SQL Server 2005 X64 Standard running on Windows Server 2003 X64 Htper Threaded Quad processors with 16 GB RAM.
I have had two production servers shut down this week due to Error 3449: SQL Server must shut down in order to recover a database (database ID 1). The database is either a user database that could not be shut down or a system database. Restart SQL Server. If the database fails to recover after another startup, repair or restore the database.
Previous to the shutdown I received multiple Error 3314 & 602: Could not find an entry for table or index with partition ID 491897996509184 in database 2. This error can occur if a stored procedure references a dropped table, or metadata is corrupted. Drop and re-create the stored procedure, or execute DBCC CHECKDB.
Also, Error 9001: During undoing of a logged operation in database 'msdb', an error occurred at log record ID (838:208:1). Typically, the specific failure is logged previously as an error in the Windows Event Log service. Restore the database or file from a backup, or repair the database.
Does anyone have an idea why I have begun receiving these error messages? I have run dbcc checkdb on Master and msdb and they do not show any problems.
I'm from Argentina, I'm running SQL Server 2005 Express. I can connect to SQL Server via Management Studio and see all my db but I don't have acces to them !!
The system gives me the following error when trying to expand all folders:
Database 4 cannot be autostarted during server shutdown or startup. (Microsoft SQL Server, Error: 904)
What is the right procedure for shutdown a production web sqlserver for maintenace purpose. Checking users by sp_who? Any other monitoring for current connections? lockings?
I am just trying to find a good article on the process SQL goes through when shutting down and starting up, so far I have not found anything definitive on Google. I am assuming a checkpoint is invoked and committed transactions are written to disk, while uncommitted are rolled back, but I would like an official textual description of what happens.
Currently i am using SQL server 2005. Since the begining i am facing sqlserver service shutdown problem. Normally it happens in every 2-3 days and sometimes happens twice a day. It halts all the banking operation. After starting MSSQL SERVER service, the system goes online.
Following is the error message recorded in the event viewer. --------------- SQL Server is terminating because of fatal exception c0000005. This error may be caused by an unhandled Win32 or C++ exception, or by an access violation encountered during exception handling. Check the SQL error log for any related stack dumps or messages. This exception forces SQL Server to shutdown. To recover from this error, restart the server (unless SQLAgent is configured to auto restart). ---------------
Please tell me what steps i should take to resolve it.
I have a problem with an instance of SQL Server that refuses torespond to a shutdown request. I've managed to shutdown the SQLManager and DTC services but the sqlservr.exe process is permanentlyin a "Stopping" state.I cannot logon to the instance to issue a SHUTDOWN WITH NOWAITcommand. Short of rebooting the entire server, is there a way I canforce the process to end?Tony
I have SQL Server 2014 Enterprise Edition with a number of in-memory tables sitting in my database.When server is restarted it takes many hours to recover my database if there was data in these in-memory tables before shutdown.As a result, I need to clean up in-memory tables every time before server instance shutdown. This is really annoying and requires extra prescriptive actions for support team. Can I have DDL server/database level trigger to catch shutdown event and clean my data before instance goes down?
I have Configured always on Availability groups between Server 1 Primary Replica(Active), server 2 Secondary Replica(Passive) on top of WCFS...
Listener Name: AGListner( CLIENTS/APPLICATIONS connect using this Name)
Testing Scenario 1(on Virtual Servers):
I have turned network down on Server 1(primary) , then secondary server (Passive ) one came ONLINE and this is now the primary and i was able to connect to AGListner.now When i try to SHUTDOWN/POWER OFF PRIMARY(current Active server),failover happened to Secondary successfully but lost cluster and lost AGListner and was not able to connect ....now applications which are trying to connect using AGListenr name will loose all connections..does AlwaysOn Availability does not support Server SHUTDOWN/POWER OFF?or is there a way to resolve this? or am i doing wrong somewhere?
- Have server1 and server2 - The job has 3 steps: + Step1: check server1 is running, next step2 Server1 is shutdown or can not ping, next step3 + Step2: do anything, for Example: run batch exe on server1 + Step3: do anything, for Example: run batch exe on server2
Step1, i am using ping server1 command,
My problem is if server1 is shutdown, my command (ping server1) is also return true
and in the fact, job is run by follow Step1 -> Step2.
