Error 403 And Unable To Connect Error.

Dec 20, 2006

First Error:

I am currently trying to get my reporting services to run on a site other than the default website... on my test server are three sites listed in my IIS: Default Web Site, Microsoft Share Point Administration, and Data Test Site.

My ReportingServer and Reports directories run fine in my Local Web Site but when i add the Directories to my Data Test Site only the Reports Directory runs... the ReportServer does not run and gives me :




You are not authorized to view this page

You might not have permission to view this directory or page using the credentials you supplied.




If you believe you should be able to view this directory or page, please try to contact the Web site by using any e-mail address or phone number that may be listed on the 192.168.1.249 home page.
You can click Search to look for information on the Internet.



HTTP Error 403 - Forbidden
Internet Explorer

Second Error:

I was trying to fix the problem above and i do not think i changed anything i was just looking through the settings between the two sites and somehow this error came up:














Error























The underlying connection was closed: Unable to connect to the remote server.



Home

I am not sure what i did or if i even did anything i was just looking through the settings. compairing the two sites and now i get the error above.

View 1 Replies


ADVERTISEMENT

Unable To Connect To SQL Server 2005 (error: 26 - Error Locating Server/Instance Specified)

Jun 5, 2007

I've installed SQL2005 on a server already running SQL2K on my laptop. SQL2K is the default instance, so I'm trying to connect to SQL2005 using MYSERVERSQL2005 as the instance.

The steps that I've taken are to apply SP2 and enable remote connections (TCP & Named pipes). I've also made sure the SQL Server Browser service is running and enabled.

The error message that I get via SQL2005 client tools is "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"

I dont understand as to why i am unable to connect to 2005.

Any ideas?

View 4 Replies View Related

Unable To Connect TCP/IP Error

Apr 23, 2008

Hi

I am trying to connect to SQL Server Managements Studio. However, I am encountering connection problems. Please help....

Error...

TITLE: Connect to Server
------------------------------

Cannot connect to MSSQL1.

------------------------------
ADDITIONAL INFORMATION:

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476

------------------------------
BUTTONS:

OK
------------------------------


Raj.

View 6 Replies View Related

Unable To Connect With Local Db Though My Asp.net App, Error: 40

Oct 23, 2006

Hi all,I having problems connecting to my local database through my asp.net site. I'm able to connect to the database using Query Analyzer with the following connection properties:Server: localSql Server Authentication: checkedUser Name: saand the Password is left blankThis is the connection string i'm using on the website:Data Source=local;Initial Catalog=myDatabaseName;User ID=sa;Password=;This is the error i'm getting:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Any suggestions appreciated.Thanks

View 1 Replies View Related

Unable To Connect In Sql Server 6.5 Error

Jan 23, 2004

I have loaded NT4 onto a machine with 256MB's of ram. I have put on SP6 and the hard drive is 80GB's in size. I then loaded in SQL Server 6.5 and set up my default database at 250MB's in size. I can ping all other computers on the network and they can ping me but when I try to register the database it give me a unable to connect error. This is the 10004 error. The error is Execomm and it says the DBPROCESS is dead. I guess thats cause it won't connect. The Sqlserver is running and so is the sqlexecutive running.

Help, Help, Help.

TIA

View 4 Replies View Related

Unable To Connect To Server - Error 26

Feb 8, 2006

I am getting the following error:

Unable to connect to server. Reason: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)



Also, I am running the Upgrade advisor from my machine (SQL 2000) and trying to access the SQL 2000 db on another machine. So I do not have SQL 2005 in any machine.

Can anyone tell me whts wrong.

Pls Advice!!

Thanks

View 3 Replies View Related

Error: Unable To Connect To Server 'servername'

Apr 29, 2008

Hi,

I am trying to connect to SQL Server through Query Analyzer but getting following error: (SQL Server is at remote web server where i have my website hosted.)

Unable to connect to server [server IP]:

Server: Msg 6, Level 16, State 1
[Microsoft][ODBC SQL Server Driver][dbnetlib] Specified SQL server not found.

