Error 26 When Connecting To SQL Server Instance
Mar 8, 2008
I do hope someone can help
I have a windows server with SQL Express, I have followed the link here and still no luck
http://blogs.msdn.com/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx
I have checked and checked again a thousand times
I can remote desktop and connect through SQL Management Express, but when I try this on my local machine I get the error 26
My knowledge is very limited and could do with some expert help
PS EDIT
I read somewhere that in TCP/IP properties all IP's should be set to 1433, is this correct
at the moment, apart from ALL IP which is set to 1433, IP1-9 are set to Dynamic Port =0, should I be setting all these to 1433
??
View 4 Replies
ADVERTISEMENT
Jan 17, 2008
I am attempting something that I have done many times before; however, in this instance it continues to fail.
I am trying to connect Management Studio to an instance of SQL Server 2005 Express over a VPN. The Management Studio connect dialog always fails with Error 26.
I have:
Enabled the instance for remote connections €“ both TCP/IP and Named Pipes
Ensured that the instance is enabled for TCP/IP on the VPN address (10.2.1.1) and on port 1433
Ensured that the instance is running
Ensured that SQL Browser is running
Ensured that ports 1433 (TCP) and 1434 (UDP) are open on the firewall for inbound traffic
Rebooted the server following this configuration to ensure that the instance services are refreshed
Tried to connect from three separate clients (albeit on the same remote network)
Disabled the firewall to ensure no further complications (as a last resort)
I have this exact same setup functioning on a separate server.
There is an additional backstory to this problem; however, I will not complicate the scenario with it now. If you feel you can help then I can elaborate further on the server€™s history.
Thanks
James
View 3 Replies
View Related
Oct 11, 2007
I have SQL 05 and SQL 200o on same server . SQL 05 version is a named inatnce. But when i try to connect it from my computer first it doest show the name instance in the list and when i manulay write its name i got this error.
"A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)"
I went to check that remote connectiona nd SQL browsing is on or not but both were on . any ideas why this is happening and why the name is not coming in list of Server.
Thanks
View 2 Replies
View Related
Mar 27, 2008
Greetings,
I have a VB 2003 .NET application that I wrote for a customer that connects to a named instance of SQL 2000. Until recently it has been working fine. Lately the program either pops a timeout failure within a few seconds or a general network error. I've increased the connection timeout settings to 90 seconds but the error still pops within a few seconds. I'm thinking something has changed in the environment that prevents a clean connection to the named instance of SQL server.
How should this issue be troubleshoot to determine the problem and what areas need to be looked at?
Thanks
View 3 Replies
View Related
Jun 16, 2008
We have installed SQL 2000 SP4 on Windows 2000 Server. We created named instances on the SQL server.
When trying to connect to named instances from a remote sql client which is on windows 2000 and windows 2003, its throwing an error message saying that remote connections are disabled.
But, remote connections are enabled on the SQL server.
After changing the component services settings on windows 2003 where sql client is installed, we are able to connect to named instances.
But, after applying the same settings on another windows 2003 machine, we are unable to connect to the same instances.
We have another machine where we installed SQL 2005 on windows 2003 SP1. When trying to connect to named instances from any remote client, its throwing an error message saying that remote connections are disabled. But, remote connections are enabled in SQL server settings. We tried connecting to the instances by changing the component services settings but still we are facing the same issues.
Can you please help me on above issues?
View 3 Replies
View Related
Feb 14, 2013
I have opened up a port on a remote SQL instance and can see that the port is LISTENING when using the PortQry tool. I have also set the TCP port in the TCP/IP properties in the IPAll section for that instance, yet I am unable to connect and get an error of
Connection Timeout Expired. The timeout period elapsed while attempting to consume the pre-login handshake acknowledgement. This could be because the pre-login handshake failed or the server was unable to respond back in time. The duration spent while attempting to connect to this server was - [Pre-Login] initialization=1; handshake=14998; (.Net SqlClient Data Provider)
I have done this on other instances, although they were default instances, and it has always worked fine.
