConn
rsPackages.ActiveConnection = Nothing
Response.Write("Value: " & rsPackages("TotalCount")) ' returns 0
Response.Write("Data Type : " & rsPackages.Fields("TotalCount").Type) ' returns 3 = adInteger
rsPackages("TotalCount") = 1 ' throws multi-step error
Oddly enough, when I look at the Attribute property of the field I get back a value of 112. When you break it down I think that value indicates the row value is read-only? (Could that be my problem? Just a really bad/unhelpful error message?) But if I try to change it I get back a message saying cannot be done since RecordSet is already open.
Thanks,
Jason
View 2 Replies
View Related
Jun 7, 2015
Below is the stored procedure i have it works fine if i have 1 value passed to @invited_by but i want to modify but i want this code to be working for multiple inputs .Lets say if i do
exec [dbo].[sp_GetInvitationStatusTest] 'Test1 . I get the desired output but i want this procedure to work for
exec [dbo].[sp_GetInvitationStatusTest] 'Test1,Test2'.
USE [merck_acronyms]
GO
[code]....
View 2 Replies
View Related
Apr 26, 2015
For some reason i am not able to make remote connections from VS 2013 to my current installation of SQL server 2008 so i thought to uninstall it and install another edition i got from MSDN but i the uninstall process keeps failing saying theres a known compatibility issues with 2008 and 2008 R2. it also gave me the option to seek solution online but when i click on it it is unable to get a solution online and i am never able to uninstall it. i need to get SQL server up and running.
View 2 Replies
View Related
May 16, 2008
Clean vista install,
Clean full office 2007plus install
Clean visual studio 2008pro install
Many failed sql 2005dev installed, did SKUUPGRADE-1
Now have office2007 Smallbiz, VS2008pro, SqlExpress and sql 2005dev installed.
Note outlook 2007 error on first run after sql2005dev.
Seams to have broken and created a new sql connection, don€™t think its the original.
but that€™s not the current issue !
web admin page error, could not connect to db
I did regsql.exe from the net dir and the web admin work and the db is created for roles and such in vs 2008 via web admin page and mssql.
Managed to create db in apps data folder and modify connection in server explorer.
Added table to aspx page from apps folder and it runs via f5, but errors under localhost.
€śCannot open user default database. Login failed.€?
€śLogin failed for user 'NT AUTHORITYNETWORK SERVICE'€?
Have seen some reference to iis permissions, but not sure what to change?
Is it a file level permission, a virtual permission
Works in vs2008 using f5 run!
http://localhost:50115/vs2008/
Can work with apps folder db file in vs 2008 server explorer
Had to modify db connection back to sqlexpress in server explorer
Can work with db in sql management studio, have three local instances;
Pc
Pcsqlexpress
Pcsmallbiz
Can display db data in aspx page via f5 , but not localhost unless vs2008 is not running!!!
Have not been able to make vs2008, Sql2005dev, sqlexpress all work together using iis in vista via localhost and vs2008 f5 at same time??
Can€™t do anything with db in solutions explorer, but can work in server explorer if I modify connection back to sqlexpress
Can€™t display data aspx page via localhost
http://localhost/vs2008/
Cannot open user default database. Login failed.
Login failed for user 'NT AUTHORITYNETWORK SERVICE'
Localhost works in iis via virtual directory if I remove db grid in page or vs is not running
Could someone test and tell how to use all of these together?
What is going to happen if I get it to work local and then try to upload to shared host?
<connectionStrings>
<remove name="LocalSqlServer" />
<add name="LocalSqlServer" connectionString="Server=wabpc;Database=VS2008test;Integrated Security=true" providerName="System.Data.SqlClient" />
<add connectionString="Server=SQLEXPRESS;Database=Database.mdf;Integrated Security=true" name="sqlexpress" />
</connectionStrings>
If I close vs2008 and the management studio, localhost works and displays the db info!!
