Hi I am getting the following error:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 4/14/2004
Time: 09:32:05 AM
User: SYSTEM
Computer: BSEW2k01
Description:
Error: 50000, Severity: 5, State: 1
Error Calling StatusToStreet In DCS0 Code 7202
Please help.
Thanks
Hi All,
I see this error message on one of my servers Event Viewer..Can anyon tell me what it means and how to resolve it..
The library file "C:WINNTSystem32BEPerfDll.dll" specified for the "Backup Exec" service could not be opened. Performance data for this service will not be available. Status code is data DWORD 0.
Thanks,
Venu
I have a stored procedure that I use for call a aspx page from within SQL. The stored procedure itself runs finewith no errors but I keep getting errors in the event viewer everytimeit runs (with .vbs, .NET, .vb6 client) outside Enterprise manager or SQL Query Analyzer.....This is error:Error: 0, Severity: 19, State: 0SqlDumpExceptionHandler: Process 52 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.I think that this is the same problem seen inhttp://www.sqlmonster.com/Uwe/Forum...in-Event-ViewerI've test with XP sp2, W2003 server, SQL 2000 sp3a......on the same machine.ANY SUGGESTIONS??????Thanks--Message posted via http://www.sqlmonster.com
View 3 Replies View Related
Hi all,
Can we get the event properties by using a query?
Are there any extended stored procuder to get the above?
Scenario:
>Desktop>Right Click on My Computer
>Go to Manage and click
>Expand System Tools
>Expand Event Viewer
>Application
click on one event.We can get the log info which is the manual procudure.
But now i want to get the event properties through the Query analyzer...
Any help would be great?
Thanks,
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
I tried to save an event viewer file as a .txt format file and when I open the saved file, it's not readable.
Can someone have an idea of what format should I save the event viewer file so I will be able to view it's contents?
Thanks in advance!!
My boss has now decided that he doesnt want to see SQL errors in the event viewer, unless they are actual errors.
The two errors are:
A - When the DB log is truncated it goes into the event viewer as an error. This needs to either not go into the event viewer at all, or be classed as something other than an error.
B - "Sqllib error: Database x is not simple." This one I dont even know what causes it, but the same thing applies, either it shouldnt be logged, or it needs to be logged as something other than an error. Although what does cause this message?
Any help on these would be appresiated
Thanks :)
Hi guys
i am puzzled on how to decipher the below msg on my sql server
Had tried adjusting the settings but apparantly doesnt work
is this due to my license or what other reasons?
Error msg:
17052 :
This SQL Server has been optimized for 8 concurrent queries. This limit has been exceeded by 30 queries and performance may be adversely affected.
sql server : MS SQL Enterprise 8.0
Hi for everyone!
I need any example to use raise error that write into event Viewer I use WITH LOG directive
but it's no success.
Sincerely.
FAin Boris
Hi
Can anyone tell me what this warning message in the Quotes below...
I get this on one of our servers every 15 minutes in the event Viewer..
Here is the message in the event Viewer..
"Replication of license information failed because the License Logging Service on server PSNJRPDC could not be contacted."
Thanks All,
Venu
Hello Everyone:
I'm in the process of verifying that all functionality in a version 6.5 database is still there in SQL 7.0. After the upgrade, one issue seems different.
When I attach to a SQL 6.5 database, the full username used in the connection is displayed in the Windows NT Event Viewer. But when I attach to the same database in SQL 7, the username shows up in the Event Viewer as 'N/A'. I've verified that audit permissions are set the same on both boxes both under SQL and in User Manager. Any ideas??
l am trying to see how to export event veiwer log to database(mssql) and incremental updates.
sql MS server and with window 2000
if anyone knows how to do this in .net or third party software pls let me know.
Is there a way to handle an event when the report viewer has completed loading the report? I have handled the report viewer load event but also want to handle an event for when it has completed loading.
I am wanting this because the "report is being generated" message is far off of the screen when I use a large report viewer.
So, on page load I simply make a textbox visible that says "report is being generated". When it completes generating the report, I want it to make that message invisible.
The disposed and unload events don't seem to handle this correctly.
Hi all,
I want send messages(e.g. error description,record count...)to NT event viewer,how can I implement with sql?
thanks
Hi everyone,
I was wondering how do for 'Log Events' info going to Event Viewer Windows visor. Is it possible or it's just only private info for you SSIS.
