Error 53, Remote Connections

Dec 18, 2007

Hi all

This question has probably been asked a few times on the forum but none of the answers work for my situation.

I recently installed SQL Server 2005.
When trying to connect to my server, locally, using Management studio, I get the following error:

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53).

I have already enabled remote connections in the Surface Area Configuration, using TCP/IP and pipes.
I created exceptions in the Firewall and started the Server Browser service.

Please help

Thanks

View 5 Replies

Remote Connections Enabled, But I Still Get Error That Remote Is Not Configured - Sql 2005

Aug 23, 2006

Fellow Devs,
I have an instance of SQL Server Express 2005 running on another box and I have Remote Connections enabled over both TCP/IP and Named Pipes, but on my other box I keep getting the error that the server does not accept Remote Connections.
Any ideas why this might be happening? Is there some other configuration?

View 25 Replies View Related

Remote Connections Error

Jun 2, 2007

While trying to transfer my website project to another computer I am encountering an error when tryng to run the solution. It gives me a "Does not allow remote connections". Why is this when on the original computer everything worked fine.

Walter

View 2 Replies View Related

Remote Connections Error

Feb 10, 2008

I am getting the following connection error:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)When I run the page locally on my develepment environment, the page runs fine. I'm using VS2005 and SQL Server Management Studio Express.When I upload the page to the remote server, I get the connection error indicated above.To further troubleshoot the issue, I created a simple test page with the connection string hardcoded in the code-behind and binded to a dropdownlist using the following code:SqlConnection conn = new SqlConnection("Data Source=xxx.xxx.xxx.xx;network=DBMSSOCN;Initial Catalog=TechCenter;Persist Security Info=True;User ID=xxxxx;Password=xxxxxrx;Asynchronous Processing=True;MultipleActiveResultSets=True");
conn.Open(); SqlDataReader dr; SqlCommand command = new SqlCommand("SELECT RecordID, customer_id FROM Customers WHERE recordtype <> 'F' ORDER BY customer_id ASC", conn); dr = command.ExecuteReader(); while (dr.Read()) { DropDownList1.Items.Add(new ListItem(dr["customer_id"].ToString(), dr["RecordID"].ToString())); } dr.Close(); conn.Close();When I run the test page, it works fine, so I know I'm using the correct connection string properties.When I move the connection string to the web.config file and using a dataset with a tableadapter, I get the error about the sql server not allowing remote connections? I'm stumped. I cannot isolate the cause of the error.The remote server is using sql server 2000 and error indicates it is trying to connect to SQL Server 2005??? Any help would be greatly appreciated.Thank you.

View 5 Replies View Related

Sql Server Remote Connections Error

Jun 2, 2008

Guys,

I can connect the sql server instance through management studio and I can also create a DSN to the same sql server instance. But when the application tries to establish the connection i get the following error

I have checked the following

SQL BROWSER is started
TCP/IP default port 1434 is enabled

At this point I am not sure how to proceed further to trouble shoot this issue.

System.Exception: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Any suggestions and inputs would help.

Thanks

View 2 Replies View Related

SQL Remote Connection Not Being Seen, Though Remote Connections Allowed

Oct 11, 2007

HiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks

View 3 Replies View Related

SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provider, Error: 40)

Apr 15, 2008

Hi,
My .NET 2005 application is on a server outsite company's domain. SQL server is in domain and port for sql server is open. TCP/IP is set for remote connection in SQL Server. Connection string in .config is
<add name="X_Conn" connectionString="Data Source=XXX;Initial Catalog=XXX;User ID=XX; Password=XXX;" providerName="System.Data.SqlClient"/>
I receive the error below:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
thanks a lot in advance!

View 3 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections.

Jan 22, 2008

My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:

1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.

View 4 Replies View Related

Default Settings SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provider, Error: 40 - Could Not Open A Connection To SQL Server

Jan 28, 2008

Hi I always get good reply from u all, thank you,
I have copied my asp.net website from one server to another. they administrator made necessary modification on IIS manager . and able to see the website on browser. but now i can't loging to system using old password.
I tryed to create new password then also it gives error
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here I have used asp.net login control and membership class. Do I need to make nay changes in code.
I have already modified server name in connection string in web config file.
any one can say what is the problem and how to solve this.
thanks
Pat

View 1 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: SQL Network Interfa

Dec 10, 2007

I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.

Server Error in '/RBOdev' Application.

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:

[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692

Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832

View 3 Replies View Related

This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provider, Error: 40 - Could Not Open A Connection To SQL Server)

Apr 18, 2008

Hi ,
I am struck with one issue.Plz help me out if you have any solution for this one.
Details
Front End - Visual Studio 2005
Back End -SQL Server 2000 (Remote database)
Error i am getting is
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at dbcAccess.clsSQL.GetConnect() in C:Documents and SettingskerlsgMy DocumentsVisual Studio 2005ProjectsdbcAccessdbcAccessclsSQL.cs:line 296}

{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)

View 6 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provide

Jan 24, 2008

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

View 2 Replies View Related

An Error Has Occurred While Establishing A Connection To The Server. When Connecting To SQL Server 2005, This Failure May Be Caused By The Fact That Under The Default Settings SQL Server Does Not Allow Remote Connections. (provider: Named Pipes Provide

Apr 10, 2008

Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.

View 1 Replies View Related

Remote Connections

Oct 27, 2007

Does someone have a guide or a link to a guide to allow remote connections from a default install?

Just that I'm currently testing my setup on a work laptop but not having much success but thats probably down to the network admins limiting me far too much on here.

However I am getting a new DELL machine, which I'm gonna make sure the network admins get no where near. Once I have this machine I will be forwarding port 1433 to the machine, but need to know what other changes I need to make to allow my friend access to the machine as well.

So I'd need to know what server settings I need to change and also what my friend needs to do as a client.

thanks in advance!

View 4 Replies View Related

How Can I Allow Remote Connections Using SMO?

May 20, 2008

Hi all,

I would like to enable remote connection on SQL Express 2005 using SMO.
How can I do it?

Thanks,

Assaf

View 5 Replies View Related

Remote Connections

Mar 26, 2008

Hello community

I have the following problem = /

http://img101.imageshack.us/my.php?image=asdfzv7.jpg

View 1 Replies View Related

Jan 25, 2007

when i try to add a new data connection from within Visual basic or C#, i get a 'provider: SQL Network Interfaces, error number 26 - error locating server/instance specified.

i have tried to allow remote connections through the sql configuration manager and the surface area configuration.

View 3 Replies View Related

SQL Server Does Not Allow Remote Connections

Dec 18, 2007

I've got the following error from running my aspx webpages, trying to communicate to the MSSQL 2005 database.

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Shared Memory Provider, error: 40 - Could not open a connection to SQL Server)

I've see and read a lot of chatter on the forum on the topic, but didn't find my solution. I have done a number of things, all of which didn't shake the error.
1) I went into SQL Server Surface Area Configuration for Services and Connections, and set Remote Connections to Local and Remote Connections, using TCP/IP only
2) Disabled Firewall
3) Made exceptions throught the Firewall for SQL Server and SQL Browser

Any other suggestions, thanks in advance.

View 4 Replies View Related