I have been having some trouble. I am new to this and am having issues when I am running aspnet_regsql always getting the error:
System.Web.HttpException: Unable to connect to SQL Server database. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)...
my question is how do I change the default settings to allow it to run?
hi... I want to Create an Application Service Database for SQL Server, SqlWebEventProvider, and i am trying to write in command line: c:>C:WINDOWSMicrosoft.NETFrameworkv2.0.50727aspnet_regsql.exe -U user -P pass -S sqlserversqltest -A w i get the following error: The argument 'sqlserversqltest' is invalid. why is that? do i have to use the following flags: -ssadd -sstype t ? and, how is the right way to do this...? thank you...
Hi, It seems everytime I create a new project, I have to run aspnet_regsql to map the database to my application, otherwise, there'll be errors when trying to connect to SQL in my application. My question is, is this a norm? To be executing this procedure everytime I create a web application?
I'm using aspnet_regsql to run the ASP.NET SQL Server Setup Wizard. On the page titled "Select the Server and Database", there is a drop-down list of database names I have used. Is there a way to delete the names in that list that I no longer want?
I am trying to run aspnet_regsql to set up the membership tables on this SQL 2005 server. It’s a new installation of SQL 2005, using "SQL Server and Windows Authentication mode" Security. I followed the directions at http://support.microsoft.com/default.aspx?scid=kb;EN-US;914277 to enable remote connections, enabling the browser service, and opening the firewall. Under SQL Server Configuration manager, I see the protocols for Shared Memory, Named Pipes, and TCP/IP are enabled. Also the Services SQL Server, Server Agent, and Server Browser are automatically running. But when I run aspnet_regsql I get the error: Unable to connect to SQL Server database (because of error 40 – could not open a connection to SQL Server). What else could be needed to allow this connection?
I need to setup some asp security databases and I have seen several sets of instructions. Some say "Navigate to C:WINDOWSMicrosoft.NETFrameworkv2.0.50727" and some say at the "asp command box". I do know that the directory & file exists on my machine. I have run aspnet_regsql.exe to configure my local server. I now need to run it to configure my web host SQL Server 2005 and that requires some paramaters like "aspnet_regsql.exe -S [DB Server Name] -U [DB login] -P [Password] -A all -d [Database name]". I am old and started before windows. I know DOS. But obviously not well enough. How do you "Navigate to C:WINDOWSMicrosoft.NETFrameworkv2.0.50727"? If I say "CDWINDOWS", it works. When I am at the "C:WINDOWS>" prompt and say "CD Microsoft.NET" it says "invalid directory" When I am at the "C:>" prompt and say "CDWINDOWSMicrosoft.NET" it says "invalid directory" When I am at the "C:>" prompt and say "CDWINDOWSMicros~1" it says "invalid directory" Thanks for your help. John Brown
I have been reading on aspnet_regsql.exe tool and still haven't found my answer. So here we go... I am using VWD Express and I have already made many pages in many dbs within the app folder. My question is how do I use the aspnet_regsql.exe tool to know what DB that I want the tool to know AND how do I put in the name of the DB on my sql hosting server? For instance:Let say in my app folder I have a DB named testDB.mdf and my hosting sql server is named sqlHostingServer... so if I use the command line entry in accordance with the documentation, it should look like this (in the dos prompt):aspnet_regsql.exe -E -S localhost -d testdb.mdf -A all -sqlexportonly c:output.sqlbut it seems that for the DB name I can put anything I want and still gives me output... wtfark... any help? I don't work at Microsoft so please simple documentation or something like that.Thanks,MR
Hi! How can configure a SQL2005 Express database file (.mdf) for application services (memberships, role management ...)? aspnet_regsql accepts only databases, but not with individual database files. It would be important for me to have all data of a single application be stored in a separate file, hereby it would be easier to copy data to a remote host. Currently I copy ASPNETDB.mdf to the host, but it contains (membership and role management) data for every application created on my machine. Szabolcs
Does anyone know what aspnet_regsql.exe requires to run stand-alone? I have to apply the .NET 2.0 Management/Role API to a sql2000 database on a machine that does not have the .net 2.0 framework installed.
Hi, I want to bring in Database Cache Dependency for my WebApplication. For that, I learned that the first step is settingup database for notifications when database/tables change. And I see it explained to use Aspnet_regsql. But I do not have it in my C:WindowsMicrosoft.NETFrameworkv1.1.4322 folder. Any help ? Thanks in advance.
Im trying to setup a SQL server 2000 database to use membership & roles. Running aspnet_regsql.exe gives me the following errorsSetup failed.Exception:An error occurred during the execution of the SQL file 'InstallCommon.sql'. The SQL error number is 515 and the SqlException message is: Cannot insert the value NULL into column 'Column', table 'tempdb.dbo.#aspnet_Permissions_________________________________________________________________________________________________000000008000'; column does not allow nulls. INSERT fails.Warning: Null value is eliminated by an aggregate or other SET operation.The statement has been terminated.----------------------------------------Details of failure----------------------------------------SQL Server: Database: [AddressVerification]SQL file loaded:InstallCommon.sqlCommands failed:CREATE TABLE #aspnet_Permissions( Owner sysname, Object sysname, Grantee sysname, Grantor sysname, ProtectType char(10), [Action] varchar(20), [Column] sysname)INSERT INTO #aspnet_PermissionsEXEC sp_helprotectIF (EXISTS (SELECT name FROM sysobjects WHERE (name = N'aspnet_Setup_RestorePermissions') AND (type = 'P')))DROP PROCEDURE [dbo].aspnet_Setup_RestorePermissionsSQL Exception:System.Data.SqlClient.SqlException: Cannot insert the value NULL into column 'Column', table 'tempdb.dbo.#aspnet_Permissions_________________________________________________________________________________________________000000008000'; column does not allow nulls. INSERT fails.Warning: Null value is eliminated by an aggregate or other SET operation.The statement has been terminated. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at System.Web.Management.SqlServices.ExecuteFile(String file, String server, String database, String dbFileName, SqlConnection connection, Boolean sessionState, Boolean isInstall, SessionStateType sessionStatetype)Ive run this many times on other servers and have never come across this problem before. Has anyone else ? Does anyone know the cause and if there is a fix ??** I am logged in with full admin privaliges tiaMark.