Open vs2008, modify connection back to sqlexpress and the aspx page breaks via localhost
Close vs2008 and local host works
Open vs2008 and get a error 25 in server explorer connection string invalid, but f5 works after the offline clears.
I change db connection back to sqlexpress to work with db in server explorer!
That breaks localhost, but f5 works
Any ideas?
Need more Tylenol
View 9 Replies
View Related
Nov 27, 2006
I try to go to a command prompt to get this to run right with no luck. Is there something that I am not doing right? It gives me the help library, but thats about it. Also, I have dealt with Oracle in the past. And was wondering is there a way to access the SQLCMD utility on a workstation with a login of some kind?
--David
View 1 Replies
View Related
Dec 2, 2015
I'm trying to get the application logging to work, but nothing is happening. I'm using SQLServer2014.
I've followed the instructions on [URL] .... , even copying and pasting the snippet into web.config, but nothing happens, no log is created in the default directory.
Is there something version specific? Does 2014 behave differently?
View 2 Replies
View Related
Apr 6, 2007
Hey all!
Sorry for the less then descriptive post title but I didn't find a better way to describe it. I'm developing an app in the express editions of VB and SQLserver. The application is a task/resource scheduler. The main form will have a datepicker or weekly overview and show all tasks scheduled per day. The problem is, I've got one or more people assigned to tasks and I wonder what's the best way to design this. Personally, I'd go for one Task table, a People table and a table that provides a link between them (several record per task, one for each person assigned linking TaskID and PplID). However, I don't see a nice way of showing this data to the end user, allowing him to edit/add etc on ONE screen.
To fix that the only way I see is just add columns to the Task table for every person with select boxes. This way everything can be done on one simple screen. This obviously does present some future issues.
On top of this, which people are available on a day varies and there should be an option to allow a user to set who is available on a specific day. Which would lead me to my first idea and add another table that would provide this. but then I'm having design issues again for the form.
I'm kinda stuck atm, can anyone shed some light on this. I'm sure there is an elegant way of doing this but I'm failing at finding it.
Thanks in advance,
Johan
View 5 Replies
View Related
Jul 21, 2004
Hi folks, ya all are just fine i hope.
I've a question regarding indexes.
I've a table that is very often updated. My boss asked me to keep a log of each record when the table is updated. I've created an AFTER UPDATE trigger on the table and throw the old record into a log table on each update. The table would get large earlier. I want the updates on the original table fast, so i don't wanna add any kind of indexes on the log table. The log table will be scarcely queried only if the user has made a mistake and we want the old record back.
Now, i've column named event(DATETIME) log table that records CURRENT_TIMESTAMP. Should i create a clustered index on this column so the records get in sequence (the values in the column will be unique due to time and seconds being stored). I could be able to access records fastly in the log table on the basis of EVENT column. But how much it would cost the updates on the original table??
My major concern is to keep the updates on original table fast while logging the old records.
Usually it's said not to created indexes on date fields. Do i need to create non-clustered index or i am following the correct path.
Any tips and guidlines; highly appreciated.
Howdy!
View 4 Replies
View Related
May 31, 2007
hi all
i want to know the basic guidelines for developing and implementing and developing sql server database
Thanks in Advance
Malathi Rao
View 3 Replies
View Related
Jun 28, 2006
Hi All,
We have an application requirement for a database supporting field service engineers, which calls for a central SQL Server databse, and laptops with the same database replicated onto SQL Express. I'm resposible for designing the database for this, physical and logical. I've designed and built many a database, but never had to use replication before.
I've read through BOL, and understand how the merge replication process works, and I have no problem designing the database assuming it were to run on a single server.
What I am trying to find are whitepapers, or equivalent, on "best design and implementation practice", and especialy common mistakes to avoid.
I know that the windows programmers responsible for the UI will not completely abstract the database from the code (no matter how desirable that is or how often I tell them!), and I really don't want to find I have to change the physical tables or replication logic after they've coded most of the UI .
