I'm trying to run a SQL Server 7.0 scheduled job that executes: Exec master..xp_cmdshell 'd:raining.bat'
If I run this in qry analyzer it runs fine. If I try to run it as a scheduled job it says 'can't find the specified file'
I'm a member of the sysadmins group and sqlexecagent is part of the NT admin group.
Can someone tell me how to fix this problem?
HelloI am trying to execute ‘xp_cmdshell' from within a DTS package thatwas created by another person. When I try to execute that ‘SQL Task'selectively from within the package, I get the following errormessage:Error Title: Package ErrorError Details:Error Source: Microsoft OLE DB Provider for SQL ServerError Description: xpsql.cpp: Error 87 from GetProxyAccount on line604Why is this error message popping up? When I create a new package(myself) and create an exact same SQL task as above and run it, theSQL task runs fine.Appreciate any help / feedback.Thanks in AdvanceJagannathan Santhanam
View 1 Replies View RelatedHi, I need to send a table data into flat and then ftp into different location.
I was using xp_cmdshell via sql task but my network engineer is saying that this xp_cmdshell will break the security and recomond to use "Execute Process Task". If i'm using this task getting the below error.
Could you advice me regrding network engineer thought and any solution for avoiding this error.
---------------------------
Execute Process Task: C:WINDOWSsystem32ftp.exe
---------------------------
CreateProcessTask 'DTSTask_DTSCreateProcessTask_1': Process returned code 2, which does not match the specified SuccessReturnCode of 0.
---------------------------
Thanks,
I have a stored proc that attempts to execute xp_cmdshell using a login other than 'sa'. The permissions have been given to the login to execute xp_cmdshell and the stored procedure executes perfectly within the query analyzer in EM. However, when attempting to execute the same stored proc in ISQL_W under a login with permissions for everything as dbo (other than Master) I get error 1326 for LogonUser on line 359. This is with the "xp_cmdshell - Use SQLExecutiveCmdExec Account for Non SAs" disabled (as described as a "workaround" on the technet). Microsoft acknowledged this as being a 'bug' to 'fix' and put a 'fix' in Service Pack 5a. The server that is experiencing this problem is running service pack 5. Is there any difference between the service packs and if so, will installing service pack 5a help me? And if not, what can be done to alleviate this problem?
View 1 Replies View RelatedI'm trying to run a .vbs file through the xp_cmdshell sp. It works fine, but if there's an error in the vbscript, the xp_cmdshell will just hang.
When I run the file from the command line, an error dialog box comes up expecting you to click ok. Sql just hangs waiting for this to be resolved.
Anyone have any ideas about how to get around this?
thanks
Hi everybody,
I am getting an error while running the XP_CMDSHELL 'NET USER /DOMAIN'.
But when I run the same command for sp_cmdshell 'net user' it works fine. It giving me the local users that are available on the my local pc. But now i want the domain users on my network which is not working with the xp_cmdshell..
Thanks in advance......
Hi all,
SQL Server 2000 SP3a, SAN Connection, Standard Edition, 2000 Server edition OS.
I've implemented a log shipping program on one set of sql servers already, the SVR1 set, which are working fine.
I am implementing this on the SVR2 set and I have the wrapperread() problem.
All using SP3a, with MDAC version outlined below. All are reported to be running the SP1 Refresh.
SVR1 - 2.7 SP1 Refresh
SVR1_DR - 2.7 SP1 Refresh
SVR2 - 2.7 SP1 / 2.7 SP1 Refresh
SVR2_DR - 2.7 SP1 / 2.7 SP1 Refresh
When executing the command below in T-SQL I get the error below.
EXEC @sentok = master.dbo.xp_cmdshell @cmd
[Microsoft][ODBC SQL Server Driver][Named Pipes]ConnectionRead (WrapperRead()).
Server: Msg 11, Level 16, State 1, Line 0
Any help would be gratefully accepted.