View 9 Replies
View Related
Aug 4, 2014
First time I've tried doing this - I have SQL Server 2012 installed on my local machine with an instance running (which was set up under an administrator account, not mine, which has no admin rights), and I'm trying to create a linked table from Access (also on the local machine) to a table on the server.
I tried creating a DSN using Windows Authentication, using the server name which is the same as my computer name, and got the error "Error 18452, Login failed. The login is from an untrusted domain and cannot be used with Windows authentication".
I then created a SQL authentication user ID and password, and tried the same thing using that instead, and got "Login failed for user <myusername>"
Is there some particular setting on the local instance I need to change to allow this kind of connection, or do I need to use something other than the server name to connect, such as an IP address? Remember that I have no admin access on this machine so any solution would have to avoid requiring that.
View 3 Replies
View Related
Apr 3, 2007
This has worked fine for weeks, and months.
I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.
Today, actually half way through today, I restarted my computer after installing Photoshop Updates.
Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).
Whenever I run an web app that connects to it I get this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?
--Edit
I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.
View 1 Replies
View Related
Apr 8, 2004
Hi,
I have two SQL SERVER Instances on the computer I am trying to connect to via VPN:
1) TEST
2. TEST/INST2
I can connect to the first with no problems.
When I am trying to connect to the second (with the Enterprise Manager/Query Analyzer and even with isql) - I get the following message:
"SQL SERVER does not exists or access denied".
I use the SQL SERVER user and password to connect (as login sa).
How can I connect to the second instance?
Thanks in advance.
View 2 Replies
View Related
Nov 7, 2007
I have had to format my laptop and re-install server 2005 developer edition. Im having trouble logging on. My computer name is 28NEWMANSLANE. I installed sql server with a default instance, where as last time i installed with a named instance.
I can not find out with name it has given itself.
am i correct saying that the logging in format would be
computername/instancename ?? using windows authentication
Regards
Rob
View 5 Replies
View Related
Jun 5, 2007
I've installed SQL2005 on a server already running SQL2K on my laptop. SQL2K is the default instance, so I'm trying to connect to SQL2005 using MYSERVERSQL2005 as the instance.
The steps that I've taken are to apply SP2 and enable remote connections (TCP & Named pipes). I've also made sure the SQL Server Browser service is running and enabled.
The error message that I get via SQL2005 client tools is "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
I dont understand as to why i am unable to connect to 2005.
Any ideas?
View 4 Replies
View Related
Jan 3, 2004
Hi,
How can i connect to Named Instance of MSDE on remote server from Enterprice Manager in my local computer ?
Instance name is Helm
I can connect inside server like
osql -S -E .Helm
But how i access from remote machine using Enterprice Manager ?
Regards,
Yujin Boby
View 1 Replies
View Related
Oct 8, 2015
SQL Express 2014 was installed to support reporting for an application. I can connect to the server using the server name without any issue. When I run “select @@version”, I get SERVERNAMESQLEXPRESS, but I can’t connect to the server with SERVERNAMESQLEXPRESS. This is throwing off one of my script when trying to connect to the server.My script connects to the server using SERVERNAME for default instance or SERVERNAMEINSTANCENAME for named instance.
View 1 Replies
View Related
May 24, 2007
Hi All...
I am trying to move my site (incomplete) for testing and I am finding that the Db connection process to be
the most difficult, well back to my problem. I can't seem to get past this error and am frustrated with overall
connectivity problems. Please help!!!
===================================================================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
Now you all must admit that, if your somewhat new to this databasing, It's a ***.
The source for my application is Visual Web Designer 2005 Express
It is an ASP.Net driven site with membership roles and all the good stuff.
the latest theory is that I need to change the provider config in the web.config file from AspNetSqlProvider
to something else. Most of my complications and frustrations come from GoDaddy and no access to the
shared server (understandibly).
I hope I gave enough info for help and not too much..
Dave
View 4 Replies
View Related
Dec 14, 2007
I have 2003 server installed on my machine along with MS SQL Server Management Studio and I am able to connect fine to SQL 2000 Instances. On my laptop running Vista Enterprise, I can not connect to these exact same instances via MS SQL Server Management Studio as I am getting the above error. Does anyone else have this problem? I have no idea what to check for anymore. Thanks in advance.