I've been using SQL Serer 2000 or SQL Server 2005 (external) for my website and I have it configured through the aspnet_regsql tool. The hosting company doesn't offer access to SQL Server to configure the database. So I thought I'd use SQL Express. Only problem is now I can use the exe to set up this db.
Does anyone know of a good way to configure this database for my website?
i already ran aspnet_regsql but i still get below...anyone know why? thanks in advance
Could not establish a connection to the database. If you have not yet created the SQL Server database, exit the Web Site Administration tool, use the aspnet_regsql command-line utility to create and configure the database, and then return to this tool to set the provider.
I just ran the utility without any commands ant the wizard has come up. This is all independent of my web application.I am guessing this is going to install the database tables to my existing database. UPDATE: They have been createdWill I then connect my web app to this database schema that is created?How do I change the membership/roles users in my web app to point to the database tables?
I installed ASPNETDB with the standard script, but then learned it was possible to integrate this membership db into my existing db (haven't done this yet, but will tomorrow then I'll delete the auto-created ASPNETDB for clarity).That's Great. Now.....I'm not sure the best way to tie this information into with my existing data. I assume I should use the UserID field but how should I do it? Should I update my existing customers table with a copy of the UserID value upon creation? If so, how do I do that? I can create the relations between whichever tables, but I am curious as to your recommended method.Thanks for your help.jb
Hi,When I attempt to add the membership functionality to a database created within VWD Express, by using the aspnet_regsql.exe application (connecting to ./SQLEXPRESS using Windows authentication), the database I've created within VWD Express doesn't appear within the list of accessible databases. I have the same problem when attempting to access the same database within Management Studio Express.Does this mean that databases created from within VWD Express don't use the same storage mechanism or paradigm as those already available within Management Studio Express? Or perhaps I need to somehow register the database using Management Studio Express? As a side note, I'm not sure if the "File/Open File" menu option within Management Studio Express holds the answer to my problems, but rather bizarrely, it crashes Management Studio Express when I select it.Apologies for the rambling - in essence my question is "How can I make databases created within VWD Express appear within aspnet_regsql.exe and/or Management Studio Express?"Many thanks,Jon
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit): Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,) <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI) MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,) MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close) MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2 <Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 Gathering darwin properties for failure handling. Error Code: 2 MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
I cannot execute a package by using Execute Package task. I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
We have reports deployed in the Report Server. While connecting from client, we are getting the error "An internal error occurred on the report server. See the error log for more details. rsInternal Error)"
Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.
Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.
We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?> <ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access. I have looked where the error logs should be, but there are no error logs. I rebuilt the query as I needed to change this, but this did not help. Is there someone who could point me in the correct direction.
I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.
Today, actually half way through today, I restarted my computer after installing Photoshop Updates.
Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).
Whenever I run an web app that connects to it I get this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?
--Edit
I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.
My link server was working just fine until friday evening. It stopped worked over the week end. with and error Error 7399: OLE DB provider 'MSDAORA' reported an error. OLE DB error .
---my oracle 10g client is working just fine --TNS names looks fine ---i recreated the link but i am still getting the same error.
I need your help because a lot of jobs are using that link on Monday it is going to be crazzzy.
We have a production SQLServer 6.5 running with service pack SP5a update:
I got the following 2 errors.....
1.
Error : 806, Severity: 21, State: 1 Could not find virtual page for logical page 67833121 in database 'tempdb' database 'tempdb'
2.
I got error when I ran a job for Update statistics Error : 614, Severity: 21, State: 3 A row on page 2697653 was accessed that has an illegal length of -8631 in database 'abc'.
For Error 2: I ran update statistics using query analyser. It is fine Is there anything I have to do further?
For Error 1 : The work around given by Microsoft ================================================= I ran DBCC CHECKTABLE(syslogs)
I am getting the following message on : master: Checking syslogs The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 11 data rows. DBCC execution completed. If DBCC printed error messages, see your System Administrator.
model: Checking syslogs The total number of data pages in this table is 47. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 532 data rows. DBCC execution completed. If DBCC printed error messages, see your System Administrator.
tempdb:
Checking syslogs The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 31 data rows. DBCC execution completed. If DBCC printed error messages, see your System Administrator.
I ran dbcc checkdb on master,model and tempdb . Still I get the same problem.
for tempdb:
Checking 8 The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 19 data rows.
for master: Checking 8 The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 27 data rows.
for model: Checking 8 The total number of data pages in this table is 47. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 532 data rows.
All system databases and userdatabase recovered successfully when I restarted sqlserver.
Hi, I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE. I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.
I am performing below operations for that. Step : 1 Pull To Mobile
Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);
Step : 2 Using one device form i am updating table "ItemMaster" table's values.
So i am getting an error on 3rd step. While i am trying to push it says, "The Push method returned one or more error rows. See the specified error table. [ Error table name = ]". I have tried it in different ways but still i am getting this error.
Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.
Can any one help me?I am trying for that since last 3 days.
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