Thanks for your input,
How do I prevent SQL Server 2000 from posting successful backupcompletion messages to the Windows 2000 Application Event Log?I have scheduled jobs which backup my transaction logs on 50+ databasesand it always writes to the Windows 2000 application event log uponcompletion.Due to the frequency of the jobs it only takes a day for theApplication Log to fill up, which is causing other jobs to get hung upwhen trying to write to it. On my Windows 2000 server, I have theapplication log event viewer setting correctly set as:"When maximum log size is reached - Overwrite events as needed" but forsome reason this setting no longer applies like it did for the pastthree years. SQLServerAgent and MSSQLSERVER both run under a localAdmin account, without a domain.When I researched how prevent SQL Server from logging this type ofmessage, I found that I can use sp_update_alert to disable thismessage, but I cannot findthe message_id to correctly disable this message. In sysmessages, themessage I am trying to suppress iserror:18265severity:10dlevel:128description:Log backed up: Database:%1, creation date(time): %2(%3), first LSN: %4, last LSN: %5, number ofdump devices: %7!d!, device information: (%8).mslangid:1033I tried calling sp_update_alert as follows:exec sp_update_alert @name = 'Log backed up: Database: %1, creationdate(time): %2(%3), first LSN: %4, last LSN: %5, number of dumpdevices: %7!d!, device information: (%8).', @enabled = 0but got the error message:Server: Msg 14262, Level 16, State 1, Procedure sp_update_alert, Line105The specified @name ('Log backed up: Database: %1, creation date(time):%2(%3), first LSN: %4, last LSN: %5, number of dump devices: %7!d!,device inf') does not exist.Looks like it can only handle 128 characters.How can I disable this message from being logged in the ApplicationLog? Or alternatively, how can I get the event viewer to behave asexpected and"Overwrite events as needed"?Thanks,Mike Orlando
View 9 Replies View RelatedHello,
I have almost finished to design my Service Broker application and I found out something strange.
I was tring to handle the Target queue disabled scenario, because I want to save to message that was not sent so I can create an alert to the user to say that some messages as not been sent.
To disable to queue I run:
Alter queue [dbo].[Receivedqueue] with status = off
I had the Event Viewer in front of me and I have seen the suddenly it appeared a lot of this informational events:
Event Type: Information
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 9724
Date: 15/06/2007
Time: 15:00:47
Description:
The activated proc [dbo].[OnReceived] running on queue TestReceiver.dbo.Receivedqueue output the following: 'The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.'
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
What this message means?
I would like to avoid to have it because it appears a lot of time and I don't want to fill up my Event Viewer!!
I don't know of it is important but in the moment I executed the code there was not CONVERSING conversation and all the queues were empty.
Somebody has seen this error before or I have to send to the forum the [dbo].[OnReceived] code as well?
thankx
Marina B.
Server 2003 SE SP1 5.2.3790 Sql Server 2000, SP 4, 8.00.2187 (latest hotfix rollup)
We fixed one issue, but it brought up another. the fix we applied stopped the ServicesActive access failure, but now we have a failure on MSSEARCH. The users this is affecting do NOT have admin rights on the machine, they are SQL developers.
We were having
Event Type: Failure Audit
Event Source: Security
Event Category: Object AccessEvent ID: 560
Date: 5/23/2007
Time: 6:27:15 AM
User: domainuser
Computer: MACHINENAME
Description:
Object Open:
Object Server: SC Manager
Object Type: SC_MANAGER OBJECT
Object Name: ServicesActive
Handle ID: -
Operation ID: {0,1623975729}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: Domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: User
Client Domain: Domain
Client Logon ID: (0x0,0x6097C608)
Accesses: READ_CONTROL
Connect to service controller
Enumerate services
Query service database lock state
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x20015
Applied the following fix
http://support.microsoft.com/kb/907460/
Now we are getting
Event Type: Failure Audit
Event Source: Security
Event Category: Object Access
Event ID: 560
Date: 5/23/2007
Time: 10:51:23 AM
User: domainuser
Computer: MACHINE
Description:
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: MSSEARCH
Handle ID: -
Operation ID: {0,1627659603}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: user
Client Domain: domain
Client Logon ID: (0x0,0x60D37C1A)
Accesses: READ_CONTROL
Query service configuration information
Query status of service
Enumerate dependencies of service
Query information from service
Privileges: - Restricted Sid Count: 0 Access Mask: 0x2008D
Greetings,
I am developing a package on my local workstation. I have defined two logging service providers. One is for SQL Server and the other is for the Windows Event Log. I am using the Dts.Log method in a script task to write log entries.