Many thanks in advance
Richard R
View 3 Replies
View Related
Feb 16, 2006
What is exactly the recommended way of using a SqlCeConnection object in your application?
In all the examples I see (IBuySpyDelivery for example) it opens the connection object in the constructor and leaves it open most of the time until the class gets disposed.
Is that the way to do it? Or should you open and close the connection for each database action (insert/select/delete) you're doing on the local SQL Mobile database?
I'm a bit confused, but maybe I'm messing up the way of working on remote database servers with how it should be done on a local SQL Mobile db.
View 7 Replies
View Related
Jan 3, 2007
Hello all,
We have some doubts regarding NSTL guidelines for motorola Q. Our application is managed application. Which ocasionally connects to server. It is very helpful if we can get answers urgently.
Hopper Test €“ How can we make it run on Smartphone 5.0 (Motorola Q)? Is this tool only applicable for pocket pc 2003?
Application Verifier Test Tool €“ Is this tool only applicable for unmanaged code? If we are using .NET as the development environment, do we still have to use this tool?
Call Interupts €“ Is their a special way of handling Call Interrupts in the application or the default behaviour provided by the device (Moto Q) is OK?
Send Key (Green key) on the device €“ What is the expected behaviour of this key when the application is running? Do we have to handle it separately in the application
Is their a maximum space limit allowed for creation of the database files for an application?
Is their any specific utility like MaxfileCNT which NSTL uses for checking the behaviour of the application when there is no space available on the device?
thanks & regards,
Rashmi
View 3 Replies
View Related
May 3, 2004
We are about to change the sa password, currently all packages and jobs rely on this account. I imagine there is probably a better architecture that we could employ to ease this process. Any suggestions recommendations?
Also any caveats I should be aware of regarding places to look that might currently rely on the sa account so that we do not need to worry about existing processes from breaking?
I think we are going to create an NT account for DTS Packages and possibly use the same account for any DTSRun jobs, does this make sense? Or is there anything to gain by having these as separate accounts? Also should this be the same account used to run the MSSQLServer process?
I tried doing a search for this information here, thinking it was already covered, but could not find anything that informative, any resources that you could point me to would be appreciated, I will look on BOL as well as MSFT to see what I can dig up.
View 1 Replies
View Related
Apr 16, 2008
I am looking for guidelines for log file sizing, specifically where database reorgs are required
View 1 Replies
View Related
Jan 7, 2008
Hello,
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
View 12 Replies
View Related
Oct 17, 2006
Hi,
We have a number of databases running on our SQL2000 Servers. The databases use Stored Procedures which we call from our VB.NET apps, developed in-house. We now wish to upgrade our servers to SQL2005.
In the past, when upgrading from VS2002 to 2003 and then 2005, we have developed and executed Test Plans to ensure that the code upgrades properly. Microsoft even supplies FXCop and other tools to help. I now wish to develop and execute a similar Test Plan to ensure that our databases will work as required.
Does Microsoft supply any similar tools or guidelines for testing that databases written for SQL2000 will work as required on SQL2005? I see the Upgrade Wizard to examine the Server but is there a similar tool for testing databases? Are there any guidelines on the tests to include in such a Test Plan?
Thanks
View 3 Replies
View Related
Dec 15, 2006
dear friends,
i started using Asp.net for developing webparts, web parts automatically connect to a database to be created and saved in the database.
i had already Sql Server 2005 Express Edition installed so my webpart page ran and automatically created the database "AspNetDb" in the "App_Data" folder.
but when i uninstalled Sql Server 2005 Express Edition and then installed the Sql Server 2005 Enterprise Edition, it gave me the following Error 26 as below :
--------------------------------------------------------- Beginning of Error Message --------------------------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:
If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
--------------------------------------------------------- End of Error Message --------------------------------------------------
then when i checked the Machine.config file, i found this....