Regards,
JS
i am getting followig error while using xp_cmdshell
can anyone help regarding this
Message
Description: [SQL-DMO]The name 'SPS90HFD1DSQLServer2005MSFTEUser$RAJServer$MSSQL' was not found in the Users collection. If the name is a qualified name, use [] to separate various parts of the name, and try again. [SQLSTATE 01000] (Message 0) An error occurred during the execution of xp_cmdshell. A call to 'CreateProcess' failed with error code: '1455'. [SQLSTATE 42000] (Error 15121). The step failed.
I keep getting a "Incorrect syntax error near ' -Q''' " which is at the end of my xp_cmdshell line. What am I doing wrong?
CREATE Procedure dbo.sp_ImportRawData
(@ClientAbbrev nchar(4), @FileDate nvarchar(8), @SessionId nvarchar(50) )
AS
DECLARE @Msg varchar(255)
DECLARE @DataUpdates nvarchar(255)
DECLARE @Common nvarchar(255)
DECLARE @UServer nvarchar(255)
DECLARE @FullFileName nvarchar(68)
DECLARE @FileName nvarchar(64)
DECLARE @FileExt nvarchar(3)
DECLARE @SQL varchar(3500)
DECLARE @triFileName nvarchar(255)
Declare @Ip_FileName nvarchar(255)
Declare @Ip_Active char(1)
select @UServer = sd_value from Msysdata Where SD_Property = 'UpDateServer'
select @Common = sd_value from Msysdata WHERE SD_Property = 'CommonDir'
select @DataUpdates = sd_Value from Msysdata WHERE SD_Property = 'DataUpdate'
Set @UServer = @UServer + 'D$'
SET @Msg = 'Truncate tri_ active files'
EXEC MARS_SYS.dbo.sp_WriteLog @ClientAbbrev, 'UpdateMgr', @Msg, @FileDate, @SessionId
Declare ActiveFile Cursor For
Select Ip_FileName, Ip_Active from tbl_InputFiles
where Ip_Active = 'Y'
Open ActiveFile
Fetch Next From ActiveFile
Into @Ip_FileName, @Ip_Active
While @@Fetch_Status = 0
Begin
Exec('truncate table tri_'+ @Ip_FileName)
Set @FullFileName = @Ip_Filename + '.csv'
set @UServer = ''
set @Common = ''
set @triFileName = 'tri_' + @Ip_FileName
set @sql = 'master..xp_cmdshell ''' + @UServer + @Common + 'd:mars_syscommonscriptsodbcbcp -D CopyMedMgr10_Testing -i D:mars_sysdataupdatesccbm' + @FullFileName + ' -Q''' + @triFileName
exec(@SQL)
Fetch Next From ActiveFile
Into @Ip_FileName, @Ip_Active
End
CLOSE ActiveFile
DEALLOCATE ActiveFile
I am getting the following error when running a command in QueryAnalyzer.Msg 50001, Level 1, State 50001xpsql.cpp: Error 5 from CreateProcess on line 675Here is the command that I am running that generates this errormessage:xp_cmdshell "@ECHO test message > c: empewtemp.txt"The command inside the xp_cmdshell command runs successfully from aWindows command prompt. Simpler commands also fail with the same errormessage. For example:xp_cmdshell 'dir'Can anyone suggest a solution to this problem? I assume this problem isdue to a permissions/security issue. I have given Everyone Full Controlover c: emp.Windows 2000SQL Server 2000Thanks for any help.
View 4 Replies View RelatedI'm trying execute DTSX-package
Code Block
exec master..xp_cmdshell '"C:Program Files (x86)Microsoft SQL Server90DTSBinndtexec.exe" /FILE ...'
But have got error
Code Block
'C:Program' is not recognized as an internal or external command,
for some reason it doesn't work!
Or xp_cmdshell doesn't work with long filenames?