View 2 Replies
View Related
Jun 20, 2006
ASP v2.0I am getting this error when attempting to sign in to my site once uploaded to the server. Can anyone help me to resolve this error?
Server Error in '/' Application.
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance
Specified) Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: An error has occurred while establishing
a connection to the server. When connecting to SQL Server 2005, this failure
may be caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.42;
ASP.NET Version:2.0.50727.42
View 12 Replies
View Related
Sep 21, 2006
First-time poster (and very new to ASP.NET, so please be patient) - I am using VS 2005. I have an ASP.Net 2.0 app that is using Forms Authentication and a Login server control with AspNetSqlMembershipProvider. I have an instance of ASPNETDB.MDF in the App_Data directory on my local machine and all works well (or at least as expected). I used the Copy Web Site function to port the app (including the ASPNETDB.MDF files) to my production platform, where I encounter the error mentioned in the subject line. I have found posts (both here and other forums) that mention enabling TCP/IP using Surface Area Configuartion Utility, SQL Server Browser are exempt from firewall, and a few other things. My production machine does not have SQL SVR 2005 installed nor SQL SVR Express. Do I have to install SQL Server Express onto my production platform in order to resolve this, or is there another means (something in SQL Server 2005 Management Studio on my local machine) that will enable me to do this on the production machine?Also, I have been told that it is possible to use a database on another machine as the data store for authentication. Does anyone know how to do that? This would make the first question moot.Thanks in advance!
View 2 Replies
View Related
Mar 21, 2008
I have tried to find the solution for the subjectline(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) and i got the solution from the below link but when I set my web.config file according to the posted help i couldn't resolve it kindly help me for thatmany thanks,http://www.aquesthosting.com/HowTo/Sql2005/SQLError26.aspx
View 4 Replies
View Related
Apr 15, 2008
All aspects of my website work as expected when previewed in the browser locally. It appears that I successfully published the website to my hosting company server.After successfully accessing the login page from a hyperlink on the homepage, I attempt to login and receive the following error: Please advise.
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +737554
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +114
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +421
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +133
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
View 10 Replies
View Related
Apr 30, 2008
Ok can somebody please explain to me why only 1/2 my project is getting this error. I am working with SQLExpress on a remote windows 2003 box. The sql server has its service running and the browser is also running. The server has been set to allow remote connections and to accept TCP/IP and Named Pipes. Now, the website uses asp.net membership and roles to allow the users to login, which actually works. So I know that there are no errors in that connection string. However, all the data acess code is compliled as a sepeate class library thats referenced in the bin directory. When calling those methods to beind to a control in code, is where i run into this error. The class library connection string in the app.config file is exactly the same as the connection string in the web.config...i have checked permissions as well, im at a loss to the reason why this is not working....its probably something simple, but im not finding it.
On a seperate note - How do i get the remote database to show up in the server explorer on vs2008, i have tried putting in the ip addressinstance name, and a combo of there items, it will not connect. I have a feeling the two issues are connected. Also fyi, on the remote box, I am able to login with the sql studio express, so im not really sure exactly wuts gong on. Both items are really important and i need to be able to use both of them.
Thanks,
Jeremy
View 1 Replies
View Related
May 15, 2008
Hello, I have deployed myWebApp on the IIS. All went well now, but the site does not have any connection with the database. I've already done a search on the error 26, which gave me alot of hints about solving the problem.Still I'm gettting this error. I already enabled the remote connections through the sql surface area configuration.Could it have something to do with the fact that I use LINQ? I can't find any connectionstring to modify anywhere ... Help would be appreciated.
View 6 Replies
View Related
Nov 17, 2005
Hi,I am working with Webparts in ASP.NET and getting following error
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Can anybody knows how to fix this issue. I have SQL Server 2005 Developer edition.RegardsAhmad
View 1 Replies
View Related
Mar 24, 2006
I made a simple ASP.NET 2.0 Website that uses memberships, roles, and access to MS SQL Server 2005 database. Everything works fine on my development computer (WinXP Pro). When I deployed this Website on another computer (WinXP Pro) and tried to access the main page from the same computer, I get the error below.