Logging is working properly with the SQL Server provider and rows are being inserted into the sysdtslog90 table. However, the only events that are being logged in the Windows Event Log are the package start and end events which I believe SSIS is doing automatically anyway.
Is there something I need to do to enable WIndows Event Log logging other than defining a log provider and making sure it is checked active? Won't SSIS write to two different logs with one Dts.Log call? Any ideas on what might be going wrong with my approach?
Thanks,
BCB
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
Hi there
I have recently installed a new server for a client running SBS2003 R2 with SQLServer 2005.
I noted that the backup failed the SQL Server database on the consistenty check. On checking the event log I see this message as per above.
It reads in the description
c:datalawsqldatadata41_Data.MDF:MSSQL_DBCC6:
Operating system error 112(error not found) encountered.
Looking in the error log I see :
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.
Error: 17053, Severity: 16, State: 1.
C:DataLAWsqldatadata41_Data.MDF:MSSQL_DBCC6: Operating system error 112(error not found) encountered.
DBCC CHECKDB (data41) WITH no_infomsgs executed by NT AUTHORITYSYSTEM found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 26 seconds.
This is a new server with about 90% of disk space NTFS still available
Any idea's thanks.
Hi, I am getting the following error when I try to open up my web application now, after installing the report viewer add on and placing it onto one of my pages.
Parser Error Message: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=nutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system could not find the file specified.
Source Error:
Line 47: <add assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
Source File: web.config
So far I have tried to fix this error by installing the reportviewer.exe on the server. I have also verified that the ReportViewer files are in the assembly folder on the server. I also found a site saying to run the reportviewer.exe from a specific location, here is the link
http://dotnetslackers.com/_NET/re-49414_Could_not_load_file_or_assembly_Microsoft_ReportViewer_WebForms.aspx
but when I try to browse to the folder it is talking about I found out that I don't even have a BootStrapper folder under Microsoft Visual Studio 8/SDK/v2.0
Does anyone have any ideas on how to fix this error?
I have successfully created and processed a mining structure (decision tree). However, when I try to generate the tree graph, I am getting the following error:
TITLE: Microsoft Visual Studio
------------------------------
The tree graph cannot be created because of the following error:
'Object reference not set to an instance of an object.'.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.AnalysisServices.Viewers.SR&EvtID=ErrorCreateGraphFailed&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Object reference not set to an instance of an object. (Microsoft.AnalysisServices.Viewers)
------------------------------
BUTTONS:
OK
------------------------------
...with the following technical details
===================================
The tree graph cannot be created because of the following error:
'Object reference not set to an instance of an object.'. (Microsoft Visual Studio)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.AnalysisServices.Viewers.SR&EvtID=ErrorCreateGraphFailed&LinkId=20476
===================================
Object reference not set to an instance of an object. (Microsoft.AnalysisServices.Viewers)
------------------------------
Program Location:
at Microsoft.AnalysisServices.Viewers.TreeViewerBase.GetTooltipText(TreeGraphNode treeNode)
at Microsoft.AnalysisServices.Viewers.TreeViewerBase.predictionTreeComboBox_SelectedIndexAction()
Has anyone encountered this same error?
I am trying to integrate reports that I have built with VS 2005 and deployed to my report server locally.
The path to the report is
http://SERVERNAME/Reports/Pages/Report.aspx?ItemPath=%2fBilling+System+Reports%2fBasic+Financial+Reports%2fBasic+Financial+Statistics+-+TimeKeeper+YTD
When I put that into the "Report" parameter the web part display an error:
The report server has encountered a configuration error. See the report server log files for more information
And when I click on the ellipses, I get a pop up with the same error.
I installed SQL2005 SP2 and the RS Add on for MS sharepoint CTP
Any help would be great!
Thanks,
Erik
Parser for XMLA (XML for Analysis): Timeout geting XMLA-Request (XML for Analysis).
Error when executing the administrated stored procedure 'GetItemsets': Exception has been thrown by the target of an invocation.Microsoft::AnalysisServices::AdomdServer::AdomdException.
I get this Error in Miningmodel-Viewer, what to do? This occurs when I set the MAXIMUM_ITEMSET_COUNT to 1,500,000 .