<connectionStrings> <add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /> </connectionStrings>
then i thought it's becoz, of the datasource thing that the Machine.Config file supports by default the default free edition of Sql Server 2005 which is the Sql Server 2005 Express Edition.
but friend in my company we use Sql Server 2005 Enterprise Edition, so can anybody pls guide me and get me out of this soup on helping me to use Sql Server 2005 Enterprise Edition by modifying either 1) Machine.Config File and/or 2) Web.Config file and/or 3) any other way, but please help i want to do this, please......
regards and thanks
Gurjit Singh
View 2 Replies
View Related
Jun 8, 2007
I am new to SSIS. i am trying to port database from SQL SERVER 2000 to 2005. i am using "Transfer SQL Server Objects" for this. i am just trying to move one object for testing wether it works or not. and it is not working. i am getting this error.
[Transfer SQL Server Objects Task] Error: Execution failed with the following error: "ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80040E37. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E37 Description: "Invalid object name 'dbo.consta_AE'.". helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
Both DBs are on seprate machines. of you need any more info please let me know. that would be great help.
Thanks
View 8 Replies
View Related
May 3, 2006
I'm troubleshooting a stored procedure that suddenly decided to stop working. I narrowed down the problem to the last part of the stored procedure where it selects data from a temp table and inserts it into a physical table in the SQL2000 database.
I keep receiving the following error:
Server: Msg 8115, Level 16, State 8, Line 140
Arithmetic overflow error converting numeric to data type numeric.
The data values all appear to be correct with none of them seeming to be out of precision, but I keep getting the error. I've tried casting all the values and it didn't work. It executes w/o error when I comment out that particular insert. I just don't get it.
Any help would be appreciated. Thanks.
Code below:
-------------------------------------------------------------
declare @dtAsOfdate DATETIME
set @dtAsOfDate = '2006-04-16';
DECLARE @RC INTEGER
-------------------------
-- 1) Eligible Investments:
-------------------------
-- Input: @SPVId - SPV we are running process for
-- @Yes - value of enum CCPEnum::eYesNoYes (get by lookup).
-- Output: Recordset (temp table) of Collaterals that are eligible for MV Test (#MVTriggerInvestments).
DECLARE @Yes INTEGER
EXEC @RC = [dbo].CPLookupVal 'YesNo', 'Yes', @Yes OUTPUT
IF (@RC<>0)BEGIN
RAISERROR ('SP_OCCalculationMVTriggerTest: Failed to find Yes enum', 16, 1) WITH SETERROR
END
drop table #MVTriggerInvestments
BEGIN
SELECT dbal.SPVId,
dbal.CusipId,
dbal.GroupId,
@dtAsOfDate AS AsOfDate,
dbal.NormalOCRate,
dbal.SteppedUpOCRate,
dbal.AllocMarketValue AS MarketValue,
dbal.NbrDays,
dbal.PriceChangeRatio
INTO #MVTriggerInvestments
FROM DailyCollateralBalance dbal
JOIN CollateralGroupIncludeInOC gin
ON dbal.SPVId = 2
AND gin.SPVId = 2
AND dbal.AsOfDate = '2006-04-16'
AND @dtAsOfDate BETWEEN gin.EffectiveFrom AND gin.EffectiveTo
AND dbal.GroupId = gin.GroupId
AND gin.IncludeInOC = @Yes
END
select * from #MVTriggerInvestments
print 'end #1'
--select * from #MVTriggerInvestments --looks ok
--------------------------------------------------------------
-- 2) Calculate Weighted Average Price change ratio Market Value (by Group):
-- PCRMV - Price Change Ratio Market Value