I disabled the Windows Firewall (the only one I use), I ensured that SQL Server Browser is Active and Running, and I changed Remote Connections in SQL Server 2005 Surface Area Configuration to use Local and Remote connections for all the components.
In my Web.Config I used:
<connectionStrings><add name="sqlConnString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|DBdemo.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/></connectionStrings>
Any idea why am I getting the following error?
Server Error in '/WebDV' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
Line 2027: sqlConnection = New SqlConnection(sqlString)
Line 2028:
Line 2029: If sqlConnection.State = Data.ConnectionState.Closed Then sqlConnection.Open()
Line 2030: If Not Page.IsPostBack ThenSource File: C:InetpubwwwrootWebDVDefault.aspx.vb Line: 2029 Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734787
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
Default1.Page_Load(Object sender, EventArgs e) in C:InetpubwwwrootWebDVDefault.aspx.vb:2029
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
View 2 Replies
View Related
Oct 31, 2007
Hi All:
I'm having problem connecting remotely to my sql 2005 server. I do get this error msg
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I'm using a named Instance and conncting like 192.168.2.1DB120
I have configured to server to accept remote connection.
I can connect locally bout not remotelly
View 1 Replies
View Related
Jul 13, 2007
Hi,
I have been stuck up with this error.
I am using SQL Srver express edition with asp.net 2.0 on windows XP SP2.
When I open the SQL Management studio and execute queries it works fine.
When I exute query in command prompt using SQLCMD -E -S ServernameInstance
It conect with database and I can freely execute queries in command prompt.
I have also tried to connect with Classical ASP 3.0 It also works fine. No error
I have made all changes that u specified in ur article.
But When I try to connect with asp.net. It gives me error.
"provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"
Same files are workign fine in my office with SQL Server 2005 enterprise edition and ASp.net 2.0. on Windows server 2003. I do not get this error. But at home I am facing this problem again and again.
View 1 Replies
View Related
Jun 8, 2007
All,
One of our developers decided to load 2K5 client tools on to their laptop. They cannot connect getting the following error:
....Error: 26 Error Locating the Server/instance specified (.NET SQLClient Data Provider)....
1.) Allowing remote connections IS enabled.
2.) SQL Browser Service is ON
3.) Windows Firewall is NOT running
4.) All protocols (except VIA) are enabled
Others at this office, including myself, can connect fine in Management Studio. Only this one developer cannot.
Any thoughts and/or help would be much appreciated. I think that the problem has something to do with the first sentance above but I am not positive.
Thanks in advance,
DBA Ben
View 4 Replies
View Related
Mar 12, 2007
Hi
I am really struggling with this problem.
I am connecting to several SQL 2000 servers on another LAN from my workstation and I have to go through a firewall.
I got the firewall people to open port 1433 and was then able to connect any server with a default instance using Query Anlyzer and the IP address of the Server.
When I try to connect from my workstation to a server with a named instance I am being blocked by the firewall before it gets to the server.
I went into Client Network Utility on my workstation and removed named pipes which only left Tcpip using port 1433.
Fire wall is now blocking “nbname UDP 137”.
Is there a setting somewhere on my workstation that I can force the traffic to the named instance to use Tcpip through port 1433.
Any Help would be great.
View 3 Replies
View Related
Mar 16, 2008
I just installed Sql Server 2005, and opened the Sql Server management studio, and the connect to server dialog box popped up, i selected database engine, but what do I put in the server name box? I tried my computer name, and got an error, i tried localhost and got an error, i tried my computer name/localhost and got an error. I installed it as the default instance with windows authentication, and I verified that the sql server service is running, but I always get a login error. Can anyone help me get started?
View 5 Replies
View Related
Feb 11, 2008
Can anyone tell me what are the necessary steps if I want to connect to a Remote SqlExpress Instance ? I am using Visual Studio 2005. When I tried to connect it says that the remote server does not allow remote connection. I have enabled all the protocols from Sql Server Configuration manager and disable the firewall. But it still not working. Pls Help me.