I have searched this forum for this error and performed following workaround as suggested in some threads-

1. checked and set "TcpPort" registry setting.
2. TCP/IP is enabled in Network Utility.
3. "start SQL server if it is stoped" checkbox is unchecked while connecting.

But, I am still getting the above error. Should i re-installed SQL Server 2000? Any help?

Thanks,

View 3 Replies View Related

Query Analyzer. Error : Unable To Connect To Debugger

Jul 23, 2005

MS SQL Server 2000 SP3Windows XP SP2Error when try to debug in Query Analyzer:Server: Msg 504, Level 16, State 1, Procedure sp_sdidebug, Line 1[Microsoft][ODBC SQL Server Driver][SQL Server]Unable to connect todebugger on HORNET (Error = 0x80070005). Ensure that client-sidecomponents, such as SQLDBREG.EXE, are installed and registered onEUGENE. Debugging disabled for connection 63.Tried:- 'Troubleshooting the Transact-SQL Debugger' ( Book on-line )- EXEC ... 'legacy_on'- firewall is disabledWhat else can be done ?Thanks , Eugene

View 1 Replies View Related

Unable To Connect To SQLEXPRESS From A Client In A Workgroup (Error 40)

Jul 11, 2007

Hi to everyone!

Here is my problem: I have SQLEXPRESS running with Windows Authentication on a "server" PC named "ASUS1", and I need to connect from a "client" PC named "Presario1", user "Mauro", connected through a peer network (I use a cross-over cable); both PCs belongs to the same workgroup named "RMT-WORK", and they can see each others shared folders without problems.

I have installed the connectivity components + Management Studio Express on Presario1, and enabled named pipes and TCP/IP protocols; then I've got SQL Browser running. I have also added the Login "Guest" on ASUS1SQLEXPRESS.

When I start Management Studio Express on Presario1 and browse for servers I can select "ASUS1" as database engine but when I try to connect I receive "Error 40: could not open a connection to SQL Server" (same result using SQLCMD); I have tried to add on ASUS1SQLEXPRESS a user "Presario1Mauro" with "CREATE LOGIN [Presario1Mauro] FROM WINDOWS" but I receive a "Windows user not found" error...

Can anyone help me?

View 6 Replies View Related

SQL 2005 - Upgrade Advisor Error - Unable To Connect

Apr 15, 2006

Unable to connect to server. Reason: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)

View 2 Replies View Related

Unable To Remote Connect, SQL Server, Error: 1326

Nov 18, 2006

SQL Express running on Server 2003 SP1, not a domain controller - but prior to installing SQL Express, I did dcpromo promote and then demoted it back to a workgroup server.

Connecting with Vista build 5600, Studio express 9.00.2047 with MDAC 6.00.5600.1638. Server 2003 MDAC is 2.82.1830.

I came across this article on the net:

http://www.developersdex.com/sql/message.asp?p=1867&ID=%3C309C7496-F36B-4398-9C52-322E6CB8DE3B%40microsoft.com%3E

Is my mis-matched versions of MDAC causing me this grief?

Otherwise, I have remote set up for TCP and Named Pipes, I've run sp_configure 'remote admin connections', 1; my login is set to SQL Authentication with everything granted. I've tried running the service as network, local and MachineAdministrator; ports are open per:

http://support.microsoft.com/kb/555585

I wanted to ask before I start replacing the MDAC on either the Vista or Server 2003 machine... If that's the problem, which version(s) do I change? to?

Full error message:

An error has occurred while establishing a connection to the server. While connecting to SQL Server 2005, this failure may be cuased by the fact that under the default settings SQL Server does not allow remote connecitons, (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 1326)

Thanks, John



View 7 Replies View Related

Just Started Getting This Error When Trying To Connect To SQL From ASP.NET--error: 26 - Error Locating Server/Instance Specified

Apr 3, 2007

This has worked fine for weeks, and months.

I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.

Today, actually half way through today, I restarted my computer after installing Photoshop Updates.

Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).

Whenever I run an web app that connects to it I get this error:


An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?

--Edit

I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.