EXEC xp_cmdshell 'dir *.exe'
Msg 50001, Level 1, State 50001
xpsql.cpp: Error 1326 from LogonUserW on line 620
I have followed following document completely with no problem but yet system generate above error
http://www.support.microsoft.com/kb/890775
before that I used to get following error that is one of the described scenario in that document
Msg 50001, Level 1, State 50001
xpsql.cpp: Error 87 from GetProxyAccount on line 499
Configuration:
SBS2000 Premium (Includes SQL 2000)
User: a regular with PUBLIC access on MASTER
some one can tell if i can make a "where" clause inside the BCP , when i say : select * FROM tbl where flag=N , usually the where flag='N' works with the ' ' , but it gives no error when save the store procedure without it ' ' saves nicely the SP,
but
like this it saves well "SELECT * FROM tbl where flag=N" and
when i execute it, give a sql statement error "Error = [Microsoft][SQL Native Client][SQL Server]Invalid column name N."
i dont now , any help
PS: perhaps at the end of the BCP ---> -c -T , must have some more or less
I receive the following error message when I try to use the Bulk Insert Task to load BCP data into a table:
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 4. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (overflow) for row 1, column 1 (rowno).".
Task failed: Bulk Insert Task
In SSMS I am able to issue the following command and the data loads into a TableName table with no error messages:
BULK INSERT TableName
FROM 'C:DataDbTableName.bcp'
WITH (DATAFILETYPE='widenative');
What configuration is required for the Bulk Insert Task in SSIS to make the data load? BTW - the TableName.bcp file is bulk copy file as bcp widenative data type. The properties of the Bulk Insert Task are the following:
DataFileType: DTSBulkInsert_DataFileType_WideNative
RowTerminator: {CR}{LF}
Any help getting the bcp file to load would be appreciated. Let me know if you require any other information, thanks for all your help.
Paul
BCP thru xp_cmdshell from stored procedure:
EXEC sp_configure 'show advanced options', 1;
RECONFIGURE
EXEC sp_configure 'xp_cmdshell', 1;
RECONFIGURE
EXEC xp_cmdshell 'bcp database.dbo.table in c:scheduled.csv -S SERVERSQLEXPRESS -T -t, -r -c -e "error.txt"';
This is returning the following error code. I even tried placing the command in a seperate command file and calling that with no success. If I run this from the command line the error file generation does work.
=================================================================
SQLState = HY000, NativeError = 0
Error = [Microsoft][SQL Native Client]Unable to open BCP error-file
=================================================================
Error message when using BULK INSERT as follows:
BULK INSERT database.dbo.table from 'c:unscheduled.csv' with
(FIELDTERMINATOR = ',', ERRORFILE = 'c:error.txt');
Returns the following error message:
=================================================================
Msg 4861, Level 16, State 1, Procedure pro_cedure, Line 9
Cannot bulk load because the file "c:error.txt" could not be opened. Operating system error code 80(The file exists.).
Msg 4861, Level 16, State 1, Procedure pro_cedure, Line 9
Cannot bulk load because the file "c:error.txt.Error.Txt" could not be opened. Operating system error code 80(The file exists.).
=================================================================
The Bulk Insert actually creates a empty error.txt file (0kb) and never preforms the insert, I can not find any examples of anyone using the -ERRORFILE switch on BULK INSERT. Prolly some default security setting to allow file creation/modification I am missing. Anyone help me out? Thanks.
EDIT: SQL SERVER EXPRESS 2005 - WINXP PRO SP2
I get this error when trying to run xp_cmdshell. I have turned on xp_cmdshell via sp_configure and verified it is on (set to 1) by running sp_configure again. The login trying to run xp_cmdshell has sysadmin privileges. If anyone has a solution please let me know.
View 8 Replies View Related
Hi,
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
Hi,
I'm trying to get a record count out of a databse using OLE DB Source and row count tasks but keep getting an error. I set up a variable as int32 and select the variable name in the row count task and when I go to the Input Columns tab to select a field to count, it gives me this error:
Error at Data Flow Task[Row Count[505]]: The component "Row Count" (505) has forbidden the requested use of the input column with lineage ID 32.