Expectation the job is run by follow step1 -> Step3
Hi, Is there any shutdown command in sql that shutdowns the sql server with a single command or statement, as of now I am using the windows shutdown command.
Is restarting a Windows OS box without first stopping the MSSQL service comparable to a shutdown with nowait command? I know that MSSQL will recover, but wouldn't it recover more nicely if it was shutdown on its own terms prior to the box shutting down? OR. Since it's a Windows service does the OS *know* to stop the service gently, allow the engineto place checkpoints on every db and then shut down the OS?
I've googled plenty and cannot find an exact answer. Lots say it's fine to do - doesn't mean it's right ;)
for the last six months or so my pc has been shutting down all applications for no apparent reason when a 'low virtual memory' bubble appears. I have removed dozens of items, such as games, image editos; all programmes that require a lot of memory but it is no good. Every 40mins or so the pc decides to shut everything down and where it is impossible to start any further applications, unless I log off and on or shut down the pc myself. I really am fed up with this, its so annoying. Is it because of a virus or do I still have too much on my pc?
I have an SSIS package that looks for the existence of a file (using Konesans file watcher) on the network to begin processing. I am trying to find a way to terminate/shutdown the entire process if that file is not out there by say 7:30 AM. I think I could set a timeout on the filewatcher task, but was hoping there was another tool I could use. (If the process had to be restarted late a timeout would still countdown the same period wouldn't it? We'd still need the job to stop by 7:30.)
More background. The package, once deployed, will be called from a command line script that is started by a scheduled task normally, or manually in the event of late availability.
I want to install SP2 for SQL 2012, but I am not sure how my instance would be affected.
I want to know if the instance will go down for any amount of time during the update? I can schedule a server reboot after hours, but don't want to apply the service pack if it will take the instance offline at any point.
While working on my Visual C# 2005 Express programs, I will sometimes open SQL 2005 Express to look at the database. Then I will disconnect the database and exit the SQL Server Management Studio Express.
Then when I run my Visual C# 2005 program the next time, I will always get this error message. "Cannot open user default database. Login failed...."
SqlCommand cmd = new SqlCommand("Select * from CableReading", tcrConn);
tcrConn.Open();
The error is being generated when "tcrConn.Open()" is being executed. This is line 27 of my program.
My question is: Am I shutting SQL 2005 Express down wrong when I go in and look at the database. The SQL 2005 Express is located on the same computer that I am writing my program on.
I copied the error message to the clipboard and copied into this thread.
System.Data.SqlClient.SqlException was unhandled Message="Cannot open user default database. Login failed. Login failed for user 'HDC\jfeeney'." Source=".Net SqlClient Data Provider" ErrorCode=-2146232060 Class=11 LineNumber=65536 Number=4064 Procedure="" Server="\\.\pipe\8A52A6B8-493D-45\tsql\query" State=1 StackTrace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at WindowsFormsApplication1.Form1.button1_Click(Object sender, EventArgs e) in C: empTestCableReadingTestCableReadingForm1.cs:line 27 at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.Run(Form mainForm) at WindowsFormsApplication1.Program.Main() in C: empTestCableReadingTestCableReadingProgram.cs:line 18 at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() InnerException:
Hello:I am doing this small experiment on SQL Injection, and appearantly, I was asked to do the shutdown thing, which I have read about, but don't have a single idea how how to start.Well, basically, I am still confused about a few things:1. Do I need to create a stored procedure first, before I start hacking (shutting down the SQL Server)? Or can I just use a normal User Table?2. I understand that the clause "shutdown with nowait" only allows the sysadmin and serveradmin to do so, so is there anyway a hacker makes himself a sysadmin or serveradmin?3. And I read that only with the login user: "sa", you can perform that action. But in my company, its sql login is not "sa", it's something else, so can I do anything about it?Well, that's all for now. So, actually, I have a project that first requires the user to login and must provide password. (Since I am doing experiment on SQL Injection, thus, it is vunerable). It connects to the sql server to match if the user name entered exists on the table.I hope this information is enough to help anyone to help me hahahahaha.... crossed my finger, though.Thanks in advance.