View 1 Replies View Related

Query Analyzer Error Unable To Connect Server Local Msg17, Level 16,state 1/ODBC SQL Server Driver [DBNETLIB]SQL Server Does Not

Oct 20, 2007

I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist

View 6 Replies View Related

Working Since Morning, Simple Error But Unable To Resolve, ERROR : 26 , Please Help

Dec 15, 2006

dear friends,
 i started using Asp.net for developing webparts, web parts automatically connect to a database to be created and saved in the database.
i had already Sql Server 2005 Express Edition installed so my webpart page ran and automatically created the database "AspNetDb" in the "App_Data" folder.
but when i uninstalled Sql Server 2005 Express Edition and then installed the Sql Server 2005 Enterprise Edition, it gave me the following Error 26 as below :

--------------------------------------------------------- Beginning of Error Message -------------------------------------------------- 
 An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:

If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
--------------------------------------------------------- End of Error Message -------------------------------------------------- 
then when i checked the Machine.config file, i found this....
  <connectionStrings>    <add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" />  </connectionStrings>
then i thought it's becoz, of the datasource thing that the Machine.Config file supports by default the default free edition of Sql Server 2005 which is the Sql Server 2005 Express Edition.
but friend in my company we use Sql Server 2005 Enterprise Edition, so can anybody pls guide me and get me out of this soup on helping me to use Sql Server 2005 Enterprise Edition by modifying either 1) Machine.Config File and/or  2) Web.Config file and/or 3) any other way, but please help i want to do this, please......
regards and thanks
Gurjit Singh 

View 2 Replies View Related

I Got Error When I Connect Remotly Or From Other Computer And Also Gettting This Error : Cannot Use Special Principal 'sa'

Nov 1, 2007

Hello,
The problem which i am facing in SQL Server 2005 is that, I have 2 database and the owner of both the databases is sa but when I go to database > security > users here I cannot find 'sa' as user. when I am going to add that user I get following error :
cannot use special principal 'sa'

also when I connect sa on other computer I will not connect

I have already checked following thing :
The Authontication mode of SQL is mixed mode
database owner is also sa
sa is also enable


Please can any one help me I am in big trouble


Thanks and Regards
Asif Fattah
ERP Consultant

View 4 Replies View Related

Named Pipes Provider, Error: 40 - Could Not Connect; Error 2

Aug 15, 2007

I have installed MSSQL 2005 successfuly, checked the services their are running I can connect to the
server with Intergrations Services ok. I get the following when I try to connect to the Database Engine

(provider: Named Pipes Provider, error: 40 - Could not
open a connection to SQL Server) (Microsoft SQL Server, Error: 2)


What file is SQL looking for (net helpmsg 2)?

Thanks for the help

View 4 Replies View Related

SQL Error - Unable To See Tables - Help!

Jan 11, 2002

Hello,

I am getting the following error message when trying to return rows from a table:

The query cannot be executed because some files are either missing or not registered. Run setup again to make sure the required files are registered.

Can anyone tell me how to fix this? I am running SQL Server 2000 on Windows 2000 Advanced Server, SP 2, SQL Server SP2.

TIA,

Chris

View 2 Replies View Related

Unable To Install Error Message

Dec 15, 1998

I just downloaded the release version of SQL 7.0 Enterprise Edition from the MSDN web site. When I tried to install it I received the message:
"The Enterprise Edition server component cannot be installed on Windows NT Server using this CD. Only client components will be available for installation."

I have NT SP4 and IE SP1 installed. Any ideas on what I need to do to get this installed? I've read the books online and don't see any prerequisites other than NT SP4 and IE SP1.

View 1 Replies View Related

MDX Error - Unable To Open Cellset

Dec 18, 2007

Hopefully I am in the right forum :o

I am trying to run the following mdx query:

SELECT
{
([Location].[Code],
[Measures].Quantity)
}
ON COLUMNS,
{FILTER (
CROSSJOIN (
[Manufacturer].MEMBERS, [Item].MEMBERS),
(([Measures].[Quantity]) <> 0))} ON ROWS
FROM
[Stockbalance]

But, I have encountered the error:
Unable to open cellset
Formula error - cannot bind: unknown dimension or member: "[Location].[Code]"

This is my first query using mdx. -_-' Appreciate if someone could help me out.:beer:

Also, what I am hoping to do:

Location1 Location2
Manufacturer Item Desc Qty Qty

View 1 Replies View Related

Error 262 Unable To Create Database...

