[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionCheckForData (CheckforData()).
Server: Msg 11, Level 16, State 1, Line 0
General network error. Check your network documentation.
The situation is this:
Client: Microsoft Windows 2003 Standard
Client s/w: Microsoft SQL Server 2000 Client Tools (patched with SP4)
Server: Microsoft Windows 2003 Standard (SP1)
Server s/w: MSDE 2000, SP3
Network:
Connection is made over a MAN through two firewalls.
Error conditions:
1. I am able to make the initial connection.
2. I am able to perform:
a. SELECT @@VERSION
b. SELECT Host_Name()
c. SELECT TOP 1 * FROM sysfiles
3. I get the error whenever I attempt to perform any multi-row recordset (such as SELECT TOP 2 * FROM sysfiles).
We have restarted the SQL instance and the error repeated itself immediately.
When we restart the server, the error goes away. Right now, I am trying to figure out how long from the time the server is restarted to the time the failures appear. By the way, the server is not mine; it's managed by a partner agency so I have limited access to system statistical functions. I have tried inspecting @@PACK_SENT, @@PACK_RECEIVED and @@PACKET_ERRORS, but I do not have access to sysperfinfo or perf monitor.
I have tried Googling the error message and the results seem to be scattered: there was a problem with corrupt indexes (fixed in SP4), a problem with distributed inserts and some other issues that don't seem to apply in this situation.
I am mystified and I don't know what to suggest. If any of you have any ideas, I would be grateful for your thoughts.
Hi...SQL SERVER 2000 SP3, WINDOWS 2K SERVER...If i run this command on a remote serverselect replicate(' ',190)i have the following error[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionCheckForData(CheckforData()).Server: Msg 11, Level 16, State 1, Line 0General network error. Check your network documentation.Connection Brokenif i run select replicate(' ',60) on the same server it completessuccesfully...any ideas???...thanks...
One of my nightly job fails, In the job history the below message is recorded.. any idea why my job fails.. and what the below statement means.. The job executes a stored procedure.
ConnectionCheckForData (CheckforData()). [SQLSTATE 01000] (Message 10054) General network error. Check your network documentation. [SQLSTATE 08S01] (Error 11). The step failed.
I have a problem running my app on a machine where SQL Server 2005 with CU4 installed (on Windows 2003).
If I connect my app to a remote SQL server, my queries are executed correctly. If I connect an app from other desktops to SQL 2005, the same queries are executed correctly.
I tried different protocols (Shared memory, Named pipes). It seems that Shared Memory is the most fragile: my app fails within 5-10 mins. A connection using Named Pipes can stay up longer.
An error is [ODBC SQL Server Driver] [protocol_name] ConnectionCheckForData (CheckData()).
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit): Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,) <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI) MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,) MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close) MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2 <Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 Gathering darwin properties for failure handling. Error Code: 2 MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
I cannot execute a package by using Execute Package task. I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
We have reports deployed in the Report Server. While connecting from client, we are getting the error "An internal error occurred on the report server. See the error log for more details. rsInternal Error)"
Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.
Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.
We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?> <ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access. I have looked where the error logs should be, but there are no error logs. I rebuilt the query as I needed to change this, but this did not help. Is there someone who could point me in the correct direction.
I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.
Today, actually half way through today, I restarted my computer after installing Photoshop Updates.
Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).
Whenever I run an web app that connects to it I get this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?
--Edit
I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.
My link server was working just fine until friday evening. It stopped worked over the week end. with and error Error 7399: OLE DB provider 'MSDAORA' reported an error. OLE DB error .
---my oracle 10g client is working just fine --TNS names looks fine ---i recreated the link but i am still getting the same error.
I need your help because a lot of jobs are using that link on Monday it is going to be crazzzy.
We have a production SQLServer 6.5 running with service pack SP5a update:
I got the following 2 errors.....
1.
Error : 806, Severity: 21, State: 1 Could not find virtual page for logical page 67833121 in database 'tempdb' database 'tempdb'
2.
I got error when I ran a job for Update statistics Error : 614, Severity: 21, State: 3 A row on page 2697653 was accessed that has an illegal length of -8631 in database 'abc'.
For Error 2: I ran update statistics using query analyser. It is fine Is there anything I have to do further?
For Error 1 : The work around given by Microsoft ================================================= I ran DBCC CHECKTABLE(syslogs)
I am getting the following message on : master: Checking syslogs The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 11 data rows. DBCC execution completed. If DBCC printed error messages, see your System Administrator.
model: Checking syslogs The total number of data pages in this table is 47. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 532 data rows. DBCC execution completed. If DBCC printed error messages, see your System Administrator.
tempdb:
Checking syslogs The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 31 data rows. DBCC execution completed. If DBCC printed error messages, see your System Administrator.
I ran dbcc checkdb on master,model and tempdb . Still I get the same problem.
for tempdb:
Checking 8 The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 19 data rows.
for master: Checking 8 The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 27 data rows.
for model: Checking 8 The total number of data pages in this table is 47. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 532 data rows.
