MS SQL Server :: Error: CrystalDecisions.CrystalReports.Engine.FormulaException: Error In File C:DOCUME~1AM-TK-~1ASPNETLOCALS~

CrystalDecisions.CrystalReports.Engine.LogOnException: Logon Failed

Dec 17, 2007

Hi all,
I got an error when i use crystal reports to open a report of a database in a web application.
I use the server as Oracle 10g.
The error is as follows.:

Logon failed. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:

[LogOnException: Logon failed.]
.F(String , EngineExceptionErrorID
) +506
.A(Int16 , Int32 ) +537
CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext) +468
CrystalDecisions.CrystalReports.Engine.FormatEngine.Export() +107
CrystalDecisions.CrystalReports.Engine.ReportDocument.Export() +67
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731

What is this error?
How do i correct it?

Thank you

View 3 Replies View Related

DB Engine :: Log File Error While Running A Stored Procedure?

Nov 2, 2015

We try to run a stored procedure in management studio - and we see the following error -
"
Executed as user: "Some User". Unspecified error occurred on SQL Server. Connection may have been terminated by the server.

[SQLSTATE HY000] (Error 0) The log for database 'Some-database' is not available.

Check the event log for related error messages.

Resolve any errors and restart the database.

[SQLSTATE HY000] (Error 9001) During undoing of a logged operation in database 'Some-Database', an error occurred at log record ID (2343114:16096:197).

Typically, the specific failure is logged previously as an error in the Windows Event Log service. Restore the database or file from a backup, or repair the database.

[SQLSTATE HY000] (Error 3314) During undoing of a logged operation in database 'Some-Database', an error occurred at log record ID (2342777:81708:1).

Typically, the specific failure is logged previously as an error in the Windows Event Log service.

Restore the database or file from a backup, or repair the database. [SQLSTATE HY000] (Error 3314). The step failed.

View 2 Replies View Related

DB Engine :: Error - Failed To Connect To IPC Port - System Cannot Find File Specified

Jun 2, 2008

In Management Studio i highlight my query and then click on 'Analyse query in Database Engine Advisor' but i get the following error message: "Failed to connect to an IPC Port: The system cannot find the file specified". Seems like if I reboot my computer it works one time then get the same error on the second time.I'm running developer edition with service pack 2.

View 8 Replies View Related

DB Engine :: Unable To Open Physical File - Operating System Error 5

Apr 16, 2008

I am trying to attach a database to SQL 2005. This database has not previously been attached. I have only just installed SQL.

I get the following message: Unable to open physical file "C:ArrowSQLArr@DataArrow_data.mdf" Operating system error 5: "5(error not found)" (Microsoft SQL Server: Error 5120)".

I have loaded SQL and the database fiel and directory with the same user account which is a local administrator on this machine. I have checked that I have read/write access to the file.

The machine runs Windows Vista Business. SQL has SP 2 loaded. What causes this?

View 56 Replies View Related

[File System Task] Error: An Error Occurred With The Following Error Message: Access To The Path Is Denied

Sep 7, 2007

Hi -

I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:

[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".

Where do I change the security settings?

Thanks - Grace

View 5 Replies View Related

DB Engine :: How To Avoid Error In Error Log

Oct 13, 2015

Due to one Event tracing windows continuous error, our error log size increasing and also causing disk space issue.

Is there any possibility to avoid only error in sql log?

View 11 Replies View Related

Flat File Source Error Output Conversion Error With UNICODE Files

May 14, 2008

i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.

simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".

i hope you can help me with issue.

Thanks in advance.

View 5 Replies View Related

Error: 5123 CREATE FILE Encountered Operating System Error 5A(Access Denied.)

Mar 22, 2006

HI ,

This is a problem I encountered when I had to detach a database file (type .mdf):

1) I went to the MS SQL Management Server Studi and detached my database file successfully from a connection called Workhorse.

2) I needed to place the .mdf database file into a zip file in order to put it on a remote server. I did this using Shared Portal. This was also successful

3) However when I tried reattaching the database file, I got this error:

CREATE FILE encountered operating system error 5A(Access denied.) while attempting to open or create the physical file "CProgram FilesMSSQL ServerMSSQLData<databasename>.mdf'

Q) The database file and log file (ldf) exist in the correct directory so I don't know what happened. Can any one help?