Jun 1, 2008

Hi

I am a complete newbie here. I have spent hours trying to create a database - (even installed on XP and Vista) and I seem to not be able to create a database - it tells me that:

Create Database permission denied in database master - Microsoft SQL Server Error 262.

How to I enable these priviledges?

Do i need to regsiter the Server with the Enterprise Manager and how do I do that?

All help VERY gratefully received thanks Lister

View 2 Replies View Related

Unable To Open The Event Log Error

May 18, 2007

I got this error message from the sql agent log file:

05/18/2007 02:14:10,,Error,,,,,,[LOG] Unable to read local eventlog (reason: The parameter is incorrect),,,,,,,

How to solve this problem?



Thanks



April

View 3 Replies View Related

Help - Error: Unable To Open The Physical File

May 17, 2007

Hi, I've just finished creating my first ASP.NET website. I created it on my laptop and it works perfectly, but I'm having some problems deploying it to my web server (PC).The site works ok, but when I try to log in to my client area, I get this error:
"Unable to open the physical file "c:inetpubwwwrootONeillStrataApp_Dataaspnetdb.mdf". Operating system error 5: "5(Access is denied.)".An attempt to attach an auto-named database for file c:inetpubwwwrootONeillStrataApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."
I've searched far and wide for a solution and have read many articles, but none seem to be able to fix my problem. I've tried using that SEUtil tool, but that didn't work, I've made sure the App_Data directory on the web server isn't read only (the read-only checkbox isn't ticked, but it DOES have that little green square which I can't get rid of), I've assigned the ASPNET user as a db owner and that didn't work and I've manually attached the database to the web server's instance of SQL Express 2005.When I launch the solution in VS2005 on the web server, I can browse through the database and see the tables and data etc, but when I try to run the application, I get that message above...
Surely it shouldn't be this hard to get it going?Any help would be massively appreciated.

View 2 Replies View Related

Unable To Browse The Cube '????', Unspecified Error.

Sep 27, 2002

Hi,

I have processed the data successfully for the cube after desiging storage as MOLAP with 50% performance gain. When I tried browse the data I am getting the followign error.

Unable to Browse the cube 'cubename', Unspecified error.

Any help please.

Regards
John Jayaseelan

View 3 Replies View Related

Error = [Microsoft][SQL Native Client]Unable To Op

May 2, 2008

As long as the output file is written to the local client, it completes successfully. But after changing the UNC path to another server with or without fully qualified names it is unable to open BCP host data-file. (sample shown below)
-----------------------------------------------------------------
DECLARE @FileNamevarchar(2000),
@bcpCommandvarchar(2000)

SET @FileName =REPLACE('\stladminy_drive ransfer
maffrandauthors_'+CONVERT(char(8),GETDATE(),1)+'.txt','/','-')

SET @bcpCommand ='bcp "SELECT * FROM FKIAcctReceivable.dbo.PurchaseOrder" queryout "'
SET @bcpCommand =@bcpCommand + @FileName + '" -T -c'

EXEC master..xp_cmdshell @bcpCommand

---------------------------------------------------
xp_cmdshell has been enabled and the user has sysadmin rights.

Anybody have the same problem and willing to help?