I have read the threads regarding the Neural Network Viewer and I think I have a similar problem. I do have Service Pack 2 installed and I'm running the x64 version of SQL 2005.
I'm building a model from a single relational CASE table. Granted the table has many columns summarized at the customer level but there are it is well formed and has no NULL values (plenty of zero or blank values though). The only time I can get the NN Viewer to work is when I accept the attribute recommendations. It seems once I stray from these recommendation, even if there is still correlation with an attribute, I cannot view the model using the NN Viewer. My latest error message says:
"The provider could not determine the String value. For example, the row was just created, the default for the String column was not available, and the consumer had not yet set a new String value."
I get this message even when all input attributes are Continuous so I'm not sure what String column it is referring to.
Any help is greatly appreciated. I'm in a time crunch and I have sold the client on SQL Server 2005 capabilities. It's a bit embarrasing if I can't get this resolved.
-- Steve
P.S.: I don't recall having any issues with the NN Viewer prior to Service Pack 2 (although others have). Have you done regression testing to test this issue?
Hello,
I don't know if this is the correct forum or if it would perhaps be the server setup & upgrade, however, I'll ask here first. I am going through the SQL 2005 data mining tutorials and have encountered an error that states:
Query (1,6) The '[System].[Microsoft].[AnalysisServices].[System].[DataMining].[AssociationRules].[GetStatistics]' function does not exist.
After looking around for a bit it appeared that this function is generally used in a stored procedure run from the server. Is this correct? What do I need to do to either correctly import the function into the project or to make sure that it is installed on the server?
We are running the Ent Ed. now, however, we just upgraded to this after I had already started on this project. Could that be a problem?
Any help on this would be greatly appreciated.
Thanks for your time.
Eric Wisdahl
I have created a report on my local machine and deployed it on a server. As I am the administrator of the server, I can access the reports with servernameReports. The report has got three data sets. Out of these three one is a Stored procedure and other two data sets have sql queries. The user selects the 'Business year' and 'sales type' from list box. This report works perfect from my local machine as well as from teh server when I am running it
I have some other users who wish to access these reports. I did the following steps:
Created a new role and assigned it at the Data Source Folder and Reports Folder
I also made the user a Database user on the server.
After doing these steps, the user can access the Reports site by servernameReports.
The user then can go into the Reports folder. But when the user tries to run the report, he gets an error with:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'BusinessYear'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Can anyone help me with this? Is htere something to do with setting up of the datasource?
I have tried to search, but could not find relevant info.
Any help/Pointers will be really appreciated.
regards
Joshker
Hi,
We have a solution where we from a Windows application (using the report viewer control SP1) display some reports. Some of the reports uses a custom report item to display some graphics. This works fine on a lot of different installations, but now (for some reason) we have a problem at one customer.
We get strange GDI and transport errors when rendering these reports:
"Unable to read data from the transport connection: The connection was closed."
or
"Remote GDI stream version: 10.0.1. Expected version 10.0.1. Offset and length were out of bounds for the array or count is greater than the number of elements from the index to the end of the source collection."
These report work fine when you run them in the browser, but they never work in the report viewer control...
Please provide some help.
Kind Regards
Sune
I am developing a multiple regression model for a super market site selection with 11 predictors.
As soon as I press the model viewer tab, the following message appears:
The server content appears to be out of date.
Would you like to build and deploy the project first?
I opt no and the error message pops up:
The tree graph cannot be created because of the following error:
'Either the user, ......., does not have access to the ....... database, or the database does not exist.'.
Could anyone mine out the cause please....
saji
Parser Error Message: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
I'm not sure what to do to fix this. I've downloaded the redistributable for the report viewer. Please help, I need to have this before the weekend is over.
Thanks,
Hi All,
I am deploying my reports on to the report viewer on a Sharepoint site. I wanted to know how to handle exception in the reports here. I was looking for exception handling in SSRS, but most of them are given with respect to displaying reports in ASP.NET pages. Is there any way I can configure Report Viewer to display friendly error messages instead of the vague error messages displayed from SSRS.
Thanks,
S Suresh
Hi
We are having problems with our application that uses SQL Server 2005 in a cluster environment. Sometimes the system stops answering and registers in the log viewer the following error:
=====================================================================
BugCheck Dump
=====================================================================
This file is generated by Microsoft SQL Server
version 9.00.1399.06
upon detection of fatal unexpected error. Please return this file, the query or program that produced the bugcheck, the database and the error log, and any other pertinent information with a Service Request.