Thanks much

Tonante

View 42 Replies View Related

Error In Accessing Site Which Is Restored Using STSADM. Error-The File Exists. (Exception From HRESULT: 0x80070050)

Oct 8, 2007

i have restored site using stsadm, site get successfully restored.
all user of the site able to access the site but the unable to access from same machine on which it is restored.
i got the error
The file exists. (Exception from HRESULT: 0x80070050)

View 1 Replies View Related

[ActiveX Script Task] Error: Retrieving The File Name For A Component Failed With Error Code 0x001B6438.

Jul 28, 2006

This error occurs when the ActiveX task tries to execute:

[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.

Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.

View 8 Replies View Related

Error Message: Error 0x800706BE While Loading Package File D:PackagesToradSales.dtsx. The Remote Procedure Call Failed.

Dec 20, 2006

Hello,

I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,

Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.

I�m running the SSIS packages in an 64-bit environment.

Thankful for help with this!

//Patrick

View 3 Replies View Related

Query Engine Error

Jan 4, 2007

Can anyone tell me why I am getting this error when I try to view my report:

Query Engine Error: '21000:[Microsoft][ODBC SQL Server Driver][SQL Sever] Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <=,>,>= or when the subquery is used as an

View 4 Replies View Related

SQLServerCe Engine Error

Sep 21, 2007

I have successfully converted a MSVS 2005 Winforms Application into the MSVS 2008 beta 2. I am however having trouble getting the winmobile data tables to fill. The ODBC Paradox tables fill fine. When I converted the application I had to re create the win mobile datasource for the project. So I used the datasource wizard in 2008, it opened the winmobile5 database and told me that I would need to convert the database to 3.5. I let it overwrite the existing database and it created a new .xsd file for me for the project. When I try to load data into the database tables

this.proceduresTableAdapter.Fill(this.fB7MobileDBDataSet.Procedures);

I get the native error 28609

You are trying to access an older version of a SQL Server Compact 3.5 database. If this is a SQL Server CE 1.0 or 2.0 database, run upgrade.exe. If this is a SQL Server Compact 3.5 database, run Compact/Repair.

I have run Compact but not repair, and still get the same error.

1. What could be left in the project that ismaking it expect to open the 3.0 database instead of the 3.5 that was converted in the datasource wizard?(If I substitute an older database file I get the native error 25010 Invalid File Name. Check the database filename. )
2. Is there a way after you convert a project to then add a datasource to the project that would use the same xsd file and datasetDesigner.cs from before the conversion ?

Thanks Jon Stroh

View 2 Replies View Related

Database Engine Connection Error.

Mar 6, 2006

I got the sql2005 std edition at the msdn rollout, and the vs2005 studio. I uninstalled sql2000 and now, cannot connect to the database engine.

I get the following error message with a link to an page that offers no info. What's up and how can I get it to work? Please, help.

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476

View 3 Replies View Related

Error Connecting To Database Engine

Apr 25, 2006

I have been successfully using SQL Server 2005 developer
edition for a couple of months now. However,
when I started Microsoft SQL Server Management Studio this morning I could not
connect to the ��Database Engine�? (I��m using Windows Authentication). I can still connect with the ��Integration
Services�? and ��Analysis Services�? on the same server. The server running on my local machine, so
there shouldn��t be any problems with the network. I am also able to connect with it through
ODBC, it just seems to be the Server Management Studio which can��t connect, and it only has
problems with the ��Database Engine.�? Any
help would be appreciated.David

The detailed error message says:

An error has occurred while establishing a connection to the
server. When connecting to SQL Server
2005, this failure may be caused by the fact that under the default settings SQL
Server does not allow remote connections. (provider: TCP Provider, error: 0 -
No connection could be made because the target machine actively refused it.)
(.Net SqlClient Data Provider)