View 3 Replies View Related

Unable To Create Object Error In Sp_SendSMTPMail

Jul 20, 2005

Hello,I am attempting to send emails using T-SQL (in a SQLServerAgent Job)using the stored procedure sp_SendSMTPMail. I created the stored procusing the following script that I got off a post here on google.CREATE PROCEDURE sp_SendSMTPMail (@From varchar(255),@To varchar(8000),@Subject varchar(255),@Body varchar(8000),@cc varchar(8000) = NULL,@Bcc varchar(8000) = NULL)ASDECLARE @newmail intDECLARE @result int-- Create the CDONTS.Newmail objectEXEC @result = sp_OACreate 'CDONTS.NewMail', @newmail OUTIF @result <> 0BEGINPRINT 'Error creating object'EXEC sp_displayoaerrorinfo @newmail, @resultRETURNEND-- Check the Optional PropertiesIF not @cc = NULLBEGINEXEC @result = sp_OASetProperty @newmail, 'cc', @ccIF @result <> 0BEGINPRINT 'Error setting [cc] property'-- EXEC sp_displayoaerrorinfo @newmail, @resultRETURNENDENDIF not @Bcc = NULLBEGINEXEC @result = sp_OASetProperty @newmail, 'Bcc', @BccIF @result <> 0BEGINPRINT 'Error setting [Bcc] property'-- EXEC sp_displayoaerrorinfo @newmail, @resultRETURNENDEND--set the non-optional propertiesEXEC @result = sp_OASetProperty @newmail, 'From', @FromEXEC @result = sp_OASetProperty @newmail, 'To', @ToEXEC @result = sp_OASetProperty @newmail, 'Subject', @SubjectEXEC @result = sp_OASetProperty @newmail, 'Body', @Body-- Send the message...EXEC @result = sp_OAMethod @newmail, 'Send'IF @result <> 0BEGINPRINT 'Error sending message'-- EXEC sp_displayoaerrorinfo @newmail, @resultRETURNEND-- Destroy the object.EXEC @result = sp_OADestroy @newmailIF @result <> 0BEGINPRINT'Error destroying object'-- EXEC sp_displayoaerrorinfo @newmail, @resultRETURNENDGO______________________________________________This worked perfectly in testing at our office but when we shipped tothe client it produced the error 'Error creating object'. We sent theclient the script to create the sp_displayoaerrorinfo proc and got thefollowing error message.Error creating object-2147221005OLE Automation Error InformationHRESULT: 0x800401f3Source: ODSOLE Extended ProcedureDescription: Invalid class stringNow this suggested to me that the for some reason we were unable toreference the CDO library, or it wasn't installed. However they haveOutlook 2000 installed with CDO installed with it. I've had had themremove and reinstall the CDO library but that hasn't helped.Other thing I though of was a permission type problem. They are usingNT authentication for there logins into SQL server and are logged onthe server as Administrator who I would assume has all requiredpermissions.Any suggestions for either determining the cause of them problems or asolution?Thanks in advance.Bob.

View 3 Replies View Related

SSIS Error: Unable To Cast COM Object

Oct 10, 2007

Hi,

I get the following error opening an existing (or working) ssis package on my new server.

Error loading 'TestExecutionFromScript.dtsx' : Unable to cast COM object of type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.PackageNeutralClass' to interface type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSContainer90'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{8BDFE892-E9D8-4D23-9739-DA807BCDC2AC}' failed due to the following error: Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED))..

I found in a blog that this is caused due to a dll which is not registered ("DTS.dll")

Can anyone try to explain the exact reason for this? I am not even able to execute a package from the command prompt using the dtexec utility. I have "Microsoft SQL Server Analysis Services Designer Version 9.00.3042.00" on my server. My other machine which executed this package successfully was running "Microsoft SQL Server Analysis Services Designer Version 9.00.1399.00".

Thanks very much for any kind of help.

View 3 Replies View Related

Error 26 - Followed The Guidelines, Still Unable To Make It Work

Nov 7, 2007



Good Morning, I've been searching through all the tutorials and questions, have tried many things. I am still getting "[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]"

as an error. This is what I've got:

I€™m using SQL Server Express 2005, installed with the default settings. Had not touched this program for anything until I started to follow directions to fix Error 26. Visual Web Developer Express ASP.NET is what I€™ve used to build the webpage. I was using the ASP.NET web configuration to add users to the database, which is set to use the provider ASPSqlServerProvider.
SQL Server 2005 Surface Area Configuration
Database Engine Remote Connections €“ set to €śLocal and Remote Connections €“ Using TCP/IP Only€?
SQL Server Browser is Enabled and Running
- is set to Active, under Built In Account €“ Network Service
I have created Windows firewall exceptions for:
sqlservr.exe
sqlbrowser.exe
udp port 1434
SQL Server Configuration Manager
both SQL Server and SQL Server Browser are running.
Under SQL Server 2005 Network Configuration
Shared Memory and TCP/IP are enabled only.