What are the steps to be followed to shutdown a production sqlserver? (like checking user connections, termination processes etc) IIS is connecting to the database.
Got this situation, trying to do Use SignleMode to recover my handing db, after that lost ldf (and physically too). Tried all things thru SSMS and scripts (below) that I know with no result, is there anything else I can try to recover it, I don't need log file.
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Could not open new database 'MyLostDB'. CREATE DATABASE is aborted.
File activation failure. The physical file name "C:xxxMyLostDB.ldf" may be incorrect.
The log cannot be rebuilt because there were open transactions/users when the database was shutdown, no checkpoint occurred to the database, or the database was read-only. This error could occur if the transaction log file was manually deleted or lost due to a hardware or environment failure. (Microsoft SQL Server, Error: 1813)
EXEC sp_attach_single_file_db @dbname='Commissions', @physname=N'C:SQLDataMyLostDB.mdf' GO CREATE DATABASE Commissions ON (FILENAME = N'C:SQLDataMyLostDB.mdf') FOR ATTACH_REBUILD_LOG GO
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit): Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,) <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI) MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,) MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close) MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2 <Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 Gathering darwin properties for failure handling. Error Code: 2 MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
We have reports deployed in the Report Server. While connecting from client, we are getting the error "An internal error occurred on the report server. See the error log for more details. rsInternal Error)"
Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.
Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.
We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?
I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access. I have looked where the error logs should be, but there are no error logs. I rebuilt the query as I needed to change this, but this did not help. Is there someone who could point me in the correct direction.
I am trying to create a linked server between 2 SQL Server 2005 boxes. When I create the linked server I specify a login for the connection. The strange part is that I get the following error when it goes to test the connection:
The test connection to the linked server failed Login failed for user 'Domainuser'. (Microsoft SQL Server, Error: 18456)
I can use the SQL mangement studio to conenct to the database using this same login. The login has all the server roles assigned to it also.
Can anyone shed some light as to what may be the problem?
I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.
Today, actually half way through today, I restarted my computer after installing Photoshop Updates.
Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).
Whenever I run an web app that connects to it I get this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?
--Edit
I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.
I've installed SQL2005 on a server already running SQL2K on my laptop. SQL2K is the default instance, so I'm trying to connect to SQL2005 using MYSERVERSQL2005 as the instance.
The steps that I've taken are to apply SP2 and enable remote connections (TCP & Named pipes). I've also made sure the SQL Server Browser service is running and enabled.
The error message that I get via SQL2005 client tools is "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
I dont understand as to why i am unable to connect to 2005.
Hi Friends, Im using .Net2008 and MS SQL Server2005, I Have a web application , i want to connect to the server machine SQL Server, When i run the application im getting the following error. Im trying to connect to the database from local machine application to server machine database An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) My WebConfig File is<connectionStrings> <add name="NewConnectionString" connectionString="Data Source=sqlserverservername.com;Initial Catalog=Test;UID=User;PASSWORD=Pwd;Integrated Security=True;connect timeout=30" providerName="System.Data.SqlClient"/></connectionStrings>
<appSettings> <add key="connectionstring" value="Data Source=Sys67;Initial catalog=DB;user id=sa;password=sa;connect timeout=30"/> </appSettings> Please Help me to sortout this ISSUe, Its very urgent please
I got Form Authentication to work, but I am getting this error sometimes. To reproduce this error consistantly is to run iisreset.exe to have a fresh start. Go to my report server login and open any report.
The page will display: The remote server returned an error: (500) Internal Server Error.
If i click "F5" to refresh the page the report will show up or if you go to another report it will work also. It is just the first time after iisreset.exe. It is very strange.