------------------------------

For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476

------------------------------

Error Number: 10061

Severity: 20

State: 0

------------------------------

Program Location:
at
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception,
Boolean breakConnection)

at
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj)

at
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner,
Boolean& failoverDemandDone, String host, String failoverPartner, String
protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean
encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection
owningObject, Boolean aliasLookup)

at
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection
owningObject, SqlConnectionString connectionOptions, String newPassword,
Boolean redirectedUserInstance)

at
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity
identity, SqlConnectionString connectionOptions, Object providerInfo, String
newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)

at
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions
options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection
owningConnection)

at
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection
owningConnection, DbConnectionPoolGroup poolGroup)

at
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection
owningConnection)

at
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection
outerConnection, DbConnectionFactory connectionFactory)

at
System.Data.SqlClient.SqlConnection.Open()

at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo
ci, IServerType server)

at
Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

View 6 Replies View Related

DB Engine :: How To Change Error Log Location

Nov 30, 2006

I have been trying to change the location of the SQL 2005 error log. It's logging to the default location at

C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOG

I want to move the log location to the E drive because it can get quite large. I already changed the setting in the SQL Server Error and Usage config tool, but this did not seem to make a difference.

View 5 Replies View Related

DB Engine :: Error Specified Cast Is Not Valid

May 25, 2015

I have a backup of DB with version Microsoft sql 2012 and i need restore this data base on instance Microsoft sql 2008 R2
when i try restore database on SQL server 2008 R2 i have the error:

Specified cast is not valid.
(SqlManagerUI)

View 6 Replies View Related

[help] SQL Error - I/O Error 2 (The System Cannot Find The File Specified)

May 13, 2004

Windows 2000 Server SP4 + SQL Server 2000 Enterprise Editon SP3,RAID5.

the windows event log give the following error information:

I/O error 2(The system cannot find the file specified) detected during write at offset 0x0000010c6c4000 in file 'D:Program FilesMicrosoft SQL ServerMSSQLdataGJSZBANK_Data.MDF'.

I have searched microsoft knowledge base and got this article:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;828339

but don't understand some contents in the topic:

For example, if you encounter the following error message in the SQL Server Errorlog file, SQL Server encountered operating system error 2 when it uses a Windows API call to write to the tempdb primary database file:

Error: 823, Severity: 24, State: 4
I/O error 2(The system cannot find the file specified.) detected during write at offset 0x00000000284000 in file 'D:Program FilesMicrosoft SQL ServerMSSQLdata empdb.mdf'

Because SQL Server has already successfully opened the file and did not receive an �Invalid Handle� error, the error is likely being raised in a lower-level kernel software component, such as the file system or a device driver. This problem does not indicate a problem in SQL Server, and it must be investigated as an issue with the file system or a device driver that is associated with the file.

Does that mean this is not a SQL Server error?
Does that mean something wrong with my operating system? or something wrong with my hard disk?

View 1 Replies View Related

Error 3125 - The Database Engine Can't Find <name>

Mar 20, 2001

I am running SQL 7.0 with Access 97 as a front end. I am having a problem linking one of the tables with an odbc connection. When I try to link the table, it gives me the error :

"The database engine can't find <name of table>. Make sure it is a valid parameter or alias name, that it doesn't include invalid characters or punctuation, and that the name isn't too long."

I have tried renaming the table, and it then will allow the connection, but if I rename it back to the original name, it doesn't work again. The table name is "Invoice_Line_Item". Changing the name permanently is not an option.

Has anyone else run across this problem, or know of a fix for it.

View 1 Replies View Related

DB Engine :: Cannot Open Backup Device Error

Jul 14, 2015

I am trying to take backup on network folder but I am getting below error:

Msg 3201, Level 16, State 1, Line 9
Cannot open backup device 'xyz.xy.z.xyabcdexyxyzarchive_2015_7_14_11_14_58.Diff'. Operating system error 1326(Logon failure: unknown user name or bad password.).
Msg 3013, Level 16, State 1, Line 9

BACKUP DATABASE is terminating abnormally.

NOTE:- The folder abcde is protected by password , When I try to open the xyz.xy.z.xy, I provide password to connect.