--------------------------------------------------------------
-- Input : Recordset of collaterals (having New/Old prices, MarketValue defined)
-- Output: Recordset Aggregated by Group (#GroupOCRate)
drop table #MVTriggerGroup
BEGIN
SELECT A.SPVId,
A.AsOfDate,
A.GroupId,
A.NormalOCRate,
A.SteppedUpOCRate,
A.MarketValue,
cast([dbo].fn_divide_or_number (B.PriceChangeRatioMarketValue, B.MarketValueForPeriod, 0.00) as numeric(12,9)) as PriceChangeRatio,
CAST (0 AS NUMERIC(12,9)) AS OCRate,
CAST ('' AS VARCHAR(6)) AS OCRateType,
CAST (0 AS NUMERIC(18,2)) AS DiscMarketValue,
CAST (0 AS NUMERIC(18,2)) AS InterestAccrued
INTO #MVTriggerGroup
FROM
(
SELECT SPVId,
AsOfDate,
GroupId,
NormalOCRate,
SteppedUpOCRate,
cast(SUM(MarketValue) as numeric(18,2)) AS MarketValue
FROM #MVTriggerInvestments
GROUP BY SPVId, AsOfDate, GroupId, NormalOCRate, SteppedUpOCRate
) A --works up to here
JOIN
(SELECT SPVId,
cast(SUM(AllocMarketValue) as numeric(18,2)) AS MarketValueForPeriod ,
cast(SUM(AllocMarketValue * PriceChangeRatio) as numeric(18,2)) as PriceChangeRatioMarketValue,
GroupId
FROM T_DailyCollateralBalance
WHERE SPVId = 2
AND AsOfDate between '2006-03-17' and '2006-04-15'
AND IsBusinessDay = 1
GROUP BY SPVId, GroupId
) B
ON A.SPVId = B.SPVId
AND A.GroupId = B.GroupId
END
print 'end #2'
---------------------------------------------
-- Calculate OCRate to apply for each group.
---------------------------------------------
BEGIN
UPDATE #MVTriggerGroup
SET OCRate = (CASE WHEN ((PriceChangeRatio < 0) AND ABS(PriceChangeRatio) > (0.55 * NormalOCRate)) THEN SteppedUpOCRate
ELSE NormalOCRate
END),
OCRateType = (CASE WHEN ((PriceChangeRatio < 0) AND ABS(PriceChangeRatio) > (0.55 * NormalOCRate)) THEN 'stepup'
ELSE 'normal'
END)
END
print 'end #3'
-------------------------------------
-- Calculate discounted Market Value
-------------------------------------
UPDATE #MVTriggerGroup
SET DiscMarketValue = MarketValue / (1.0 + OCRate * 0.01)
print 'end #4'
---------------------------------
-- Insert data from temp tables
---------------------------------
-- 1)
select * from #MVTriggerInvestments
print 'begin tran'
BEGIN TRAN
DELETE T_MVTriggerInvestments
WHERE SPVId = 2 AND AsOfDate = '2006-04-16'
print 'DELETE T_MVTriggerInvestments'
--error is here!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
INSERT T_MVTriggerInvestments
(
SPVId ,
CusipId ,
GroupId ,
AsOfDate ,
NormalOCRate ,
SteppedUpOCRate ,
MarketValue ,
NbrDays ,
OldPrice ,
NewPrice ,
PriceChangeRatio
)
SELECT SPVId ,
CusipId ,
GroupId ,
AsOfDate ,
NormalOCRate ,
SteppedUpOCRate ,
MarketValue ,
NbrDays ,
0.00 ,
0.00 ,
PriceChangeRatio
FROM #MVTriggerInvestments
print 'end mvtriggerinv select'
COMMIT TRAN
--end error!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-- 2)
print 'begin tran 2'
BEGIN TRAN
DELETE T_OCTestGroup
WHERE SPVId = 2 AND AsOfDate = '2006-04-16'
INSERT T_OCTestGroup
(
SPVId ,
AsOfDate ,
GroupId ,
NormalOCRate ,
SteppedUpOCRate ,
MarketValue ,
PriceChangeRatio,
OCRate ,
OCRateType ,
DiscMarketValue ,
InterestAccrued ,
SectionA ,
CPFace ,
IntExpense ,
Fees ,
SectionB ,
Receivables ,
IntReceivables ,
CashBalance ,
Investments ,
SectionC ,
ExcessCollateral,
MaxCPAllowed
)
SELECT
SPVId ,
AsOfDate ,
GroupId ,
NormalOCRate ,
SteppedUpOCRate ,
MarketValue ,
PriceChangeRatio,
OCRate ,
OCRateType ,
DiscMarketValue ,
InterestAccrued ,
0 ,
0 ,
0 ,
0 ,
0 ,
0 ,
0 ,
0 ,
0 ,
0 ,
0 ,
0
FROM #MVTriggerGroup
print 'end tran 2'
COMMIT TRAN
View 4 Replies
View Related
Sep 30, 2004
Any help at this stage is welcome!