Here is my log file:
aspnet_wp!library!6!03/11/2008-15:20:36:: i INFO: Exception dumped to: c:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson aspnet_wp!library!6!03/11/2008-15:20:47:: Call to GetPermissionsAction(/). aspnet_wp!library!1!03/11/2008-15:20:47:: Call to GetPropertiesAction(/, PathBased). aspnet_wp!library!6!03/11/2008-15:20:48:: Call to GetSystemPermissionsAction(). aspnet_wp!library!1!03/11/2008-15:20:48:: Call to ListChildrenAction(/, False). aspnet_wp!library!6!03/11/2008-15:20:49:: Call to GetSystemPropertiesAction(). aspnet_wp!library!1!03/11/2008-15:20:49:: Call to GetSystemPropertiesAction(). aspnet_wp!library!a!03/11/2008-15:20:53:: Call to GetPermissionsAction(/Sentrack). aspnet_wp!library!1!03/11/2008-15:20:53:: Call to GetPropertiesAction(/Sentrack, PathBased). aspnet_wp!library!a!03/11/2008-15:20:54:: Call to GetSystemPermissionsAction(). aspnet_wp!library!1!03/11/2008-15:20:54:: Call to ListChildrenAction(/Sentrack, False). aspnet_wp!library!a!03/11/2008-15:20:56:: Call to GetSystemPropertiesAction(). aspnet_wp!library!1!03/11/2008-15:20:56:: Call to GetSystemPropertiesAction(). aspnet_wp!library!6!03/11/2008-15:20:58:: Call to GetPermissionsAction(/Sentrack/Shared Reports). aspnet_wp!library!1!03/11/2008-15:20:59:: Call to GetPropertiesAction(/Sentrack/Shared Reports, PathBased). aspnet_wp!library!6!03/11/2008-15:20:59:: Call to GetSystemPermissionsAction(). aspnet_wp!library!1!03/11/2008-15:20:59:: Call to ListChildrenAction(/Sentrack/Shared Reports, False). aspnet_wp!library!6!03/11/2008-15:21:00:: Call to GetSystemPropertiesAction(). aspnet_wp!library!1!03/11/2008-15:21:00:: Call to GetSystemPropertiesAction(). aspnet_wp!library!a!03/11/2008-15:21:04:: Call to GetPermissionsAction(/Sentrack/Shared Reports/Report). aspnet_wp!library!1!03/11/2008-15:21:04:: Call to GetSystemPropertiesAction(). aspnet_wp!library!a!03/11/2008-15:21:05:: Call to GetPropertiesAction(/Sentrack/Shared Reports/Report, PathBased). aspnet_wp!library!1!03/11/2008-15:21:05:: Call to GetSystemPermissionsAction(). aspnet_wp!library!a!03/11/2008-15:21:06:: Call to GetPropertiesAction(/Sentrack/Shared Reports/Report, PathBased). aspnet_wp!library!1!03/11/2008-15:21:06:: Call to ListEventsAction(). aspnet_wp!library!1!03/11/2008-15:21:07:: Unhandled exception was caught: System.Web.HttpException: File does not exist. at System.Web.StaticFileHandler.ProcessRequestInternal(HttpContext context) at System.Web.DefaultHttpHandler.BeginProcessRequest(HttpContext context, AsyncCallback callback, Object state) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) aspnet_wp!library!1!03/11/2008-15:21:07:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Web.HttpException: File does not exist. at System.Web.StaticFileHandler.ProcessRequestInternal(HttpContext context) at System.Web.DefaultHttpHandler.BeginProcessRequest(HttpContext context, AsyncCallback callback, Object state) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) --- End of inner exception stack trace ---
Hi,I need some help. I am getting this error after I complete the asp.net register control and click on the continue button. It crashed when it tries to get it calls this Profile property((string)(this.GetPropertyValue("Address1")));When I look at the stack, it is coming from my ProfileWrapper class which adds user address, city, etc.. from a class which inherits fromSystem.Web.Profile.ProfileBase. From the stack, it is calling the System.Web.Profile and crashed when it tries to open a connection atSystem.