I am using the below script :

DECLARE @filename VARCHAR(255)
SELECT @filename ='xyz.xy.z.xyabcdexyxyzarchive_' +
LTRIM(STR(DATEPART(year, GETDATE()))) + '_' +
LTRIM(STR(DATEPART(month, GETDATE()))) + '_' +

[Code] ...

How to troubleshoot / resolve this error permanently?

View 8 Replies View Related

Database Engine Tuning Advisor Error

Jul 3, 2006

I have a very irritating error with Database Engine Tuning Advisor. While processing traces from Sql Profiler I keep getting trace log full of syntax error of most of queries - some of them very simple and ALL of them perfectly correct ( I check them separatly in QueryAnaliser ) - program gives recomendtation when I enter queries one by one - in that case the syntax is correct for Database Engine Tuning Advisor, but I just can't imagine why quries given to analysis in the set aren't correct? I dont' want to enter trace query by query (while I have thousends of them) !

It all seem like a Database Engine Tuning Advisor bug, any ideas about this problem?

Joanna

View 1 Replies View Related

DB Engine :: Transaction Log Database Corruption Error

Jul 23, 2015

I am having an issue for transaction log database backup getting failed and throw me a following error. I never seen this corruption error before so Is there any solution for it?This error is from my Log file:-

Failed:(-1073548784) Executing the query "BACKUP LOG [Xe] TO DISK = N'D:XeXeXe_backup_201507230922.trn' WITH NOFORMAT, NOINIT, NAME = N'Xe_backup_20150723092224', SKIP, REWIND, NOUNLOAD, STATS = 10

" failed with the following error: "BACKUP detected corruption in the database log. Check the errorlog for more information. BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.This is from SQL JOB error"-

Executed as user: SqlAdmin. ...ion 9.00.5324.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 9:22:20 AM Progress: 2015-07-23 09:22:24.08 Source: {297F9C99-05AE-47BD-AA70-3E25DDD78CAB}
Executing query "DECLARE @Guid UNIQUEIDENTIFIER EXECUTE msdb..sp".: 100% complete End Progress Progress: 2015-07-23 09:22:24.91 Source: Back Up Database (Transaction Log)

[code]....

View 10 Replies View Related

Error 18456 - Cannot Connect - Database Engine

Dec 12, 2007

I finally got SQL Server 2005 installed on my Vista Ultimate computer and now I can't connect in SQL Server Management Studio.

I've got a named instance; use the built-in system account; windows authentication mode. I try to connect to

Server type: Database Engine
Server name: RAYWOERNER-PCRAYWOERNER
Authentication: Windows Authentication

and it fails. Please help.

Thanks,

Ray

Here are the technical details:

===================================
Cannot connect to RAYWOERNER-PCRAYWOERNER.
===================================
Login failed for user 'RayWoerner-PCRay'. (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
------------------------------
Server Name: RAYWOERNER-PCRAYWOERNER
Error Number: 18456
Severity: 14
State: 1
Line Number: 65536

------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

View 3 Replies View Related

DB Engine :: Identifying Cause Of Non Yielding Scheduler Error

Sep 15, 2015

I've applied SP3 to a 2008 R2 instance in order to solve non yielding scheduler errors. However, I just had another one after applying the SP.

Select @@Version:
10.50.6000.34.

The minidump generated shows this stack trace, which unfortunately, did not point me to a specific bug.

0:039> ~~[0xe30]s
sqlservr!CSqlHandleList::FResize+0x11a:
00000000`022c2b26 498b4108 mov rax,qword ptr [r9+8] ds:00000000`a4c26088=????????????????
0:039> k

[code]....

View 5 Replies View Related

Error Installing Full-text Search Engine

Dec 19, 2006

Hi, though i've been using sql server 2000 developer edition for awhile, I guess i overlooked the fact that the full-text search tool was never installed and i never needed it until now. Anyway, tried installing it today and get this error:

Installation of Microsoft Full-Text Search Engine Package Failed (-2147220991) 0x80040201
An event was unable to invoke any of the subsribers

I have no idea what this means - can you help me to get this installed correctly? I did just install service pack 4, and i tried reinstalling the components, tried rebuilding the registery of the current instance, and even tried creating a new instance with hopes that the new instance would install the full-text component - which it did not.

Any suggestions? Maybe I have to unistall the entire Software and reinstall it? Would I lose any of my data in doing this? I should note that all other tools seem to function fine.

Thanks ahead!

Dan

View 1 Replies View Related

DB Engine :: Backup On Remote Server - Access Error

Nov 12, 2015

I am trying to make my maintenance plan to backup on a remote server but it fails with:

"failed with the following error: "xp_delete_file() returned error 2".

I am pretty sure its because it doesnt have full access to the share folder... My question is, how can I grant access to it, if I am using a local account as sql agent service: NT ServiceSQLSERVERAGENT.I need to change the service account?

View 13 Replies View Related

DB Engine :: SSPI Handshake Failed With Error Code

Nov 22, 2010

I have a SQl2k8 R2 up and running on a win2k8 R2, I have a domain controller as well with AD 2k8 R2. It works fine but from time to time I receive a dozen of successive alerts like th folowing

DATE/TIME:
11/22/2010 12:19:57 PM

DESCRIPTION: SSPI handshake failed with error code 0x80090311, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure.

COMMENT:
(None)
JOB RUN:
(None)

I understand from some threads here that it is an issue related to contacting the AD. In event viewer it is not clear what is casuing this. I have WSS databases, Biztalk server databases.....and some other user databases. NO home made applications contact sql server.

What is the best route to follow to see who is not being able sometimes and why contacting the AD. I read the thread at URL.... but it is related to express 2005 and it does not apply to my case.

View 4 Replies View Related

DB Engine :: High Availability Database Backup Error

May 19, 2015

Backing up all databases on a sql server that hosts secondary high availability databases as well as other databases. The other databases back up fine, but the high availability secondaries all get the same error:

BackupDiskFile::OpenMedia: Backup device 'F:MSSQLBackupdbnamedbname_backup_2015_MM_DD_tttttt_ttttttt.bak' failed to open. Operating system error 2(The system cannot find the file specified.)

View 11 Replies View Related

DB Engine :: Error Occurred While Establishing Connection To Server

Sep 23, 2015

TFS is unable to connect to SQL server. Was working fine and has been for months. Today the backup tool failed due to the tempdb being maxing out c: space.Ran the following command, then restarted.

View 7 Replies View Related

DB Engine :: Error - Report Execution Has Expired Or Cannot Be Found

Sep 22, 2010

I am running a huge SSRS 2008 report and it gets rendered sometimes and sometimes it gives me an error,"The report execution has expired or cannot be found. (rsExecutionNotFound)”.

When I see SQL Server log after this issue comes I see following message there; "A significant part of sql server memory has been paged out. This may result in performance degradation. Duration: 300 seconds. Working set(KB): 97672, memory utilization 42%" .what is the issue and how to fix it.

View 21 Replies View Related

DB Engine :: DBCC Error In Full Text Internal Table?

Jul 23, 2015

I have a database that has had a full text index at some point in it's history - but no longer does. The database is currently at SQL 2012 compatibility, but it was created on SQL2000. It still appears to have a row in the internal table sys.sysftinds - but some of the column values are NULL, and NULLs are not allowed. The database fails DBCC checks because of this.

Msg 8970, Level 16, State 1, Line 2
Row error: Object ID 25, index ID 1, partition ID xxxx,
alloc unit ID xxxx (type In-row data),
page ID (1:xxxx), row ID 0. Column 'sensitivity' was created NOT NULL, but is NULL in the row.
DBCC results for 'sys.sysftinds'.

There are 1 rows in 1 pages for object "sys.sysftinds".

CHECKTABLE found 0 allocation errors and 1 consistency errors in table 'sys.sysftinds' (object ID 25).

repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKTABLE (xxxx.sys.sysftinds).

DBCC execution completed. If DBCC printed error messages, contact your system administrator.

Running DBCC with repair_allow_data_loss has not worked.

View 6 Replies View Related

Error 29503 - SQL Server 2005 DB Engine Install Fails

Nov 16, 2005

Hi, I've just tried to install SQL Server 2005 Standard and I'm getting an error that I can't find any information on. In the log, I find Error 29503. A message after it indicates that it couldn't start the server.

View 11 Replies View Related