Computer type is AT/AT COMPATIBLE.
Bios Version is IBM - 1001
Current time is 16:48:36 12/05/06.
2 Intel x86 level 15, 3600 Mhz processor (s).
Windows NT 5.2 Build 3790 CSD Service Pack 1.
Memory
MemoryLoad = 74%
Total Physical = 3327 MB
Available Physical = 858 MB
Total Page File = 9318 MB
Available Page File = 7058 MB
Total Virtual = 2047 MB
Available Virtual = 274 MB
**Dump thread - spid = 132, PSS = 0x71E09588, EC = 0x71E09590
***Stack Dump being sent to E:Microsoft SQL ServerMSSQL.1MSSQLLOGSQLDump0178.txt
* *******************************************************************************
*
* BEGIN STACK DUMP:
* 12/05/06 16:48:36 spid 132
*
* Location: lckmgr.cpp:10820
* Expression: GetLocalLockPartition () == xactLockInfo->GetLocalLockPartition ()
* SPID: 132
* Process ID: 2436
*
* Input Buffer 255 bytes -
* 16 00 00 00 12 00 00 00 02 00 01 00 00 00 84 00 00 00
* ΓΏΓΏ Γ§d Γ? 01 00 00 00 ff ff 0a 00 02 00 00 00 e7 64 09 09 04 d0
* 4d S E L E C T 00 34 64 09 20 00 53 00 45 00 4c 00 45 00 43 00 54 00
* TAbleA (*) 20 00 54 00 48 00 69 00 73 00 74 00 6f 00 72 00 69 00
(*) There is a query here that I have excluded in the message
*
* MODULE BASE END SIZE
* sqlservr 01000000 02BA7FFF 01ba8000
* ntdll 7C910000 7C9D3FFF 000c4000
* kernel32 7C800000 7C90BFFF 0010c000
* MSVCR80 78130000 781CAFFF 0009b000
* msvcrt 77B90000 77BE9FFF 0005a000
* MSVCP80 7C420000 7C4A6FFF 00087000
* ADVAPI32 77D90000 77E3DFFF 000ae000
* RPCRT4 77C40000 77CDEFFF 0009f000
* USER32 77F40000 77FD1FFF 00092000
* GDI32 77BF0000 77C37FFF 00048000
* CRYPT32 760D0000 76164FFF 00095000
* MSASN1 760B0000 760C1FFF 00012000
* Secur32 76E70000 76E82FFF 00013000
* MSWSOCK 71970000 719B1FFF 00042000
* WS2_32 71A50000 71A66FFF 00017000
* WS2HELP 71A40000 71A47FFF 00008000
* USERENV 76840000 76904FFF 000c5000
* opends60 333E0000 333E6FFF 00007000
* NETAPI32 71A90000 71AE7FFF 00058000
* SHELL32 7C9E0000 7D1EAFFF 0080b000
* SHLWAPI 77EE0000 77F31FFF 00052000
* comctl32 77360000 77462FFF 00103000
* EntApi 37000000 37012FFF 00013000
* PSAPI 76A90000 76A9AFFF 0000b000
* WININET 779D0000 77A78FFF 000a9000
* OLEAUT32 77CF0000 77D7BFFF 0008c000
* ole32 77510000 77643FFF 00134000
* instapi 48060000 48069FFF 0000a000
* CLUSAPI 74CF0000 74D01FFF 00012000
* RESUTILS 74E00000 74E12FFF 00013000
* sqlevn70 4F610000 4F7A0FFF 00191000
* SQLOS 344D0000 344D4FFF 00005000
* rsaenh 68000000 6802EFFF 0002f000
* AUTHZ 76B60000 76B73FFF 00014000
* MSCOREE 340C0000 34104FFF 00045000
* msv1_0 76BB0000 76BD6FFF 00027000
* iphlpapi 76C10000 76C29FFF 0001a000
* kerberos 34330000 34387FFF 00058000
* cryptdll 76600000 7660BFFF 0000c000
* schannel 76670000 76696FFF 00027000
* COMRES 76F30000 770BCFFF 0018d000
* XOLEHLP 343F0000 343F5FFF 00006000
* MSDTCPRX 34400000 34477FFF 00078000
* msvcp60 780C0000 78120FFF 00061000
* MTXCLU 74E50000 74E68FFF 00019000
* VERSION 77B80000 77B87FFF 00008000
* WSOCK32 71A00000 71A09FFF 0000a000
* DNSAPI 76DF0000 76E1EFFF 0002f000