All system databases and userdatabase recovered successfully when I restarted sqlserver.
Hi, I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE. I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.
I am performing below operations for that. Step : 1 Pull To Mobile
Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);
Step : 2 Using one device form i am updating table "ItemMaster" table's values.
So i am getting an error on 3rd step. While i am trying to push it says, "The Push method returned one or more error rows. See the specified error table. [ Error table name = ]". I have tried it in different ways but still i am getting this error.
Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.
Can any one help me?I am trying for that since last 3 days.
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
$exception {"Arithmetic overflow error converting expression to data type smalldatetime. The statement has been terminated."} System.Exception {System.Data.SqlClient.SqlException} occurs here is my code protected void EmailSubmitBtn_Click(object sender, EventArgs e) { SqlDataSource NewsletterSqlDataSource = new SqlDataSource(); NewsletterSqlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["NewsletterConnectionString"].ToString();
//Text version NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.Text; NewsletterSqlDataSource.InsertCommand = "INSERT INTO NewsLetter (EmailAddress, IPAddress, DateTimeStamp) VALUES (@EmailAddress, @IPAddress, @DateTimeStamp)";
I have a web application developed in VS.NET 2005 [using C# as code behind]; and it uses SQL Server 2000 Enterprise edition as backend. The application runs fine, though it gives an error on IRREGULAR intervals on SQL data requests. Error Details: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My problem is this: 1) Why does it show an error of SQL 2005, while I use SQL 2000. SQL 2005 is not even installed on the server, though VS.NET 2005 is installed. 2) The error comes only at irregular intervals. Users are able to login properly otherwise. 3) Application starts working again if we do either of the following: (a) Restart IIS (b) Restart application pool (c) Restart server. 4) Named pipes and TCP/IP are added to the "Network Configuration" of the SQL server 2000. 5) Error does not come on any specific page; or any specific code; or at any specific time. 6) We do not have any background service or any other activity happening on the server; and the server hosts only this application, within a single virtual root.
Any thoughts on why is this happening, and how to resolve this?
Hello, I am having a crystal report using datastored in a dataset. When I select one of items in a dropdownlist, it gives me this error message. Note that I used that code before in another web page using a different crystal report and a different dataSet and it worked successfully, but this time it doesn't work....anyone can tell me what causes this error and how to solve it??? NOTE: I am using a vb code behind in my .aspx page
Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt: Error in formula <Record_Selection>. '{StProd2.ItemDescription}' The result of selection formula must be a boolean. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: CrystalDecisions.CrystalReports.Engine.FormulaException: Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt: Error in formula <Record_Selection>. '{StProd2.ItemDescription}' The result of selection formula must be a boolean.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[FormulaException: Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt: Error in formula <Record_Selection>. '{StProd2.ItemDescription}' The result of selection formula must be a boolean.] .F(String , EngineExceptionErrorID ) .A(Int16 , Int32 ) .@(Int16 ) CrystalDecisions.CrystalReports.Engine.FormatEngine.GetPage(PageRequestContext reqContext) CrystalDecisions.ReportSource.LocalReportSourceBase.GetPage(PageRequestContext pageReqContext) CrystalDecisions.Web.ReportAgent.u(Boolean N) CrystalDecisions.Web.CrystalReportViewer.OnPreRender(EventArgs e) System.Web.UI.Control.PreRenderRecursiveInternal() System.Web.UI.Control.PreRenderRecursiveInternal() System.Web.UI.Control.PreRenderRecursiveInternal() System.Web.UI.Page.ProcessRequestMain()
DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.CREATE PROCEDURE [dbo].[spu_Import_Export_Image](@srvr varchar(50),@db varchar(50),@usr varchar(15),@pwd varchar(50),@tbl varchar(50),@col varchar(50),@mod varchar(1),@imgpath1 varchar(1000),@pk varchar(50))ASBEGINdeclare @path varchar(50)declare @whr varchar(200)declare @fil varchar(100)declare @cmd varchar(1000)declare @imgpath varchar(800)declare @ext varchar(5)--declare @pk varchar(50)declare @KeyValue varchar(8000)declare @image varchar(50)--declare @imgpath1 varchar(1000)declare @imgpath2 varchar(1000)declare @sellist varchar(2000)set @path = 'c: extCopy.exe'select @sellist = 'DECLARE curKey CURSOR FOR SELECT ' + @pk +' FROM '+ @tbl + ' ORDER BY ' + @pkexec (@sellist)OPEN curKeyFETCH NEXT FROM curKey INTO @KeyValueWHILE (@@fetch_status = 0)BEGINset @whr = '"where '+ @pk +' = "' + @KeyValueset @fil = @imgpath1 + '' + @KeyValue --+ @extset @cmd = @path + ' /S ' + @srvr + ' /D ' + @db + ' /U ' + @usr+ ' /P ' + @pwd+ ' /T ' + @tbl + ' /C ' + @col + ' /W ' + @whr + '/F ' + @fil+ ' /' + @modexec Master..xp_cmdShell @cmdFETCH NEXT FROM curKey INTO @KeyValueENDCLOSE curKeyDEALLOCATE curKeyENDGOAbove srcipt runs fine with image data type in one table but when irun for some other table it gives me Error MessageTEXTCOPY Version 1.0DB-Library version 8.00.194SQL Server 'WSQL01' Message 170: Line 1: Incorrect syntax near '99'.(Concerning line 1)DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.ERROR: Could not use database 'test1'NULL-----------Aslo it only runs on server console if i run it from workstation uingsame files and tables it gives me an error again. Can anybody help meand reply me at Join Bytes! asap.thnx,dharmesh
i have migrated a DTS package wherein it consists of SQL task.
this has been migrated succesfully. but when i execute the package, i am getting the error with Excute SQL task which consists of Store Procedure excution.