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject). I already migrated all aspnet_user, aspnet_roles, etc.. and don't get any connection errors. It is only when I try to get the profile data. This works on my pc, but throws an error on my lunarpage website.Any help is greatly appreciated.Thanks,AJAn error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:Line 100: public virtual string Address2 {Line 101: get {Line 102: return ((string)(this.GetPropertyValue("Address2")));Line 103: }Line 104: set {Source File: c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files oot 021d50639a6858cApp_Code.54nvluyo.1.cs Line: 102Stack Trace:[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +435 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +782 System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428 System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +404 System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117 System.Configuration.SettingsBase.get_Item(String propertyName) +89 System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36 System.Web.Profile.ProfileBase.get_Item(String propertyName) +68 System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4 ProfileCommon.get_Address2() in c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files oot 021d50639a6858cApp_Code.54nvluyo.1.cs:102 ProfileWrapper..ctor() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileWrapper.cs:242 ProfileDataSource.GetData() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileDataSource.cs:17[TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29 System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.FormView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.FormView.EnsureDataBound() +163 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.FindControl(String id, Int32 pathOffset) +21 System.Web.UI.Control.FindControl(String id) +9 CustomerDetailsEdit.OnPreRender(EventArgs e) in d:inetpubvhostsjavcentral.comhttpdocsUserControlsCustomerDetailsEdit.ascx.cs:60 System.Web.UI.Control.PreRenderRecursiveInternal() +86 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
Facts:1. I am using my account on Godaddy trying to connect to my sql server db.2. I can get into my db using user id and password.3. Godaddy's help file shows this for a connection string: connectstr = "Driver={SQL Server};SERVER=" & db_server & ";DATABASE=" &db_name & ";UID=" & db_username & ";PWD=" & db_userpassword4. My connection string: "Server=whsql-v09.prod.mesa1.secureserver.net;uid=dbasolutions;pwd=***;database=DB_87972;" & _ "Trusted_Connection=False providerName=System.Data.SqlClient"{password **** out}5. Get error message An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I tried to email Godaddy's help desk with this information. There first response: We do not allow remote connections to our sql server database.There second response was to read the help file!Does anybody have any suggestions? Thanks in advance,bswanson
DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.CREATE PROCEDURE [dbo].[spu_Import_Export_Image](@srvr varchar(50),@db varchar(50),@usr varchar(15),@pwd varchar(50),@tbl varchar(50),@col varchar(50),@mod varchar(1),@imgpath1 varchar(1000),@pk varchar(50))ASBEGINdeclare @path varchar(50)declare @whr varchar(200)declare @fil varchar(100)declare @cmd varchar(1000)declare @imgpath varchar(800)declare @ext varchar(5)--declare @pk varchar(50)declare @KeyValue varchar(8000)declare @image varchar(50)--declare @imgpath1 varchar(1000)declare @imgpath2 varchar(1000)declare @sellist varchar(2000)set @path = 'c: extCopy.exe'select @sellist = 'DECLARE curKey CURSOR FOR SELECT ' + @pk +' FROM '+ @tbl + ' ORDER BY ' + @pkexec (@sellist)OPEN curKeyFETCH NEXT FROM curKey INTO @KeyValueWHILE (@@fetch_status = 0)BEGINset @whr = '"where '+ @pk +' = "' + @KeyValueset @fil = @imgpath1 + '' + @KeyValue --+ @extset @cmd = @path + ' /S ' + @srvr + ' /D ' + @db + ' /U ' + @usr+ ' /P ' + @pwd+ ' /T ' + @tbl + ' /C ' + @col + ' /W ' + @whr + '/F ' + @fil+ ' /' + @modexec Master..xp_cmdShell @cmdFETCH NEXT FROM curKey INTO @KeyValueENDCLOSE curKeyDEALLOCATE curKeyENDGOAbove srcipt runs fine with image data type in one table but when irun for some other table it gives me Error MessageTEXTCOPY Version 1.0DB-Library version 8.00.194SQL Server 'WSQL01' Message 170: Line 1: Incorrect syntax near '99'.(Concerning line 1)DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.ERROR: Could not use database 'test1'NULL-----------Aslo it only runs on server console if i run it from workstation uingsame files and tables it gives me an error again. Can anybody help meand reply me at Join Bytes! asap.thnx,dharmesh
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: