Hi Guys,This is my first post and I hope I'm not going to embarrass myself to much.I am currently writing a pseudo install package for SQL Server Express, it is written in VB.Net 2.0.
I have created an *.exe that fires the SQL Server Express install package silently with command line options, once complete the *.exe copies an *.MDF and an *.LDF to the newly created data directory. Once the data has been copied I fire a "CREATE DATABASE FOR ATTACH" using a SQLClient.SQLCommand to attach my DB. I am using Windows Authentication for SQL Server Express.This all works beautifully when the *.exe is being run from a local hard disk - complete success.When I move the *.exe to a CD it fails . SQL Server is installed correctly, the files are copied to the local hard disk in the correct location. I then fire the "CREATE DATABASE" command - its here I get the error.The error details are:Unable to open the physical file "c:....Exchange.LDF". Operating System error 5:"5(error not found)". Cannot create file "c:....Exchnage.ldf" because it already exists. Change the file path or file name, and retry the operation. Could not open new database 'Exchange'. CREATE DATABASE is aborted. File activation failure. The physical file name "c:....Exchange.LDF" may be incorrect.Remember this works perfectly when run from the local hard disk, this only occurs when running from a CD-ROM.Now from the research I have done I believe it may be a permissions error. The setup *.exe is being run from a Administrator account and the SQL Server DB Engine Service Account is System. I'm under the impression that this should provide more than enough permissions.
Thanks for any help you guys may be able to provide...
Matt.
Has anyone ever used the CREATE DATABASE statement with the FOR ATTACH clause?
I have a database with something like 128 physical data files which I have to move (detach, move the physical files and then re-attach). Since the limit for sp_attach_db is 16 files, I am forced to use the FOR ATTACH option. I was wondering if anyone had ever done this and if there were any hints and/or recommendations you might be willing to share...
Hello, I just recently installed SQL Express 2005 on a new OS which is on Vista Ultimate. When I try to attach a database by clicking the add button, I receive this error: =================================== Failed to retrieve data for this request. (Microsoft.SqlServer.Express.SmoEnum) ------------------------------For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476 ------------------------------Program Location: at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request) at Microsoft.SqlServer.Management.SqlManagerUI.BrowseFolderHelper.GetBrowseStartPath(ISettingsStorage settingsStorage, ServerConnection serverConnection, Type controlType, String settingKey) at Microsoft.SqlServer.Management.SqlManagerUI.AttachDatabase.GetStartPath(String settingName) at Microsoft.SqlServer.Management.SqlManagerUI.AttachDatabase.buttonBrowse_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) =================================== An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo) ------------------------------Program Location: at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Smo.ExecuteSql.ExecuteImmediate(String query) at Microsoft.SqlServer.Management.Smo.ExecuteSql.GetDataProvider(StringCollection query, Object con, StatementBuilder sb, RetriveMode rm) at Microsoft.SqlServer.Management.Smo.SqlObjectBase.FillData(ResultType resultType, StringCollection sql, Object connectionInfo, StatementBuilder sb) at Microsoft.SqlServer.Management.Smo.SqlObjectBase.FillDataWithUseFailure(SqlEnumResult sqlresult, ResultType resultType) at Microsoft.SqlServer.Management.Smo.SqlObjectBase.BuildResult(EnumResult result) at Microsoft.SqlServer.Management.Smo.SqlObjectBase.GetData(EnumResult erParent) at Microsoft.SqlServer.Management.Smo.Environment.GetData() at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci) at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request) at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request) =================================== The server principal "MyComputerKarl" is not able to access the database "model" under the current security context. (.Net SqlClient Data Provider) ------------------------------For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=916&LinkId=20476 ------------------------------Server Name: MyComputerSQLEXPRESSError Number: 916Severity: 14State: 1Line Number: 1 ------------------------------Program Location: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
When I try to creat a new database I receive this error: =================================== Create failed for Database 'TestDB'. (Microsoft.SqlServer.Express.Smo) ------------------------------For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+Database&LinkId=20476 ------------------------------Program Location: at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CreateImpl() at Microsoft.SqlServer.Management.Smo.Database.Create() at Microsoft.SqlServer.Management.SqlManagerUI.CreateDatabaseData.DatabasePrototype.ApplyChanges(Control marshallingControl) at Microsoft.SqlServer.Management.SqlManagerUI.CreateDatabase.DoPreProcessExecution(RunType runType, ExecutionMode& executionResult) at Microsoft.SqlServer.Management.SqlMgmt.SqlMgmtTreeViewControl.DoPreProcessExecutionAndRunViews(RunType runType) at Microsoft.SqlServer.Management.SqlMgmt.SqlMgmtTreeViewControl.ExecuteForSql(PreProcessExecutionInfo executionInfo, ExecutionMode& executionResult) at Microsoft.SqlServer.Management.SqlMgmt.SqlMgmtTreeViewControl.Microsoft.SqlServer.Management.SqlMgmt.IExecutionAwareSqlControlCollection.PreProcessExecution(PreProcessExecutionInfo executionInfo, ExecutionMode& executionResult) at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.RunNow(RunType runType, Object sender) =================================== An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo) ------------------------------Program Location: at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection sqlCommands, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection queries) at Microsoft.SqlServer.Management.Smo.SqlSmoObject.ExecuteNonQuery(StringCollection queries, Boolean includeDbContext) at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CreateImplFinish(StringCollection createQuery, ScriptingOptions so) at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CreateImpl() =================================== CREATE DATABASE permission denied in database 'master'. (.Net SqlClient Data Provider) ------------------------------For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=262&LinkId=20476 ------------------------------Server Name: MyComputerSQLEXPRESSError Number: 262Severity: 14State: 1Line Number: 1 ------------------------------Program Location: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) On my previous computer which had WinXp Pro I had no such problems Any Help would be much appreciated Thanks Karl
I have a medical records system, SoapWare v4.90, that uses MSDE (SQL2000) databases. Due to the 2gb limitation, I am trying to migrate over to SQL 2005 (Standard or Express) which I have heard works fine. The SoapWare has a datamanager that allows me to log in to the MSDE instance, detach the SoapWare databases from msde (as well as do backups, etc) which I can confirm are detached.
Then I log back into a SQL2005 database instance using the datamanager and try to attach the database. This is what their pictured instructions demonstrate. However, I get the following error:
Database 'sw_charts' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
Of course, some of the entries will be read only, since doctors have to sign off the charts and are not allowed to subsequently change them. But I should still be able to switch over to sql 2005?!?!?!?
Or... is there a way to attach the databases to SQLExpress manually?
Hello, I have a SQL Express database created with VWD 2005 and I want to attach it to the server using the SQL Server Management Studio. It is not the first time when I attach a database, but now, I don't know from what reason, it is not working anymore. So, I copy/paste the mdf and ldf files from the website location (the SQL Server Management Studio is not opening the folder C:usersmyuser in Vista Home Premium, don't know why) to a new location and try to attach. The error message is: TITLE: Microsoft SQL Server Management Studio Express------------------------------ Attach database failed for Server 'GEORGE-PCSQLEXPRESS'. (Microsoft.SqlServer.Express.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476 ------------------------------ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo) ------------------------------ Unable to open the physical file "E:SQLaria.mdf". Operating system error 5: "5(error not found)". (Microsoft SQL Server, Error: 5120) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=5120&LinkId=20476 ------------------------------BUTTONS: OK------------------------------ The file location is OK, what can I do?
I created a database in SQL Server Management Studio Express. I since detached the database and consequently now I get the below error message when trying to attach it.
Anyone have any ideas? The database is preety much brand new and very small. I can open the database with Visual Studio.
Thanks in Advance.
Error:
TITLE: Microsoft SQL Server Management Studio Express ------------------------------ Failed to retrieve data for this request. (Microsoft.SqlServer.Express.SmoEnum) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo) ------------------------------ CREATE FILE encountered operating system error 5(error not found) while attempting to open or create the physical file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataS.A.M..mdf'. (Microsoft SQL Server, Error: 5123) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=5123&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------
I am trying to attach a network database to my sql server express
After some reading I "Enabled" tcp/ip, named pipes, and shared memory in sql server confiuration manager.
But when I go to "Attach Database" in Sql Express managemnent studio. It does not show the network drives much less allow me to attach anything on a network drive.
What am I missing here?
If I install sql server on the network machine will my local Sql express recognize it?
I am supposed to be documenting the SQL Express 2005 SP2 installation and connection to our application on Vista. I have installed and uninstalled the application several times in trying to create the connection and document the process. I thought I was done but now the database will not attach because it thinks the databasse is already attached. The database is not attached. I even uninstalled it again thinking something was left over.
Among the possibilities are that the database we are trying to attach is from SQL Server 2003 on a Server 2003. I tend not to think it is a server issue but have no reason to make that statement.
I tend to think it is a Vista issue because I have encountered and circumvented several. Our applications work fine on the full version of SQL. I can connect my Vista computer to the servers without issue. We have no Vista Servers other than the workstation I am trying to get SQL Express running on.
I am about out of ideas. Any suggestion will be tried at this point. Brian
tried to attach a database in sse-ms, and for some reason the database name is changing to G:someFoldersomeFolderdb.mdf, even tho i dont have a drive g:,
during "attach as" screens inside sse-ms, , ie attach>add> then select the database the mdf loction is what it is suppose to be ie C:inetpubwwwrootapp_datachp11wroxunited.mdf but the database name in the same screen shot is G:someOtherFolderAndPathwroxunited.mdf and the attach as is also the G:someOtherFolderAndPathwroxunited.mdf.
I have installed a sample from the web and put it in my localhost inetpub folder, then i open up my SQL Server 2005 Express to attach the database from the App_Data directory, it throws an error below:
errors occur in both window and sql authentication login. Error: Attach database failed for Server '...SQLEXPRESS'. (Microsoft.SqlServer.Express.Smo) Additional Information An exception occcured while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo) Directory lookup for the file "C:Documents and SettingsmirtariqMy DocumentsWorksStarterKitVSI smallbusiness_csApp_DataSmallCompanyDB_log.LDF" failed with the operating system error 3(The system cannot find the path specified.).(Microsoft SQL Server, Error:5133)
I m facing a strange phenomenon. Please refer to below points.
environment: ------------------ windows XP sp2 SQL Server 2005 express [log on as 'network service'(by default)]
programming language: VC++(MFC)
There is a sample database in .mdf format which to be attached to SQL Server.
Ist case: ------------ I add MASTERDSN (for master databse) to ODBC by calling API SQLConfigDataSource() and then attach the sample DB to SQL Server by calling stored procedure 'sp_attach_db' through VC++ code. On verification from SQL Server management studio express, the DB attached is in read only mode.
II case: ---------- I add MASTERDSN using ODBC data source administrator manually. Now I add MASTERDSN (again with same name) by calling API SQLConfigDataSource() and then attach the DB to SQL Server by calling stored procedure 'sp_attach_db' through VC++ code. Now on verification, the DB attached is not in read-only mode.
The problem is that why there is difference in behavior in both cases? I want to get the sample DB attached in read-write mode in Ist case.
Hopefully waiting for ur response. Thanks & Regards
i am developing an installer for our produce where there is a need to install sqlexpress and then i have to attach the database to that but i am unable to understand how to do that , i any one can help in this issue plss
I am having a problem Attaching, well actually not being able to see a database when attempting to attach it. I suspect this is more of a security issue rather than a problem with Management Studio, but I can't figure out what is happening.
If I copy a database to Documents and SettingsAll Users... and attempt to attach I can see the file in the selection tree. This also is the case if I copy it to Documents and SettingsDefault User... But if I copy it to Documents and SettingsADynarski... which is the account I normally log into, when I expand the folder in the selection tree, nothing is visible. And the same thing occurs if I copy the file to Documents and SettingsGuest...
I've looked at the security settings and everything appears to be normal. This is on a box with XP Home and SQL Server Express. Can anyone tell me what I'm missing?
Hi. I would like to if its possible to take a Express ".mdf" file and attach it to a full blown SQL Server 2005?, to "attach" it to a real SQL Server 2005?. And how do i do this?. or do i have to do it since there is a "DataDirectory" directive that manage this for me in the connectionstring?, im a little newbie about this :)
I just downloaded AdventureWorks_Data.mdf, AdventureWorks_Data.ldf, AdventureWorksDW_Data.mdf, and AdventureWorksDW_Data.LDF files to the C:Program FilesMicrosoft SQL ServerMSSQL.1|MSSQLData folder of my Windows XP Pro PC. I tried to attach the AdventureWorks database in my SQL Server Management Studio Express in the following way: I clicked on SQL Server 2005 Express=>SQL Server Management Studio Express=>Right clicked on Databases=> clicked on "Attach..."=> "Attach Databese" showed up. But I can not type in anything under the MDF File Location, Database Name, Attach As, Owner, Status, Message!!!??? What is wrong in my way of doing the attachment of AdventureWorks database (described above)? Please help and advise.
Thanks,
Scott Chang
P. S. I do not have Microsoft Visual Studio 2005. Walkthrough: Install the AdventureWorks Database (http://msdn2.microsoft/en-us/library/ms31035.aspx) : To confirm your SQL Server data directory (Start=>All Programs, Microsoft Visual Studio 2005, Visual Studio Tools, Visual Studio 2005 Command Prompt) steps 1 thru 4 can not be applied to my SQL Server Management Studio Express. I read an SQL Express post dated 19 April 2006 and learned the above-mentioned way to attach the AdventureWorks database in the SQL Server Management Studio Express. But that way does not work for me.
After i reinstall SQL Server 2005 Express on my local machine, and then tried to attach AdventureWorks_Data.mdf into Database, it gives me the following error: Mark up:
I tried to reinstall the Adventureworks.msi installer and reattach again in SQL Server 2005 Express, it gave me the same error. I then deleted both SQL Server 2005 Express & Adventureworks, and then restart my pc and reinstall again, it still gave me the same error. Error: Failed to retrieve data for this request. (Microsoft.SqlServer.Express.SmoEnum) Additional Information: An Exception occurred while executing a Transact-SQL Statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo) CREATE FILE encountered operating system error 5(Access is denied.) while attempting to open or create the physical file 'C:Program FilesMicrosoft SQL ServerMSSQL.1DataAdventureWorks_Data.mdf' (Microsoft SQL Server, Error:5123)
I am trying to attach a database to SQLEXPRESS. I get an error, [Directory Lookup for the file C: . . . DataORION.mdf" failed with the operating system error 5(Access is denied.)]
I tried to attach another database and got the same error. I have attached databases to SQLEXPRESS before successfully. I tried to attach using single file to no avail.
I am using the query, "sp_attach_db @dbname=N'ORION', @filename1=N'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataORION.MDF' go"
ORION.mdf is in the Data folder for SQLEXPRESS
What am I doing wrong or what did I change inadvertently to restrict my access to the file?
Hi! I created one database on one server which system working with Win2003server. Now I tried to attach the database to another server which is working with WinXP SP2, I got this error 'Msg 5120, Level 16, State 101, Line 1 Unable to open the physical file "E:ASPNETDB.MDF". Operating system error 5: "5(Access is denied.)". Msg 911, Level 16, State 1, Line 1 Could not locate entry in sysdatabases for database 'Everydayonline'. No entry found with that name. Make sure that the name is entered correctly.' is anything i am missing while attaching? i just copied the .mdf and .log file from first system to second system. I was tried to make backup of the database and restore, but it was also not workedout. When I tried to restore the database I got this error 'Msg 5133, Level 16, State 1, Line 1 Directory lookup for the file "F:ASPNETDB.MDF" failed with the operating system error 3(The system cannot find the path specified.). Msg 3156, Level 16, State 3, Line 1 File 'ASPNETDB_983ed943e1fe49e3ae7fa189b823b238_DAT' cannot be restored to 'F:ASPNETDB.MDF'. Use WITH MOVE to identify a valid location for the file. Msg 5133, Level 16, State 1, Line 1 Directory lookup for the file "F:ASPNETDB_log.ldf" failed with the operating system error 3(The system cannot find the path specified.). Msg 3156, Level 16, State 3, Line 1 File 'ASPNETDB_TMP_log' cannot be restored to 'F:ASPNETDB_log.ldf'. Use WITH MOVE to identify a valid location for the file. Msg 3119, Level 16, State 1, Line 1 Problems were identified while planning for the RESTORE statement. Previous messages provide details. Msg 3013, Level 16, State 1, Line 1 RESTORE DATABASE is terminating abnormally.'
I Have just detached my SQL Server database, I am currently running SQL Server 2005, when I try to reattach it I get the error Cannnot open user default database - Login Failed
Today I recieved this alert from the SQL Server, when I want to attach database:
Server: Msg 823, Level 24, State 6, Line 1 I/O error (torn page) detected during read at offset 0000000000000000 in file 'D:Program FilesMicrosoft SQL ServerMSSQLdataDB Askes Apotik_Data.MDF'.
Connection Broken
I was Running dbcc checkdb repair_allow_data_loss with ALL_ERRORMSGS, NO_INFOMSGS yield the following:
Server: Msg 945, Level 14, State 2, Line 1 Database 'DB Askes Apotik' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
I've some really big problems with SQL Server 2005 Express. I Recently, I had 2 instances on my machine, one was a SQL Server 2000 Developer and the other a 2005 Express Version. The 2000 version was not necessary anymore, so I unstalled it, since then, the Express version keeps having probems.
Under the Server Properties -> Database settings -> Database Locations I've changed the path to D:sqldatamssql, but now, the programm always takes the "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData" to store and load the databases, no matter what I do.
And there are more problems see here:
Restoring does not work======================= I wanted to restore a database called "fw40_admin" from a backup file (.bak), but that didn't work at all, it always says this as an error:
"System.Data.SqlClient.SqlError: The operating system returned the error '5(error not found)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'D:sqldatamssqlfw40_admin.mdf'. (Microsoft.SqlServer.Express.Smo)"
But as soon as I type in the installation path "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData" inside the "Restore As" under "Options", it works.
Why does the backup only work in "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData", BUT the database locations under the server properties is indicated with "D:sqldatamssql"????
Attaching does not work======================= Attaching an existing database does not work either. Most databases (mdf) are located on the path D:sqldatamssql, but as soon as I press
Attach Databases -> Add
The dialog window appears with the "D:sqldatamssql" path, but it is unable to find any *.mdfs altough THERE ARE .mdfs in this directory. But Express can find databases in the selected installation: "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData". Why can't Express see the directory on the D: partition???
Database Restore & Attach Error I have a problem with restoring or attaching DB files from different version of the engine. I Have a existing SQL server 7.x and another one is SQL 2000 but I try to backup my database and restore it into the 2000 engine This is the following Problem which occurs :-
1st Problem : During Restoration, The restoration process was runing fine until it reach the last inficatior tab and it fail and say Database terminated abnormal. I been try to restore into other machine also but it give me the same problem.
2nd Problem : Say I can't restore but I stop the engine and manual copy the *.mdf and *.ldf to another machine. I try to restore it but it "is on a network device not supported for database files." So what shall I Do with it.
Pls Advise If anything need to be done before I do the restoring and anything need to be done in both 7.x and 2000 Engine.
hi to all I got a probelm with attaching the database. I hv Database Name called "ABC". it is working fine. (contain MDF,LDF files)
I got new BackFiles from CLient. They sent MDF and LDF Files. But i could't able to attach the database i got the following error while attaching the databse.
Server: Msg 5173, Level 16, State 2, Line 1 Cannot associate files with different databases.
I just found that the content of my Database "ssmsExpressDB" is gone, but the name "ssmsExpressDB" remains in the Object Explorer of SQL Server Management Studio Express. If I delected the name "ssmsExpressDB" and executed the following .sql:
Unable to open the physical file "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatassmsExpressDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)".
And I have closed all my projects and I do not know what " The process cannot access the file because it is being used by another process" is all about!? Please help and tell me how I can re-attach the content of my "ssmsExpressDB" in the Object Explorer of SQL Server Management Studio Express.
I found the "ssmsExpressDB" is being used by my VB 2005 Express project "Hello-SQLCLR-1": in the Database Explorer, Data Connections place. How can I put it back to the Object Explorer of SQL Server Management Studio Express? Please help and advise.
We have a log shipping database running on SQL 2000 ENT SP4, the secondary DB is in standby/read only mode . we have a job that runs every day to take it offline, make a copy of the files and attach them as a new database for reporting purposes.
We're planning to upgrade to SQL 2005 however, when we copy the Standby/read only database files and attach using "CREATE DAABASE FOR ATTACH" we get :
msg 1284 Cannot attach a database that was being restored.
this works in SQL 2000 but not SQL 2005, is there a way to force attach the DB ?
Can multiple instances of SQL 2005 Express attach to the same database files on a network share? I have seen this done before with MSDE where the database files are stored on the server, but instead of having a SQL server running on the network and then connecting to it, only the database files exist on the network share and the users connect through MSDE running on the local machine. Is this possible with SQL2005Express? I do not have the ability to share an SQL instance from one workstation to another nor do I have the ability to install an instance on the corporate server. Is it as simple as creating the database and storing the files on the share then attaching the database to the SQL Instance on each workstation?
I have used the copy database wizard, but I realized I had forgotten to shrink the transaction log file. So I canceled the wizard. My database, detached by the wizard, has now disappeared. The mdf file is still there, but when I try to attach it manually I get the "create file encountered operating system error 5 while attempting to open the physical file..." error.
Our GIS group is working with SQL Server 2005 in conjunction with ESRI's ArcGIS software. SQL Server is being used as a test bed until we formally migrate our existing Microsoft Access mdb's over. So, at this time we are conducting various tests and have the freedom to "blow up" our databases.
We are currently testing ArcSDE Workgroup edition, which will only work with SQL Server Express (SSE). SSE will let us create spatial joins and relationships, while maintaining data integrity. So one possible workaround was to detach the database from SQL Server 2005 and then attach it to SSE. Unfortunately, we ran into a problem in re-attaching the database back to SQL Server 2005.
The exact steps are as follows:
Back up database using back up tool in SQL Server 2005.
Detached database from SQL Server 2005.
Attached database to SQL Server Express (hereafter SSE).
Created a table in database while it was attached to SSE.
Detached database from SSE.
Attempt to attach database to SQL Server 2005 failed
Successfully restored database in SQL Server 2005 using Restore tool. Step number 6 above failed and generated the following error:
TITLE: Microsoft SQL Server Management Studio ------------------------------ Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) ------------------------------ CREATE FILE encountered operating system error 5(Access is denied.) while attempting to open or create the physical file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataLNRIS_SQL_Test.mdf'. (Microsoft SQL Server, Error: 5123) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=5123&LinkId=20476
Questions:
Why did I get this error?
Can incorrect or missing permission or ownership settings generate this kind of error?
I've just created my first projects using Visual Studio 2005 and SQL 2005 Express. This is the basic;
One windows service is created that updates a database. The windows service running under "Local system" account One windows application where a user can see data (and change) from the database A common business and dataaccess layer/project is used by both applications Connection string to the database: "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|DataDatabase.mdf;Integrated Security=True;Connect Timeout=60;User Instance=True"
Both application is located in the same directory. When the computer starts the windows service starts and works perfectly. But when a user starts the windows applications the following error is reported "An attempt to attach an auto-named database for file..A database with the same name exists, or specified file cannot be opened, or it is located on UNC share".
It look likes that only one of my application can connect to the database at a time!
Is it possible to use separate applications to connect to the same database file?