* winrnr 76E90000 76E96FFF 00007000
* WLDAP32 76E30000 76E5EFFF 0002f000
* rasadhlp 76EA0000 76EA7FFF 00008000
* hnetcfg 36190000 361E8FFF 00059000
* wshtcpip 71930000 71937FFF 00008000
* security 36340000 36343FFF 00004000
* msfte 36A60000 36CB7FFF 00258000
* dbghelp 36D00000 36E17FFF 00118000
* WINTRUST 76AD0000 76AFAFFF 0002b000
* imagehlp 76B30000 76B58FFF 00029000
* dssenh 68100000 68123FFF 00024000
* NTMARTA 777B0000 777D1FFF 00022000
* SAMLIB 36FE0000 36FEEFFF 0000f000
* ntdsapi 76610000 76624FFF 00015000
* xpsp2res 61BF0000 61EBFFFF 002d0000
* CLBCatQ 77650000 776D2FFF 00083000
* sqlncli 61EC0000 620E1FFF 00222000
* COMCTL32 77E40000 77ED6FFF 00097000
* comdlg32 761D0000 76218FFF 00049000
* SQLNCLIR 007C0000 007F2FFF 00033000
* msftepxy 621F0000 62204FFF 00015000
* xpsqlbot 62860000 62865FFF 00006000
* xpstar90 62880000 628C4FFF 00045000
* SQLSCM90 628E0000 628E8FFF 00009000
* ODBC32 62900000 6293CFFF 0003d000
* BatchParser90 62940000 6295DFFF 0001e000
* SQLSVC90 62970000 62989FFF 0001a000
* SqlResourceLoader 629A0000 629A5FFF 00006000
* ATL80 7C630000 7C64AFFF 0001b000
* odbcint 62B00000 62B17FFF 00018000
* SQLSVC90 62B20000 62B22FFF 00003000
* xpstar90 62B30000 62B55FFF 00026000
* xplog70 62B60000 62B6BFFF 0000c000
* xplog70 62B80000 62B82FFF 00003000
* oledb32 631B0000 63228FFF 00079000
* MSDART 63230000 63249FFF 0001a000
* OLEDB32R 634D0000 634E1FFF 00012000
* activeds 76D10000 76D42FFF 00033000
* adsldpc 76CE0000 76D06FFF 00027000
* credui 76AA0000 76ACDFFF 0002e000
* ATL 769A0000 769B7FFF 00018000
* adsldp 71110000 7113DFFF 0002e000
* SXS 75CB0000 75D6BFFF 000bc000
* dbghelp 65D40000 65E52FFF 00113000
*
* Edi: 6610BCB8: 636A1900 3E3A6040 62F1A040 6610D8AD 0279E900 3E3A63D8
* Esi: 00000000:
* Eax: 6610BB9C: 000042AC 00000000 00000000 7C815E02 00000000 7C931B34
* Ebx: 0000003F:
* Ecx: 6610C20C: 00000000 00010007 00000000 00740072 636A1904 6610BBCC
* Edx: 0000003D:
* Eip: 7C815E02: 10C2C95E 90909000 A1649090 00000018 C334408B 891C428B
* Ebp: 6610BBEC: 6610BC30 02172CE4 000042AC 00000000 00000000 00000000
* SegCs: 0000001B:
* EFlags: 00000246:
* Esp: 6610BB98: 71E09588 000042AC 00000000 00000000 7C815E02 00000000
* SegSs: 78130023: 00000000 00000000 00000000 00000000 00000000 00000000
* *******************************************************************************
* -------------------------------------------------------------------------------
* Short Stack Dump
7C815E02 Module(kernel32+00015E02)
02172CE4 Module(sqlservr+01172CE4)
02176BA0 Module(sqlservr+01176BA0)
02019506 Module(sqlservr+01019506)
015738EE Module(sqlservr+005738EE)
021B15B6 Module(sqlservr+011B15B6)
0163DD36 Module(sqlservr+0063DD36)
010E9FA3 Module(sqlservr+000E9FA3)
010B0F5F Module(sqlservr+000B0F5F)
0102C5F8 Module(sqlservr+0002C5F8)
01BEE12B Module(sqlservr+00BEE12B)
01BF2BCB Module(sqlservr+00BF2BCB)
01BF353D Module(sqlservr+00BF353D)
010438E5 Module(sqlservr+000438E5)
01041C35 Module(sqlservr+00041C35)
0100889F Module(sqlservr+0000889F)
010089C5 Module(sqlservr+000089C5)
010086E7 Module(sqlservr+000086E7)
010D764A Module(sqlservr+000D764A)
010D7B71 Module(sqlservr+000D7B71)
010D746E Module(sqlservr+000D746E)
010D83F0 Module(sqlservr+000D83F0)
781329AA Module(MSVCR80+000029AA)
78132A36 Module(MSVCR80+00002A36)
PSS @0x71E09588
---------------
CSession @0x71E08278
--------------------
m_spid = 132 m_cRef = 12 m_rgcRefType[0] = 1
m_rgcRefType[1] = 1 m_rgcRefType[2] = 9 m_rgcRefType[3] = 1
m_rgcRefType[4] = 0 m_rgcRefType[5] = 0 m_pmo = 0x71E08040
m_pstackBhfPool = 0x00000000 m_dwLoginFlags = 0x03e0 m_fBackground = 0
m_fClientRequestConnReset = 0 m_fUserProc = -1 m_fConnReset = 0
m_fIsConnReset = 0 m_fInLogin = 0 m_fReplRelease = 0
m_fKill = 0 m_ulLoginStamp = 3105683 m_eclClient = 5
m_protType = 5 m_hHttpToken = FFFFFFFF
m_pV7LoginRec
---------------------
00000000: 18010000 02000972 401f0000 00000006 400c0000 .......r@.......@...
00000014: 00000000 e0030000 00000000 00000000 5e000400 ................^...
00000028: 66000200 6a000000 7a001c00 b2000c00 ca000000 f...j...z...........
0000003C: ca001c00 02010000 02010b00 60f120db ad481801 ............`. ..H..
00000050: 00001801 00001801 00000000 0000 ..............
CPhysicalConnection @0x71E08188
-------------------------------
m_pPhyConn->m_pmo = 0x71E08040 m_pPhyConn->m_pNetConn = 0x71E08788 m_pPhyConn->m_pConnList = 0x71E08260
m_pPhyConn->m_pSess = 0x71E08278 m_pPhyConn->m_fTracked = -1 m_pPhyConn->m_cbPacketsize = 8000
m_pPhyConn->m_fMars = 0 m_pPhyConn->m_fKill = 0
CBatch @0x71E08A90
------------------
m_pSess = 0x71E08278 m_pConn = 0x71E089F0 m_cRef = 3
m_rgcRefType[0] = 1 m_rgcRefType[1] = 1 m_rgcRefType[2] = 1
m_rgcRefType[3] = 0 m_rgcRefType[4] = 0 m_pTask = 0x006F9D38
EXCEPT (null) @0x6610B4AC
-------------------------
exc_number = 0 exc_severity = 0 exc_func = 0x023D96B0
Task @0x006F9D38
----------------
CPU Ticks used (ms) = 1 Task State = 2
WAITINFO_INTERNAL: WaitResource = 0x00000000 WAITINFO_INTERNAL: WaitType = 0x0
WAITINFO_INTERNAL: WaitSpinlock = 0x00000000 SchedulerId = 0x0
ThreadId = 0x444 m_state = 0 m_eAbortSev = 0
EC @0x71E09590
--------------
spid = 132 ecid = 0 ec_stat = 0x0
ec_stat2 = 0x40 ec_atomic = 0x4 __fSubProc = 1
ec_dbccContext = 0x00000000 __pSETLS = 0x71E08A30 __pSEParams = 0x71E08CD0
__pDbLocks = 0x71E09878
SEInternalTLS @0x71E08A30
-------------------------
m_flags = 0 m_TLSstatus = 3 m_owningTask = 0x006F9D38
m_activeHeapDatasetList = 0x71E08A30 m_activeIndexDatasetList = 0x71E08A38
SEParams @0x71E08CD0
--------------------
m_lockTimeout = -1 m_isoLevel = 1048576 m_logDontReplicate = 0
m_neverReplicate = 0 m_XactWorkspace = 0x03F78940 m_pSessionLocks = 0x71E09A88
m_pDbLocks = 0x71E09878 m_execStats = 0x3F867018 m_pAllocFileLimit = 0x00000000
Does anybody know whats going on?
I will be very appreciate if someone can help me to solve this problem. Thank you!