But the SP can executed in the client server. can any body help in this regard.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
I am attempting to install SQL Server 2005 Developer Edition onto a Windows XP Pro SP2 machine, but unfortunately each time that I attempt to install I receive an error message in the summary log as follows:
Product : Microsoft SQL Server 2005 Product Version: 9.00.1399.06 Install : Failed Log File : C:Program FilesMicrosoft SQL Server90Setup Last Action : InstallFinalize Error String : The setup has encountered an unexpected error while Updating Installed Files. The error is : Fatal error during installation. Error Number : 29528
There is probably a simple solution for the issue but unfortunately I am unaware of what it is? I can€™t tell if the issue is specific to registry settings, security, file types, etc€¦ The information below surrounds the error w/in the log, any suggestions would be greatly appreciated?
The value returned is -2147024891 <EndFunc Name='Do_UpdateETWMOFWithGUID' Return='1603' GetLastError='0'> PerfTime Stop: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007 Gathering darwin properties for failure handling. Error Code: 1603 MSI (s) (6C!D0) [16:02:37:273]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.
<EndFunc Name='LaunchFunction' Return='1603' GetLastError='203'> MSI (s) (6C:94) [16:02:37:283]: User policy value 'DisableRollback' is 0 MSI (s) (6C:94) [16:02:37:283]: Machine policy value 'DisableRollback' is 0 Action ended 16:02:37: InstallFinalize. Return value 3.
Trying to update my local developer version of SQL Server 2005 SP1 to SP2. The setup program terminates with the following information dumped from the logs. Not sure if it is related, but I recently installed the SQL Server 2005 Compact Edition (tools, runtime, etc) on the same development machine. It is a little too deep for me to figure out
Darryl
Here are the last few lines of the HotFix.Log
04/24/2007 14:46:48.374 MSP Error: 29527 The setup has encountered an unexpected error in datastore. The action is RestoreSetupParams. The error is : Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
04/24/2007 14:46:48.822 The following exception occurred: Unable to install Windows Installer MSP file Date: 04/24/2007 14:46:48.822 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllcopyengine.cpp Line: 800
Now the SQL9_Hotfix_KB921896_sqlrun_sql.msp.log shows this as the last few lines
MSI (s) (A4:38) [14:46:48:630]: Product: Microsoft SQL Server 2005 - Update 'Service Pack 2 for SQL Server Database Services 2005 ENU (KB921896)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 1729 MSI (s) (A4:38) [14:46:48:630]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:662]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:678]: Product: Microsoft SQL Server 2005 -- Configuration failed.
MSI (s) (A4:38) [14:46:48:678]: Attempting to delete file c:WINDOWSInstaller6749ee3.msp MSI (s) (A4:38) [14:46:48:678]: Unable to delete the file. LastError = 32 MSI (s) (A4:38) [14:46:48:694]: Cleaning up uninstalled install packages, if any exist MSI (s) (A4:38) [14:46:48:694]: MainEngineThread is returning 1603 MSI (s) (A4:2C) [14:46:48:694]: Destroying RemoteAPI object. MSI (s) (A4:04) [14:46:48:694]: Custom Action Manager thread ending. === Logging stopped: 4/24/2007 14:46:48 === MSI (c) (58:E4) [14:46:48:694]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (58:E4) [14:46:48:694]: MainEngineThread is returning 1603 === Verbose logging stopped: 4/24/2007 14:46:48 ===
Time: 04/24/2007 14:46:48.854 KB Number: KB921896 Machine: DUTTONDARRYL1 OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600) Package Language: 1033 (ENU) Package Platform: x86 Package SP Level: 2 Package Version: 3042 Command-line parameters specified: Cluster Installation: No
********************************************************************************** Prerequisites Check & Status SQLSupport: Failed
********************************************************************************** Products Detected Language Level Patch Level Platform Edition Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x86 DEVELOPER Notification Services ENU SP1 9.00.2047.00 x86 DEVELOPER Integration Services ENU SP1 9.00.2047.00 x86 DEVELOPER SQL Server Native Client ENU 9.00.2047.00 x86 Client Components ENU SP1 9.1.2047 x86 DEVELOPER MSXML 6.0 Parser ENU 6.00.3890.0 x86 SQLXML4 ENU 9.00.2047.00 x86 Backward Compatibility ENU 8.05.1704 x86 Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x86
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