Thank You.
View 4 Replies
View Related
Aug 16, 2006
Hi everyone,
Please forgive me for the newbie question, I've done almost all of my DBA work on Oracle(on UNIX so I'm learning alot of AD stuff too) and am new to MS SQL Server.
I've got a SQL 2005 standard server that I'm trying to get to act as a publisher for a SQL 2005 Express instance, and I think I've narrowed down my problem to a connection issue.
(FYI, the Publisher works fine with another 2005 Standard server)
When I try to connect from the standard server to the express server using 'XYZSQLEXRESS' as my server name, it fails stating that it couldn't find the service, but I can connect just fine if I use 'XYZ' as the server name.
I think this is why I'm having trouble getting replication going as the replication wizard tells me that I have to connect via 'XYZSQLEXPRESS' in order to run the replication scripts.
Can anyone point me to the correct documentation to resolve this problem? Everything was easy-mode DBA work until we tried to add SQL Express to the mix, and I'm sort of running out of time on this one.
Thanks for any help!
View 5 Replies
View Related
Sep 26, 2007
This problem happens on this particular machine and doesn't happen on other machines that I have. And I think this problem belongs to this forum. Because the problem is triggered by a special setting in the connection string.
I followed the steps of threads including Xinwei Hong's instruction for fixing this error(26) but has no luck.
The problem occurs when I call SqlConnection.Open().
I am using window xp, sql2000. the named instance is on local machine, my connection string is like
"Data Source=MSL-1417762\SQL2000;Initial Catalog=PopulateForeignKeys_MSL_1417762_2_5984;Integrated Security=True;Pooling=False;Asynchronous Processing=true"
Whenever I change Asynchronous Processing=true into Asynchronous Processing=false, the problem is gone.
This problem also occurs when I use Visual Studio - Server Explorer - Add Connection dialog - Advanced button - Advanced Properties window where you can set Asynchronous Processing property to true.
Can you please help?
Thanks,
View 1 Replies
View Related
Jun 12, 2006
I'm having an issue when moving my site from my laptop that's running VWD Express and SQL 2005 Express to my production Windows 2003 server running SQL 2005 Standard. The site is a portal site that authenticates to my Active Directory, and uses roles bases in SQL. I can open the site on the laptop and everything works fine and I have no problems. Once I copy the site to the production server and try to access the site, I get the login page fine and try to login. The default page never opens so I'm thinking this must be some type of roles issue. Do I need to do anything with my ASPNETDB.MDF file to make it work with SQL 2005 Standard instead of Express version? I've already made sure that the SQL server is accepting remote connections...what other things do I need to do to my SQL server to ensure proper functioning? Any particular security user I need to be running particular services under? Thanks in advance...
MikeD
View 9 Replies
View Related
Jan 30, 2008
Hi, I have installed SQL Server 2005 and Visual Studio 2005 in my machine.
I got an error when I tried an example.
"An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the
fact that under the default settings SQL Server does not allow remote
connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)" .
I followed many advice online and did the following but still wrong.
Enable networking protocols during managment configuation.
add port 1343 on firewall or turn off the firewall.
make changes in web.confige as
Code Snippet
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
-->
<configuration>
<appSettings/>
<connectionStrings>
<remove name="LocalSqlServer"/>
<add name="LocalSqlServer" connectionString="Data Source=localhostand;Initial Catalog=Players;User ID=test;Password=test"/>
<add name="SqlConnectionString" connectionString="Data Source=localhostand;Initial Catalog=Players;User ID=test;Password=test"/>
<add name="OdbcConnectionString" connectionString="Driver={MySQL ODBC 3.51 Driver}; server=localhost;database=players;uid=test;pwd=test" />
<add name="OleDbConnectionString" connectionString="Provider=Microsoft.Jet.OLEDB.4.0; Data Source=C:andplayers.mdb" />
</connectionStrings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<compilation debug="true"/>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
</system.web>
</configuration>
Thanks for your help.
View 11 Replies
View Related