I don't even know what this means?
thanks,
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
When running the following statement in SQL 2005, I get the error message "Access is denied":
exec master.dbo.xp_cmdshell 'TYPE \SERVER-BSHAREFILE.TXT'
The following are true about the network:
The SQL Server is installed on SERVER-A.
SERVER-A and SERVER-B are Windows 2003 servers on the same Windows 2003 domain.
The SQL Server and SQL Server Agent services are running under the domain account SQLSERVICE.
SQLSERVICE is a member of the Domain Admins group.
The Domain Admins group is part of the local Administrators group on SERVER-B.
The SQLSERVICE account has also explicitly been given Full Control to the folder referenced by \SERVER-BSHARE
xp_cmdshell use has been enabled on the SQL Server.
If I run the following command in SQL:
exec master.dbo.xp_cmdshell 'whoami'the following is returned: DOMAINSQLSERVICE
If I change the command to access the c: drive instead of a network drive, it executes successfully.
Can anyone shed some light on why I still cannot access any of the files in this folder using xp_cmdshell?
Tim
Hi,
I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties
Result Set : None
ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Thanks in Advance.
This error occurs when the ActiveX task tries to execute:
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.
Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.
hello
I have a problem with Sql task
when sql task tried to assing a value to my variable I have this error ""La valeur n'est pas comprise dans la plage attendue."
I'm using ODBC connexion for a csv file
someone can help me ?
thanks
hi chaps
i m getting the following ERROR:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "JDETimezone": "Unable to find column Timezone in the result set.".
i know what the problem is i.e. no row is returned then what is the problem
here you are.... i want to it work... strange... ok i explain...
actully i have some processign to do with variable JDETimezone even no row is returned.... can u tell me the alternative to do the follwing task...
I want to retrieve a record from some table and do some processing and if no row is present or returned then i want to do seperate processing.... can ne one help me out ?
regards,
Anas
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
i set up a WMI Reader Task which works perfectly fine.
But when i Use WMI event watcher i get this error.
if the problem is with access rights how do i need to set or how can i figure out if i have rights..
[WMI Event Watcher Task] Error: Watching for the Wql query caused the following system exception: "Invalid class". Check the query for errors or WMI connection for access rights/permissions.
I am using SQL Server 2005 - CTP June 2005 and I am trying to create a simple FTP task. Currently, my package consists of one FTP Task object in the Control Flow tab. I create a new FTP Connection Manager using <New Connection> in the FtpConnection property and verify the connection by selecting the "Test Connection" button. So far so good. However, when I return to the designer a red X appears in the FTP Task object with the following error:
View 5 Replies View RelatedI created a FTP Task to connect to an external FTP Server and download files nightly. I can connect using the FTP Connection Manager but when I execute the task, it says "[FTP Task] Error: Unable to connect to FTP server using "FTP Connection Manager". Any ideas?
View 6 Replies View Relatedi have really hard time with this.it sits there showing yellow or it neither runs...
how should this be actually set?
Hi,
I get this error when I execute a job calling a dts pkg. The package itself is fine and executes without any error.It's transferring around 400000 records. Shceduling the pkg gives the following error.
Can any body led a hand please?
DTSStep_DTSDataPumpTask_1 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 1000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 1000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 2000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 2000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 3000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 3000 DTSRun OnProgre... Process Exit Code 1. The step failed.
Thanks in advance
Barath M
I have an odd problem with the parameters in a SQL task.
I created a DTS package with an SQL task that uses a parameter marker in the WHERE cause. The value comes from a Global Var. The package runs fine but when I try to access the parameter mapping page I get this:
Syntax Error or Access Violation Error
Anybody know what to do about this?
It's not very efficient to have to rebuild the task every time I need to add a parameter.
Thanks