Due to collation-discrepancies the publisher and subscriber databases have been recreated.
When however I attempt to restart the publishing...SQL gives the message
"The process could not make a generation at the 'Subscriber"
There is enough space on the harddisk of either subscriber or publisher 3Gbyte+
UserRights are ok and I reinitialized the publication.
Everything seems ok and yet I get the error mentionned above.
Can anyone give me some help with this?
Thank you!! :)
VincentJS
View 2 Replies
View Related
Sep 4, 2015
I'm trying to create an SSIS package job in SQL server 2014 but I get the following error when trying to change the Package source and confirm. I have alsredy checked the connection mangers and they were all successful, I'm not sure what I should be checking.
"Make sure that the required parameter "name of parameter" is set".
View 2 Replies
View Related
Sep 8, 2006
i am getting the above error on my database i have 2 rows with the same info on and another 2 with the same info on. example:
ID username password
1 bob bob
1 bob bob
1 john john
1 john john
I know this is a fault with ms sql 2005 however how do i fix it?
Ive found this link which explains everything but how do i start a query. I tried clicking on new query and copying the code. What is table1 meant to be? the database is dbl.tbl_admin. It wont find my database.
Im not sure how to do it anyway.
I need to change it though as its my admin password and Ive given it out to web design companys
http://geekswithblogs.net/allensb/archive/2006/07/27/86484.aspx
Can some 1 read the above page and give me full instructions, I dont know what im doing thanks
info@uktattoostudios.co.uk
View 7 Replies
View Related
Nov 24, 2006
Hi guys, can I know the steps on creating a database snapshot on a mirror database? Thx for the assistance. :)
Best Regards,
Hans
View 1 Replies
View Related
Dec 20, 2006
First Error:
I am currently trying to get my reporting services to run on a site other than the default website... on my test server are three sites listed in my IIS: Default Web Site, Microsoft Share Point Administration, and Data Test Site.
My ReportingServer and Reports directories run fine in my Local Web Site but when i add the Directories to my Data Test Site only the Reports Directory runs... the ReportServer does not run and gives me :
You are not authorized to view this page
You might not have permission to view this directory or page using the credentials you supplied.
If you believe you should be able to view this directory or page, please try to contact the Web site by using any e-mail address or phone number that may be listed on the 192.168.1.249 home page.
You can click Search to look for information on the Internet.
HTTP Error 403 - Forbidden
Internet Explorer
Second Error:
I was trying to fix the problem above and i do not think i changed anything i was just looking through the settings between the two sites and somehow this error came up:
Error
The underlying connection was closed: Unable to connect to the remote server.
Home
I am not sure what i did or if i even did anything i was just looking through the settings. compairing the two sites and now i get the error above.
View 1 Replies
View Related
Mar 27, 2007
I have some ASP.NET C# code which executes a stored procedure in SQL Server via the SqlCommand and SqlConnection classes.
One of the stored procedures that gets executed is giving the error: "Transaction (Process ID 272) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction." This only happens occassionally.
Is there a way to get around this in my ASP.Net application? One thing I tried is ensuring that no 2 users entered the stored procedure concurrently:object synclock = new object() ;
lock (synclock) {
// execute SQL stored procedure
...
} This did not solve the problem, and I'm not even sure if that is the correct implementation to ensure sequential execution of the stored procedure.
View 1 Replies
View Related