SQL Native Client Configuration
Shared Memory 1
TCP/IP 2
Named Pipes 3
all enabled

I read through the post at http://blogs.msdn.com/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx but as I'm new to SqlServer I do not know how to check on the first three items.

I'm getting extremely frustrated, and would just like the login portion of this website to start working before my boot ends up through the computer. Please help, lol, thank you.

View 9 Replies View Related

Error: Unable To Load One Or More Of The Requested Types.

May 3, 2005

When I'm trying to deploy a SQLCLR assembly , I get the following error:

View 7 Replies View Related

Unable To Add Witness To DB Mirror Error 1456

May 9, 2007

I can establish the mirror with the principal and mirror but cannot add the witness (error 1456) all machines are SQL Server 2005 standard edition service pack 2 principal and mirror are windows server 2003 and witness is windows xp

View 20 Replies View Related

Unable To Access Report Sever Error

Mar 23, 2007

Hi,
We are facing a problem while trying to access the report server. When I try to access reports homepage "http://servername/reports", I get following error "Unable to communicate with report server.
Please verify that the report server is operational."
I have not touched report server config file.
I noticed that the problem can be temporarily fixed, if I disconnect remote connections (mstsc) to above server machine, which are idle for 2-3 days. Then the report server works fine.
But I don't see any link between mstsc connections to server machine and report server problem.
I think, it might be some memory issue, can somebody tell me how to fix this problem ?
I am getting calls from my office in the middle of the night to fix this error..!!!!!
I want permanent solution !


Thanks,
Prashant

View 5 Replies View Related

Connect To DB Error

Jan 25, 2008

Hi All,
 I ge this error I am frustrated. Could anyone help? Thanks
 My DB file located at: c:mywebeskApp_DataECommerceDb.mdf
My connectionstring in web.config:
<remove name="SQLConnectionString"/>
<add name="connectionstring" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ECommerceDb.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/>
 This is the errors I get:
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'sotee-PCsotee'.Source Error:



Line 118: {
Line 119: cmd.CommandType = CommandType.StoredProcedure;
Line 120: cnn.Open();
Line 121: }
Line 122: return cmd.ExecuteReader(CommandBehavior.CloseConnection);Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
 

View 5 Replies View Related

Connect Error??

Mar 19, 2004

I'm check a User and Pass is correct. Why
I can't connect to Mssql2000 by IIS is WebServer.I'm use PHP script to connect
What happen to my sql or I forgot to change something befor I'm runing a script?
Anyone can explain me please?

View 3 Replies View Related

JSP Connect To MS SQL DB Error

Mar 7, 2005

Dear All,

Please advise for what should I do as i got the error by connnecting to the MSSQL Server (Local PC) when a page is try to connect to the MSSQL DB server

[3/8/05 11:56:51:601 SGT] 687b8b97 WebGroup E SRVE0026E: [Servlet Error]-[com/microsoft/jdbc/base/BaseDriver]:
java.lang.NoClassDefFoundError:
com/microsoft/jdbc/base/BaseDriver

at java.lang.ClassLoader.findLoadedClass(Native Method)
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java(Compiled Code))
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:52)
at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:48)
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:279)
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:279)
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.ReloadableClassLoader.loadClass(ReloadableClassLoader.java:83)
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:255)
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at com.ibm.ws.webcontainer.jsp.servlet.JasperLoader.loadClass(JasperLoader.java:153)
at com.ibm.ws.webcontainer.jsp.servlet.JasperLoader.loadClass(JasperLoader.java:80)
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java(Compiled Code))
at org.apache.jsp._index._jspService(_index.java:152)
at com.ibm.ws.webcontainer.jsp.runtime.HttpJspBase.service(HttpJspBase.java:89)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.jsp.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:344)
at com.ibm.ws.webcontainer.jsp.servlet.JspServlet.serviceJspFile(JspServlet.java:662)
at com.ibm.ws.webcontainer.jsp.servlet.JspServlet.service(JspServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java: 42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:61)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher. java:965)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:555)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:200)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:119)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:276)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContex t.java:114)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:186)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:618)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:443)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)

Thank you

Regards,
Tommy

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved